Electrification of new control room building at 110kV Substation Kanjikode in connection with Capacity Enhancement and 110kV Bus Extension at 110kV Substation, Kanjikode

Amount

Supply, installation, testing & commissioning of totally enclosed free standing floor mounting dust & vermin proof indoor cubicle type IP42 panel board suitable for 415V, 3 phase, 50Hz supply with provision for fixing incoming & outgoing switches fabricated using 14SWG MS sheet powder coated with necessary cable alley & bus bar chamber for all switches. With all accessories and front access as per the technical specification. The single line diagram of panel is attached separately. The LTAC panel shall have 1.250A, 4P, 50kA MCCB with spreader and extended ROM and shunt trip – 2 set 2.63A, 3P, MCCB with spreader and extended ROM – 10 set 3.125A, 3P, MCCB with spreader and extended ROM – 4 set 4.Low-set earthfault relay – 2 set 5.CT 100/5A, Class 1, resin cast – 6 nos 6.CT 50/1A, Class 5P10, 15VA, resin cast – 2 no 7.Multi-function digital meters – 2 nos 8.kWH meters – 2 nos 9.Phase sequence indicators – 2 set 10.ON/OFF/ trip indication with control MCB and auxillary contact –3 nos each- 16 set 11.Current transducer -2 12.Voltage transducer-2 13.RYB indication lamp, LED type - 6 Nos 14.Mechanical interlocks between incomers (Castle key) charges etc complete

Bidder Name

Amount

CARMEL ENGINEERS (GSTN-32ACYPA5794M1ZW) BID ID -1928962

MINDAAS SOLUTIONS (GSTN-32BFBPJ8667P1ZV) BID ID -1931288

Easwari Electricals(GSTN-NA)--1931225

Description of Work / Item(s)

Summary

Enter GST in percentage for supply BOQ - 1 (if GST not applicable enter '0') eg:- for 18% GST enter only 18

Enter GST in percentage for labour BOQ - 2 (if GST not applicable enter '0') eg:- for 18% GST enter only 18

Easwari Electricals

CARMEL ENGINEERS

CARMEL ENGINEERS

Easwari Electricals

Easwari Electricals

CARMEL ENGINEERS