Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹42.4 L+₹61,268.25 (1.47%)Rejected-Finance | L2 | Rejected-Finance Not being L1 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
5 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Naval Depot
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
DAY TO DAY MAINTENANCE WORKS AT INS DEGA AND DEGA VIHAR UNDER AGE BRII OF GEND VISAKHAPATNAM
2022_MES_521364_2
8977GEND
Open Tender
Civil Works
Item Rate
240 days
Visakhapatnam
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE ND VIZAG
₹96,000
17 Nov 2022
7 Jun 2022
11 Jul 2022
7 Jun 2022
5 Jul 2022
21 Jun 2022
Amount
The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:- [i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time. [ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE. [iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places. [iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). NOTE:- Tenderers/bidders are advised to vist the site and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later stage.
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.
Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed..
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.
S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed..
S&F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (any panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and directed..
M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window / ceosetory windows & other frames/ chowkhat of size 65 x125 mm comprising of virgin PVC polymer of K value 58-60 (suspension Grade ), calcium carbonate and natural fibre (wood powder/rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star hheaded SS screws having minimun density of 750 kg/cum and screw withdrawal streangth of 2200 N (Face) & 1100N (Edge ), minimum compresive strength 58 N/ mm2, modulus of elasticity 900 N/ mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs /SS dash fastener of required dia and length complete as per direction of Engineer in Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed.
S&F 30 mm thick flush shutter, solid core construction with block board case & plywood face panels commercial type on both side with particle board core with decorative face veneer with lapping/frame to match complete all as specified and directed.
S & F 30 mm thick Factory Made Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc complete all as specified and directed..
S/F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S/F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at sites complete all as specified and directed.
M & L for Factory made partly glazed i.e. upper panel wire mesh and lower panel wood grain printed PVC sheet shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.
M&L for factory made PVC ventilator made out of multi chamber PVC hallow section DWUF 405 (40x46mm) with 3mm pin headed glass fixed to the lower section using extruded PVC section of 9x19.5mm size OL19 with EPDM gasket (SPL 003) for both PVC sections. SINTEX make ventilator's centre mullion shall be made up of multi chamber hellow PVC section DWUF-406 (63.5mmX40mm) with EPDM gasket is used. GL-19 is fixed to the 3 sides of DWUF-405 and DWUF 406 (63.5X40mm) above he centre mullion. Glass panels with aluminium lower set is fixed to the frame DWUF-405 on the top of the ventilator for the glass. DWUF 405 and DWUF 406 comers shall be metre cut and welded, jointed with 12mm Ms rods (Guard bars) and necessary fixtures including necessary fixing arrangement and aluminium mosquito proof wire mesh of aperture 1.40 and dia of wire 0.36mm complete all as specified and directed..
S & F 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.
S & F powder coated aluminium frame for doors with one or more rebates including joining cleats for fixing with powder coating etccomplete all as specified and directed.
S & F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws with powder coating etc complete all as specified and directed.
S&F for powder coated Aluminium sliding window (two track) and ventilator frame made up of 62 mm x 29.5 mm ,1.5 mm thick aluminium section & shutter made up 38 mm x 20 mm,1.5 mm thick aluminium section without sash bar, including 5 mm thick plain sheet glass and all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised aluminium fittings,suitable aluminium handle and locking arrangment etc including taking down old window complete all as specified and directed.
S & F in repairs 12mm thick Prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed.
Aluminum frame work for grill, deco grill model DG-104 with 10 mm thick flat matt design making scope and level and fixed in 30 x 12 x 5 mm channel complete and necessary fixing arrangements etc complete all as specified and as directed.
S&F 100 mm size hasp and staple safety type aluminum anodized with mild steel hinge ping including bolt to hinge plate and fixed with crew complete all as specified and directed.
S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.
S&F 75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.
S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F in repair 30mm continuous(piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
S&F Mild steel Angles, bars, flats etc as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed.
M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded crushed granite stone aggregate) as in hold fast blocks complete all as specified and directed. .
Supply and fixed stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapple complete all as specified and directed.
Supply and fixed in repairs stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapple complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F in repairs, 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass (any thickness,size,or description) from wooden/steel frames complete all as specified and as directed.
S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in repairs Door closer Cast iron body hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.
M&L preparation of new wooden surfaces over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.
Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.
S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders, framed balusters, walk ways, railings, framework of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed
M&L Prepration of new steel Surfaces of any description, not otherwise described, over 10cm width or girth and Painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 including demolition of old brick work complete all as specified and directed
M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including dismantling of old brick work complete all as specified and directed
Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials where directed at low lying areas in defence land complete all as specified and directed
M&L for granite tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including demolition of old stone slab tiles of any type and description complete all as specified and directed.
M&L for rendering 20 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including water proofing compound @ 3% by the weight of cement as per manufacturers instructions and finished fair and even without using extra cement complete all as specified and directed
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint white or tinted complete all as specified and as directed.
M&L for Preparation of Newly plastered surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying cement based putty of adequate thickness on wall surfaces to achieve even and smooth surface and applying two coats of oil bound distemper on walls complete all as specified and directed.
M&L for Preparation of new plastered ceiling surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.
M&L for preparing old painted surfaces by washing rubbing down and stopping of painted surfaces and applying one coat of weather proof acrylic emulsion paint(100 % Acrylic) ,exterior grade on surfaces of walls complete all as specified and directed.
M&L for Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls complete all as specified and directed.
M&L for Preparation of old plastered or unplastered wall surfaces and applying one coat of cement base paint on wall complete all as specified and as directed
Complete removal of existing treatment and preparation of old or previously untreated surfaces of cement or plastered surfaces, of any description and girth, not otherwise described and applying 3mm thick wall care putty and a coat of primer on wall surface to achieve even and smooth surface and applying two coats of oil bound distemper on walls complete all as specified and directed.
M&L Non-skid glazed ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 including dismantling of old tiles complete all as specified and as directed.
M&L for Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match and laid over 20 mm thk cement screed bed in cm 1:4 including dismantling of old tiles complete all as specified and directed
M&Lfor glazed ceramic coloured tiles size 450X350X7 mm thick on vertical surface such as skirting, dadoetc. set and jointed in neat cement slurry and pointed in coloured cement to match with shade of tile over and including 10mm thick rendering in CM (1:4) on vertical surfaces as backing coat including dismantling of old tiles complete all as specified and directed.
S & F in repairs vitreous China squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including cement concrete bedding and making good the disturbed portion to match with the existing finishes of floor complete all as specified and directed
S&F in repairs Vitreous China wash down water closet pan 580 x 440 mm (Pedestal pattern) white incl seat and cover, flush pipe including all joints complete all as specified and directed
S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern, low level with inlet,bend , ball valve, float etc all as specified including necessary flush pipe complete all as specified and directed
S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.
S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed
S/F in repairs 15 mm dia PVC connection with PTMT nuts ,450mm long complete all as specified and directed
S&F in repair sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed
S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S & F in repairs 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F, in repairs, 15mm bore stop cock cast copper alloy screwed down high pressure with capstan head handle chromium plated screwed both ends for iron pipe or for union & fixed complete all as specified and directed.
S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed
S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F in repair 125 mm to 150 mm bore mild steel chromium plated grating fixed on floor trap/Nahni trap in CM 1:6 complete all as specified and directed
S&F in rotational moulded polyethylene water storage tanks triple layered (ISI Marked) 1000 ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tank and removing from site complete all as specified and directed
S&F rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) Triple layered ISI Marked, including dismantling of old tank and removing from site complete all as specified and directed.
S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 210 gms) complete all as specified and directed
S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 210 gms) complete all as specified and directed
Supply and laying of 16 mm outer dia CPVC pipes SDR 11 & brass fittings in trenches, floors, walls etc including taking down of old pipe complete all as specified and directed
Supply and laying of 20 mm outer dia CPVC pipes SDR 11 & brass fittings in trenches, floors, walls etc including taking down of old pipe complete all as specified and directed
Supply and laying of 25 mm outer dia CPVC pipes SDR 11 & brass fittings in trenches, floors, walls etc including taking down of old pipe complete all as specified and directed
S&F 150 mm dia PVC (SWR) pipes single socketed in any length ,with rubber ring joints fixed in walls complete all as specified and directed.
S&F 110 mm dia PVC (SWR) pipes single socketed in any length ,with rubber ring joints fixed in walls complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length ,with rubber ring joints fixed in walls complete all as specified and directed.
S&F 110 mm dia bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75 mm dia bore PVC (SWR) bends any radius complete all as specified and directed .
S&F 110 mm PVC (SWR) junction single(Single T) equal or unequal with access door complete all as specified and directed.
S&F 75 mm PVC (SWR) junction single(Single T) equal or unequal with access door complete all as specified and directed .
M & L for Anodised aluminium partitions (Area of panel not exc 1.5 Sqm each) with frame made of aluminium section of 63.5x38.1x1.5mm size fixed with and including including necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws including providing 12mm thick prelaminated particle board, exterior grade prelaminated both sides with decorative choice lamination fixed to alumnium frame including dismantling old partitions complete all as directed.
M& L for anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling with hangers 4 mm dia GI (upto 1200mm length) adjustable level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40 mm long including dismantling old complete all as specified and directed.
S&F PVC insulation panels with EPS stuck to 5 mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification but without relevant PVC insulation panel including dismantling old complete all as specified and directed.
S&F of rolled mild steel joist, channel, angle, post, fixed independently without connecting plates etc. (cut to ordinary length i.e. within 20 mm of length) confirming to Fe-290 Grade-E 165 including dismantling of old steel complete all as specified and directed
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated / plain steel sheet of 0.50mm thick, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with and including self tapping screws complete all as specified and directed.
M & L for 75 mm thick, PCC 1:2:4, type B-2, using 40mm graded crushed stone aggregate as in sub base of flooring/hardstanding including demolition of old concrete complete all as specified and directed.
M & L for coloured chequered cement concrete tiles of size 25cm x 25cm x 22 to 25mm thick set jointed and pointed with grey cement with pigment in neat cement slurry as in floors and pointed with white cement laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. [The design, colour and pattern of tiles shall be as approved by the GE]
Taking down existing tarfelt including tiles, lime concrete & screede bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specifed and as directed.
M&L for 15mm thick rendering in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying water proofing treatment, with and including water proofing compound @ 3% by the weight of cement as per manufacturer's instructions finished even and smooth without using extra cement complete all as specifed and as directed.
M & L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating brushbond Roof Guard or wquivalent product of makes given below as approved by GE in 3 coats of application @ 0.5 litre/sqm coat, including sprinkling of clean sand (300 microns - particle size). The product should have following properties soild content : 70% tensite strength (ASTM D412): 1.10 MPs, elongation (ASTM D12): 100% Resistance to ageing due to UV radiation . 1000 hours no change rapid chloride penetration :very low resistance to algae growth passes, zero rating / permeability (mm):5.0 water vapourtransmission :6.0gm/sqm h No of coats :3 (minimum) adhesive bond strength: >0.92 N/mm2 complete all as per manufacturer's instructions. Makes:- M/s Sika India Ltd / M/s Fosroc Chemicals / M/s STP Limited / M/s Choksey Chemicals / M/s Thermax Ltd / M/s Hindcon Chemicals Ltd / M/s Maruti Bitumen Pvt Ltd / M/s Bostik India Pvt Ltd
M& L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
RL ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .