Replacing the old main rising, distribution pipeline and auxiliary items of Water Works at Juni Road, BBMB Pandoh H.P

Dismantling stone masonry/Rubble masonry including stacking of serviceable materials and disposal of unserviceable materials. Dismantling of outside chamber(b) in cement

Excavation manually intrenches for pipelines with straight or open cutting in streets and lanes in built up area where width of street / Lane from wall to wall is less than3meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rainwater, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from thesiteupto15meter distance complete in all respects. (a) Earth work upto 1.5 m. Dept. (iii) For semi conglomerate soil of having gravel/Boulder upto 50%

Dismantling flanged Joints for Cast iron Pipes, Valves and specials complete in all respects. b) 125mm, 150mm, 175mm, 200mm, 225mm and 250mm internal Dia meter of pipe, valves or special.

Dismantling flanged Joints for Cast iron Pipes, Valves and specials complete in all respects.(c)300mm,350mmand375mminternal diameter of pipe, valves or special

Taking out dismantled Cast Iron flanged or socketed/G. I/D. I Pipes valves and, specials etc. outside from the trenches and stacking the same as desire by Engineer-in-charge complete in all respects. b) Upto 200mm internal diameter of pipe.

Taking out dismantled Cast Iron flanged or socketed/G. I/D. I Pipes valves and, specials etc. outside from the trenches and stacking the same as desire by Engineer-in-charge complete in all respects. c) Upto 200mm internal diameter of pipe.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.For Outside Chamber (a) PCC Grade M15

Brick Masonry Work in Cement Mortar1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.

12.5 mm thick cement plaster 1:3

Providing of MS/GMS/API pipe.I) 300mm dia pipe, 4.8mm thickness(37.77kg/mtr.)

Providing, laying, fixing and testing M.S. pipe lines as per IS-1239and specials such as tees, bends, sockets, elbows etc. intrenches in the ground including cutting, threading and testing etc. complete.(d) 200mm internal diameter (thickness 6.00 mm)

Providing, laying, fixing and testing M.S. pipe lines as per IS-1239and specials such as tees, bends, sockets, elbows etc. intrenches in the ground including cutting, threading and testing etc. complete.(c) 150mm internal diameter (thickness 4.85 mm)

Laying jointing of pipe including cutting, placement in position.I) 300mm dia pipe (suction Pipe) = 12.19mtr II) 300mm dia pipe (Main rising inside PH) = 18mtr III 300mm dia pipe (Main rising outside PH) = 20mtr

Welding charges for butt/Flanges per welding joint of 300mm dia pipe (O.D=32.39cm)

Providing & fixing C.I/D. I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge) (B) Class PN-1.6 as per ISI(f) 300mm i/d Sluice Valves flanged

Providing & fixing C.I/D. I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge) (B) Class PN-1.6 as per ISI

Providing & fixing C.I/D. I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge) (B) Class PN-1.6 as per ISI (c) 150mm i/d Sluice Valves flanged

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt, rubber insertion etc. complete. Note: If non-return valves class PN-1.6 is used instead of classPN-1.0, than5%will be paid extra.(B) Class PN-1.0 as per ISI with gun metal flap (g) 300mm i/d non-return valve

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt, rubber insertion etc. complete. Note: If non-return valves class PN-1.6 is used instead of classPN-1.0, than5%will be paid extra.(B) Class PN-1.0 as per ISI with gun metal flap (d) 150mm i/d non-return valve

Providing and fixing S.S Pressure Gauge complete as required complete in all respect.(a) Dial diameter 150mm calibration 0-16 Kg/cm2

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.For Drainage System of pump house (i) 100mm i/d

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Please Enable Macros to View BoQ information