PROVISION OF OUT DOOR LIGHTNING AT HQ 33 WEU, NAVEL BASE KOCHI

Amount

Supply, installation, Testing and Commissioning of 7M GI Octagonal pole single section with bottom dia 135mm, top dia 70mm having sheet thickness 3mm fixed to the ground using studs & nuts RCC/PCC Foundation etc as per OEM recommendation. (The door height cut-out should not be more than 500mm with door elevation 500mm) The size of the reinforced rod should be 30x4mm. Size of the base plate should not be less than 220 Sqmm with thickness of base plate 16mm. PCD for the holes should be 225 mm with foundation of suitable size bolt, length of the foundation bolt 700mm with four foundation bolts with necessary washer and nuts. The Arm should be 1M length single arm with 15-degree Arm bracket incl three phase connecter. The total height of the pole should be adequate including PCC foundation, as per the direction of OEM J Bolt, nuts and washers as per the drawing of Manufacturer including necessary PVC flexible heavy duty pipe of suitable capacity for incoming/ outgoing cables complete all as specified and directed. Make:- Surya/ Bajaj/ Philips/ Crompton.

Supply, fixing, testing & commissioning of LED 70W Street Light with Diecast Aluminium body, Tough-ened glass with secondary lens with IP-66 Protection. The Surge Protection should be 10KV with more than 110 lm/W. Make Surya/ Bajaj/ Phillips all as specified and directed

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 core in trenches/ under floor/ on walls etc all as specified and directed

Cutting existing concrete/metal/ bituminous road/PCC hard standing / interlock tile or tile walk way any type n.exc 45 cm width and n.exc 30 cm in depth in hard strata and making good disturbed surfaces,as per the existing with cold mix bituminous material/ PCC(1:4:8) type D2 using 40mm graded stone aggregate 150 mm thick over returning filling, watering ,ramming in layers ,disposal of surplus material to a distance n.exc 50 m, complete all as specified and as directed by Engr in charge.

S & F 9W LED bollard luminaries in rectangular shaped victorian design with opal acrylic diffuser and IP 65 protection 9W LED WW 3000K along with wiring accessories including foundation with enamel white paint and of suitable size with enough space to accommodate the PVC Junction box all as specified as directed by Engg-in-Charge Cat Ref Bajaj make BGBOS 605 9W LED WW or equivalent in Surya/ Philips

S&F LED post top lantern fitting 40 Watt 3000 K antiquely designed aesthetically appealing landscape made from aluminium housing, clear polimer diffuser to provide uniform and pleasant light output with IP 65 protection complete with necessary GI pipe medium grade of suitable size including necessary PVC flexible heavy duty pipe of suitable size for incoming/ outgoing cables complete all as specified and directed including grounding of luminaries on existing pillers with studs, bolts, nuts connecting with 1.5 sqmm 3 core copper wire etc.etc all as specified and directed. Make Surya/ Havells/ Bajaj/ Crompton.

S & F in street light TIMER control panel, pole/wall mounting made out of CRCA sheet duly powder coated with locking arrangement, incl internal wiring complete with bypass arrangements including angle iron stand with foundation comprising of following :- (or as manufactures recommendation and design). (a) Incomer MCB TPN 63 Amps, 240/410V- 01 Nos . (b) Digital timer switch - 01 No (c) Contactor AC 3 rating, 3ph, of capacity 65 Amps - 01 No (d) ON/OFF indicating lamp - 01 Set (e) Auxilary change over switch 6 A - 01 No Make : Havells(IHXTSO9120) or equivalent in L&T /Indoasian.

Supply and Fixing PVC Junction box, with 4 x Aluminium busbar and one MCB SP 10 to 32 Amps for controlling street/ security lights water tight all as specified and directed. Make : Syntex/ Hensel/ IndoAsian

M&L for earthing complete with galvanized iron or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to galvanized iron strip 32x6 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth strip protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer nuetral/body/ Lt panel etc. and testing on completion, complete all as specified & directed by Engr-in-Charge.

M&L for PVC insulated copper conductor 3x single core(Red, Black , Green) 1.5 sqmm cable to be drawn inside the pole and connecting to the electrical system and light fittings all as specified and as directed.

M & L for Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand for laying of cable complete all as specified and directed.

M &L for Sand cushioning and covering of UG cable using riddle soil in trenches for cable protection all as specified and directed Note:- Punned depth only shall be measured and paid.

M & L for Returning filling including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed by Engr-In-Charge.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

M & L for Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat peak, size 250mm x 150mm x 40mm all as specifed and directed.

M&L for GI tubing medium grade (ISI marked) with all fitting/acessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc all as specified and directed of size 40mm dia.

PHEJAYS AGENCIES (BID ID -3146745)

M/s.Rejoy Constructions (BID ID -3141720)

AR Traders (BID ID -3152955)

JOSSEY RAPHEAL (BID ID -3152065)

Super Constructions (BID ID -3146578)