Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹64.8 LAccepted-AOC 0 1 | ₹64.8 L | L1 | Accepted-AOC AOC Awarded been Lowest Quoted L1 |
| 2 | L2₹64.8 LRejected-AOC | ₹64.8 L | L2 | Rejected-AOC AOC Rejected been L2 |
| 3 | L2₹65.0 LRejected-Finance | ₹65.0 L | L2 | Rejected-Finance Reject Highest Quoted Rate |
| Sl No | Description | Qty | Unit | BHARAT BUILDING MATRIAL & CONSTRUCTION L3 | M/S SATISH CHANDRA JOSHI CONTRACTOR L1 | Rajendra singh jalal L2 |
|---|---|---|---|---|---|---|
| 1.00 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge . Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | 4.19 | CUM | 2,434.25 ₹10,199.51 | 2,434 ₹10,198.46 | 2,434 ₹10,198.46 |
| 2.00 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 87.68 | CUM | 260.3 ₹22,823.10 | 260 ₹22,796.80 | 260 ₹22,796.80 |
| 3.00 | Sand filling in plinth including supply of necessary quantity of Sand from a distance not exceeding 8km from the site of work & including Watering dressing etc. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work. | 38.95 | CUM | 2,123.75 ₹82,720.06 | 2,123 ₹82,690.85 | 2,123 ₹82,690.85 |
| 4.00 | C.C 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 17.4 | CUM | 6,812 ₹1.2 L | 6,812 ₹1.2 L | 6,812 ₹1.2 L |
| 5.00 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 | 16.2 | CUM | 700.5 ₹11,348.10 | 700 ₹11,340 | 700 ₹11,340 |
| 6.00 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | 32.96 | CUM | 7,132.25 ₹2.4 L | 7,132 ₹2.4 L | 7,132 ₹2.4 L |
| 7.00 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) | 25.94 | CUM | 9,105.95 ₹2.4 L | 9,105 ₹2.4 L | 9,105 ₹2.4 L |
| 8.00 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : 6.12.1 Cement mortar 1:4 (1 cement : 4 coarse sand | 87.7 | SQM | 837.35 ₹73,435.60 | 837 ₹73,404.90 | 837 ₹73,404.90 |
| 9.00 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone ballast in the proportion 1:1.5:3 in raft foundation and footing, RCC beams & slab lintel of the doors and windows, excluding supply of reinfocement & its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire & including necessary centring & shuttering etc. and also including s/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. | 54.56 | CUM | 11,505.5 ₹6.3 L | 11,500 ₹6.3 L | 11,505 ₹6.3 L |
| 10.00 | Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. | 7,652.57 | K.G | 107.85 ₹8.3 L | 107 ₹8.2 L | 107 ₹8.2 L |
Tender Value
₹65.1 L
EMD Value
₹1.3 L
Closing Date
13 Dec 2025, 2:00 pmClosed
Executive Officer
Nagar Palika Parishd kaladhungi
Construction work of municipal shops and library in ward no. 6
2025_NPKD1_89477_1
518
Open Tender
Civil Works - Buildings
120 days
ward n 6 kaldhungi
as per tender documents
3 documents required · 3 mandatory
₹4,720
EO, Nagar Palika Parishad Kaladhungi
₹1.3 L
30 Dec 2025
8 Dec 2025
15 Dec 2025
8 Dec 2025
13 Dec 2025
8 Dec 2025
Amount
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge . Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Sand filling in plinth including supply of necessary quantity of Sand from a distance not exceeding 8km from the site of work & including Watering dressing etc. Rate to include cost of all materials, labour and T & P etc. required for proper completion of the work.
C.C 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : 6.12.1 Cement mortar 1:4 (1 cement : 4 coarse sand
R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone ballast in the proportion 1:1.5:3 in raft foundation and footing, RCC beams & slab lintel of the doors and windows, excluding supply of reinfocement & its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire & including necessary centring & shuttering etc. and also including s/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.
Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured.
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
15 mm. thick plaster with cement mortar consisting of 1part cement and 6 part of approved coarse sand. Minimum thickness not to be less than 10 mm. including supply of all materials, labour and T & P etc. required for proper completion of work.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in all colours, shadesexcept White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying Two coats wherever required,to achieve even shade and colour.
Providing and fixingpanelling 35mm thk. flush doors, windows and clerestory windowsfactory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge
Providing Second class teak wood in frames of doors, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm.
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete. 125mm.
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete. 250x10 mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, 150x10 mm
Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufactur
Shuttering and centering for R.C.C. Structure all required work including all cost of T & P etc. complete work as per building specification and direction of E/I.
P/F fan clamps types of 12mm DIA M.S. bar bent to shape with hooked ends to r.c.c. slabs during laying includind the exposed proportions of hooks all as per standard design.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete With float glass panes of 5 mm thickness (weight notless than 12.50 kg/ sqm) as per the architectural drawings and the directions of engineer-in-charge .
Providing fixing thermal insulation of ceiling (under deck insulation)with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags,fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.
Supplying and fixing Rolling shutters of approved make, made of required size M.S. laths,interlocked together through their entire length and jointed together at the end by end locks,mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.
P/F fan clamps types of 12mm DIA M.S. bar bent to shape with hooked ends to r.c.c. slabs during laying includind the exposed proportions of hooks all as per standard design.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 455x610 mm and 45 cm deep for pipe line with one or two inlets :
Providing and fixing white vitreous china pedestal type (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
Providing and fixing white vitreous china wash basin size White Vitreous China Flat back wash basin size 630x450 mm with single 15 mm C.P. brass pillar tap, single 15mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good on walls floors wherever required.
Providing and fixing CPVC pipes 100 mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge..
Providing and fixing CPVC pipes 80 mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge..
Providing and fixing CPVC pipes 150 mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge..
Providing and fixing CPVC pipes 32mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge..
Providing and fixing CPVC pipes 20mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge
Providing and fixing gun metal gate valve 32mm dia with C.I. wheel of approved quality (screwed end)
Providing and fixing gun metal gate valve 20mm dia with C.I. wheel of approved quality (screwed end)
Providing and fixing PTMT towel rail 600 mm long with total length og 645 mm, width 78mm and effective height of 88 mm ,weighing not less than 190 gms .complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality
NAHANI TRAP
Providing and fixing C.P. brass angle valve 15mm dia. for basin mixer and geyser points of approved quality conforming to IS 8931 (DSR.-2019) 18.53.1.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 430x260x265 mm size respectively with automatic flushing cistern,with fittings, standard flush pipe and C.P. brass spreaders with brass unions and g.i. clamp complete including painting of fitting and brackets,cutting and making good the walls and floors wherever requird. One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
Wiring point for light/fan point/exast fan point with 1.5 sq.mm FRLS PVC insulated copper single core cable in surface /recessed steel conduit, with piano type switch fenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper single core cable etc. as required. Group A
Wiring for light/power plug with 4 sq. mm FRLS PVC insulated copper conductore single core core cable in surface /recessed steel conduit, alongwith 2Nos. 4sq. mm FRLS PVC insulated copper single core cable for loop earthing etc. as required.
Wiring for circuit/submain wiring alongwith earth wire with 3nos 2.5sq. mm size of FRLS PVC insulated copper conductore single core core cable in surface /recessed steel conduit, etc. as required.
Wiring for circuit/submain wiring alongwith earth wire with 3nos 4sq. mm size of FRLS PVC insulated copper conductore single core core cable in surface /recessed steel conduit, etc. as required.
Wiring for circuit/submain wiring alongwith earth wire with 3nos 6sq. mm size of FRLS PVC insulated copper conductore single core core cable in surface /recessed steel conduit, etc. as required.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, Supply, earthing etc. complete as BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC
Earthing with G.I. earth pipe 4.5 meter long,40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required.etc.
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connection etc. as required..
Supply and fixing of 4way (4+12) double door ways surface/recess mounting, vertical type, 415V TPN MCB distribution board of sheet steel, dust protected ,duly powder painted inclusive of 200 A. tinned copper bus bar common natural link, earth bar din bar for mounting MCBs as required.
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : 6.12.1 Cement mortar 1:4 (1 cement : 4 coarse sand
R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone ballast in the proportion 1:1.5:3 in raft foundation and footing, RCC beams & slab lintel of the doors and windows, excluding supply of reinfocement & its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire & including necessary centring & shuttering etc. and also including s/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.
Mild steel or iron in plain work such as in reinforced concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured.
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
15 mm. thick plaster with cement mortar consisting of 1part cement and 6 part of approved coarse sand. Minimum thickness not to be less than 10 mm. including supply of all materials, labour and T & P etc. required for proper completion of work.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in all colours, shadesexcept White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying Two coats wherever required,to achieve even shade and colour.
Providing and fixingpanelling 35mm thk. flush doors, windows and clerestory windowsfactory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge
Providing Second class teak wood in frames of doors, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm.
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete. 125mm.
Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete. 250x10 mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, 150x10 mm
Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufactur
Shuttering and centering for R.C.C. Structure all required work including all cost of T & P etc. complete work as per building specification and direction of E/I.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete With float glass panes of 5 mm thickness (weight notless than 12.50 kg/ sqm) as per the architectural drawings and the directions of engineer-in-charge .
Providing fixing thermal insulation of ceiling (under deck insulation)with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags,fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) boardconforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)
Mild steel or iron in plain work in heavy size such as trusses, built up gates record racks , roof works gates etc.wrought to requre from including drilling holes riveting or wending whewre necessary and their fixing required for proper completion of work.
Providing corrugated 1.00 mm thick with zinc coating not less than 275 gm/m² G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpewashers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
Providing and fixing white vitreous china pedestal type (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
Providing and fixing white vitreous china wash basin size White Vitreous China Flat back wash basin size 630x450 mm with single 15 mm C.P. brass pillar tap, single 15mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good on walls floors wherever required.
Providing and fixing CPVC pipes 100 mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge..
Providing and fixing CPVC pipes 32mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge..
Providing and fixing CPVC pipes 20mm. dia having thermal stability for hot &cold water supply including all CPVC plain & brass threaded fitting this includes jointing of pipes & fitting with one step CPVC solvent cement, trenching refilling, & testing of joints complete as per direction of in charge..
Providing and fixing gun metal gate valve 32mm dia with C.I. wheel of approved quality (screwed end)
Providing and fixing gun metal gate valve 20mm dia with C.I. wheel of approved quality (screwed end)
Providing and fixing PTMT towel rail 600 mm long with total length og 645 mm, width 78mm and effective height of 88 mm ,weighing not less than 190 gms .complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality
NAHANI TRAP
Providing and fixing C.P. brass angle valve 15mm dia. for basin mixer and geyser points of approved quality conforming to IS 8931 (DSR.-2019) 18.53.1.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore.
Wiring point for light/fan point/exast fan point with 1.5 sq.mm FRLS PVC insulated copper single core cable in surface /recessed steel conduit, with piano type switch fenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper single core cable etc. as required. Group A
Wiring for light/power plug with 4 sq. mm FRLS PVC insulated copper conductore single core core cable in surface /recessed steel conduit, alongwith 2Nos. 4sq. mm FRLS PVC insulated copper single core cable for loop earthing etc. as required.
Wiring for circuit/submain wiring alongwith earth wire with 3nos 2.5sq. mm size of FRLS PVC insulated copper conductore single core core cable in surface /recessed steel conduit, etc. as required.
Wiring for circuit/submain wiring alongwith earth wire with 3nos 4sq. mm size of FRLS PVC insulated copper conductore single core core cable in surface /recessed steel conduit, etc. as required.
Wiring for circuit/submain wiring alongwith earth wire with 3nos 6sq. mm size of FRLS PVC insulated copper conductore single core core cable in surface /recessed steel conduit, etc. as required.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, Supply, earthing etc. complete as BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connection etc. as required..
Supply and fixing of 4way (4+12) double door ways surface/recess mounting, vertical type, 415V TPN MCB distribution board of sheet steel, dust protected ,duly powder painted inclusive of 200 A. tinned copper bus bar common natural link, earth bar din bar for mounting MCBs as required.
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required.
R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone ballast in the proportion 1:1.5:3 in raft foundation and footing, RCC beams & slab lintel of the doors and windows, excluding supply of reinfocement & its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire & including necessary centring & shuttering etc. and also including s/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.
Mild steel or iron in plain work in heavy size such as trusses, built up gates record racks , roof works gates etc.wrought to requre from including drilling holes riveting or wending whewre necessary and their fixing required for proper completion of work.
Shuttering and centering for R.C.C. Structure all required work including all cost of T & P etc. complete work as per building specification and direction of E/I.
Rajendra singh jalal (BID ID -409162)
BHARAT BUILDING MATRIAL & CONSTRUCTION (BID ID -409168)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
Tenderdocument.pdf
Tender Documents • 0.47 MB
BOQ_106094.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid