CERTAIN REPAIR TO FLOORING AND WALL TILING AND MISC B/R WORKS TO CERTAIN PLACES AT 217 TRANSIT CAMP, PALCHAN

Amount

Dismantling PVC sheet/wooven/wooden flooring including cleaning the surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and fix for wooden coloured interlocking tiles 1215x168x8mm thick rectangular in floor /dado laid in over edsiting floor with foam sheet of approved best quality incld joints /end covering strip of make Kajaria Actioncomplete complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparaton of new wooden surfaces including grinding with drum sanding machine ,filling surface with a coat of wood filler and applying two or more coats of French polish complete all as specified and directed by Engineer-in-Charge.

Material and Labour for synthetic wooven flooring carpet weight 1.5kg/sqm fixed with approved rubber base adhesive as in floors complete all as specified and directed by Engineer-in-Charge. Make :BAJAJ/Unitex Carpet/Responsive Industries Ltd.

All as per ser Item No 4 but on skirting complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and directed by Engineer-in-Charge.

Demolition of PCC in ground floors and pavings n exc 15cm thickness including below or above ground level complete all as specified and directed by Engineer-in-Charge.

Material and Labour 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in subbase of floor complete all as specified and directed by Engineer-in-Charge.

Material and Labour for pre- polished granite slab of any tint as approved by the GE 18 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and directed by Engineer-in-Charge.

Material and Labour for15mm thick rendering in CM 1:4 on stone masonry surfaces for laying of tiles complete all as specified and directed by Engineer-in-Charge.

Material and Labour for glazed coloured ceramic tiles of size 300X450X7 mm thick on vertical surfaces such as skirting dados, risers etc set and jointed in neat cement slurry and pointed in white/coloured cement to match with colour of tiles complete all as specified and directed by Engineer-In- Charge.

Material and Labour Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engineer-in-Charge.

Material and Labour chequered cement concrete tiles 20cmx 20cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer-in-Charge.

Material and Labour machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 20mm thick screed and bed or bedding layer of cement mortar 1:4, complete all as specified and directed by Engineer-in-Charge.

Material and Labour for vitrified tiles light coloured 10mm thick, polished, area of each tiles not exc 0.36 sqm, in floor, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Pre-cast cement concrete block 1:3:6 type C1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6,incld demolitions complete all as specified and directed by Engineer-in-Charge.

Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar. complete all as specified and directed by Engineer-in-Charge.

Material and Labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and Labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and Labour for preparation of newly plastered surface of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge. (Make of distemper : Asian or equivalent)

Material and Labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primercomplete all as specified and directed by Engineer-in-Charge. (Make Acrocem/Snowcem and equivalent)

Taking down frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm and n. exc 4 Sqm each complete all as specified and directed by Engineer-in-Charge.

Supply and fix anodised aluminium frame for doors, windows/ventilators and patition with one or more rebates including joining cleat for fixing etc., incl all fittingscomplete all as specified and directed by Engineer-in-Charge.

Supply and fix anodised aluminium door shutters, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, sliding wheels, anodised aluminium snap beading screws, powder coated of any colour (Thickness or powder coating not less than 50 micron). complete all as specified and directed by Engineer-in-Charge.

S & F 12 mm thick prelaminated particleboard, exterior grade, prelaminated on both sides with decorative choice lamination , complete all as specified and directed by Engineer-in-Charge.

Supply and fix 4.80 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fix 4.80 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel 4 levers mortice lock, 100mm long ertical type , complete all as specified and directed by Engineer-in-Charge.

Supply and fix for Door closer aluminium (die cast body), hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply and fix 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

NATHU RAM AND SONS