WBPWD/EE/NIQ15e/2021-2022

Amount

SUB HEAD -I (FIRE HYDRANT SYSTEM) Under Ground Piping Supply, erection, testing & Commissioning of MS black steel pipe Heavy Grade conforming to IS : 1239Part - 1/3589 including all fittings viz. Elbows, tees, flanges, etc. reduces, clamps, included with joints complete with anticorrosive treatment to burried pipes by wrapping with two coats of 4mm thick PYPKOTE membrane applied over a coat of primer including all mending good damages for roadwork pavement etc. . (Make: TATA/JINDAL) (Any existing surface which are required to be excavated removed for execution of this work then the bidders have to rectify the same to its original shap as per the direction of Engineer-in-Charge.)

Above Ground Piping: Supply, erection, fabrication, testing & commissioning of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1/3589 including all fittings viz. Elbows,tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface. (Make: TATA/ JINDAL) (Any existing surface which are required to be excavated removed for execution of this work then the bidders have to rectify the same to its original shap as per the direction of Engineer-in-Charge.)

Supply, installation, testing & Commissioningof SS oblique type single Landing valve with 80 mm inlet and 63 mm outlet SS instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket, nuts and bolts complete. (Make: Fire Shield/Shah/Safeguard)

Supply, installation, testing & Commissioning of SS oblique type single Hydrant valve with 80 mm inlet and 63 mm outlet SS instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket. nuts and bolts complete. (Make: Fire Shield/Shah/Safeguard)

Supply, installation, testing & Commissioning of 63 mm dia rubberized reinforced rubber line hose pipe In 15 m length conforming to IS : 636 Type II lSI marked with gunmetal male and female instantaneous coupling conforming to IS 903 wounded with 18 SWG copper wire complete. (Make: Fire Shield/Shah/Safeguard)

Supply Installation,Testing & Commissioning of ISI marked water branch pipe with nozzel as per IS 903/93 (Make: Fire Shield/Shah/Safeguard)

Supply Installation, Testing & Commissioning of MS hose box of fabricated from 16 SWG CRCA sheet double door with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. (750x600x250 mm) (Make: Fire Shield/Shah/Safeguard)

Supply & installation of swinging type Hose Reel Drum fabricated from 14 SWG CRCA sheets painted with red colour stove paint 2 coats over 1 coat of primer with 30 m long 20 mm dia rubber hose pipe with 10 kg/sq cm working pressure with 25NB GM Globe Valve and GM self closing shut - off nozzle of 5 mm outlet fixed on wall with dash fasteners. (Make: Fire Shield/Shah/Safeguard)

Supply Installation, Testing & Commissioning of ISI marked 25 NB Air release valve on raiser (Make: FC/ Koley/ Kalpana)

Supply & fixing of 25 NB Ball VALVE conforming to IS:778 (Make: Leader/Laxhmi)

Supply Installation, Testing & Commissioning of Pressure Gauge (150mm dia) IS:3624-1979 (Make: H Guru)

Supply of 15NB Ball Valve as per IS:778 (Make: Ledder/ Lakshmi/ Reputed)

Supply Installation, Testing & Commissioning of Gunmetal 4 way collecting head with 63 mm dia instantaneous type inlet 150 dia flanged outlet without built in check valve for fire brigade connection (IS : 904) (Make: Fire Shield/Shah/Safeguard) with one no. butterfly valve & NRV of 150NB size (Make: FC/Koley/Kalpana)

Supply Installation, Testing & Commissioning of ISI marked CI Sluice Valveto IS-14846 PN -1.6 with companion flanges,gaskets,nut & bolts. (Make: FC/ Koley/ Kalpana)

Supply Installation, Testing & Commissioning of CI Butterfly valve wafer type with CS Shaft and Nitrile Rubber Seat with components flanges,nut & bolts. (Make: FC/ Koley /Kalpana ) 150 NB

Supply Installation, Testing & Commissioning of ISI marked CI Non return Valve IS-5312 with components flanges,gaskets,nut & bolts (Make: FC/ Koley/ Kalpana)

Supply, installation, testing & commissioning of 12 Volt 175 Ah Self-maintenance free Battery (make: Exide)

Servicing, Testing and re-commissioning of Motor Driven Main Fire Pump set as per specification and direction of the Engineer-in-charge all complete

Servicing, Testing and re-commissioning of Motor Driven Jocky Pump set as per specification and direction of the Engineer-in-charge all complete

Checking, Rectification, Overhauling, Oiling, Testing and re-commissioning of Diesel Engine Driven. Pump set as per specification and direction of the Engineer-in-charge all complete

Dismentaling and Re-Installation of Diesel Engine Fuel Tank with structural support.

Existing Hydrant System inside the main building, Boy's Hostel building and Girl's Hostel building only Checking, Testing, Rectification and Re-commissioning of all Pipes, Valves etc.

SUB HEAD - II (SPRINKELER SYSTEM) Under Ground Piping Supply, erection, testing & Commissioning of MS black steel pipe Heavy Grade conforming to IS : 1239Part - 1/3589 including all fittings viz. Elbows, tees, flanges, etc. reduces, clamps, included with joints complete with anticorrosive treatment to burried pipes by wrapping with two coats of 4mm thick PYPKOTE membrane applied over a coat of primer. (Make: TATA/JINDAL) (Any existing surface which are required to be excavated removed for execution of this work then the bidders have to rectify the same to its original shap as per the direction of Engineer-in-Charge.)

Above ground Piping Supply, erection, fabrication, testing & commissioning of MS black steel pipe Heavy grade conforming to IS : 1239 Part -1 /3589 including all fittings viz. Elbows, tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface. (Make: TATA / JINDAL) (Any existing surface which are required to be excavated removed for execution of this work then the bidders have to rectify the same to its original shap as per the direction of Engineer-in-Charge.)

Supply Installation, Testing & Commissioning of ISI marked CI Sluice Valveto IS-14846 PN -1.6 with companion flanges,gaskets,nut & bolts. (Make: FC/ Koley/ Kalpana)

Supply Installation, Testing & Commissioning of CI Butterfly valve wafer type with CS Shaft and Nitrile Rubber Seat with components flanges,nut & bolts. (Make: FC/ Koley /Kalpana )

SITC of UL listed constant pressure type 150NB UL listed flange mounted installation Control Valve with water motor Gong and call accessories. (Make: HD / Viking)

Supply Installation, Testing & Commissioning of ISI marked 25 NB Air release valve on raiser (Make: FC/ Koley/ Kalpana)

Supply & fixing of 25 NB Ball VALVE conforming to IS:778 (Make: Leader/Laxhmi)

Supply Installation, Testing & Commissioning of Pressure Gauge (150mm dia) IS:3624-1979 (Make: H Guru)

Supply of 15NB Ball Valve as per IS:778 (Make: Ledder/ Lakshmi/ Reputed)

Supply, erection, jointing, testing and commissioning of Quartz Bulbe Sprinkeler head operating Temperature 68deg. C with all accessories. (Make: HD / Viking)

Existing Sprinkler System inside the main building only Checking, Testing, Rectification and Re-commissioning of all Pipes, Valves etc

SUB HEAD - III (PORTABLE FIRE EXTINGUISHER) Supply Installation,Testing & commissioning of ISI marked & ISO certified ABC Automatic Modular type fire extinguisher 5 Kg capacity conforming to IS 15683 (Make: Fire Shield/Shah/Safeguard)

Removing, Dismantling, cutting of different dia pipelines of existing fire-fightiing system as an where required and as per direction of Engineer-in-Charge. (Any existing surface which are required to be excavated removed for execution of this work then the bidders have to rectify the same to its original shap as per the direction of Engineer-in-Charge.)

Performing and acting as liason agency to obtain the no objection certificate from Fire & Emergency Service Department, Government of West Bengal after satisfactory completion of work in paring with the prevailing fire norms. (Excluding Department fees)

NILEX FIRE PROTECTION SYSTEMS

SWAMIJI ENGINEERS CO OPERATIVE SOCIETY LTD

MAM ENTERPRISE

Fire Guard Syndicate

KSA SAFETY SHIELD PVT. LTD.