ICDS 2025-26.CONST.OF AGANWADI IN VARIOUS VILLAGES OF AMBIKA TALUKA DIST SURAT.PACKAGE NO.1 TOTAL 4 NOS.1. CONSTRUCTION OF AANGANWADI BAMANIYA-1, AT VILLAGE - BAMANIYA, TA: AMBIKA, DIST-SURAT.2. CONSTRUCTION OF AANGANWADI AT VILLAGE - KADHAIYA, TA: AMBIKA, DIST-SURAT.3. CONSTRUCTION OF AANGANWADI ALGAT-3, AT VILLAGE - ALGAT, TA: AMBIKA, DIST-SURAT.4. CONSTRUCTION OF AANGANWADI MAHURIYA-4, AT VILLAGE - MAHURIYA, TA: AMBIKA, DIST-SURAT.

Name of Work:-ICDS 2025-26. CONST.OF AGANWADI IN VARIOUS VILLAGES OF AMBIKA TALUKA DIST

SURAT.PACKAGE NO.1 TOTAL 4 NOS.[1]CONSTRUCTION OF AANGANWADI BAMANIYA-1, AT VILLAGE -

BAMANIYA, TA: AMBIKA, DIST-SURAT.[2]CONSTRUCTION OF AANGANWADI AT VILLAGE - KADHAIYA, TA:

: : BILL OF QUANTITY.' : :

Percentage Rate Tender

It. Description of Item (with brief Specification and Rate In

Quantity Unit Amount

No. reference to book of specifications) Figures

1 Excavation for foundation upto 1.5 m depth 295.28 Cum. 122.93

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead. (A) Loose or soft soil

2 Excavation for foundation upto 1.5 m to 3.0 m depth 51.84 Cum. 136.47

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead. (A) Loose or soft soil

3 Filling available excavated earth (excluding rock in 259.72 Cum. 136.91

trenches plinth, slides of foundations etc. in layers

not exceeding 20 cm in depth consolidating each

deposited layer by ramming and watering)

4 Filling in foundation and plinth with murrum or 48.00 Cum. 301.77

yellow soil selected soil in layers of 20cm thickness

including watering ramming and consolidating etc.

5 Filling in plinth with sand under floors including 36.00 Cum. 481.80

watering ramming, consolidating and dressing

6 Providing and laying cement concrete 1:2:4 (1- 53.32 Cum. 3923.85

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork in (A) Foundation and Plinth (more

7 Providing and laying controlled cement concrete M- 35.28 Cum. 4563.18

200 and curing complete including the cost. of form

work but excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations footing

base of columns and the like and mass concrete

8 Providing and laying controlled cement concrete M- 16.24 Cum. 8001.22

200 and curing complete including the cost of form

work but excluding cost of reinforcement for

reinforced concrete work for Column upto plinth

level & Ground Floor

9 Providing and laying cement concrete M.200 and 2.00 Cum. 8042.18

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts, upto Terrace Floor

10 Providing and laying controlled cement concrete 41.44 Cum. 6321.59

M.200 and curing complete inculding the cost of

formwork but Excluding the cost of reinforcement for

reinforced concrete work in All Types of Beams,(E)

Beam, upto All Floor.

11 Providing and laying controlled cement concrete 26.08 Cum. 6267.05

M.200 and curing complete inculding the cost of

formwork but Excluding the cost of reinforcement for

reinforced concrete work in All Types of Slab,All

Thickness (C) Slab upto Plinth and upto All Floor.

12 Providing and laying controlled cement concrete 3.20 Cum. 5865.08

M.200 and curing complete inculding the cost of

formwork but Excluding the cost of reinforcement for

reinforced concrete work in Lintel upto All Floor.

13 Providing and laying controlled cement concrete 3.60 Cum. 6886.18

M.200 and curing complete inculding the cost of

formwork but Excluding the cost of reinforcement for

reinforced concrete work in Chajja. upto All Floor.

14 Providing and fixing TMT bars Fe-500D steel 14476.36 kg 77.31

reinforcement for R.C.C. work including binding,

bending and placing in position complete upto floor

two level ,Ground Floor, First Floor , Second Floor,

Third Floor, Terrace Floor (all floor).

15 Brick work using common brunt clay building bricks 41.56 Sqmt 4214.32

having crushing strength not less than 35 kg/sqcm. in

foundation and plinth in cement mortar 1:6 (1

cement :6 fine sand) etc.comp. (B) Conventional

Ground floor upto Plinth

16 Brick work using common brunt clay building bricks 92.84 Cum. 4503.04

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level

in cement mortar 1:6 (1 cement :6 fine sand)

etc.comp. (B) Conventional Ground Floor

17 Brick work using common brunt clay building bricks 27.64 Cum. 4545.16

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level

in cement mortar 1:6 (1 cement :6 fine sand)

etc.comp. (B) Conventional First Floor

18 Half brick masonry in common brunt clay building 21.36 Sqmt 629.83

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in (B) Conventional Ground Floor

19 Providing 15mm thick cement plaster in single coat 607.64 Cum. 161.19

on Rough (Similar)side of single or Full/half brick

walls for interior plastering upto floor two level and

finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) Ground Floor

20 Providing 15mm thick cement plaster in single coat 120.24 Cum. 185.75

on Rough (Similar)side of single or Full/half brick

walls for interior plastering and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

21 Providing & laying10 mm. thick cement plaster in 217.80 Sqmt 148.31

single coat on fair side of ceilings for interior

plastering upto floor two level and finishing with

smooth mala plaster.(i) Cement mortar 1:4 (1 cement

: 4 sand) Ground Floor

22 20mm thick sand faced cement plaster on walls upto 602.84 Sqmt 315.68

height 10 metres above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete. Upto Ground Floor t

23 Providing and laying polished Granite Slab 18mm 28.80 Sqmt 2190.69

thick in Flooring laid 20mm thick Cement Mortar 1:4

(1-Cement : 4-Coarse Sand) and jointed with Grey

Cement Slurry including full molded round front

edges , rubbing and polishing etc. complete.

24 Providing and laying polished Granite Slab 18mm 78.32 Sqmt 2159.38

thick in Risers of steps Dedo, window sill, jembs and

pillars laid 10 mm thick Cement Mortar 1:4 (1-

Cement : 4-Coarse Sand) and jointed with Grey

Cement Slurry including full molded round edges

25 Providing and laying Vitrified tiles 8 to 10 mm thick , 188.20 Sqmt 1120.36

24'' x 24'' in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing

in white cement.Soluble Salt PVT. Tiles in All Rooms.

26 Providing and laying Vitrified tiles 8 mm thick , 24'' x 97.92 Sqmt 1195.02

24'' in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry Soluble Salt PVT.

Tiles in All Rooms.

27 Providing and fixing flush door both sides laminated 31.92 Sqmt 2838.10

andshutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat

pressed wood based exterior grade bonded

BWP/BWR synthetic resin having stamped IS

grade I type II including three coats of lacquer

polishing to exposed wooden surfaces and Stainless

steel decorative type designs fixtures / fastening

2Nos. Handles, 2Nos. Aldropes, towerbolt etc. as per

architectural detailed drawing and as directed by

engineer in charge..

28 Providing and fixing window having extruded 17.28 Sqmt 1583.95

aluminum Colour anodized section frame main outer

size 66.00 x 50.00 x 1.50 mm(Wt 1.40 Kg / Rmt),

horizontal two track member size Both Side 66.00 x

50.00 x 1.50 mm(Wt 1.40 Kg / Rmt), with sliding

shutters of horizontal member size 66.00 mm x

mm x 1.50mm (wt.of 0.90 Kg/mt), vertical member of

size 66.00 mm x 26.00 mm x 1.50mm (wt.of

Kg/mt) with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for

29 Providing and fixing standared extruded of 11.52 Sqmt 1175.55

alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt)

with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

30 Providing and fixing M.S. grill of required pattern of 1141.20 kg 116.15

windows etc. with M.S.. flats at required spacing and

frame alround square or round headed bolts and

nuts or by screws.including applying a priming coat

of red lead paint and two coats of oil painting

31 Applying two coats of Birla (white cement based) or 847.76 Sqmt 40.59

(acrylic lapy- putty) or equivalent & two coats of

primer of approved brand and manufacture on new

wall surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth. with Wall painting (three coats) with plastic

emulsion paint of approved brand and manufacture

on undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

32 Wall painting (two coats) with plastic emulsion paint 847.76 Sqmt 84.36

of approved brand and manufacture on undecorated

wall surface,Ceiling surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

33 Finishing wall with weather proof exterior emulsion 602.84 Sqmt 120.26

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete. Priming: Apply a

liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is

required between each coat of weather shield max

34 Wall painting cartoon types,ABCD,123,Animal 96.00 Sqmt 1161.50

photos,Vegitables & fruit paiting with plastic

emulsion paint of approved brand and manufacture

on undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

35 Providing and laying integral cement based water 217.80 Sqmt 880.72

proofing treatment including preparation of surface

as required for treatment of roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat

cement using 2.75 kg/sqm of cement admixed with

proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the

surface before tratment.

(b) Laying cement concrete using broken bricks/brick

bats 25 mm to 100 mm size with 50% of cement

mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to

,brick bats is finally covered by jointless cement

plaster 20mm th. in C.M. 1:4 added with special

water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is

carried along the vertical surface of the parapet &

other adjoining wall up to height of about 300 mm in

a shape of quarter round vata Incl. curing etc. Comp.

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.'(c) The whole terrace

so finished shall be flooded with water for a

minimum period of two weeks for curing and for final

test. All above operations to be down in order and as

Providingandandspecified by the engineer-in-charge.

fixing Stainless Steel railing having 50 20.00 RMT 3333.50

mm dia hollow stainless steel pipe as hand rail and

32 mm dia hollow stainless steel pipe with

combination of 10 cm long 16mm dia pipe as per

virtical supports 20 mm dia hollow stainless steel

37 Providing and constructing sandwitch type Granite 10.00 RMT 3589.54

stone top & bottom Kota Stone platform 0.6 mt.

wide & 0.75 mt. height, including front granite stone

patti of 10 cm wide, vertical partitions of Kota stone

with cement Mortar(1:1) as required comp as per

instruction given by site in charge at all floors.

38 Providing and fixing Child Friendly wash down water 4.00 Nos 1648.15

closet (European type, W.C. Pan) with integral P or S

trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) inculding

Providing and fixing plastic seat and cover for wash

down water closer with C.P. brass hinges and rubber

buffers. (A) vitreous China Pattern :(i) in white colour

39 Providing and fixing Child Friendly washbasin with 4.00 Nos 2165.90

single hole for pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making

good the Providing and fixing C.P. brass waste for

washbasin or sink. (A) 32mmdia.,Providing and fixing

pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm

dia.,Providing and fixing brass screw down stop

tap.(A) 15mm dia..(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In white

40 Providing and fixing 600mm x 450mm bevelled edge 4.00 Nos 859.41

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

41 Providing and fixing Kitchen sink with C.I. or M.S. 4.00 Nos 3204.92

brackets, painted white including cutting holes in

walls and making good the same (C) S.S. & Sink.(i)

600mm x 450mm x 150mm size with Providing and

fixing C.P. brass waste for washbasin or sink. (A)

42 Providing and fixing PVC SWR Nahni trap IS 14735 for 12.00 Nos 599.63

drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

43 Providing and fixing screw down bib taps of following 16.00 Nos 186.83

size.(A) Brass screw down bib tap polished bright.

44 Providing and fixing Gun metal check or non-return 8.00 Nos 420.63

fullway wheel valve. 25mm. dia.

45 Providing and fixing chromium plated brass half turn 4.00 Nos 263.77

flush cock of approved quality including fixing in pipe

line etc. complete.(ii) 25mm dia.

46 Providing and fixing ball cock of approved. quality as 4.00 Nos 132.89

directed.(A) Copper Metal (A) 25mm. dia.

47 Providing laying and jointing in true line and level 56.00 RMT 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

48 Providing laying and jointing in true line and level 56.00 RMT 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

49 Providing, laying and jointing in true line and level 96.00 RMT 878.56

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diametre

x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

of all materials.

50 Providing and fixing S.W. gully trap with C.I. grating 8.00 Nos 1246.92

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight.(i) Square mouth traps.(B) 150mm x

100mm size P or R type

51 Constructing Brick masonry road gully chamber 8.00 Nos 2017.19

500mm x 450mm x 600mm including 500mm x

450mm C.I. horizontal grating wih frame complete.

52 Constructing brick masonry chamber for 8.00 Nos 2932.93

underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

53 Providing laying (to level or slopes) and jointing 40.00 RMT 257.19

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete. (B) 150 mm d

54 Providing & fixing G.I. Rain water spout of 50 mm.dia 4.00 Nos 101.90

& 30 cm length etc.

55 Providing and fixing in position cowel went to 8.00 Nos 505.17

pipes.(C) 100mm dia

56 Providing erecting and fixing double coated PVC. (ISI) 4000.00 Litr 3.94

water tank of required capacity each with all

necessary fittings and connection etc. complete on

57 'Providing & Supplying of High-quality virgin plastic 4.00 Nos 6565.00

build Table size LxBxH (1.50 x 0.75 x 0.75) As per

attached drawing & instructed by in charge

Consultant. 52-Inch Kids Half Moon Plastic Table is a

durable and spacious table designed with adjustable

height legs for children. Its unique half-moon shape

provides ample space for group activities, crafts, or

learning. Made from sturdy plastic, it is easy to clean

and maintain, making it ideal for classrooms,

playrooms, or home use. Table of Standard make (

Nilkamal, Cello etc. or equivalent ).

58 'Providing and Supplying of Fancy CHAIRS of pvc 8.00 Nos 939.30

base and armrest, as per selection and complete the

work satisfactorily as per instruction of architect or

Engineer-in charge Product Type Kids School

Chair,Back Type:Mid Back,Material:Plastic,Color:Red,

Yellow, Blue. Min Size14x17x12 inch Chair of

Standard make ( Nilkamal, Cello etc. or equivalent ).

59 Providing & Fixing Kitchen Storage Cabinetwith 5 self 15.00 Sqmt 2807.80

, 2 nos door 19 mm plywood with 4 mm glass panel

door,Storage self made with 12mm thick water proof

plywood of ISO 710, door sides border of 20 mm

thick in teak wood, All outer surfaces are to be

laminated with 1.5 mm laminate and internal

laminated with 0.80mm laminate sheet as approved

by architect. Including all necessary hardware &

fittings such as screw, buffer, bonding material etc.all

work must be done As per Architect Drawing &

Instructed By Site Engineer

60 Providing & Fixing 32-inch LED SMART TV is an ideal, 4.00 Nos 16665.00

compact entertainment unit for bedrooms, kitchens,

or small living spaces. Standard models feature HD

Ready resolution (1366 × 768), a 60Hz refresh rate,

16W to 20W speakers with Dolby Audio, and built-in

smart capabilities all work must be done As per

Architect Drawing & Instructed By Site Engineer

61 Providing & Fixing RO SYSYEM Capacity/Flow: 4.00 Nos 15150.00

Features a high 20 LPH purification speed with a 12-

litre storage tank, making it highly efficient for

continuous water requirements. Health

Enhancements: Multi-stage

RO+UV+Copper+Zinc+Alkaline pH B12 technology

that restores essential active minerals and balances

pH levels. all work must be done As per Architect

Drawing & Instructed By Site Engineer.

62 Point wiring for Light / Bell with 2-1.5 sq.mm & 36.00 Pt. 488.84

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of

pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type,

erected on PVC/ Metallic/ Wooden box, single

mounting base frame covered with textured/

metallic/ white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary

Lamp holder/ ceiling rose / H.D.Connector as

directed.(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling

complete Cat. III

63 Point wiring for FAN with 2-1.5 sq.mm & earth wire 16.00 Pt. 715.08

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/ Wooden box, single

mounting base frame covered with textured/

metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed. (c) with oval

conduit /PVC casing capping double lock type erected

flushed on wall/ceiling complete

64 Point wiring for on board Looped Plug with 6A 12.00 Pt. 309.06

Modular type switch & 5 pin socket erected on PVC /

Metallic/ Wooden box, single mounting base frame

covered with textured / metallic/ white front plate

modules erected on / in wall / ceiling with following

type accessories Cat. III

65 Providing following type of Modular Type Accessories 12.00 Nos 151.50

mounted with PVC / metallic/ Wooden box, single

mounting base frame covered with textured /

metallic/ white front plate, modules erected with

necessary connections as per site situation directed

by Engineer In charge.(1)One No. SP 6 Amp.Cat.III

66 Providing following type of Modular Type Accessories 12.00 Nos 151.50

mounted with PVC / metallic/ Wooden box, single

mounting base frame covered with textured /

metallic/ white front plate, modules erected with

necessary connections as per site situation directed

by Engineer In charge. (2) One No 5 pin plug.Cat.III

67 Providing following type of Modular Type Accessories 4.00 Nos 180.79

mounted with PVC / metallic/ Wooden box, single

mounting base frame covered with textured /

metallic/ white front plate, modules erected with

necessary connections as per site situation directed

by Engineer In charge. (9) 16 Amp. SP one way switch

68 Providing following type of Modular Type Accessories 4.00 Nos 199.98

mounted with PVC / metallic/ Wooden box, single

mounting base frame covered with textured /

metallic/ white front plate, modules erected with

necessary connections as per site situation directed

by Engineer In charge. (10) 6/16Amp. Universal

socket .Cat.III

69 Providing and erecting Mains with 1.1 kV grade FRLS 288.00 Mt. 104.03

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following

size (C) With oval conduit /PVC casing capping double

lock type (b) 2 wire 2.5 sq. mm

70 Providing and erecting Mains with 1.1 kV grade FRLS 96.00 Mt. 120.19

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (C) with oval conduit /PVC

casing capping double lock type (a) 2 wire 4 sq. mm

71 Providing and erecting Mains with 1.1 kV grade FRLS 80.00 Mt. 170.69

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (C) with oval conduit /PVC

casing capping double lock type (b) 2 wire 6 sq. mm

72 Providing & erecting Switch board for Computer or 4.00 Nos 1133.22

electric apparatus consisting of following modular

type accessories mounted with PVC/ Metallic

concealed/ open box with single mounting base

frame covered with textured/ metallic/ white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular

Type Accessories Cat. III

73 Supplying and erecting LED indoor fittings with LEDs 28.00 Nos 373.70

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/

CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/ watt, LED driver

efficiency > 85 % (fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat.III

74 Supplying and erecting led lamps with following 8.00 Nos 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection, Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable

LAMP holder (ii) 5 to 8 watts Cat-III

75 Providing and erecting Miniature circuit breaker 32.00 Nos 123.22

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-III

76 Providing & erecting 240 V MCB double pole switch 8.00 Nos 362.59

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity (B) 40 Amp. Cat-III

77 Sheets steel powder coated enclosure suitable for 4.00 Nos 176.75

incorporating One/Two nos. MCB.

78 Providing and erecting Sheet Steel powder coated 4.00 Nos 1492.78

MCB distribution board - flush /surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and

horizontal single phase outgoing (b) sheet steel

double door (IP-43) (iv)12 way

79 Providing and erecting Approved make RCCBs 4.00 Nos 2458.34

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with

all advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (ii) 40Amps. DP Cat. III

80 Providing and erecting Pipe type earthing having 150 4.00 Nos 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth

pit complete with necessary 8 SWG earth wire.

81 Providing and erecting Pipe type earthing having 150 4.00 Nos 171.70

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth

pit complete with necessary 8 SWG earth wire For

using salt and charcoal / coke as required for pipe

82 Providing and erecting Approved make Ceiling fan 16.00 Nos 1596.81

with double ball bearing ISI mark with condenser

A.C. 230V.50 Hz.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing.

[Make shall be approved by Engineer in charge]

83 Supplying and erecting 19 / 20 mm. nominal bore 16.00 Mt. 108.07

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

84 Supplying & erecting fan hook box of 10 mm M.S. 16.00 Nos 108.07

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be written in figures and

words) of the estimated rate mentioned above Amount of my / our tender works out as under.

*Estimated amount put to tender *Estimated amount put to tender

Deduct ……. % below Rs…………………… Add ………........% Above

*( please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of works directed by the

Engineer – In – Charge for which no extra payment shall bemade.

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.:

PRC-10/2017 Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where the reisa change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the

Executive Engineer

Signature of the contractor Panchayat (R & B) Division