Renovation of office building at Market Yard, Ongole of A.M.C, Ongole in Prakasam District

Dismantling, Removing and stacking useful materials of Napa Flooring including labour charges etc, completed for finished item of work.

Dismantling, Removing and stacking useful materials of VCC Concrete including labour charges etc, completed for finished item of work.

Plain Cement concrete (1:5:10) using 40 mm metal with concrete mixer. All work upto plinth level: PCC (1:5:10) Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 40mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges, sales other taxes on all materials for finished item of work, but excluding Centering Scaffolding, Shuttering

Supply of soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all sahdes and designs, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 6 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Supplying and fixing GYP Board suspended regular single layer false ceiling (GS MFSC-4-1 Gyp board conforming to IS 2095-1982 fixing to Gyp steel GI perimeter channels of size 20mm x 27mm x 30mm (web) of 0.55mm thick along the perimeter of ceiling screw fixed to brick work / partition at 6.10mm c/c and suspending the frame work using intermediate channels (45mm x 15mm x 15mm x 0.9mm) from soffit at 1220mm c/c with ceiling angle (25mm x 10mm x 0.55mm) fixed with GI cleat and steel expansion fasteners and connecting clip to the ceiling channels (with knurled web of 51.5mm x 26mm x 10.5mm x 0.55mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5mm tapered edge Gypboard with 25mm drywall screws at 230mm c/c and jointing and finishing using flush look including filling the tapered and square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Ldia Gypsum Ltd specification

Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., Complete

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 904 for finished item of work

Supply of 1.5 TR, 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5. INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation with copper condenser.

Supply of 5.0 KVA 1-phase, automatic Electronic Voltage Stabilizer

Installation of Split Air Conditioners.

Supply, Fabrication of 1set MS bracket suitable for fixing outdoor unit Cassette AC unit.

Providing and fixing factory-made uPVC any colour sliding glazed windowupto 1.50 m in height dimensioncomprising of uPVC multi- chamberedframe with inbuilt roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).

Supply and Fixing of door with 35mm thick solid bond wood block board type with teak ply on both faces with shutter such as 'Z' hold fast, 6 No's hinges 150mm long, 2 Nos Aldrop 300mm long, 1 No's Tower Bolt 150mm long and fixtures to door with required number of screws, bolt and nuts includigng labour charges for fixing the shutter to the frame etc., complete for finished item of work.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

Supply and fixing of WPC Water Proof Door in Bath Room such as hold fast 2Nos hings 150mm long 1No. Aldrop 300mm long 1No. Tower bo;t 150mm long and fixtures to door with required number of screws, bolt and nuts includigng labour charges for fixing the shutter to the frame etc., complete

Painting to old walls with 2 coats of plastic emulsion paint of Over 1Coat of primer approved brand and shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work.

Painting to Old Iron work 2 coats with synthetic enamel paint of first grade approved brand and colour of ISI make over a primary coat including cost and conveyance of all materials including all labour charges for preparing the surface for painting all taxes etc., complete for finished item of work.

Filling with Carted Gravel in trenches, sides of foundations basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work.

Supply and fixing of Internal Aluminimum Partition with 12 mm thick both sides laminated MDF Board and 5 mm thick tinted glass Pannel Supported by Alluminium Extrassions of glazed clips and frame of size 63.50 x 38.10 x 1.21 mm thick. The Partition Shall be provided that the MDF Board pannel of size 0.88 x 0.11 and top Glass pannel of sze 0.90 x 0.88 and including cost and conveyance of all materials labour charges for manufacturing fixing in position etc., complete for finished item of work.

Supply, fabrication and fixing of alluminium door of size 0.90 x 2.10 mtrs by using anodised alluminium sections of size 47.62 x 44.45 x 1.18 mm thick for verticals, top & middle members and bottom member of size 95.00 x 44.45 x 1.20 mm thick and necessarry glazing clips and providing 12 mm thick both sides laminated MDF board at bottom and top fixing with 5mm thick pin headed glass and providing 3 no's of 125 mm long alluminium hinges, 150 mm long alluminium handles 2 no's, mortice Lock 1 no, and including cost of glazing clips, rubber beadings, fixers, screws, labour charges etc., complete for finished item of work.

VRCC M- 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (for 25mm thick Cup boards)

SF HYSD bars (Lap splicing) - Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different d iameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for rein forcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete

Supplying and Fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P'trap

Supplying & Fixing low down PVC flushing tank 10 Lit Capacitywith internal components

S&F 12.7 mm N.P bib tap Indian make heavy dutys Long body

S&F 12.7mm N.P bib tap Indian make 3heavy duty short body

Supply and fixing of Shower in bath room top cost and conveyance of all materials and all labour charges etc., complete

Supply and fixing of health fasucet 1mts length in bath room top cost and conveyance of all materials and all labour charges etc., complete

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal sizeC.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock

Supplying and Fixing Pedestal for Wash Hand Basin

Supply and fixing of towel rod cost and conveyance of all materials and all labour charges etc., complete

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995

Manufacture, Supply and Delivery of Unplasticised 110mm dia 4kg/Cm2 PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Supply and Fixing of Premium make 28.60mm ODPipe - SDR 13.5 CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007)

Supply and fixing of 12W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of >=100 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, Luminaire performance complies to IS 10322 (Part 5 / Sec-2) .etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.

Supply, Transportation and fixing of 20W, T8,1200mm length LED retrofit tube light, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete

Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : Crompton HS Plus / Havells ES PLUS/Orient Energy Star/ Halonix(Zephyr)/Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium)

Labour charges for fixing of ceiling fan and regulator including transportaion and giving connections with twin core wire etc., complete.

2 Module Modular type electronic step type Fan Regulator.

Wiring with 2 runs of 14/0.3mm (1.5 Sqmm) PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box inlcuindg all labour charges etc., complete for light point

Supply and run of 2 of 56/0.3 mm (4 Sqmm) FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete