REPAIR, PAINTING AND POLISHING OF VARIOUS WOODEN AND STEEL FURNITURE ITEMS AT AF STN DWARKA AND KHAMBALIYA UNDER GE (AF) JAMNAGAR NO 1

Amount

Removing the following old and unserviceable parts / components of “ALMIRAH LARGE / MED / SMALL STEEL ” and S&F new parts / components of same size, existing pattern and same material, with appropriate welding or screw & painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1031 & 1032)

MS lock 6 levers best quality with brass levers & duplicate key (Make:- Harrison/Samrat/Lico)

Mild steel chromium plated handle 125 mm size. Make : link/Lico/MK/Man

Three way locking assembly with iron plate and two rods 10 mm dia and lock cover as per drawing.

Leg made out of 1.00 mm thick mild steel plane black sheet size as per drawing including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

Conversion of Charpoy GI Pipe Nylon Newar to Charpoy GI Pipe Plywood top by removing nylon Newar and S&F of 12mm thick ply, ISI mark, BWR Grade as per IS 303 of size 1980mm X 900mm by fixing with 12Nos nut and bolt of suitable size with GI washer along with provision of 25mm square MS pipe stiffener 02 Nos of 1.6mm thick conically/slanting cut at the ends to continuously welded on all four sides to flush with the top of long rail as directed by GE.The MS pipes shall be painted with two coats of synthetic enamel black paint over a coat of red.Make:Kitply/Greenply/Centuryply/Archidply (FD-220)

Removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI pipe 32mm bore (ISI marked) medium grade including threading both sides all as specified in drg & directed by Engr-in-charge. Make: Jindal/Tata

Removing of old damaged/broken short rail from charpoy and making of short rail from unserviceable long rail retrieved from ser No.2.01 above incl threading & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing of old damaged/broken short rail from charpoy and making leg from unserviceable short rail retreived from ser No.2.02 above incl threading, S&F 3mm thick MS plate in bottom to be welded with legs & fixing in charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing old broken / damaged GI elbow and S&F new GI elbow 3way 32mm bore (ISI marked) to charpoy GI pipe all as specified in drg & directed by Engr-in-charge.

Removing the existing unserviceable plywood from CHARPOY IP HARD TOP, & supply and fix 12 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / MAP - II / 01)

Removing old and unserviceable parts / components of “chair tubular office steel with / without arms” and S&F new parts / components of same size, existing pattern and with appropriate welding or screw, painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-75 (M)

Second class HW seat frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete.

Second class HW back frame including black enamel painting and woven with 2.00 to 2.5 mm wide white / pale cream plastic cane as per GODREJ pattern complete

Second class HW hand rest including black enamel painting.

Rubber shoe with suitable screws.

Removing the existing unserviceable plywood from BED HARD STEEL, & supply and fix 12 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ Map / 08 (R))

Removing the existing unserviceable pre-laminated particle board from head rest of Bed Hard Steel, and S & F 18/19 mm pre laminated particle board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP / 08 (R))

Removing the existing unserviceable pre-laminated particle board from foot rest of Bed Hard Steel, and S & F 18/19 mm pre- laminated particle board of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6/ MAP / 08 (R))

Removing the existing unserviceable ply wood from Charpoy GI Pipe ply top and S & F 12 mm thick BWR plywood, ISI marked of same size, existing pattern with beading, screw etc complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 220)

Removing following old and unserviceable parts / components of “Chair School Hand Board” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD / E6 / MAP / 05)

S & F in repair PVC Seat & back one piece of chair school with hard board. (Drg No.FD/ E6/ MAP/ 05) Make:- Blowplast / Supreme / Cello / National, Amko)

Removing old unserviceable tops from chair school hand board and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Hard rubber shoe.

Removing following old and unserviceable parts / components of “TABLE OFFICE CLERK STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1004)

Removing old unserviceable tops from table office clerk steel and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Removing of unserviceable / broken / Damaged / Rusted drawers from existing table office clerk steel and S&F new drawers made out 1mm thick MS sheet all as specified in drg & directed by Eng-in-charge.

M&L for removal of existing unserviceable lock of any description in any position, S&F new lock (brass) 6levers (Make: Voltas/Bajrang/lico) with duplicate key including fixing with suitable machine screws complete all as specified and directed by Engineer-in-charge.

Preparation of existing old decorated surfaces of the table office clerk steel after repairs &removing the dents, filling with putty and spray painting one coat of synthetic enamel paint with first grade quality of paint external/internal as shown on drawing as specified and directed by the Engineer-in-charge.

Replacement of rubber shoe with S &F new hard rubber shoe of superior quality completed as approved and all as shown on drawings.

Removing following old and unserviceable parts / components of “TABLE OFFICE OFFICER STEEL” and S&F new parts / components of same size, existing pattern with beading, screw & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1003)

All as per item No 8.01 above but for Table Office Officer steel

All as per item No 8.02 above but for Table Office Officer steel

All as per item No 8.03 above but for Table Office Officer steel

All as per item No 8.04 above but for Table Office Officer steel

All as per item No 8.05 above but for Table Office Officer steel

Removing following old and unserviceable parts / components of “PEG TABLE” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-236 & 277)

Removing old unserviceable tops from Peg table and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE CENTRE” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-235 & 274

Removing old unserviceable tops from Table center and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TEAPOY WOODEN” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-232 & 278

Removing old unserviceable tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE 3 x 3 WOODEN” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-88 M, 291

Removing old unserviceable tops from Table 3 x 3 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Removing following old and unserviceable parts / components of “CHAIR DINING ” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-279

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

Long / short rail of seat made of first class hard wood (teak wood).

Stiffener of back made of first class hard wood (teak wood).

Short & long stiffener of bottom made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE DINING 6 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-239 & 273

Removing old unserviceable tops from Table dining 6 persons and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Legs made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long rail for TABLE DINING 6 PERSON made of first class hard wood (teak wood).

M&L for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge.

M&L for cushion foam of 40 density with fabric cushion cover for seat of SOFA SET 5 / 4 seater, Superior quality of foam & cover. (Drg No FD-281)

Removing following old and unserviceable parts / components of “CHAIR EASY” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229)

Front / Rear legs made of first class hard wood (teak wood).

Arm rest made of first class hard wood (teak wood).

Seat Front / Rear / side rail made of first class hard wood (teak wood).

Back Upper / bottom rail made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “CHAIR WRITING ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

Front / Rear / Side rail of seat made of first class hard wood (teak wood).

Stiffener of Back made of first class hard wood (teak wood).

Short / long stiffener of bottom made of first class hard wood (teak wood).

Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No 224, 283)

Removing old unserviceable tops from Table 3 x 2 and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge.

Leg made of first class hard wood (teak wood).

Long rail made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long bottom stiffeners made of first class hard wood (teak wood).

Short bottom stiffeners made of first class hard wood (teak wood).

Complete drawer made out of 12 mm thick plywood.

M&L for repairing of Looking Mirror by replacement of 5 mm thick mirror with back plywood 6 mm thick screw & teak wood beading of same size including brackets, existing pattern and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No. NO.FD/E6/MAP/16)

M&L for spot Welding of steel items of broken joints etc not exceeding 2.5 cm in length and thickness of weld 6 mm, including scraping preparing surface of welded portion by grinding and buffing to match with existing.

S & F wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail various type of wooden table fixed with 2 Nos screw and duly polishing to match with existing complete as direction by Engr-in-charge.

Removing following old and unserviceable parts / components of “LOCKER BED SIDE STEEL” and S&F new parts / components of same size, existing pattern with welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-1029)

M&L for removal of existing unserviceable lock of any description in any position, S&F new lock (brass) 6 levers (Make: Voltas/Bajrang/lico) with duplicate key including fixing with suitable machine screws complete all as specified and directed by Eng-in-charge.

M&L for removal of existing unserviceable handle, S&F new chromium plated handle 100mm long including fixing with suitable nut/pins as specified and directed by Eng-in-charge.

M&L for removal of existing unserviceable conduit pipe, S&F new MS chromium plated conduit 19mm dia all as specified and directed by Eng-in-charge.

M&L for continuous gas welding at damaged portions/joints all as specified and directed by Eng-in-charge(each joint to be measured separately)

M&L for removal of complete dents, filling with putty, preparation of old painted surfaces and one coat of spray painting of approved shade(synthetic enamel paint) complete for internal/external surfaces all as directed by Eng-in-charge for locker bed steel.

M&L for re-canning of CHAIR VERANDAH using 4 mm wide half round plastic cane of pale cream / white colour of superior quality in mat design including removal of old plastic cane and including preparation of old painted surface of chair frame and applying two coats white synthetic enamel paint all as specified and shown in Drg and as directed by Engr-in-Charge. (Drg No FD - 256)

Supply and fix in repair hard rubber shoe to chair verandah / chair verandah steel (Drg No FD - 256, FD / E6 / MAP / 11)

Removing following old and unserviceable parts / components of “RACK SHOE STEEL” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, nut, bolt, & welding etc and painting to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/E6/MAP/ 02/R)

shelves made of 25 mm conduit pipe & 3 mm MS wire mesh

Conduit pipe frame

M&L for Preparation of old painted surfaces of the following steel furniture article including removal of dent etc wherever necessary, and Painting with one coat of synthetic enamel paint with spray gun as per existing colour and all as specified and directed by Engr-In-Charge:-

Almirah med steel (Drg No - FD 243 / 1032

Almirah large steel (Drg No - FD -1031

Chair steel tubular with & without arms Drg No - FD-75 M

Rack Shoe Steel (Drg No - FD E6 MAP 02)

Bed hard steel Drg No - FD / E6 / MAP / 8 (R)

Charpoy IP with hard top (Drg No - FD / E6 / MAP - II / 01)

Chair School Hand Board Drg No FD / E6 / MAP / 05

Chair Verandah Steel FD / E6 / MAP / 11

M & L for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth and applying one or more coat of French polish / clear Varnish as directed by Engr-in-Charge :-

Chair dining (Drg No-FD 279)

Chair easy (Drg No-FD-229)

Chair writing (Drg No-FD 250,280)

Peg table (Drg No-FD 25M,277)

Sofa set 4/5 seater (Drg No-FD 281)

Table dining for 6 persons (Drg No - FD 239,273)

Table writing (Drg No - FD 249,275,33)

Table centre (Drg No - FD-274)

Table dressing gents with mirror (Drg No - FD 23,238)

Table dressing ladies with mirror (Drg No - FD 378,251)

Teapoy (Drg No - FD-232,278)

Table 900 x 600 x 760 with drawer (Drg No - FD 224,284,283)

Table 3' X 3' Wooden (FD- 291)

motwani and associate

SIBS CONTRACTOR

Dhangot Brothers