SPL REPAIR/ CHANNELISING OF SEWAGE SYSTEM OF LENGTH 700 MTR AND RECONSTRUCTION OF BLOCKED 15 X SEWAGE PITS OF CERTAIN MIL UNIT, PROVN OF 44 X UPVC WINDOW IN BLDG NO P 08 (ADM BLOCK) OF CERTAIN MIL UNIT AND PROVN BOUNDRY WALL AND GATES FOR SECURITY O

Amount

Demolition & breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150mm complete all as specified

Demolition & breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 200mm complete all as specified

Demolition & breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 100mm complete all as specified

Demolition of cement concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified

Ditto all as per serial item No. 6.00 described here-in-before but beyond 1.5m or part thereof in depth beyond the first 1.50m

Returning filling in, including spreading, levelling watering & well ramming in layers n.exc 25cm thick in soil complete all as specified

Removing excavated material (soil) n.exc 1.5 KM & depositing complete all as specified

Demolition of Brickwork or stone/ boulder masonry/ precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified

Demolition of reinforced cement concrete of any description and in any position such as precast manhole cover or cover slabs of septic tank etc (reinforcement cut as required to facilitate demolition) complete all as specified

M&L for precast RCC (1:1.5:3) type B1 (using 20mm graded crushed stone aggregate) as in manhole covers set in cement mortar (1:4) including necessary formwork complete all as specified

S&F 200 mm dia (Internal) of salt glazed stone ware drain pipes, grade ‘A’ placed in position sewer pipe lines and jointed complete all as specified

S&F 150 mm dia (Internal) of salt glazed stone ware drain pipes, grade ‘A’ placed in position sewer pipe lines and jointed complete all as specified

S&F salt glazed stone ware drain pipes, grade ‘A’ placed in position in old sewer line, 100 mm dia (Internal) of sewer pipe lines and jointed complete all as specified

S&F PVC (SWR) 160mm bore pipe with working pressure 6 kg/cm2 single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as specified

S&F PVC (SWR) 150mm bore bend any radius fixed to PVC Pipes/Steel Gutters etc complete all as specified

Supply and fix PVC (SWR) pipes 110mm dia,type 'A' conforming to IS, single socketed, in any length with rubber ring joints laid in trenches or floor complete all as specified.

S&F PVC (SWR) 110mm bore bend any radius fixed to PVC Pipes/Steel Gutters etc complete all as specified

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M&L Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified

M&L for PCC (1:3:6) Type C1 (using 20mm graded crushed stone aggregate) as in coping/ benching for manholes complete all as specified

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested, dia of pipe 200mm complete all as specified

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested, dia of pipe 150mm complete all as specified

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested, dia of pipe 100mm complete all as specified

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in plinth protection path/hardstanding finished cement concrete surfaces fair and even complete all as specified

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) smooth finished, and reforming benching as required for 150mm internal dia of pipe complete all as specified

M&L for brickwork with burnt fly ash old size bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:4 by using old size bricks complete.

M&L for 15 mm thick plastering in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in surface channel and in bed of drain including forming channels complete all as specified

M&L for RCC (nominal mix) 1:1.5:3 type A-1 using 20 mm graded stone aggregate as in beam, cantilevers, bressummers, lintels over 1.5 m span and similar work complete all as specified Note - Reinforcement and form work shall be measured and paid separately.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified

M&L for preparation of newly wall plastered surfaces and applying three coats of white wash on wall complete all as specified

Cleaning of blocked manholes upto 60cm depth by removing of sludge from inside and removing to a distance exc 200m but not exc. 500m and burried the same in to earth pits including excavation of earth pits of required size & depth, depositing & spreading of sludge, returning in filling earth over sludge and removal of surplus soil to a distance not exc. 50m complete all as specified

Ditto all as per serial item No. 35.00 described here-in-before but exc 0.60 Metre and n exc.1.50 Metre in depth complete all as specified

Dismantling wrought iron or mild steel work of any description complete all as specified

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framedguard bars; barred iron doors/ gate, ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L for providing cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in coping set including weathering, slightly rounded or chamfered angles & thickness complete all as specified

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair complete all as specified

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified

M&L for applying two coats of weather proof exterior emulsion paint of standard quality and make, over a coat of white primer including preparation of new /old wall surfaces complete all as specified

Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for railing, lintels, concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified

S&F toughned glass, 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified

Taking down chowkats or frames (without taking off shutter from the frames) area exc 1.5 Sqm and n.exc 4 Sqm each and removal from site complete all as specified

Taking down chowkats or frames (without taking off shutter from the frames) area n. exc 1.5 Sqm each and removal from site complete all as specified.

M&L for rendering (10+5) mm thick in cement mortar (1:4) in two layers using WPC in finishing layer on brick or concrete surfaces finished even & fair complete all as specified (NOTE: WPC shall be measured and paid seperately).

Supply only liquid water proofing compound complete all as specified

M&L for two coats of Oil bound distemper on newely plastered wall surfaces including preperation of the surface complete all as specified

Material and Labour for preparation of new plastered surfaces and applying of two coats of cement base paint over a coat of alkali resistant priming paint of wall surfaces complete all as specified.

M&L for applying 1.0 mm thick (average thickness) wall care putty on new or old wall surface all as specified

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.Work to be executed in G+1 Building with in working office permises.

M/s. RAMPHAL GARG (BID ID -3382856)

AKASH PRASAD GUPTA (BID ID -3382760)