Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹17.5 L+₹3,230.80 (0.19%)Rejected-Finance INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L2 | Rejected-Finance Rejected due to bidder not L1 | |
| 3 | L3₹18.3 L+₹88,541.21 (5.07%)Rejected-Finance | L3 | Rejected-Finance Rejected due to bidder not L1 |
Tender Value
₹19.4 L
EMD Value
₹38,800
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
SPL REPAIRS TO BLDG NP 145 AT ZONE A AHMEDABAD
2022_MES_544746_1
8279/E8
Open Tender
Civil Works
Works
180 days
GE (Army) Ahmedabad
As per NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹38,800
Yes
27 Sept 2022
11 Aug 2022
2 Sept 2022
11 Aug 2022
31 Aug 2022
17 Aug 2022
11 Aug 2022 - 17 Aug 2022
Amount
Demolition of brick work built in cement mortar of any description complete.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete.
Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where complete.
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, RCC tank, landing, chajjas and similar suspended work complete.
Dismantling timber scantling 40Sqcm and over in section in any position in unframed work as in rafters, purlins etc complete.
Dismantling of wrought iron work or mild steel work of any description not otherwise provided complete
Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets complete.
M&L Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface etc complete.
M&L PCC in 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including weathering round or chamfered and use of necessary form work as required complete.
M&L for PCC 1:2:4 type B1 using 20mm size graded stone aggregate as in benching of man holes including making drains and necessary form work finishing even and smooth with using extra cement complete.
M&L for RCC (Nominal mix) type B1 1:2:4 (20 mm graded aggregates) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete.
M&L for RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete.
M&L for cutting out concrete blocks, slabs, brickwork or stone masonry (in alter nate course), forming toothings for and bonding new work in cement mortar 1:4 into old work, including new materials entering old wall complete.
Supplying & applying Integral waterproofing compound complete.
M&L brick work with sub class 'B' bricks old size straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 , complete.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth in brick wall complete.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like set in cement mortar (1:4) ncluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
M&L Formwork to rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete.
M&L Formwork to rough finished surfaces of sides and soffits of floor or roof beams, beam haunch girders, bressummers, lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams complete.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete.
Taking down chowkhats or frames area exc. 1.50 Sqm and n. exc 4.00 Sqm each with shutters (without taking off shutters from the frames) complete.
M&L for Second class hardwood Glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete.
S&F for factory made 30mm thick flush shutter , Solid core , construction with solid board core and plywood face panels commercial type on both sides complete.
S&F Factory made solid panel PVC door /cupboard shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.
S&F for factory made Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in opening as per specification and drawing complete.
S&F 200mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S&F 300mm long aluminium alloy anodised sliding door bolts complete complete.
S&F 100 mm long mild steel butt hinges, medium weight cold rolled complete.
S&F 150mm extruded aluminium alloy handles fabricated type anodised complete..
S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete complete
M&L for TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming complete.
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; flats fixed with angle cleats etc conforming to Fe.410-W (Gde-E-250, Quality-A) complete
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe.410-W (Gde-E-250, Quality-A) complete.
S&F mild steel Gde Fe 410-O or Fe 310-O Chowkhats and frames of door shutters ( any type, size etc.) of angle, Tee or any section with MS plates/ gusset plates, cleats, hold fast etc including fixing of hinges by welding, complete.
S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, rubber gasket, aluminium beading etc complete .
S&F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18 mm) and 3 track sliding shutters duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, aluminium alloy handles, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.
M&L aluminium decorative grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges valley gutters etc fixed with self tapping screws complete.
M&L for pre-polished kota stone slab 18-25mm thick as in shelves including cutting groves in wall making good disturbed surface, matching with existing surface etc; rubbing and polishing complete.
M&L for machine cut kota stone as in flooring, stair case landing. treads of steps etc, 18-25mm thick over & including 15mm thick in cement mortar 1:6 cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with rubbing and polishing complete.
M&L for machine cut Kota stone slab 18-25mm thick in riser of steps, skirting, dado and pillar laid over CM 1:4 cement screed and jointed, pointed complete.
M&L providing PCC 1:3:6, type C2 (using 40 mm graded aggregate), 75 mm thick, finishing cement concrete surfaces even and smooth without using extra cement as in plinth protection, path etc including necessary form work and provision of bituminous joints mixed with bitumen and sand at intervals not exc 3.00mtr complete.
M&L for 75mm thick cement concrete type D-2 (1:4:8) (using 40 mm graded stone aggregate) as in subbase for floors complete.
M&L for machine pressed coloured pre-cast concrete glossy interlocking rubber moulded paver block any shape and size conforming to IS 15658-2006 of 60mm thickness including M-35 grade with grey cement and pigment and Sand filling 50mm thick under floor/over floor or in foundations including well ramming complete.
S&F Providing and laying at or near ground level factory made machine pressed kerb stone of M-25 grade cement concrete (L-300mm T-100mm H-350 mm) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required & all necessary earth work complete.
S&F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:4 complete.
M&L for Non skid ceramic (colored) 7 to 8 mm thick as in floor area of each tile exceeding 0.11 Sqm but n exceeding 0 .18 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors complete.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.
Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete.
M&L Rendering on fair faces of brick work of thickness 15 mm thick in CM (1:4) mixed with water proofing compound in top @ 3% by weight of cement or as per manufacturers instructions finishing the surface even & smooth with out using extra cement complete.(WPC measured and paid separately).
M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with in CM 1:6 is to be finished even & smooth (without using extra cement) wall complete.
M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of white cement primer complete.
M&L for Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete.
M&L for preparation of new plastered surfaces on walls and applying two coats of oil oil bound distemper with Priming plastered and other surfaces with alkali resistant priming paint with 1.5mm average thick wall care putty complete
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over 1.5mm average thick wall care putty with Priming plastered and other surfaces with alkali resistant priming paint walls complete.
S&F in repair 18mm thick forex panel high density PVC foam board fixed with nails/ screws to frame works as in cabinets cupboards including required beading and necessary fittings and fixture etc complete.
S&F in reapair 1mm thick PVC decorative laminated sheet fixed with approved adhesives complete.
S&F MS Auto hinges of crank 0 degree & 90 degree, fixed with screws to timber frame complete.
S&F magnetic catcher for cupboard complete.
S&F Stainless steel butt hinges medium weight 100mm long complete.
S&F in repairs 25 mm dia stainless steel fancy type curtain rod with brackets of stainless ends etc fixed complete.
S&F 4mm thick coloured textured designer ceiling board of size 595X595 mm fixing with screws/clips including Tee grid suspension system of size 600 mm x600 mm type-1 made out of roll framed hot dipped galvanised steel zinc coated of not less than 120 gm/sqm ,main runner shall be 0.3 mm thick of section 24 mmX33 mm cross runner 0.3 mm thickof section 24 mmx25 mm,wall angle shall be 0.63 mm thick of section 24 mmx24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod ,system exposed portion shall be pre painted polyster coated in off white/white in colour complete
Taking up or down steel tubing 15 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete.
Taking up or down steel tubing 20 mm bore of pipe and connections of any description and from any position incl cleaning for refixing or removing from site complete.
S&F 15 mm dia bore medium grade GI tubing with removal socket joint, togheter with all tube fittings (such as bents, elbows, tees, short pieces, connections, caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed to walls in floors, ceiling and making good complete.
S&F 20 mm dia bore medium grade GI tubing with removal socket joint, togheter with all tube fittings (such as bents, elbows, tees, short pieces, connections, caps, plugs and unions etc and fixed with clips wall hooks, wooden plug etc fixed to walls acr in floors, ceiling and making good complete.
Dismantling water tanks and removing to store exceeding 500 ltrs and n exc 1000 ltrs complete.
S&F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc complete.
S&F in repair CP bib taps cast copper alloy fancy type with cruth or butterly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete.
S&F in repairs gun metal or gate valves with iron wheel head screwed both ends for iron pipe and fixed to 20 mm dia complete.
S&F in repairs Ball brass valves, high pressure with polythene float and fly nut screwed for iron pipe or brass ferrule and fixed to 20 mm dia pipe complete.
S&F in repairs PVC connections 600 mm long, 15 mm size with PTMT nuts complete.
S&F in repairs PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F in repairs PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
S&F in repairs PVC (SWR) bends any radius, 75 mm bore complete.
S&F in repairs PVC (SWR) bends any radius, 110 mm bore complete.
S&F in repairs PVC (SWR) vent cowl, 110 mm dia complete.
S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete.
S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
M&L Cement concrete type 1:4:8 type D2 concrete bed to drain pipe of dia 150 mm including packing under and hounching against the sides of pipes after they are laid and tested complete.
M&L Reinforced concrete pipes, class NP2, 150mm dia laid and jointed with collars complete.
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete.
S&F in repairs 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts of length 600 mm complete.
S&F in repairs vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including connecting to fushing cistern low or high level, 32mm dia polyethylene fush pipe etc (excluding cost of flush tank) including provn of PCC 1:5:10 concrete bedding complete.
S&F in repairs vitreous chinaware EWC padestal type closet with white seat & cover with flat bottom with hinging with PVC (SWR) P trap device complete.
S&F in repairs health faucet spray type brass, chromium plated, and 1.5 m long PVC flexible pipe complete.
S&F in repair soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmx150mmx100mm complete.
S&F in repairs 15mm bore, fancy type Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400m excluding taps, chain & plug & porcelain stopper including brackets & cutting for pinning in ends of bracketes or erecting stand, waste pipe complete.
S&F in repair angle valve 15 mm dia cast copper alloy CP Fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete
Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.
M&L for Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm with 3 mm thick phenolic laminated white sheet cover for mounting of Piano Type switches, sockets, fan regulators for One light / Exhaust fan point controlled by one switch complete
All as per Item No 98 above but for One fan point controlled by one switch.
All as per Item No 98 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per Item No 98 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 98 above but for One bell point controlled by one bell push.
All as per Item No 98 above but for one 16 amp socket outlet modular type for controlled by one switch on independent board with conductor cable 2.5 sqmm complete.
S&F modular switch one way 6 amp 1 module complete
S&F modular switch one way 16 amp 1 module complete
S&F modular socket 6/16 - 2/3 pin combined 2 module complete
S&F modular socket 6 amp 2/3 pin combined 2 module complete
S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete
S&F modular hum free electronic step fan regulator, 100 watt 2 module complete
S&F bell multi music type, AC, 240 volts complete.
S&F bell push, flush type, 6 amp 240 volts complete.
S&F angle holder, insulated polycarbonate body with back plate complete.
M&L in repairs submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth continuity conductor complete.
S&F LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " complete.
S&F LED fixture 8 watt including connection & similar to Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 complete.
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable complete.
S&F in repairs MCB SPN, 240 volts, 8 ways distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete
S&F in repairs MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.
M&L in repairs earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.
S&F in repairs MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete.
S&F in repairs MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete.
S&F in repairs MCBs Four pole 63 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408702 complete.
Taking down Ceiling Fan of any make, type and sweep by disconnecting Electric Connection and deposit to MES store.
S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 4 core complete.
Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out complete.
Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.
Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.
S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.
M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.
Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.
M&L for Horizontal boring holes in soil for road crossing and getting out and disposal of spoil to a distance n exc. 50 m for a pipe of dia 40 mm in size complete.
DMA PROJECTS
DATTA SURYAKANT CHAUDHARI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .