Retrofitting of existing WSS Jarain under Jal Jeevan Mission (Civil Works)

Amount

Earth work in excavation by manual means in trenches for foundation , drains , pipes cables etc (not exceeding 1.5 mtr in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soils.

Laying and fitting ofG.I. pipes (all classes) and HDPE pipe complete

HDPE pipe 90mm dia (trench size 0.60 x 0.70)

HDPE pipe 75mm dia (trench size 0.50 x 0.60)

HDPE pipe 63mm dia (trench size 0.50 x 0.60)

HDPE pipe 50mm dia (trench size 0.45 x 0.50)

HDPE pipe 40mm dia (trench size 0.40 x 0.50)

HDPE pipe 32mm dia (trench size 0.30 x 0.40)

GI pipe 20mm dia (trench size 0.20 x 0.25)

GI pipe 15mm dia (trench size 0.20 x 0.25)

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Providing and fixing gun metal gate valve with C.I wheel of approved quality as per BIS specifications (Screw end) 40 mm dia

Providing and fixing gun metal gate valve with C.I wheel of approved quality as per BIS specifications (Screw end) 50 mm dia

Providing and fixing gun metal gate valve with C.I wheel of approved quality as per BIS specifications (Screw end) 65 mm dia

Providing and fixing gun metal gate valve with C.I wheel of approved quality as per BIS specifications (Screw end) 80 mm dia

Providing and fixing 80 mm dia C. I. sluice valve/ Check valve as per specifications IS: 14846 for control purpose of different dias including joining material , bolts, nuts , washer, rubber insertions etc.

Welding of joints by electric arc welding including testing and commissioning of joint incl. carriage of set and all other accessories including making arrangement for electric supply / arrangement for generator etc. complete

Making interconnection of Gi distribution branch with GI Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 25mm to 40mm dia.

Making interconnection of Gi distribution branch with GI Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 50mm to 80mm dia.

Providing and fixing brass stop cock of approved quality 15 mm nominal bore

Providing and fixing brass ferrule with C.I. mouth cover including borring and tapping the main 15 mm nominal bore

Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in all kind of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required lane, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand , filling the joints with fine sand etc. alll complete as per the direction of Engineer-in- charge.

Carriage of Sand from source to site of work for an av. Distance of 10 km by Mechanical Transport and 100 mtr by head load

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 10 km and 100 mtr by head load

Carriage of cement by Mechanical Transport 15 km and 100 mtr by head load incl. cost of loading, unloading and stacking

Carriage of GI pipe / HDPE pipe fromDistrict / Divisional Store by mechanical transport to site of work / dumping place ( to be identified by Engineer-in- charge) incl. cost of loading and unloading for an avg. distance of 35 km and 500 mtr head load

M/S SUSHIL GOVT CONTRACTOR

JASVIR SINGH