E.T.No.-EDC(USN)58/2025-26

Annexure -A ( Works )

S/F Bajaj/Havaells /Orient or equivalent simple batten superlite 36/40W 230V cop fluorescent tube fitting complete with all labour material, T&P etc. required for proper completion of work.

Providing and Installing 5HP, 3Phase submersible pump set water filled including testing and commissioning complete.(Based on market rate.)

Providing and fixing 35mm x 6mm G.I strip on surface or in recess for connections etc. As required.

Supply of Gravel & spreading in switch yard area with 20mm nominal size in required thickness as directed by Engineer-In-Charge.

Repairing of Plinth as per Direction of Engineer in Charge.

Excavation of Trench in all soil by earth work in excavation by mechanical means / manual means over areas cc/hard rock.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all works upto plinth level (i) 1:4:8 (1 - cement; 4-coarse sand; 8-graded stone aggregate 40mm nominal size).( foundation, footings, bases of columns, etc for mass concrete).

Cement Plaster Work as per Direction of Engineer in Charge.

Supply & Fixing of 70W LED Light as per Direction of Engineer in Charge.

Repairing of Damage Light & Fan Wiring as per Direction of Engineer in Charge.

Filling of soil for Leveling of Yard as per Direction of Engineer in Charge.

Errection of new Boundry Wall as per Direction of Engineer in Charge.

CC Form Swithyard Ratio 1:4:12 as per Direction of Engineer in Charge.

Fencing of Yard as per Direction of Engineer in Charge.

Making Special type separate earthing for neutral /body of Power transformer by digging 3x4x12 feet deep pit at corner of Swithchyard with duly provided 1 No. coal Iron earth plates of size 18''x18''x½'' jointing them with 6'' long bolt duly coverod with layer of softcoal 60 Kg. and salt 20 Kg. (Total 80 Kg.) connecting them with the main erath mat, The earth plate shall be connected with 35x6 mm GI Strip and GI strip shall be laid upto the neutral and T/F body separately (Including supply of steel).

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approved drawing.

Painting of Isolator / LA/CT/Structure complete.

Digging of trench of size 0.60x0.15x1.5 mtr. and laying of underground 11 KV XLPE cable with making of brick housing and filling of sand including filling of earth with ramming. & repairing of road including cost of cement sand and stone blast

Digging of trench of size 0.60x0.15x1.5 mtr. and laying of underground 33 KV XLPE cable with making of brick housing and filling of sand including filling of earth with ramming. & repairing of road including cost of cement sand and stone blast

Cement Plaster on side walls in 1:4 ratio on DTR Plinth.

Jointing and fixing of cable jointing kit indoor/outdoor 11 KV XLPE heat shrinkable cable boxes.

Jointing and fixing of cable jointing kit indoor/outdoor 33 KV XLPE heat shrinkable cable boxes.

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 21-50 Km)

Shifting of 12.5 MVA Power Transformer at work site place with the manual pulling.

Laying of Control cable of all sizes through trench, proper connection at both ends outside in switchyard equipments & inside control room in VCB, control & relay Panels with proper marking, lugs, labelling & ferrules etc

Supply, erection with grouting, muffing & painting of street light pole of size ST pole SP-10.

Painting of Transformer as per Direction of Engineer in Charge.

Repairing of old damaged trench including fabrication, fixing of MS angle 50/40X6 mm size (excluding cost of MS angle/ MS bar) on side edge with all excavation, CC work, brick work, fixing of cable support angle one/two tier as required with stopper arrangement at 0.5 mtr gap throughout the length of the trench, making of cable trench covers with MS Bar welded mesh angle frame with lifting hooks, fixing of perforated tray complete as per drawing including cost of sand, cement, bricks, metal etc.

Annexure - B (Supply) (As per UPCL Norms)

Supply of Cable Holding GI Clamp.

Supply of J/KIT for 3x400Sq.mm 11 KV XLPE Cable I/D-D.

Please Enable Macros to View BoQ information