Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹49.7 LAccepted-AOC | L-1 | Accepted-AOC L-1 bidder | |
| 2 | L-2₹49.8 L+₹16,226.69 (0.33%)Rejected-Finance 180 C JEEVAN NAGAR NEW DELHI 110014 | NEW DELHI | NEW DELHI | DELHI | 110014 | L-2 | Rejected-Finance L-2 bidder | |
| 3 | L-3₹51.0 L+₹1.3 L (2.62%)Rejected-Finance | L-3 | Rejected-Finance L-3 bidder | |
| 4 | L-4₹51.4 L+₹1.7 L (3.52%)Rejected-Finance | L-4 | Rejected-Finance L-4 bidder |
Tender Value
₹37.2 L
EMD Value
₹46,600
Closing Date
26 May 2022, 5:00 pmClosed
General Manager (Civil/Welfare), CED,
Office of General Manager (Civil), CED, BCCL, Dhanbad
Roof treatment at quarters situated at Ex-coal board colony under JNTA
2022_BCCL_244026_1
BCCL/CED/TC/eNIT-04/22-23/158 dt 14.05.22
Open Tender
Civil Works - Others
Item Rate
45 days
Jagjiwan Nagar
As per NIT
4 documents required · 4 mandatory
₹46,600
2 Jul 2022
16 May 2022
27 May 2022
16 May 2022
26 May 2022
16 May 2022
16 May 2022 - 20 May 2022
Amount
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322
Removal of old\damaged tarfelt & disposal of debrises with 150 m lead etc
12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110 mm bend
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe
Removing unwanted trees \plants from wall of roof including removing roots by cutting wall &roof of filling the same by bricks bats of PCC (1:2:4) finishing the same with CM (1;4) including scaffolding etc
carriage of bludge rubbish
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand)
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Applying cement slurry on roof before laying grading @ 1 kg \sqm including prepartion of surface clearing complete etc
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20MM dai
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 MM Dai
25 mm nominal bore, 152mm long, weighing not less than 440 gms
Total impact of GST for the purpose of CTC
M K PETRO PRODUCTS INDIA PRIVATE LIMITED
UJJWAL INDUSTRIES
JALNIDHI BITUMEN SPECIALITIES PVT LTD
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_252090.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .