Repair work of fire fighting and fire alarm system installed in District Court Mau.

Fire Fighting System Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. a ) 100 mm Dia DSR 18.7.7

80 mm Dia DSR 18.7.6

50 mm Dia DSR 18.7.4

25 mm Dia DSR 18.7.1

Providing, installation, testing and commission of butterfly valve of following sizes PN-16 slim seal standard level operated type as per design standerd IS: 1395 or BS:5155 with companion flanges, bolts, nuts, washers etc. complete in all respects. 100 mm dia DSR 18.11.5

80 mm dia DSR 18.11.4

Providing, installation, testing and commission of non-return valve of following sizes PN-10 as per design standerd IS: 5312 or BS:1868 with companion flanges, bolts, nuts, washers etc. complete in all respects. 80 mm dia DSR 18.14.4

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked completewith nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 80 mm dia DSR 18.12.4

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia s DSR 18.17.1

SITC of Hose Box of 18 SWG MS Sheet with glass fronted door to accommodate 2 nos. RRL hose & 1 no. SS Branch Pipe with nozzle (External/ Internal) Size 800x600x400 --QR

Repairing of 10 Nos Hose Box of 18 SWG MS Sheet with glass fronted door to accommodate 2 nos. RRL hose & 1 no. SS Branch Pipe with nozzle (External/ Internal) --QR

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63mm dia male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel DSR 18.16.2

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304) DSR 18.18.2

Repairing of Electrical Operated Main Fire Pump Consisting of 1. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 for 2280 LPM at 70 Mtr head. 2. Suitable HP TEFC type Squirrel cage induction motor of minimum 60 HP. suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. -QR

Repairing of Diesel Engine Driven Pump Consisting of 1. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 for 2280 LPM at 70 Mtr head. 2. Suitable HP, 1500 RPM, minimum 60 HP, Water Cooled, Auto start mechanism Diesel Engine with flexible coupling, Exhaust pipe insulatedwith 50 mm Glass wool with 1.0 mm thick Aluminium sheet cladding, with silencer etc.Confirming pollution Norms. -QR

Repairing and Servicing of Electrical Driven Jockey Pump Consisting of 1. Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 for 180 LPM at 70 Mtr head. 2. Suitable HP TEFC type Squirrel cage induction motor of minimum 10 HP. suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. -QR

Repairing of factory Fabricated wired metalclad dust & vermin proof floor mounting main electric control panel for main electrical fire pump, diesel engine pump 1no. Jockey pump with starter switch volt meter amp. meter & battery charger with battery. HRC type 315 amp./415 volt. Main switch Engine control relay 75HP star delta starter with timer, Single phase protector LED indicator lamn etc TS No-03 SE-44 (E/M) /2024-25 Dt 14.06.24

Supplying Laying testing & Commissioning of 2 core X 1.5 sq.mm single standard copper conductor, PVC insulated armored cable.DSR 17.5.2

Supplying Laying fixing & Commissioning one no 16 sqmm of 4 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV garede of following size on wall surface as required including lugs and glands SOR 20.1/7.7/20.1.9

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler DSR 18.21.1

Supplying and fixing single headed hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel DSR 18.9.2

ALARM SYSTEM. Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required. DSR 17.3.9

Supplying, installation, testing & commissioning of addresseble manual call point complete as required. DSR 17.2.14

Cleaning of Photoelectric type smoke detector as per Fire specification including making connections with wire. Make- system sensor, Apollo, Agni. . -QR

Refilling of ABC type fire extinguisher 4 kg ISI Marked . -QR

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. DSR 17.1.2

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. DSR 17.1.6

Supplying, installation, testing & commissioning of addreseble horn cum strobe complete with base as required.DSR 17.2.15

Supplying, installation, testing & commissioning of heat detector operating at 542C/572C with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. DSR 17.1.1

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. DSR 17.1.3

Painting work of MS fire Pipe by applying one coat of Anti Corrosive Primer and two coat of PO Red Paint after cleaning the surface included all cost of material. Skilled labour and T&P, C.P. Complete. All Insttaled MS pipe QR

Supply & fixing of CO2 type fire extinguisher, 4.5 kg. capacity (ISI Marked IS:2878 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. Warranty of 3 years make Agro safe ,Ceasefire ,Life guard etc/ Equivalent . TS No-104 C.E. (E/M)-44 /2024-25 Dt 17.10.24

Supply & fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS:15683 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.Warranty of 3 years make Agro safe ,Ceasefire ,Life guard etc/ Equivalent . TS No-104 C.E. (E/M)-44 /2024-25 Dt 17.10.24