WBTET/DTET/BDP/NIT-2/Equip/23 WBTET WBTET/DTET/BDP/NIT-2/Equip/23

Kit for Measurement of 3 Phase Reactive Power with single watt meter

Kit for two watt-meters for measuring active power of three-phase balanced load.

Kit for Wheatstone bridge for measurement of medium resistance.

Earth Tester

Kit for Measurement of unknown capacitance using Schering bridge.

Kit for Measurement of unknown inductance using Anderson bridge

Tri-vector meter for measuring kW, kVAr and kVA of a power line.

Digital Storage Oscilloscope( DSO) With probe

Solar Cell Characteristics Apparatus

Cut section model of water turbine

Kit for Measuring Solar Radiation using Pyranometer & Plotting of radiation Vs Time Characteristics

Panel for Measurement of Voltage, Current, Power & Power Factor in Single Phase Circuit

Digital LCR Q Meter, For Laboratory

Digital P N Junction Semi Conductor Diode Characteristics Apparatus

Analog Op - Amp As Differentiator & Integrator Trainer, For Laboratory, Model

Kit for Analog Basic Logic Gates Using TTL IC, For Laboratory

Hand driven analog Insulation Tester should have warranty of 1 year

Zener Diode Characteristics Curve Plot

Observation the output voltage using Ics

Realization of Half Adder, Half Subtractor.

Realization of Full Adder Full Subtracton

Verification of the function of SR, D, JK and T Flip-flops.

Binary Asynchronous or Synchronous counter.

Full-wave rectifier circuit with filters and without filters.

Operation of a stepper motor Using 8051

Traffic light Control using 8051

Measurement of ac voltage, current, frequency and phase angle

MCCB, ELCB, RCCB

KIT for percentage Differential Protection of Transformer Using Transformer Differential Relay

static distance protection relay using Relay Testing Kit.

KIT for operation of single phase preventer by creating single phasing fault

Test the proper functioning of power electronic switches – SCR, IGBT, SCS and TRIAC

Test the proper functioning of DIAC to determine the break over voltage.

Kit to determine the latching current and holding current using V-I characteristics of SCR

Kit to test the variation of R in R triggering circuit, variation of C in RC triggering circuit, variation of R, C in UJT triggering circuits on firing angle of SCR.

Determine the firing angle using DIAC and TRIAC phase-controlled circuit on output power under different loads such as lamp, motor or heater.

Perform speed control of DC separately excited motor using SCR.

Dynamic braking of three phase squirrel cage induction motor using contactor control.

Set up to control the speed of three phase squirrel cage induction motor using stator voltage control method.

Set up to study the effect on speed of given D.C. series motor by varying armature voltage using step down chopper.

Demostrate high power SCR and Heat sink

Set up to Make & test the control and power circuit for forward and reverse rotation of sq. cage induction motor using contactor circuit.

Set up to Make & test the control and power circuit for automatic star-delta starter operation of sq. cage induction motor using contactor control.

Study samples of Overhead Conductors, Underground Cables and Line supports

Demonstrate various system faults by D.C. network analyzer.

Demonstrate the improvement of p.f. using static condenser

Kit for compare power consumption of different types of TL with electromagnetic ballast, electronic ballast and LED lamps by direct measurements and estimate energy saving.

Experiment to determine the reduction in power consumption in star mode operation of Induction motor compared to delta mode at different load conditions.

Experiment to estimate energy saving by improving power factor using estimate energy saving by improving power factor using PFC/APFC for an electrical load.

Determination of reduction in power consumption by replacement of Fans and regulators.

Control circuit of twin fluorescent lamp

Control circuit of LED lamp.

Light dimmer arrangement using the relevant dimmer type of transformer

Illumination output of different lamps (Incandescent, fluorescent, CFL, LED, HPSV, MH) and calculate their luminous efficacy.

Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in givenR-L, R-C and R-L-C series circuit. Draw phasor diagram.

Variable frequency supply to create resonance in given series and parallel R-L-C circuit or by using variable inductor or variable capacitor

Voltmeter, ammeter, wattmeter to determine current, p.f. , active, reactive and apparent power in R-L / R-C parallel A.C. circuit

Voltmeter, ammeter, wattmeter, p.f meter to determine line and phase quantities of voltage and current for balanced three phase star and delta connected load and calculate active, reactive, and apparent power. Draw phasor diagram.

Starting and reversing of DC motor.

Control the speed of DC shunt motor above & below rated speed & draw the speed characteristics.

Determine equivalent circuit parameters of single-phase transformer by performing O.C. test and S.C. test.

Determine the regulation & efficiency of single-phase transformer by direct loading method.

Compute the efficiency of a single-phase transformer by Back-to-Back test.

Perform parallel operation of two single phase transformers to determine the sharing of load current, apparent and real power

Perform the direct load test on the three phase squirrel cage induction motor and plot the i) efficiency versus output, ii) power factor versus output, iii) power factor versus motor current and iv) torque – slip/speed characteristics efficiency versus output, v) power factor versus output, vi) power factor versus motor current and vii ) torque – slip/speed characteristics

Conduct the No-load and Blocked-rotor tests on given 3-phase squirrel cage induction motor and determine the equivalent circuit parameters

Perform the direct loading test on the given three phase alternator and determine the regulation and efficiency

Determine the regulation and efficiency of the given three phase alternator from OC and SC tests (Synchronous impedance method)

Control the speed and reverse the direction of the AC servo motor.

Control the speed and reverse the direction of the DC servo motor

Measure impedance voltage and load losses of three-phase transformer.

Determine efficiency of D.C. machine by Hopkinson’stest

Determine breakdown strength of transformer oil

Conduct the direct load test to determine the efficiency and speed regulation for different loads on the given single phase induction motor; plot the efficiency and speed regulation curves with respect to the output power.

Measure No load power, losses, current of a single phase transformer upto 110% of rated voltage

Pedestal Fan (High Speed)

CNC Turning Centre T-100

CNC Machining Centre Vertical Milling

Coefficient of friction tester for variable angle with weight

Slip Gauge Set M 88 Block

Sine Bar Set

Analog Vernier Caliper (Mitutoyo)

Universal Testing Machine(Computerized, 600KN)

Rockwell & Brinell Combined Hardness Testing Machine

Charpy & Izod Impact Testing Machine (Mechanical type),

Magnetic Particle Testing Equipment(MPI)

Dye Penetration Testing Kit set

Pneumatic Circuit Trainer Kit

Actual cut section model of oil pump (Internal Gear)

Actual cut section model of oil pump (External Gear type)

Actual cut section model of Vaccum pump (Vane type)

Pressure relief valve

Non return valve

Actual Cut section model of Two stoke IC engine(C.I)

Cut Section Model of Shell & Tube type, Plate type heat exchanger

Cut Section Model of Rotary Air Compressor

Thermal Conductivity apparatus

Bourden Tube Pressure gauge

Cut section model of Cochran boiler for demostration

Cut section model of Babcok & Wilcox boiler for demostration

Electric bench Grinding Machine

End Milling Cutter 10mm

Face milling Cutter with Tool holder

Side milling Cutter

T Slot Milling Cutter

Drill Vice

Counter Sinking Drill bit

Double fluted twist drill bit

Argon Gas Cylinder with Regulator for TIG Welding

Pedestal Fan (High Speed)

Ohm's law Apparatus

P.O. Box

Kirchhoff's Law Apparatus

PN Junction Diode Characteristics Apparatus

Conversion of Galvanometer into a Voltmeter & Ammeter Apparatus

Screw Gauge

Vernier Callipers

Friction Board Apparatus

Spring Constant Apparatus

Apparatus to determine and verify the time period of oscillation of a cantilever

Moment of Inertia of Flywheel Apparatus

Resistance Box

Apparatus to verify inverse square law of radiations using a photo-electric cell

Apparatus to study the dependence of capacitance of a parallel plate capacitor on various factors and determinethe permittivity of air at a place

Apparatus to determine the soefficient of linear expansion of a rod ( Pullinger's Apparatus)

Castor Oil (in Liters)

Litmus Paper Red & Blue

Conductivity Meter with Electrode

Red-Wood Viscometer

Daniel Cell

Abel's Apparatus for flash & fire point of oils determination

pH Meter

Carrom Board

Table Tennis Board

Badminton Net

Cricket Bat

Badminton Racket

Badminton Shuttle

Tennis Ball

Volley Ball

Volley Ball Net

Football

Wicket

Yoga Mat

Chess Board

BDPEE08

BDPEE11

BDPEE25

BDPEE27

BDPEE30

BDPEE31

BDPEE36

BDPEE38

BDPEE40

BDPEE42

BDPEE51

BDPEE52

BDPEE53

BDPEE55

BDPEE57

BDPEE61

BDPEE62

BDPEE63

BDPEE65

BDPEE66

BDPEE69

BDPEE70

BDPEE71

BDPEE74

BDPEE75

DELTA TECHNOLOGIES

BDPEE29

BDPEE47

BDPEE72

SUSHAMA ELECTRONICS

BDPEE02

BDPEE04

BDPEE05

BDPEE06

BDPEE08

BDPEE09

BDPEE10

BDPEE12

BDPEE13

BDPEE14

BDPEE15

BDPEE16

BDPEE17

BDPEE18

BDPEE19

BDPEE20

BDPEE21

BDPEE22

BDPEE23

BDPEE24

BDPEE26

BDPEE33

BDPEE34

BDPEE35

BDPEE39

BDPEE43

BDPEE46

BDPEE48

BDPEE49

BDPEE50

BDPEE56

BDPEE58

BDPEE59

BDPEE60

BDPEE64

BDPEE67

BDPEE68

BDPEE73

BDPPHY03

BDPPHY04

BDPPHY05