Repair to Tehsil Welfare office building in Tehsil Baijnath Distt Kangra H.P

Amount

Excavation in earth work jumper work and disposal of all excavated earth up to a lead of 20 metres (twenty) metres and lift up to 1.50 m (one point fifty) metres disposed earth to be levelled and neatly dressed. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work grade M-20 design mix to obtain the minimum compreasive strength of M-20 N/mm2 with cement contents not less than of 330kg/m3 (three hundred thirty kilogramme per cubic metre) excluding cost of form work and reinforcement for reinforced concrete work in foundation footing, basis of columns and the like mass concrete upto floor all level and curing complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Stone filling dry hand packed behind retaining walls or under floor including curring and carriage of material within all leads, lifts and other incidental charges complete in all respect. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing pre-painted sheet roofing of kotar metal single skin trapezoidal sheeting 0.60mm (sixty milimetre) thickness having 1060mm (one thousand sixty millimetre) cover width cover all width 1126mm (one thousand one hundred twenty six milimetre) , 28mm (twenty eight milimetre) crest depth at 353mm (three hundred fifty three millimetre) 2.50mm (two point fifty millimetre) the main crest with at top 25mm (twenty five) and at lower 81mm (eighty one milimetre) base metal of coil rolled steel coil with zinc waiting top coat with regular modified polysters coating of approved shade and balancing reverse coat with self topping screws 5.5mm (five decimal five millimetre) dia and 55mm (fifty five millimetre) length with EPDM seal complete in all respect as per approved drawing design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing plaing M.S. B.P. sheet 1.66mm (one decimal sixty six millimetre) thick to 2.00mm in evels board/ Facia / Sofit / Ceilling including cutting fixing jointing with gass/electric welding to steel roofs members and applying a coat of red lead primer complete as per PWD specification (frame work is to be measured paid for separately). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position in beams joists channels ,angles ,tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like work including cutting hoisting fixing in position & applying a priming coat of red lead paint complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Painting two or more coats(excluding priming costs) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of nerolac susksho undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per PWD specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls. Priming coat with distemper primer. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and laying white glazed tiles 6 mm (Six millimetrte) thick in skirting, riser, steps and dedo 200x150 mm (Two hundred into one hundred fifty millimetre) size laid on bed of 12 mm (Twelve millimetre) thick cement mortor 1:3 (one cement : three sand ) finished with flush pointing in white cement complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Dismantling tiles floors laid in mortar up to floor two level in skerting of serviceable material for thick uses of tile above 25mm (twenty five) millimeter and up to 40mm (forty) millimeter. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Dismantling doors, windows and clerestory windows, ventilators etc Exceeding 3 (Three) sqm in area (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Fixing clerestory window chowkhats including cutting masonry for embedding hold fasts in Cement mortar 1:4 (One Cement : four Sand) and making good the damage to walls complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing woodwork in 2nd class deodar wood frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 40 mm (Forty millimetre) thick panelled glazed or panelled and glazed shutter second class Deodar wood for doors, windows and clear story windows including bright finished black enamelled iron hings with necessary screws as per PWD specification.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85G with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clearstory windows including bright finished black enamelled iron hings with necessary screws as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 12mm (Twelve millimetre) Thick Prelaminated board in matt finished ISI marked NO 12823 as per approved shade of viromica / kit ply / nona pan / green ply both side BWP phenol bonded exterior / interior grade panelled shutter with frame of first class Deodar wood including bright finished black enameled butt hinges with necessary screws 40 mm (Forty millimetre) thick shutter as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 250x16mm (two hundred fifty by sixteen milimeter ) Size anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 250x10mm (Two hundred fifty into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 150x10mm (One hundred fifty into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete.125mm (one hundred twenty five milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete.100mm (one hundred milimeter) nominal size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 200mm (two hundred) millimeter bright finished hard drawn hooks and eyes as per the direction. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 150mm (One Hundred fifty milimeter) oxidized MS (mild steel)single acting spring hinges bright finished with necessary screws etcetera as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and laying spartic ceremic tiles 5.5mm (five point five milimeter) thick in flooring (300 x300mm. size) (three hundred into three hundred milimeter ) treads of steps laid on a bed of 12mm (twleve milimeter) thick cement mortar 1:3 (one cement: three sand) finished with flush pointing in white cement.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) (three hundred into three hundred into ten) millimeter in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (twelve) millimeter thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 10mm (ten milimeter ) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (Six hundred by six hundred by ten milimeter ) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (tweleve milimeter) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleanin oil, grease, dirt and other foreign sand papering and knotting. Ready mixed paint brushing wood primer pink as per PWD specification. The rates are inclusive cost and carriage of materials. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint other then white,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

20mm (Twenty milimeter) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimeters) in girth, in rough side with cement mortar 1:6 (one cement isto six sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Supplying and fixing 4mm thick (four milimeter) Plain glass panes with putty and nails including removal of broken glass panes wherever necessary The rates are inclusive cost and carriage of materials. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing stainless steel railing for stair case having bluster in vertical posts 50mm (fifty) millimeter dia including cutting and fixing. The rates are inclusive cost and carriage of materials. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Rakesh Kapoor

Bhupinder Singh

Ashish Chauhan