New Construction of UG and PG Hostel Building at GMERS Medical College Valsad, Ta.Dist. Valsad.

Name of Work: New Construction of UG and PG Hostel Building at GMERS Medical College Valsad, Ta.Dist. Valsad.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

1 Civil 3,472.65 Sqm 2.84 Rupees Two and Paisa

Clearing and grubbing road land includding uprooting rank vegetation, grass, bushes, Eighty Four Only

shrubs, saplings and trees girth upto 300mm removal of stumps of tress cut earlier and

disposal of unserviceable materials.

(C) By Mechanical means in area of light jungle.

2 Demolition including stacking of serviceable materilas and disposal of unserviceable 56.00 Cum 1,057.85 Rupees One Thousand

materials with all lead and lift. (i) R.C.C. work Fifty Seven and Paisa

Eighty Five Only

3 Excavation for foundation upto any depth including sorting out and stacking of useful 32,707.00 Cum 146.45 Rupees One Hundred

materials and disposing off the excavated stuff all lead & Lift including dewatering etc Forty Six and Paisa Forty

complete. Five Only

(A) Loose or soft soil

4 Filling available selected / approved stacked excavated earth (excluding rock) (Earth 7,661.06 Cum 130.39 Rupees One Hundred

which is stacked at any location outside the campus non- objectionable place shall be Thirty and Paisa Thirty Nine

found by the contractor) in trenches, plinth, sides of foundations etc. in layers not Only

exceeding 20 cm. in depth consolidating each deposited layer by ramming and

watering etc. complete as directed by Engineer Incharge.

5 Filling in plinth with sand under floors including watering ramming, consolidating and 273.00 Cum 460.19 Rupees Four Hundred

dressing complete. Sixty and Paisa Eighteen

6 Filling in foundation and plinth, Surrounding Campus, Roads with murrum or selected soil 6,698.00 Cum 289.06 Rupees Two Hundred

in layers of 20cm. thickness including watering, ramming and consolidating all lead & Eighty Nine and Paisa Six

Lift etc. complete as directed by Engineer Incharge. Only

7 Providing and laying mix of Lime and Sand of 30% of Lime and 70% of Sand of 150mm 487.00 Cum 643.37 Rupees Six Hundred Forty

thickness etc. including all materials, labours etc. a complete as directed by E.I.C. Three and Paisa Thirty

8 Providing and laying black trap rubble minimum 200mm size, rubble soling 30 cm thick, 1,251.00 Cum 1,877.59 Rupees One Thousand

in a compact manner, foudation, Using 230 to 300 mm and Void filling with GSB at 4mt Eight Hundred Seventy

depth in muddy Soil. Cut size stones, covering with a layer of GSB after filling levelling Seven and Paisa Fifty Nine

the surface, including watering, ramming well and consolidating each layer, as Only

9 Providing and fixing exterior wall cladding/facade using Aluminium Composite Panel 553.36 Sqm 2,929.00 Rupees Two Thousand

(ACP) of approved make, shade, framing, fixture and thickness (e.g., 4 mm total Nine Hundred Twenty Nine

thickness with 0.5 mm aluminium skin on both sides, PVDF coated finish). Only

10 Providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone 1,142.00 Cum 3,683.34 Rupees Three Thousand

aggregates 20 m.m. nominal size) and curing complete including the cost of form work Six Hundred Eighty Three

and excluding the rate of reinforcement for reinforced cement concrete in: All Floor and Paisa Thirty Four Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

11 Providing and laying plain Cement Mortar 1:4 ( 1- Cement : 4 - Fine Sand ) of average 407.00 Cum 2,863.68 Rupees Two Thousand

thickness 50 mm for all leads and lifts including finishing, curing etc. complete. All Floor Eight Hundred Sixty Three

and Paisa Sixty Eight Only

12 Providing and laying cement concrete 1:3:6 (1 Cement : 4 coarse sand :8 hand broken 337.00 Cumt 3,005.76 Rupees Three Thousand

stone aggregates 40 mm nominal size) and curing complete excluding cost of form Five and Paisa Seventy Six

(A) Foundation and plinth

13 Providing laying controlled cement concrete M-200 work with curing complete 378.00 Cum 4,518.74 Rupees Four Thousand

including the cost of necessary form work and excluding the rate of reinforcement for Five Hundred Eighteen

reinforced concrete work in. and Paisa Seventy Four

( A ) Plinth Slab Only

14 Providing laying controlled cement concrete M-300 work with curing complete 3,624.83 Cum 4,494.50 Rupees Four Thousand

including the cost of necessary form work and excluding the rate of reinforcement for Four Hundred Ninety Four

reinforced concrete work in. and Paisa Fifty Only

( A ) Foundations footings Base of columns and mass concrete.

15 Providing laying controlled cement concrete M-300 work with curing complete 413.80 Cum 5,988.29 Rupees Five Thousand

including the cost of necessary form work and excluding the rate of reinforcement for Nine Hundred Eighty Eight

reinforced concrete work in. and Paisa Twenty Nine

(D ) Columns, pillars posts and struts square, rectangular, polygonal Only

16 Providing laying controlled cement concrete M-300 work with curing complete 763.00 Cum 5,357.04 Rupees Five Thousand

including the cost of necessary all type of form Work (As per Requirements) and Three Hundred Fifty Seven

excluding the rate of reinforcement for reinforced concrete work in. and Paisa Four Only

(H ) Wall / Drop Pardi

17 Providing laying controlled cement concrete M-300 work with curing complete 508.00 Cum 6,251.90 Rupees Six Thousand Two

including the cost of necessary form work and excluding the rate of reinforcement for Hundred Fifty One and

reinforced concrete work in. Paisa Ninety Only

(C) RCC Floor Slab Beam

18 Providing laying controlled cement concrete M-300 work with curing complete 515.90 Cum 6,361.99 Rupees Six Thousand

including the cost of necessary form work and excluding the rate of reinforcement for Three Hundred Sixty One

reinforced concrete work in. and Paisa Ninety Nine

Basement floor Only

( B ) Slabs, landing, shelvas, Balconies etc

19 Providing laying controlled cement concrete M-300 work with curing complete 15.00 Cum 6,927.59 Rupees Six Thousand Nine

including the cost of necessary form work and excluding the rate of reinforcement for Hundred Twenty Seven

reinforced concrete work in. and Paisa Fifty Nine Only

(C) RCC Stair Case

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

20 Providing laying controlled cement concrete M-300 work with curing complete 1,603.36 Cum 6,228.87 Rupees Six Thousand Two

including the cost of necessary form work and excluding the rate of reinforcement for Hundred Twenty Eight and

reinforced concrete work in. Paisa Eighty Seven Only

(D ) Columns, pillars posts and struts square, rectangular, polygonal in plan

21 Providing laying controlled cement concrete M-300 work with curing complete 1,438.00 Cum 5,597.62 Rupees Five Thousand

including the cost of necessary all type of form Work (As per Requirements) and Five Hundred Ninety

excluding the rate of reinforcement for reinforced concrete work in. Seven and Paisa Sixty Two

Above Plinth Only

(H ) Wall / Drop Pardi

22 Providing laying controlled cement concrete M-300 work with curing complete 3,029.10 Cum 6,492.48 Rupees Six Thousand Four

including the cost of necessary form work and excluding the rate of reinforcement for Hundred Ninety Two and

reinforced concrete work in. Paisa Forty Eight Only

(C) RCC Floor Slab Beam

23 Providing laying controlled cement concrete M-300 work with curing complete 675.09 Cum 7,479.25 Rupees Seven Thousand

including the cost of necessary form work and excluding the rate of reinforcement for Four Hundred Seventy

reinforced concrete work in. Nine and Paisa Twenty

(C) RCC Lintel, Sill, Coping and Mullians Bands Five Only

24 Providing laying controlled cement concrete M-300 work with curing complete 752.50 Cum 6,448.04 Rupees Six Thousand Four

including the cost of necessary form work and excluding the rate of reinforcement for Hundred Forty Eight and

reinforced concrete work in. Paisa Four Only

25 Providing laying controlled cement concrete M-300 work with curing complete 3,223.00 Cum 6,602.57 Rupees Six Thousand Six

including the cost of necessary form work and excluding the rate of reinforcement for Hundred Two and Paisa

reinforced concrete work in. Fifty Seven Only

( B ) Slabs, landing, shelvas, Balconies etc

26 Providing laying controlled cement concrete M-300 work with curing complete 424.00 Cum 6,598.27 Rupees Six Thousand Five

including the cost of necessary form work and excluding the rate of reinforcement for Hundred Ninety Eight and

reinforced concrete work in. Paisa Twenty Seven Only

(C) RCC Stair Case

27 Providing , laying CRS Bar FE 500 D reinforcement for R.C.C. work including bending, 8,80,736.00 Kg 79.36 Rupees Seventy nine and

binding and placing in position complete. Paisa Thirty Six Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

28 Providing, laying CRS Bar FE 500 D reinforcement for R.C.C. work including bending, 15,05,261.00 Kg 85.35 Rupees Eighty Five and

binding and placing in position complete. Paisa Thirty Five Only

29 Supplying cutting,bending,binding and placing in position steel as per plan and design 12.80 Mt. 79,362.77 Rupees Seventy Nine

and as rer ISS 2502 including cost of Steel and binding Wire for reservoir/structure only Thousand Three Hundred

including lift up to 6 meter height or depth below G.L for all diameter.Water Tank Sixty Two and Paisa

CRS Steel Fe – 500 D grade for all diameters. Seventy Seven Only

30 Providing and erecting False Staging with MS props or MS H-frames for each additional 2,667.00 Sqm 579.03 Rupees Five Hundred

height of propping and centering where the height of propping and centering exceeds Seventy Nine and Paisa

4.0 meter between supporting floor to ceiling supporting as required with adequate Three Only

bracing/ propping with steel props/ H frames etc. as directed by EIC including cost of

de-shuttering and centering at all levels / all floors for plumbing electrical and civil

works. Note : Plan area will be measured Height upto 12.0 M

31 Providing and position PVC Sleeves in RCC elements like walls slabs beams etc. of 6 154.00 Each 42.42 Rupees Forty Two and

Kg/cm2 UPVC Pipes and diameter of taking out service pipelines cables road Paisa Forty Two Only

infrasturcture work etc. upto 0.5 mtr. length for all floors/ all levels / all heights.

32 b) 75mm dia. 141.00 Each 65.65 Rupees Sixty Five and

Paisa Sixty Five Only

33 c) 110mm dia. 111.00 Each 124.23 Rupees One Hundred

Twenty Four and Paisa

Twenty Three Only

34 Brick work using Common burnt clay building bricks having crushing strength not less 714.00 Cum 4,021.02 Rupees Four Thousand

than 35 kg./sq.cm. in foundation and plinth in cement mortar 1: 6 (1 cement : 6 fine Twenty One and Paisa

sand) in true line and level including curing, scaffolding, racking out the joints etc. Two Only

complete as directed by engineer in charge.

(B) Conventional

35 Half brick masonry in common brunt clay building bricks having crushing strength not 29.00 Sqmt 640.33 Rupees Six Hundred Forty

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in and Paisa Thirty Two Only

superstructure above floor two level (B) Conventional

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

36 Providing and laying autoclave aerated concrete blocks as per drawing in single or 84.00 Cum 4,580.35 Rupees Four Thousand

multiple layers with Ready mix joining mortar. Crushing strength of aerated concrete Five Hundred Eighty and

block shall not be less than 40 KG/sqcm, minimum density in oven dry condition Paisa Thirty Five Only

between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, fire

resistant 4 hours, in true line level and plumb and cleaning the surface with necessary

tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks

and 0.10 percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-

1972 etc. at any heights, all depths, any levels (in foundation and superstructure) and

all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer

Incharge for all civil, plumbing, electrical & infrastructure work

37 Providing and laying autoclave aerated concrete blocks as per drawing in single or 6,724.00 Cum 4,838.87 Rupees Four Thousand

multiple layers with Ready mix joining mortar. Crushing strength of aerated concrete Eight Hundred Thirty Eight

block shall not be less than 40 KG/sqcm, minimum density in oven dry condition and Paisa Eighty Seven

between 651 to 750 KG/CUM, thermal conductivity shall not exceed 0.30 w/mk, fire Only

resistant 4 hours, in true line level and plumb and cleaning the surface with necessary

tool tackles The drying shrinkage shall be not more than 0.05 percent for Grade 1 blocks

and 0.10 percent for Grade 2 blocks when tested in accordance with IS : 6641 (Part-2)-

1972 etc. at any heights, all depths, any levels (in foundation and superstructure) and

all places including curing, scaffolding, racking / flush jointing etc complete, as per

drawing / specification and approved by architect and as directed by Engineer

Incharge for all civil, plumbing, electrical & infrastructure work

38 Brick work using Common burnt clay building bricks having crushing strength not less 611.60 Cum 4,569.69 Rupees Four Thousand

than 35 kg./sq.cm. in cement mortar 1: 5 (1 cement : 5 fine sand) in true line and level Five Hundred Sixty Nine

including curing, scaffolding, racking out the joints etc. complete as directed by and Paisa Sixty Nine Only

engineer in charge.

(B) Conventional

For all Floor lead & lift.

39 Providing and fixing stainless steel ( Grade 304) for railing, Daso, bump rail, pendant, 11,235.00 Kg 616.30 Rupees Six Hundred

ladder, guard rail, grating, corner guard etc. made of Hollow tubes, channels, plates Sixteen and Paisa Thirty

etc., including welding, grinding, buffing, polishing and making curvature (wherever Only

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only

weight of stainless steel members shall be considered excluding fixing accessories such

as nuts, bolts, fasteners etc.) Rate includes for all lead & lift & as per directed by EIC.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

40 Providing and fixing M.S. grill (using Bright Bar) of required pattern top of windows etc. 37,400.00 Kg 75.75 Rupees Seventy Five and

with M.S. flats at required spacing and frame alround square or round headed bolts Paisa Seventy Five Only

and nuts or by screws.including applying a priming coat (epoxy coat) of red lead paint

and two coats of oil painting etc complete, as per architectural drawings and the

directions of Engineer-in-charge. (A) Plain grill

41 Providing, supplying and fixing in position Hollow pressed steel door frame of 105 x 60 x 6.00 Rmt 239.37 Rupees Two Hundred

1.2 mm profile fabrication with frame of 1.2 mm galvanised M.S. sheet. It shall generally Thirty Nine and Paisa Thirty

confirm to IS 4351/03 with suitaable 1/2 rebates for fixing shutter. Each frame shall Seven Only

contain S.S. hinges of size 100 x 2.5 mm thick. Each frame shall contain hinges as above

with jamb base, tie with channel thresold, flat for fixing hinges and motorguard with

arrangement for fixing hardware like Aldrop, tadi, handle, etc. complete with one coat

of zinc chromate redodaxide primer etc. complete as per detailed.

42 Providing and fixing 35 mm thick Decorative type Water proof flush door Single leaf 1,062.00 Sqm 3,166.35 Rupees Three Thousand

shutters with cross board and face veneer or plywood face panels with 1.0 mm thick One Hundred Sixty Six and

laminate on both sides including providing and fixing all stainless steel fixtures and Paisa Thirty Five Only

fastening like hinges, handle, door latch, tower bolt, door stopper etc. of (Approved

makes -dormacaba, ozone, inox, Hetich and Olive, any other make approved quality)

etc. complete as per architectural drawings and the directions of Engineer-in-charge.

43 Designing,Providing and fixing 35 mm thick Decorative type Water proof flush door 21.00 Sqm 3,262.30 Rupees Three Thousand

Double leaf shutters with cross board and face veneer or plywood face panels with Two Hundred Sixty Two

frame of Aluminium (Domal Section or Equivalent Make) section and ply-wood face and Paisa Thirty Only

panels1.0 mm thick laminate on both sides including providing and fixing all stainless

steel fixtures and fastening like hinges, handle, door latch, tower bolt, door stopper etc.

of (Approved makes -dormacaba, ozone, inox, Hetich and Olive, any other make

approved quality) etc. complete as per architectural drawings and the directions of

Engineer-in-charge.

44 Designing, Providing and fixing 35 mm thick Decorative type Water proof flush door 11.00 Sqm 4,083.43 Rupees Four Thousand

Single leaf shutters with 1 nos of Vision panel of size 300 x 700 mm solid core construction Eighty Three and Paisa

with frame of Aluminium (Domal Section or Equivalent Make) section & 8mm thick Forty Three Only

fixed glass on top portion and ply-wood face panels, 1.0 mm thick laminate on both

sides including Stainless steel fixtures and fastening and SS handle including primer coat

of approved quality and two coats of oil painting of door bedding patti etc complete,

as per architectural drawings and the directions of Engineer-in-charge.

45 Providing and Fixing Sliding door of 8mm thick Glass sheet cover with Non reflective 1,339.00 Sqm 4,284.42 Rupees Four Thousand

solar contact film for fixing on glass and Aluminium Frame (Domal Section or Equivalent Two Hundred Eighty Four

Make, Min. member Thikness 2.00-3.00mm) with Granite frame at outer jamb.The Door and Paisa Forty Two Only

Shutters shall have all req. hardware's such as S.S. Handle for Door 15 Cm size of ASIS

304 Grade,Locks Godrej Mortice lock cover etc. complete as per drawing and

instructions of Architect.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

46 Designing, Providing and fixing factory made single extruded WPC (Wood Polymer 1,567.00 Rmt 563.20 Rupees Five Hundred Sixty

Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat Three and Paisa Twenty

comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium Only

carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic

additives (maximum oxicity index of 12 for 100 gms) fabricated with miter joints after star

headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal

strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2,

modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category

with property of being termite/borer proof, water/moisture proof and fire retardant and

fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length

complete as per direction of Engineer-In- Charge. Note: For WPC solid door/window

frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be

acceptable. Variation in profile dimensions on plus side shall be acceptable but no

extra payment on this account shall be made. applying PVC solvent cement and

screwed with full body threaded Complete as per direction of Engineer-in-Charge.

1) Frame size 45 x 70 mm

47 Designing, Providing and fixing factory made single extruded WPC (Wood Polymer 503.00 Sqm 3,468.23 Rupees Three Thousand

Composite) solid doors in both side pattern flush door shutter of required size comprising Four Hundred Sixty Eight

of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural and Paisa Twenty Three

fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity Only

index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal

strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2,

modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category

with property of being termite/ borer proof, water/moisture proof and fire retardant and

including stainless steel butt hinges of required size with necessary full body threaded

star headed counter sunk S.S screws, Handles, lock, Stopper, Door closer, Tower bolt

(Approved makes -dormacaba, ozone, inox, Hetich and Olive, any other make

approved quality) all as per direction of Engineer-In- Charge.

(a) 30 mm thick

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

48 Designing, Providing and fixing of 60 micron powder coated Metal Fire door from ISO 9001:2015 234.00 Sqm 12,685.60 Rupees Twelve Thousand

certified Manufacturer . The door must have been manufactured with galvanized - GI sheet of Six Hundred Eighty Five

GPSP Grade as per IS 277. All Fire doors must satisfy the requirement of latest NBC 2016 Part 4 for and Paisa Sixty Only

Fire & Life Safety guidelines for 120 minutes Fire Rating with minimum 20 minutes Insulation

properties along with its Stability & Integrity for 120 minutes. The Prototype sample of the door

must carry a prior test evidence as per IS 3614 part-2 / BS 476 Part 20 &22 . The manufacturer

must submit the copy of test evidence prior to start of production .The offered test certificate

should either carries it's Validity or certificate must not be older than 5 years from CBRI / NABL

Accreditated Lab. Recommended fire door must also be certified by a third party evaluation

program from approved International agency. All doors should be finished with Powder coating

in desired regular RAL Shades. Door frame shall be Single rebate profile of section 100 x 57 mm

made out of 1.20mm thick galvanized steel sheet with a factory pre-punched groove so as to

accommodate Fire & smoke seal size 10x4mm . Frames should be butt jointed and field

assembled with bolting system for proper strength .Frames should be provided with back plate

for anchor fasteners for installation on a finished plastered wall opening. Door leaf should be

minimum 46mm thick fully flush double skin door. Door leaf must be manufactured from 0.8mm

(22 gauge) thick galvanized steel sheet. The door should be provided with reinforcement pads

to receiving appropriate Hardware. The Shutter shall be filled with proprietary infill material . For

Double leaf doors; astragal has to be provided on meeting stile for both active and inactive

leaf. Vision panels wherever required should be of 120 minutes fire rating and should be of non-

49 Providing and applying transluscent film on glazed surface as per drawing etc, 108.00 Sqm 543.38 Rupees Five Hundred

complete as directed by Engineer in charge. Forty Three and Paisa

Thirty Eight Only

50 Designing,Providing & Fixing Three Track extruded aluminium slide windows having 763.00 Sqm 5,059.09 Rupees Five Thousand

colour anodised sections (of Domal Section or Equivalent Make) as per design. The cost Fifty Nine and Paisa Nine

is including of locking arrangement, Roller, Bearing, 5 mm thick clear float toughned Only

glass with fitting & fixture, black EPDM & transperent silicon Sealant on outer framing, all

necessary accessories including Mosquito Shutter conststing of S.S.wire gage of

avaerage width aperature 1.4 mm with wire of dia meter 0.63mm necessary cutting

and making good etc. for window.etc. complete as per detailed drawings and

instructions of an Architect/ EIC.

51 Designing,Providing & Fixing Four Track extruded aluminium slide windows having 604.00 Sqm 5,781.24 Rupees Five Thousand

colour anodised sections (of Domal Section or Equivalent Make) as per design. The cost Seven Hundred Eighty

is including of locking arrangement, Roller, Bearing, 5 mm thick clear float toughned One and Paisa Twenty

glass with fitting & fixture, black EPDM & transperent silicon Sealant on outer framing, all Four Only

necessary accessories including Mosquito Shutter conststing of S.S.wire gage of

avaerage width aperature 1.4 mm with wire of dia meter 0.63mm necessary cutting

and making good etc. for window.etc. complete as per detailed drawings and

instructions of an Architect/ EIC.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

52 Providing and fixing window having extruded aluminum Colour anodized section frame 65.00 Sqm 1,713.70 Rupees One Thousand

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track Seven Hundred Thirteen

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of and Paisa Seventy Only

size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt (of Domal Section or

Equivalent Make) as per design. with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for window.

53 Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 169.00 Sqm 1,525.00 Rupees One Thousand

mm,@ Wt 1.094Kg / Rmt (of Domal Section or Equivalent Make) with colour anodized Five Hundred Twenty Five

alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details and Zero Paisa Only

etc complete for Fix window.

54 Providing and fixing standard extruded of alluminium section of size 63 mm x 38.10 mm x 114.00 Sqm 1,175.56 Rupees One Thousand

1.2 mm (of Domal Section or Equivalent Make) with colour anodized alluminium frame One Hundred Seventy

for ventilation with 5 mm thick frosted glass as per details etc complete for ventilator Five and Paisa Fifty Six

with provision for exhaust fan as per drawing. Only

55 Providing & Fixing Aluminium Box section Anodized and Powder coating-exterior grade 806.00 Sqm 3,622.87 Rupees Three Thousand

both (of Domal Section or Equivalent Make) Louvers with G.I. Frame .etc. complete, Six Hundred Twenty Two

shade & sizeas per detailed drawings and instructions of an Architect/ EIC. and Paisa Eighty Seven

56 Providing and fixing colour Anodized aluminium work for Double leaf Partly Glazed & Partly 47.00 Sqm 3,575.40 Rupees Three Thousand

Panelled Door & Partitions with Anodised aluminium ( anodised transparent or dyed to required Five Hundred Seventy Five

shade according to IS: 1868, Minimum anodic coating of grade AC 15 ) heavy duty extruded and Paisa Forty Only

built up standard tubular sections/appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with

expansion hold fasts including necessary filling up of gaps at junctions, at top, bottom and sides

with required PVC/neoprene felt or sealent of wecker 789 or Dow corning 789 grade so as to

make all joints waterproof etc. Aluminium sections shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including cleat angle, aluminium snap beading for

glazing / panelling, stainless steel screws as per architectural drawings and the directions of

Engineer-in-charge and incl.

Providing and fixing partly glazing in aluminium PARTITIONS with EDPM gasket etc. complete as

per the architectural drawings and the directions of engineer-in-charge with 6.0 mm thick plain

float glass panel of approved shade, approved make and size fixed to the frames and frames

fixed to the walls. The framed ends shall have required brushings for proper sealing.

Providing and fixing Partly Prelaminated High Density Fibre Board in aluminium PARTITIONS with

EDPM gasket etc. complete as per the architectural drawings and the directions of engineer-in-

charge with 12mm thick Prelaminated High Density Fibre Board panel of approved shade,

approved make and size fixed to the frames and frames fixed to the walls. The framed ends

shall have required brushings for proper sealing.

The PARTITION FRAMES with the double groove / single groove / plain frame extruded

alluminium colour anodized section frames of average weight of 2.0 Kg./Rmt to 2.8 kg/RmT as

per detailed drawing, with necessary glazing clips, including SS screws ( best make of

approved quality ) including necessary cutting and making good etc. complete.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

57 Providing and fixing colour Anodized aluminium work for Double/Single leaf Door Partly 27.00 Sqm 4,485.41 Rupees Four Thousand

Glazed Partly AHPL Board paneled PARTITIONS with Anodised aluminium ( anodised Four Hundred Eighty Five

transparent or dyed to required shade according to IS: 1868, Minimum anodic coating and Paisa Forty One Only

of grade AC 15 ) heavy duty extruded built up standard tubular sections/appropriate Z

sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed

with rawl plugs and screws or with fixing clips, or with expansion hold fasts including

necessary filling up of gaps at junctions, at top, bottom and sides with required

PVC/neoprene felt or sealent of wecker 789 or Dow corning 789 grade so as to make all

joints waterproof etc. Aluminium sections shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including cleat angle, aluminium snap

beading for glazing / panelling, stainless steel screws as per architectural drawings and

the directions of Engineer-in-charge and incl.

Providing and fixing partly glazing in aluminium PARTITIONS with EDPM gasket etc.

complete as per the architectural drawings and the directions of engineer-in-charge

with 6.0 mm thick Clear Toughened glass of approved shade, approved make and size

fixed to the frames and frames fixed to the walls. The framed ends shall have required

brushings for proper sealing.

Providing and fixing Partly HPL Board paneled PARTITIONS in aluminium PARTITIONS with

EDPM gasket etc. complete as per the architectural drawings and the directions of

engineer-in-charge with 8mm thick HPL Board paneled of approved shade, approved

make and size fixed to the frames and frames fixed to the walls. The framed ends shall

have required brushings for proper sealing.

The PARTITION FRAMES with the double groove / single groove / plain frame extruded

alluminium colour anodized section frames of average weight of 2.0 Kg./Rmt to

kg/Rmt as per detailed drawing, with necessary glazing clips, including SS screws ( best

make of approved quality ) including necessary cutting and making good etc.

58 Providing and fixing colour Anodized aluminium work for Double leaf Fully Glazed Door 8.00 Sqm 3,461.27 Rupees Three Thousand

with Anodised aluminium ( anodised transparent or dyed to required shade according Four Hundred Sixty One

to IS: 1868, Minimum anodic coating of grade AC 15 ) heavy duty extruded built up and Paisa Twenty Seven

standard tubular sections/appropriate Z sections and other sections of approved make Only

conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips,

or with expansion hold fasts including necessary filling up of gaps at junctions, at top,

bottom and sides with required PVC/neoprene felt or sealent of wecker 789 or Dow

corning 789 grade so as to make all joints waterproof etc. Aluminium sections shall be

smooth, rust free, straight, mitred and jointed mechanically wherever required including

cleat angle, aluminium snap beading for glazing / panelling, stainless steel screws as

per architectural drawings and the directions of Engineer-in-charge and incl.

Providing and fixing glazing in aluminium DOOR with EDPM gasket etc. complete as

per the architectural drawings and the directions of engineer-in-charge with 6.0 mm

thick Clear Toughened glass panel of approved shade and approved make and fixed

to the frames and frames fixed to the walls. The framed ends shall have required

brushings for proper sealing.

The Door shutters section of 85mm x 44.45mm x 2mm weighing 1.417 Kg./Rmt. Top and

bottom rail of 150mm x 44.45mm x 2.2mm weighting 2.376 Kg./Rmt. and central lock

rail of 150mm x 44.45 x 2.65mm and glazing clips of 0.154 Kg/Rmt of extruded

alluminium colour anodized section frames including and anodised aluminium

tubular bar 32mm outer dia 3.0mm thick & 2100 mm long with SS screws in door

including 100mm brass locks ( best make of approved quality ) for aluminium doors,

floor spring including necessary cutting and making good etc. complete.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

59 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of 3,575.00 Sqm 140.95 Rupees One Hundred

stairs for interior plastering finished even and smooth in C M 1:4 ( 1 cement 4 coarse Forty and Paisa Ninety

sand) including finishing etc complete. Five Only

a) Basement Floor

60 Providing & laying 10mm thick cement plaster in single coat on ceilings and sofits of 24,978.00 Sqm 268.87 Rupees Two Hundred Sixty

stairs for interior plastering finished even and smooth in C M 1:4 ( 1 cement 4 coarse Eight and Paisa Eighty

sand) including finishing etc complete. Seven Only

61 Providing & laying 15 mm mala cement plaster in single coat on block/brick/concrete 4,266.00 Sqm 171.80 Rupees One Hundred

wall for interior plastering finished even and smooth in cement mortor 1:3 (1 cement : 3 Seventy One and Paisa

coarse sand) including finishing etc complete. Eighty Only

62 Providing & laying 15 mm mala cement plaster in single coat on block/brick/concrete 56,233.00 Sqm 312.15 Rupees Three Hundred

wall for interior plastering finished even and smooth in cement mortor 1:3 (1 cement : 3 Twelve and Paisa Fifteen

coarse sand) including finishing etc complete. Only

63 Providing & laying 20 mm thick double coat mala cement plaster on interior/exterior 23,575.00 Sqm 272.48 Rupees Two Hundred

block/brick/ concrete work for plastering comprising of base coat of 12 mm thick Seventy Two and Paisa

cement plaster in cement mortar (1 cement: 4 coarse sand) in rough finishing and 8 Forty Eight Only

mm thick top coat of cement mortar 1:2 ( 1 cement : 2 coarse sand) finished with trovel

including scaffolding curing etc. complete in charge Engineer for all height& leads .

64 'Providing & laying 20mm thick sand faced cement plaster on walls above ground level 4,127.60 Sqm 300.66 Rupees Three Hundred

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick and Paisa Sixty Six Only

finishing coat of C.M. 1:1 (1-cement : 1-sand) including scaffolding curing etc.

complete in charge Engineer for all height& leads .

65 Providing & applying Cement plaster 20 mm thick in cement morter 1:2 using water 434.00 Sqmt 204.02 Rupees Two Hundred Four

proofing compound of approved quality incl. finishing etc. completed. and Paisa Two Only

66 Providing and fixing 150 mm wide, approved quality chicken wire mesh at junction of 5,353.00 Sqm 281.79 Rupees Two Hundred

brick work and RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal Eighty One and Paisa

plugs or tag by cement mortar 1:3 before applying the plaster, including curing, Seventy Nine Only

scaffolding all complete as directed.

67 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 5,295.00 Rmt 23.68 Rupees Twenty Three and

including neat cement finishing, watering etc. complete.For all floor Paisa Sixty Eight Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

68 Providing throating or plaster drip, grove and moulding to R.C.C. Chhajja/wall /Ceiling 5,301.00 Rmt 42.17 Rupees Forty Two and

etc. complete. For all floor Paisa Seventeen Only

69 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of 135.00 Sqmt 40.59 Rupees Forty and Paisa

approved brand and manufacture on new wall surface to give an even shade Fifty Nine Only

including thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.

70 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of 22.00 Sqmt 46.01 Rupees Forty Six and Zero

approved brand and manufacture on new ceiling surface to give an even shade Paisa Only

including thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth

71 Providing and applying Wall & Ceiling painting (three coats) with plastic emulsion paint 75,363.00 Sqm 161.46 Rupees One Hundred

of approved brand and manufacture and two coats of acrylic lapy ( putty) & two Sixty One and Paisa Forty

coats of primer of approved brand and manufacture on under coated wall & ceiling Six Only

surface to give and even shade including throughly brushing the surface free from

mortor droppings and other foreign matter and sand paperd smooth on new work to

give an even shade.for all height.

72 White washing with lime on wall surface (two coats) to give an even shade including 6,151.00 Sqm 12.41 Rupees Twelve and Paisa

thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign Forty One Only

matter. for all height

73 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to 24,165.60 Sqm 114.53 Rupees One Hundred

give an required shape even shade after thoroughly brushing the surface to remove all Fourteen and Paisa Fifty

dirt, and remains of loose powdered materials.etc complete Three Only

74 Painting two coats (excluding priming coat) on new steel and other metal surfaces with 670.40 Sqm 87.81 Rupees Eighty Seven and

enamel paint brushing, interior to give an even shade including cleaning the surface Paisa Eighty One Only

an even shade including cleanicn the surface of all dirt, dust and other foreign

matter.for all height

75 Applying Epoxy Poly-sulphate Paint three coats on new /existing building surface 5,485.00 Sqm 482.78 Rupees Four Hundred

including cleaning surface of dirt, dust & other foreign matter, sand papering, wire Eighty Two and Paisa

brushing as required with all contractor’s materials tools, machinery, scaffolding, lead, Seventy Eight Only

lifts etc. complete as per specifications and as directed by Engineer in-charge

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

76 'Exterior texture: Providing and applying walls with Two Coats of Primer and exterior 23,575.00 Sqm 249.95 Rupees Two Hundred

texture material of approved brand, patent, quality and manufactured approved by Forty Nine and Paisa

Architect. Thoroughly brushing the surface to remove all dirt and dust. The surface Ninety Five Only

should be clean, dry and free from all contaminants and salt stains. Apply smart care

crack seal to fill surface imperfections such as a holes, dents and cracks. Larger

structural cracks also need to be appropriately corrected before application. The

material comes in a ready to apply form, no dilution is needed. Items for all floors, lead,

lift and any height.any shade as approved by Architect/ Engineer in charge. .

77 Providing and laying Full body Vitrified tiles 8 mm to 10 mm thick "Johnson, Marbito, 10,132.69 Sqm 1,404.64 Rupees One Thousand

Nitco, AGL Brand" or equivalent make in flooring, treads of steps and landing laid on a Four Hundred Four and

bed of 20 mm thick cement mortar 1 : 6 (1 cement : 6 coarse sand) finished with flush Paisa Sixty Four Only

pointing in white /coloured cement slurry complete. Shade & Size as per detailed

drawing and as directed by Engineer in charge.

78 Providing and laying Full body Vitrified tiles 8 to 10 mm thick "Johnson, Marbito, Nitco, 1,055.00 Sqm 1,141.45 Rupees One Thousand

AGL Brand" or equivalent make in skrting risers of steps and dedo on 10mm thick One Hundred Forty One

cement plaster 1:3 (1-cement : 3-coarse sand) on new surface or fixing on existing and Paisa Forty Five Only

flooring by adhesive material including dismentaling of existing flooring and jointed with

color cement slurrycomplete. Shade & Size as per detailed drawing and as directed by

Engineer in charge.

79 Providing and laying Glazed Vitrified Full body 8 to10 mm thick "Johnson, Marbito, Nitco, 100.00 Sqm 1,404.64 Rupees One Thousand

AGL Brand" or equivalent make tile flooring over 20 mm (average) base of cement Four Hundred Four and

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Paisa Sixty Four Only

adhesive material including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the surface etc. as

directed complete, Shade & Size as per detailed drawing and as directed by Engineer

80 Providing and laying Glazed Vitrified Full body 8 to 10 mm thick "Johnson, Marbito, 6,068.00 Sqm 1,141.45 Rupees One Thousand

Nitco, AGL Brand" or equivalent make in skrting risers of steps and dedo on 10mm thick One Hundred Forty One

cement plaster 1:3 (1-cement : 3-coarse sand) on new surface or fixing on existing and Paisa Forty Five Only

flooring by adhesive material including dismentaling of existing flooring and jointed with

color cement slurry including finised with flush pointing & cleaning the surface etc.

complete, Shade & Size as per detailed drawing and as directed by Engineer in charge.

81 Providing and laying Antiskid full body Vitrified tiles 8 mm to 10 mm thick "Johnson, 2,170.00 Sqm 1,397.83 Rupees One Thousand

Marbito, Nitco, AGL Brand" or equivalent make in flooring, treads of steps and landing Three Hundred Ninety

laid on a bed of 20 mm thick cement mortar 1 : 6 (1 cement : 6 coarse sand) finished Seven and Paisa Eighty

with flush pointing in white /coloured cement slurry complete. Shade & Size as per Three Only

detailed drawing and as directed by Engineer in charge.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

82 Providing and fixing Granite and kota as Kitchen platform, pantry, Basin counter of width 204.00 Sqm 3,769.32 Rupees Three Thousand

0.60 to 0.70 m with 18mm thick granite of approved color in one piece for kitchen Seven Hundred Sixty Nine

platform ,pantry, Basin counter . The joint shall be filled with white cement with and Paisa Thirty Two Only

pigments to match the color of the stone. The cutouts for Kitchen sink/W.B. if required

shall be provided as per drawing. The platform shall be supported on pair of polished

kotah stone @ 0.75 to 0.90 m c/c filled with cement slurry. It shall include facia. The

facia and other edges shall be duly chamfered / rounded as per drawing. The stone

shall be of one shade only and different shades if found will be rejected, finished sizes

shall be measured & paid for.as directed complete as per detailed drawings & directed

83 Providing and laying Granite slab (18 mm thick) flooring over 20 mm (average) base of 1,895.00 Sqm 2,127.06 Rupees Two Thousand

cement mortar 1:6 (1cement : 6 coarse sand) or L.M 1:1.5 laid and jointed with grey One Hundred Twenty

cement slurry including rubbing and polishing, complete as per drawing & directed by Seven and Paisa Six Only

EIC/Architect. including making edge moulding as per pattern of Architectural Drawing

Stone finish Flamed/Polished/Bush Hammered/Brushed/Laputoro/ Shot Blasted /

Grooved/Sandblasted.

84 Providing and laying 18mm thick Granite of specified size colour, shade and of 4,270.00 Sqm 1,848.30 Rupees One Thousand

approved make, in skirting, risers of steps, dado, cladding , sill and jambs of door, Eight Hundred Forty Eight

window & ventilation frame with mini. two coat of construction chemical and as per and Paisa Thirty Only

manufacture specification incl. rubbing and polishing, rounding edge and All joints filled

with coloured cement putty as per architect detail and wiped to give sharp joints with

flush pointing and washed as direction by E.I.C.

Stone finish Flamed/Polished/Bush Hammered/Brushed/Laputoro/

Shot Blasted/Grooved/Sandblasted.

85 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base 5,512.00 Sqm 965.59 Rupees Nine Hundred

of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse Sixty Five and Paisa Fifty

sand) laid over and jointed with grey cement slurry mixed with pigment to match the Nine Only

shade of slab including rubbing, moulding and polishing etc. complete. (A) 25 mm thick

86 Providing and laying polished kota stone slab 25 mm thick in risers of steps, dado and 402.00 Sqm 1,089.67 Rupees One Thousand

pllars laid on 10 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed Eighty Nine and Paisa Sixty

with gray cement slurry including rubbing & polishing etc. complete. Seven Only

87 Making 3 nos. of anti skid grooves 3mm x 3mm deep on top of staircase tread at 2,774.00 Rmt 91.91 Rupees Ninety One and

front as shown in the drawing. (Measurement will be done in Rmt for a set of 3 no Paisa Ninety One Only

grooves together)

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

88 Providing and laying chequered precast cement concrete tiles 22mm thick with 734.00 Sqm 528.01 Rupees Five Hundred

aggegate of sizes upto 6mm in floors, treads of steps and landings on 20mm thick bed Twenty Eight and Paisa

of C.M. 1:6 (1-cement : 6-sand) or L.M. 1:1.5(1-Lime putty : 1.5 coarse sand) joint with One Only

neat cement slurry with pigments to match the shade of the tiles etc,complete as per

direction of Engineer-in-charge.

89 Providing and fixing Double side polished Granite Stone 18 mm thick with machine cut 73.00 Sqm 3,108.78 Rupees Three Thousand

edge to all sides as a platform, shelves, divider wall etc. including making groove in One Hundred Eight and

wall and making the same as per original including fixing the same with C:M 1:3 ( 1 Paisa Seventy Eight Only

cement : 3 sand ) in true line and level, curing including rubbing, rounding edg and

polishing etc.complete as per detailed drawings & directed by E.I.C.

90 Mirror polishing on marble work/Granite work/stone work/Kota stone where ever 5,635.00 Sqm 217.35 Rupees Two Hundred

required to give high gloss finish complete. Seventeen and Paisa

Thirty Five Only

91 Providing and laying concrete floor by Vacuum Dewatering System for concrete road 1,129.00 Cum 5,288.36 Rupees Five Thousand

popularly known as Tremix Flooring. The concrete having proportion of M-25 of Two Hundred Eighty Eight

aggregate size 6 mm to 20 mm shall be laid over the surface which have been and Paisa Thirty Six Only

perfectly prepared, lined & levelled with compactor machine. The concrete shall be

spread and vibrated with a pocker vibrator, then levelled with double beam screeder

for precision levelling of the concrete surface. The excess water shall be removed by

vacuume dewatering and through honey comb filter cloth placed on the concrete

surface & sealed around the edges with a covering of top mat of required size. The

excess water shall be drawn out through a suction pipe. The surface then would be

trowelled with power troweller/ power floter with a smoothing disc for extremely hard &

impermeable surface, including necessary groovings etc at regular interval, for the

purpose of providing expansion joint as specified, and filling the joints with bitumen of

approvrd grade and adding 'polyster fibre of tri angular cross section having tensile

strength of 4000 to 6000 kg/cm2 like Recorn 3S or equi @ 909 gm per cum and

preparing brush The flooring shall be cured for min. 7 days. In this process the

specification by the Manufacturer/ Technology supplier would be followed.

92 Grouting the joints of flooring tiles having joints of 3 to 5 mm width, using epoxy grout mix 15,208.00 Sqm 151.50 Rupees One Hundred Fifty

of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of One and Paisa Fifty Only

resin per kg), including filling /grouting and finishing complete as per detailed drawings

& directed by E.I.C.For All Size Tiles

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

93 Providing and laying water proofing treatment on terrace with china mosaic floor 2,153.00 Sqm 1,003.94 Rupees One Thousand

ingincluding applying neat cement slurry 2.75kg/cm2 on cement admixed with water Three and Paisa Ninety

proofing component after cleaning the surface /laying cement concrete with brick bat Four Only

75 mm to 100 mm thick with 50% of C.M. 1:5 to required slope including ramming at

junction of wall and slab after two days of proper curing applying broken china mosaic

flooring for plain and curve surface 12mm to 20mm white colour broken piece of

glazed tiles to be laid over 12mm thick cement mortar bedding of CM (1:3) to plain

and slop and to be tampered to bring mortar cream up to surface with using white

cement and incl. Rounding of junctions and extending them up to 30 cm along the

wall and curing with bends any patterns or design as per drawing and direction incl.

94 Providing composite water proofing treatment to floor and walls of water tank, w.c. & 1,928.00 Sqm 265.63 Rupees Two Hundred Sixty

bath area, through approved agencies preparing floor and wall for water proofing Five and Paisa Sixty Three

work/ by chasing/cutting as per the companies requirement. First by providing and Only

applying cementitious crystalline based waterproofing for concrete rafts, walls, water

tanks, slabs, concrete floors etc. with Epoxy coating. The application to be done from

positive side on a wet open pore concrete surface with brush @ to 1 kg/ sqm as per

mfg.'s specification. After testing with ponding after 7 days, a layer of plaster with

waterproofing compound/ admixture about 25 mm thick in the floor / depression and

about 18 mm on the sidewalls / depression upto the floor level shall be provided over

the surface treated with crystalline powder. The waterproof plaster about 18 mm thick

to be continued on the walls above the floor level for a height of 600 mm with surface

suitable to receive further finishing treatment all complete as per companies

specifications and instructions and as directed for all heights and floors. The round vata

shall be included in this in sq.mt. and shall be taken upto top of round on wall.

95 Indepth Crystalline Treatment- Surface Preparation: 1,069.42 Sqm 707.00 Rupees Seven Hundred

Minor cleaning work, scarifying the surface to remove laitance, cleaning with Seven and Zero Paisa

compressed air, chasing open construcituon joints & cracks etc. to form a U shaped Only

groove of 20mm x 20mm and filling with polymer modified mortar using polymer in the

ratio of 1pbw polymer:10 pbw cement: 30 pbw quartz sand. Making of angle fillets all

around the periphery of the wall with polymer modified mortar in the ratio of in the ratio

of 1pbw polymer:10 pbw cement: 30 pbw quartz sand. Providing and applying, in

depth penetrating type crystalline waterproofing system, applied as a slurry application

by brush in two coats with a total consumption of approx.1.50 Kg per Sqm, to be

applied over the RCC slab & on vertical surfaces, curing for minimum 3 days

etc.complete in all aspects as per manufacturers instructions and as directed by

Engineer/Architect. The area of the floor and sides of tank treated shall be considered

for payment purpose.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

96 Providing and laying integral cement based treatment for water proofing on horizontal 2,789.00 Sqm 1,209.30 Rupees One Thousand

surface at all depth below ground level for under ground structures as directed by Two Hundred Nine and

Engineer-in-Charge and consisting of : Paisa Thirty Only

(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a

mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water

proofing compound conforming to IS:2645 in the recommended proportion over the

leveling course (leveling course to be paid separately). Joints sealed and grouted with

cement slurry mixed with water proofing compound.

(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with

water proofing compound in recommended proportions.

(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @

cudm/sqm thoroughly embedded in the 2nd layer.

Using rough kota stone.

97 Pressure Release Pipe Treatment 184.00 Nos. 1,010.00 Rupees One Thousand

Providing and Fixing 50 mm dia G.I. “B” class pressure release pipes embedded with Ten and Zero Paisa Only

PCC layer and extended above the raft slab upto 150 mm above F.F.L. including

sealing of the base Junction between the pipe and the waterproofing membrane with

liquid Applied PU flashing of Dr. Fixit Flexi PU 270 or equivalent make with reinforcing

polyester mesh embedded between the two coats of Dr.Fixit Flexi PU 270 including

grouting the pipes with cement slurry grout admixed with Pidicrete AM @ 225 GM per

bag of cement as indicated in the drawing / recommendation.

98 Providing and filling with scrap of AAC block (good quality) as a cinder as directed by 331.00 Cum 1,477.63 Rupees One Thousand

engineer in charge in sunks in layers of 15 cm thk including watering placing ramming Four Hundred Seventy

well etc. as directed. Seven and Paisa Sixty

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

99 Providing and fixing false ceiling at all height including providing and fixing of frame 110.00 Sqm 1,081.79 Rupees One Thousand

work made of special sections, power pressed from M.S. sheets and galvanized with Eighty One and Paisa

zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle Seventy Nine Only

cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm

long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50

mm of required length with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm

and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including

fixing of gypsum board to ceiling section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011

(Board with BIS certification marks)

100 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) 150.00 Sqm 1,521.87 Rupees One Thousand

false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having Five Hundred Twenty One

moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS and Paisa Eighty Seven

8225:1987, Non combustible as per BS 476 (part 4)- 1970 and light reflectance of 85% Only

(minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of

hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm

including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm,

cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size

15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from

ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm

long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod

upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron

perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery

wall / partition with the help of plastic rawl plugs at 450 mm center to center and

mm long dry wall wood screws. The work shall be carried out as per specifications,

drawing and as per directions of the Engineer-in-Charge.

With fully perforated/ without perforation plain12 mm thick micro tegular edged or

mm thick square edged GRG false ceiling tiles.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

101 Providing and fixing false ceiling at all heights with integral densified calcium silicate 226.02 Sqm 1,836.05 Rupees One Thousand

reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved Eight Hundred Thirty Six

texture, design and patterns as per CPWD Specification 2019, to be laid in true and Paisa Five Only

horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron

section of 0.33mmthick (galvanized @ 120 grams per sqm including both

sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size

24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of

length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling using

galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash

fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level

adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick

with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash

fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm

of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl

plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be

carried out as per specifications, drawing and as per directionsof the Engineer-in-

With 15 mm thick tegular/butt edged without perforation plain/designer light weight

calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801

102 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) 22.00 Sqm 2,801.03 Rupees Two Thousand

unitized system of structural glazing (with open joints) for linear as well as curvilinear Eight Hundred One and

portions of the building for all heights and all levels, including: (a) Structural analysis & Paisa Three Only

design and preparation of shop drawings for the specified design loads conforming to IS

875 part III (the system must passed the proof test at 1.5 times design wind pressure

without any failure), including functional design of the aluminum sections for fixing

glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc.

gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone

sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets

for water tightness, pressure equalisation & drainage and protection against fire hazard

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 -

T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional

movement for achieving perfect verticality and fixing structural glazing system rigidly to

the RCC/ masonry/structural steel framework of building structure using stainless steel

anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and

washers etc. of stainless steel grade 316, of the required capacity and in required

(c) Providing and filling, two part pump filled, structural silicone sealant and one part

weather silicone sealant compatible with the structural silicone sealant of required bite

size in a clean and controlled factory / work shop environment, including double sided

spacer tape, setting blocks and backer rod, all of approved grade, brand and

manufacture, as per the approved sealant design, within and all around the perimeter

for holding glass.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of -

sizes, shapes and profiles, as required as per the site conditions, to seal the gap

between the building structure and all its interfaces with curtain glazing to make it

(e) Making provision for drainage of moisture/ water that enters the curtain glazing

system to make it watertight, by incorporating principles of pressure equalization,

providing suitable gutter profiles at bottom (if required), making necessary holes of

required sizes and of required numbers etc. complete. This item includes cost of all

inputs of designing, labour for fabricating and installation of aluminium grid, installation

of glazed units, T&P, scaffolding and other incidental charges including wastages etc.,

enabling temporary structures and services, cranes or cradles etc. as described above

and as specified. The item includes the cost of getting all the structural and functional

design including shop drawings checked by a structural designer, dully approved by

Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all

samples of the individual components for testing in an approved laboratory, field tests

on the assembled working structural glazing as specified, cleaning and protection till

the handing over of the building for occupation. In the end, the Contractor shall

provide a water tight structural glazing having all the performance characteristics etc.

all complete as required, as per the Architectural drawings, as per item description, as

specified, as per the approved shop drawings and as directed by the Engineer- in-

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded -

aluminium section capping for fixing in the grooves of the curtain glazing and vermin

proof stainless steel wire mesh shall be paid for separately under relevant items under

this sub- head. However, for the purpose of payment, only the actual area of structural

glazing (including width of grooves) on the external face shall be measured in sqm. up

to two decimal places.

Note:-2. The following performance test are to be conducted on structural glazing

system if area of structural glazing exceeds 2500 Sqm from the certified laboratories

accreditated by NABL(National Accreditation Board for Testing and Calibration

Laboratories), Department of Science & Technologies, India. Cost of testing is payable

separately. The NIT

approving authority will decide the necessity of testing on the basis of cost of the work,

cost of the test and importance of the work. Performance Testing of Structural glazing

system Tests to be conducted in the NABL accredited lab or any other accreditation

body which operates in accordance with ISO/IEC 17011 and accredits labs as per

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to -

+300pa) as per ASTME-283-04 testing method for a range of testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method

for a range upto 2000 ml.

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method

for a range upto2000 ml

4. Structural Performance Deflection and deformation by static air pressure test (1.5

times design wind pressure without any failure) as per ASTME-330-10 testing method for a

range upto 50 mm

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for

Qualitative test, Tests to be conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto

103 Dry Wall Partition 114.00 Sqm 2,100.80 Rupees Two Thousand

The scope includes supply and erection /installation of the item on site. for details and One Hundred and Paisa

assembly work refer drawings, Gypsum board with Galvanized Iron frame laminate to Eighty Only

be approved by client / consultants. The rate includes cost of all labour, material and

with necessary tools, tackles, adhesive, screws etc. The rate also includes for all

necessary items required to complete the job as per design /drawing and client /

consultant's instructions.

104 Carring out plinth treatment to post construction / existing structure by spraying 2,547.00 Sqm 57.27 Rupees Fifty Seven and

chemical solution for termite control treatment including labour and material Paisa Twenty Seven Only

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended

105 Providing and laying and fixing 50 mm thick expansion joint by hydro cell semi rigid UV 657.00 Sqm 1,491.03 Rupees One Thousand

resistance with high performance laminated closed cell polythene foam joint filler in Four Hundred Ninety One

sheet foam as directed, etc. complete. and Paisa Three Only

106 Applying and providing Expansion joint sealing System on 200 mm vide joint including 238.00 Sqm 4,772.00 Rupees Four Thousand

cleaning of exansion joint by mechanical means provision of adhesive and flexible Seven Hundred Seventy

membrane with required bond length as per menufracturer specification and 4mm Two and Zero Paisa Only

thick alluminium strip covering with one side sloted and bolted with suitable system,

inclusive of all manpower, machinery and material as per specification and as

107 Providing and fixing in position collapsible steel shutters with vertival channels 20 mm x 21.00 Quintal 5,785.56 Rupees Five Thousand

10 mm x 2 mm braced with flat iron diagonals 20 mm x 5 mm size with top & bottom Seven Hundred Eighty Five

rails of T iron 40 mm x 40 mm x 6 mm with 38 mm diameter steel pulleys complete with and Paisa Fifty Six Only

bolts, nuts, locking arrangements, stopper handles including applying a priming coat of

red lead paint.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

108 Providing & Fixing anchor fasteners including drilling in RCC / Masonary Members, 50.00 No, 262.60 Rupees Two Hundred Sixty

fastening with structural steel members etc complete. Two and Paisa Sixty Only

109 Providing & Fixing anchor fasteners . including drilling in RCC / Masonary Members, 52.00 No, 371.68 Rupees Three Hundred

fastening with structural steel members etc complete. Seventy One and Paisa

c)12mm dia. Sixty Eight Only

110 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under 60.00 No, 244.42 Rupees Two Hundred

relevant item of work ) after drilling the hole of required diameter & depth ,cleanning Forty Four and Paisa Forty

of the same ,providing /filling the hole with Injection Mortar inserting reinforcement bar Two Only

etc. complete as per Manufacturers & architects instruction.The work shall be carried

out by the technical workmens/agency approved by the manufacturer and under

technical supervision of Manufacturer of Injection grout including all materials,tool

tackles ,labour etc.complete.

(a) 8 mm. dia.bar -Holes 12mm dia Depth 100mm

111 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under 92.00 No, 417.13 Rupees Four Hundred

relevant item of work ) after drilling the hole of required diameter & depth ,cleanning Seventeen and Paisa

of the same ,providing /filling the hole with Injection Mortar (HY 150 or approved Thirteen Only

equivalant),inserting reinforcement bar etc. complete as per Manufacturers &

architects instruction.The work shall be carried out by the technical workmens/agency

approved by the manufacturer and under technical supervision of Manufacturer of

Injection grout including all materials,tool tackles, labour etc.complete.

(B) 10 mm. dia.bar -Holes 14mm dia Depth 200mm

112 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under 50.00 No, 656.50 Rupees Six Hundred Fifty

relevant item of work ) after drilling the hole of required diameter & depth ,cleanning Six and Paisa Fifty Only

of the same ,providing /filling the hole with Injection Mortar (HY 150 or approved

equivalant),inserting reinforcement bar etc. complete as per Manufacturers &

architects instruction.The work shall be carried out by the technical workmens/agency

approved by the manufacturer and under technical supervision of Manufacturer of

Injection grout including all materials,tool tackles, labour etc.complete.

(C) 12 mm. dia.bar -Holes 16mm dia Depth 240mm

113 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under 65.00 No, 1,372.59 Rupees One Thousand

relevant item of work ) after drilling the hole of required diameter & depth ,cleanning Three Hundred Seventy

of the same ,providing /filling the hole with Injection Mortar (HY 150 or approved Two and Paisa Fifty Nine

equivalant),inserting reinforcement bar etc. complete as per Manufacturers & Only

architects instruction.The work shall be carried out by the technical workmens/agency

approved by the manufacturer and under technical supervision of Manufacturer of

Injection grout including all materials,tool tackles, labour etc.complete.

(D) 16 mm. dia.bar -Holes 20mm dia Depth 320mm

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

114 Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra under 65.00 No, 2,478.54 Rupees Two Thousand

relevant item of work ) after drilling the hole of required diameter & depth ,cleanning Four Hundred Seventy

of the same ,providing /filling the hole with Injection Mortar (HY 150 or approved Eight and Paisa Fifty Four

equivalant),inserting reinforcement bar etc. complete as per Manufacturers & Only

architects instruction.The work shall be carried out by the technical workmens/agency

approved by the manufacturer and under technical supervision of Manufacturer of

Injection grout including all materials,tool tackles, labour etc.complete.

(E) 20 mm. dia.bar -Holes 24mm dia Depth 400mm

115 Providing and wet drilling accurate and clean holes of 37-300 mm range without 10.00 No, 868.60 Rupees Eight Hundred

vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling system using Sixty Eight and Paisa Sixty

diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio for core cutting using Only

HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control panel

indicator to display proper pressure application, capable of drilling at angle from

0degree- 45degree and do overhead application. The rate shall also include for

providing scaffolding, labour and approved tools & machineries.

116 Providing and wet drilling accurate and clean holes of 37-300 mm range without 30.00 No, 977.68 Rupees Nine Hundred

vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling system using Seventy Seven and Paisa

diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio for core cutting using Sixty Eight Only

HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control panel

indicator to display proper pressure application, capable of drilling at angle from

0degree- 45degree and do overhead application. The rate shall also include for

providing scaffolding, labour and approved tools & machineries.

117 Providing and wet drilling accurate and clean holes of 37-300 mm range without 10.00 No, 1,042.32 Rupees One Thousand

vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling system using Forty Two and Paisa Thirty

diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio for core cutting using Two Only

HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control panel

indicator to display proper pressure application, capable of drilling at angle from

0degree- 45degree and do overhead application. The rate shall also include for

providing scaffolding, labour and approved tools & machineries.

118 Providing and wet drilling accurate and clean holes of 37-300 mm range without 10.00 No, 1,194.83 Rupees One Thousand

vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling system using One Hundred Ninety Four

diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio for core cutting using and Paisa Eighty Three

HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control panel Only

indicator to display proper pressure application, capable of drilling at angle from

0degree- 45degree and do overhead application. The rate shall also include for

providing scaffolding, labour and approved tools & machineries.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

119 Providing and wet drilling accurate and clean holes of 37-300 mm range without 10.00 No, 1,302.90 Rupees One Thousand

vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling system using Three Hundred Two and

diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio for core cutting using Paisa Ninety Only

HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control panel

indicator to display proper pressure application, capable of drilling at angle from

0degree- 45degree and do overhead application. The rate shall also include for

providing scaffolding, labour and approved tools & machineries.

120 Providing and wet drilling accurate and clean holes of 37-300 mm range without 10.00 No, 1,737.20 Rupees One Thousand

vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling system using Seven Hundred Thirty

diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio for core cutting using Seven and Paisa Twenty

HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control panel Only

indicator to display proper pressure application, capable of drilling at angle from

0degree- 45degree and do overhead application. The rate shall also include for

providing scaffolding, labour and approved tools & machineries.

121 Providing and wet drilling accurate and clean holes of 37-300 mm range without 10.00 No, 2,497.73 Rupees Two Thousand

vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling system using Four Hundred Ninety

diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio for core cutting using Seven and Paisa Seventy

HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control panel Three Only

indicator to display proper pressure application, capable of drilling at angle from

0degree- 45degree and do overhead application. The rate shall also include for

providing scaffolding, labour and approved tools & machineries.

122 Providing and wet drilling accurate and clean holes of 37-300 mm range without 10.00 No, 3,258.26 Rupees Three Thousand

vibration through Hilti P-U ABRASIVE CORE BIT and Rig-based drilling system using Two Hundred Fifty Eight

diamond drilling machine DD200 having 1:1 & 1:3 gearing ratio for core cutting using and Paisa Twenty Six Only

HILTI machine in RCC beams/ Walls/ Columns etc. for laying pipes., control panel

indicator to display proper pressure application, capable of drilling at angle from

0degree- 45degree and do overhead application. The rate shall also include for

providing scaffolding, labour and approved tools & machineries.

123 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L 401.00 sqm 727.13 Rupees Seven Hundred

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet Twenty Seven and Paisa

washer. filled with white lead complete excluding the cost of purlins, Rafters and Thirteen Only

Trusses.(1) 0.80 mm thick sheet.

124 Providing ridges or hips 600 mm overall in plain G.I. sheet class-3 fixed with G.I.J. or L 187.00 sqm 641.94 Rupees Six Hundred Forty

Hooks and nuts 8mm dia G.I. Limpet and bitumen washer complete. (1) 0.80 mm thick One and Paisa Ninety Four

125 Providing and fixing in position Stainless steel Grade 304 plate-3.0 mm thick as per 1,034.00 Rmt 1,371.99 Rupees One Thousand

design for Wall Guard, expansion joints etc complete as directed by Engineer in charge. Three Hundred Seventy

300 mm wide. One and Paisa Ninety

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

126 Providing and fixing in position Stainless steel Grade 304 plate-3.0 mm thick as per 3,270.00 Kg 90.48 Rupees Ninety and Paisa

design for Wall Guard, expansion joints etc complete as directed by Engineer in charge. Forty Eight Only

127 Steel work welded, in built up sections, framed work including cutting, hoisting, fixing in 19,595.00 Kg 90.48 Rupees Ninety and Paisa

position and applying a priming coat of red lead paint & Painting two coats oil paint. Forty Eight Only

(A) In beams and joists, channels, angles, tees, flats with connecting plates or angle

cleats as in main & cross beamnship & jack rafters, purlins connected to common

rafters and like.

128 Building Signage : 75.00 sqm 93.83 Rupees Ninety Three and

Designing,Supply, Installation, Testing and commissioning of S.S. Background board of Paisa Eighty Three Only

required thickness, smooth matt finish, illuminated with yellow and blue led and face

glow letters above it. The frame shall be offset from the glazing and shall be supported

by the floor beams on Terrace and Terrace Floor. The peripheral gap space between

front side and the backing shall also be covered with acrylic sheets, having a width of

500 to 700 mm. Rate to include cost of steel framework, Aluminium framework and

inclusive of two coats of primer and anti-corrosive paint. Contractor shall prepare the

detailed shop drawings for the item and same shall be approved before execution.

Complete for all height, levels, floors in all shapes as per the Architectural drawings and

directions of engineer-in-charge.

129 Interior Signage- Laser Cut Sign Board : 41.00 sqm 14,127.88 Rupees Fourteen

Designing,Providing & fixing approved stainless steel laser cut display signage panel/ Thousand One Hundred

board on building at all levels and heights in form of letters/ numbers/ symbol/ logo, for Twenty Seven and Paisa

Address/Information/designation of person/officer as per details. The Signage letters Eighty Eight Only

language shall be in Gujarati/Hindi/English and of any sizes, color and width / height/

length. The plate shall be atleast 50mm extra on all sides of the letters for large size

signages and Min. 25mm for all Small size signages to be placed within the building,

including cutting, finishing, fixtures and fittings.

130 Providing and fixing of Safety Net of 3 Layer Yellow, 12 mm Border (4 mm Mesh Size 1,459.00 sqm 101.00 Rupees One Hundred

120/120 knotted 100% GSM Monofilant Shade Net) eith installation for preventing One and Zero Paisa Only

collapse of soil for construction of basement 7 mtr depth and preventing any ancident

as per instruction of EIC. along with black LDPE Sheet for protection during rain.

131 Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with 4,816.00 Kg 151.50 Rupees One Hundred Fifty

frame of Various sizes,weight and types and load bearing capacity as per EN-124, One and Paisa Fifty Only

equivalent NECO with prior approval of concerned Superitending Engineer.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

132 Speed Breaker : 57.00 Rmt 3,762.25 Rupees Three Thousand

Providing and fixing Speed breakers / bumpers having capacity 50 tons for the Seven Hundred Sixty Two

driveways and ramps. Black and Yellow color high intensity PVC speed bumps marked and Paisa Twenty Five

with reflective tapes, having section of size L750 MM x 250MM x75 MM shall be fixed as Only

per length 4 nos (2 black, 2 yellow) and design with anti skid pattern for grip filling

cement inside. The speed breakers shall be installed at adequate spacing, with the

help of mounting hardware, pre-drilled holes, butyl tapes, spike bolts, etc., inclusive of

all labours and materials.The Work shall be carried out as per manufacturer's

instructions , detailed drawings and Architect/EIC instructions.

133 Car Stopper : 40.00 No. 681.75 Rupees Six Hundred Eighty

Supplying and fixing PVC Car Stopper of black with yellow reflective sheeting at parking One and Paisa Seventy

areas having size of (L)500mm x (H)160mm x (W)150mm, fixed with stainless steel Five Only

flathead fastener flush and plastic cement adhesive according to manufacturer

instructions, detailed drawingand Architect/EIC instructions.

134 CONVEX MIRROR : 6.00 No. 4,231.90 Rupees Four Thousand

Supplying, Installating, Testing & Commissioning of Convex Mirror having size 32" (800 Two Hundred Thirty One

mm) fixed on pole or wall. ABS Plastic and Mirror with back frame made of Unbreakable and Paisa Ninety Only

Polycarbonate etc, as per manufacturer's instructions , detailed drawings and

Architect/EIC instructions.

135 Supplying, Installating, Testing & Commissioning of Queue manager with Height of the 12.00 No. 1,414.00 Rupees One Thousand

Post 950 mm (Approx.). Material & Finish Mild Steel - Epoxy Powder Coated. Base Mild Four Hundred Fourteen

Steel having 300 mm diametre. Weight of the Post 9-10 Kgs Approx. Belt width 48 mm and Zero Paisa Only

and Length 8.5 feet or 2.0 Meters (Approx.) Belts Polyester with Custom Color, Screen &

Digital Print options will be indicated on final stage. Connectivity 3 Receiving &

Extension end for 4 way connectivity.

136 Providing and fixing Parking Signage of Reflective Media and ACP sheet panelling with 9.02 Sqm 227.25 Rupees Two Hundred

specified size as per manufacturer's instructions , detailed drawings and Architect/ EIC Twenty Seven and Paisa

instructions. Twenty Five Only

137 CORNER GUARD : 72.55 Rmt 2,525.00 Rupees Two Thousand

The system fixed to brick/RCC wall at the corner from finished floor level. Adjustable end Five Hundred Twenty Five

cap. High impact vinyl acrylic snap-on matt finished. The corner guard must be 50 mm x and Zero Paisa Only

50 mm , as specified by the client in size with aluminum retainer and rigid vinyl, must

have 1.5 mm thick aluminum retainer, must have 2 mm thick scratch and stain

resistance rigid vinyl cover, should be coated with antifungal and antibacterial

chemical. the system shall be designed to withstand impact. making it ideal for areas

like high traffic corridors and corners. the vinyl cover should be fire retardant according

to the norms and should have test certificates of that. it must be according to ROHS

compliances. The material should come the ROHS certification from govt approved

lab. texture to provide an anti-slip surface , it should have adjustable end cap

.aluminum retainer should be in mill finish and fabricated from 6063-T5 alloy etc

complete, As per drawings and design supplied by architect and instruction given by

authority and E.I.C.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

138 WALL GUARD : 30.00 Rmt 4,848.00 Rupees Four Thousand

The system fixed to brick /RCC wall at 300mm high from finished floor level comprising Eight Hundred Forty Eight

continuous aluminum rail retainer, 2 impact absorbing strip, end cap and high impact and Zero Paisa Only

vinyl acrylic snap-on textured surface cover. The wall guard must be 152mm wide, as

specified by the client , must have 1.5 mm thick aluminum retainer, must have 2 mm

thick scratch and stain resistance rigid vinyl cover, should be coated with antifungal

and antibacterial chemical. the system shall be designed to withstand impact and

provides a cushioned surface with its integrated rubberized absorber, making it ideal for

areas like high traffic corridors, loading bays and light cargo lifts. the vinyl cover should

be fire retardant according to the norms and should have test certificates of that. it

must be according to ROHS compliances. The material should come the ROHS

certification from govt approved lab. texture to provide an anti-slip surface , it should

have adjustable end cap , corner joint and adaptor plate .aluminum retainer should be

in mill finish and fabricated from 6063-T5 alloy .

139 Road marking with hot applied thermoplastic paints with reflectorising glass beads on 82.00 Sqm 367.72 Rupees Three Hundred

bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm Sixty Seven and Paisa

thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is Seventy Two Only

excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and holes. zebra patta /bump patta lane/center

line/ edge line/cut patta. The white color marking should provide liminance coefficinet

on cemend road shalll be min 130mcd/m2/lux and Asphalt road shall be min 100 mcd

/m2/ lux during the service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be

140 Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction 80.00 No. 375.72 Rupees Three Hundred

high compressed molding with reflector made of MMC (prismatic type of size 12cm x Seventy Five and Paisa

6cm x 2.5cm) provided with bituminous adhesive 100g. with each unit for fixing. (High Seventy Two Only

Intensity grade).

141 PLUMBING SYSTEM 1,056.00 Rmt. 72.65 Rupees Seventy Two and

WATER SUPPLY (INTERNAL) Paisa Sixty Five Only

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

142 20mm dia. U.P.V.C. 3,624.00 Rmt. 81.93 Rupees Eighty One and

Paisa Ninety Three Only

143 25mm dia. U.P.V.C. 486.00 Rmt. 91.84 Rupees Ninety One and

Paisa Eighty Four Only

144 32mm dia. U.P.V.C. 300.00 Rmt. 119.15 Rupees One Hundred

Nineteen and Paisa

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

145 40mm dia. U.P.V.C. 468.00 Rmt. 148.12 Rupees One Hundred

Forty Eight and Paisa

146 50mm dia. U.P.V.C. 1,364.00 Rmt. 195.67 Rupees One Hundred

Ninety Five and Paisa Sixty

147 63mm dia. U.P.V.C. 399.00 Rmt. 311.71 Rupees Three Hundred

Eleven and Paisa Seventy

148 75mm dia. U.P.V.C. 186.00 Rmt. 414.57 Rupees Four Hundred

Fourteen and Paisa Fifty

149 90mm dia. U.P.V.C. 69.00 Rmt. 563.82 Rupees Five Hundred Sixty

Three and Paisa Eighty

150 100mm dia. U.P.V.C. 350.00 Rmt. 800.63 Rupees Eight Hundred

and Paisa Sixty Three Only

151 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B 78.83 Rmt. 836.73 Rupees Eight Hundred

pipe conforming to IS 13592-1992 with one end plain and other end socketed with Thirty Six and Paisa

rubbering, & fitting conforming to ISI 14735-1999 of approved make for drainage system Seventy Three Only

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm

high at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pies and joints

and jointed with adhesive solvent cement including cost of all materials

152 Providing, Installing, tesitng and commissioning CPVC (Chlorinated Poly Vinyl Chloride) 1,082.00 Metre 166.86 Rupees One Hundred

water supply pipes (ASTM F 441) with pipe fittings (ASTM D 1784)as per SDR 11 at Sixty Six and Paisa Eighty

working pressure of 400 PSI at 23. Deg.C & 100 PSI at 82 Deg.C. using solvent welded Six Only

CPVC fitings I.e Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including

transition fittings connection between CPVC & metal pipe/G.I i.e Brass Adaptors (Both

male & Female threaded) (All termination points for installation shall have brass

termination fittings) conforming to ASTM D-2846 with only CPVC solvent cement

conforming to ASTM F-493 along with C clamps with anchor fasteners/structural steel

supports as required/directed at site including cutting chase and making good the

same with cement concrete/cement mortar as per drawings, specification and as

directed by the Project Manager.

153 20 mm dia 58.00 Metre 205.00 Rupees Two Hundred Five

and Zero Paisa Only

154 25 mm dia 1,117.00 Metre 249.72 Rupees Two Hundred

Forty Nine and Paisa

Seventy Two Only

155 32mm dia 737.00 Metre 333.66 Rupees Three Hundred

Thirty Three and Paisa Sixty

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

156 40mm dia 792.00 Metre 442.04 Rupees Four Hundred

Forty Two and Paisa Four

157 50mm dia 792.00 Metre 653.77 Rupees Six Hundred Fifty

Three and Paisa Seventy

158 Supply,Installing, tesitng and commissioning cpvc ball valve working pressure of 10 80.00 Nos 324.63 Rupees Three Hundred

kg/cm2 etc. including providing of connectors, flanges, nuts, bolts, gaskets, etc as per Twenty Four and Paisa

drawings, specification and as directed by the Project Manager. Sixty Three Only

159 Supply,Installing, tesitng and commissioning cpvc ball valve working pressure of 10 65.00 Nos 369.03 Rupees Three Hundred

kg/cm2 etc. including providing of connectors, flanges, nuts, bolts, gaskets, etc as per Sixty Nine and Paisa Three

drawings, specification and as directed by the Project Manager. Only

160 Supply,Installing, tesitng and commissioning cpvc ball valve working pressure of 10 70.00 Nos 370.27 Rupees Three Hundred

kg/cm2 etc. including providing of connectors, flanges, nuts, bolts, gaskets, etc as per Seventy and Paisa Twenty

drawings, specification and as directed by the Project Manager. Seven Only

161 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, 30.00 Nos 5,459.05 Rupees Five Thousand

rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid Four Hundred Fifty Nine

separately) : and Paisa Five Only

40 mm Dia Air Valve

162 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, 17.00 Nos 4,586.97 Rupees Four Thousand

rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid Five Hundred Eighty Six

separately) : and Paisa Ninety Seven

50 mm Dia Air Valve Only

163 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, 10.00 Nos 5,786.29 Rupees Five Thousand

rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid Seven Hundred Eighty Six

separately) : and Paisa Twenty Nine

60 mm Dia Air Valve Only

164 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, 26.00 Nos 6,186.25 Rupees Six Thousand One

rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid Hundred Eighty Six and

separately) : Paisa Twenty Five Only

63 mm Dia Air Valve

165 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, 18.00 Nos 6,860.93 Rupees Six Thousand Eight

rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid Hundred Sixty and Paisa

separately) : Ninety Three Only

75 mm Dia Air Valve

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

166 Providing and Supplyng gun metal non return valve as per drawings, specification and 5.00 Nos 1,459.60 Rupees One Thousand

as directed by the Project Manager. Four Hundred Fifty Nine

50 mm Dia. and Paisa Sixty Only

167 Providing and Supplyng gun metal non return valve as per drawings, specification and 15.00 Nos 1,828.43 Rupees One Thousand

as directed by the Project Manager. Eight Hundred Twenty

63mm Dia. Eight and Paisa Forty Three

168 Providing and Supplyng gun metal non return valve as per drawings, specification and 15.00 Nos 2,651.25 Rupees Two Thousand Six

as directed by the Project Manager. Hundred Fifty One and

75 mm Dia. Paisa Twenty Five Only

169 Supply,Installing, tesitng and commissioning cpvc ball valve working pressure of 10 85.00 Nos 663.43 Rupees Six Hundred Sixty

kg/cm2 etc. including providing of connectors, flanges, nuts, bolts, gaskets, etc as per Three and Paisa Forty

drawings, specification and as directed by the Project Manager. Three Only

40 mm Dia Check Valve

170 Supply,Installing, tesitng and commissioning concealed forged brass lever operated 100.00 Nos 659.15 Rupees Six Hundred Fifty

ball valve of full flow with forged brass ball (Machined to mirror smooth finish with hard Nine and Paisa Fifteen

chrome plated) and spindle with setting and gland of superior quality having minimum Only

working pressure of 16 kg/cm2 etc. including providing of connectors, flanges, nuts,

bolts, gaskets, etc as per drawings, specification and as directed by the Project

171 Providing and supplying C. I. Air valves of approved make & quality of following class 2.00 Nos 2,033.13 Rupees Two Thousand

and diameter including cl laxes, insurance, transportation, freight charges, octrol, Thirty Three and Paisa

inspection charges, loading, unloading, conveyance to departmental stores, stacking Thirteen Only

172 Providing and supplying ISI mark CI D/F Reflux Valves as per IS:5312 (Latest Edition) of 8.00 Nos 3,869.31 Rupees Three Thousand

following class and diameter including all taxes, insurance, transportation, freight Eight Hundred Sixty Nine

charges, octroi, inspection charges, loading, unloading, conveyance to departmental and Paisa Thirty One Only

stores, stacking etc. complete.63mm Dia

173 Pressure Reducing Valve 63 mm 4.00 Nos 12,781.55 Rupees Twelve Thousand

Seven Hundred Eighty

One and Paisa Fifty Five

174 Pressure Reducing Valve 75 mm 4.00 Nos 17,510.72 Rupees Seventeen

Thousand Five Hundred

Ten and Paisa Seventy

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

175 Pressure Reducing Valve50 mm 4.00 Nos 7,575.00 Rupees Seven Thousand

Five Hundred Seventy Five

and Zero Paisa Only

176 Strainer: 2.00 Nos 10,275.74 Rupees Ten Thousand

Design, Supply, Installation, Testing, Commissioning of External Striner for Woltman type Two Hundred Seventy Five

Bulk Water Meter, Body: IS:210 FG200 , Strainer Frame : SS Perforated Sheet, SS 304, Mesh and Paisa Seventy Four

(30) : 58 Perforated Sheet, SS 304, Gasket: Rubber Cover: IS:210FG200, Stud/Bolts/Nut: Only

IS:1363CL4.6 & CL 4.0, Eye Bolt: IS:1363CL4.6 & CL4.0, Plug:13% CR.SS (AISI 410), Flange

Dimensions as per IS:1538 table 6/ BS-4504 PN16, with all necessary hardware to

complete the installtion.

177 150 mm 2.00 Nos 14,200.60 Rupees Fourteen

Thousand Two Hundred

and Paisa Sixty Only

178 Woltman Type Bulk Water Meter- AMR Based: 3.00 Nos 38,789.05 Rupees Thirty Eight

Water Meter: Thousand Seven Hundred

Design, Supply, Installation, Testing, Commissioning of Woltman type Bulk Water Meter, CI/ Brass/ Eighty Nine and Paisa Five

Bronze body material, totalizer made of copper can/ suitable anti corrosive metallic material, Only

totaliser metalic shall have 5 mm thick glass cover suitable against antifraud attempts, Flange

End process connection, IP 68 protection class, AMR Woltman Type Water

Meter with removable mechanism, magnetic drive, dry dial, and be fitted with a low mass rotor

which is parallel to the direction of water flow and exhibits dynamic thrust relief, water meters

complete with T Type strainer, ISO 4064 : 2005 with valid CE mark mentioning notified body

number along with MlD / OIML / ISO certification from a recognized International laboratory.

AMR System shall be Walk By / Drive By mode, Wireless AMR trans-receivers shall be directly

fitted on meter or inbuilt, IP 68 protection class, water meter & AMR Module shall be of same

brand, Single Command based AMR Reading and Minimum 90 days historical data retrive

facility, alaram indication/ recording (for Reverse Flow, back flow, Peak

Flow,Minimum Flow, Low Battery Alram, Volume below threshold, Volume above threshold,

Reverse Meter, Meter Stopped),

Minimum 10 years of AMR module bateery life considering one no. communication per day

179 Ball Cock 63 mm 40.00 Nos 555.50 Rupees Five Hundred Fifty

Five and Paisa Fifty Only

180 75 mm 20.00 Nos 1,414.00 Rupees One Thousand

Four Hundred Fourteen

and Zero Paisa Only

181 Providing and Supplying ISI mark C.I Sluice valve as per IS 14846 of Following Class and 92.00 Nos 2,921.93 Rupees Two Thousand

Diameter Including all Taxes insurance,transportation,,freight charges,Octoi,Inspection Nine Hundred Twenty One

charges, Loading, Unloading Conveyance to department Store ,Stacking etc. and Paisa Ninety Three

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

182 40 mm Dia. 12.00 Nos 2,477.53 Rupees Two Thousand

Four Hundred Seventy

Seven and Paisa Fifty

183 63 mm dia 18.00 Nos 3,156.25 Rupees Three Thousand

One Hundred Fifty Six and

Paisa Twenty Five Only

184 75 mm dia 12.00 Nos 3,488.54 Rupees Three Thousand

Four Hundred Eighty Eight

and Paisa Fifty Four Only

185 100 mm dia 4.00 Nos 4,932.84 Rupees Four Thousand

Nine Hundred Thirty Two

and Paisa Eighty Four Only

186 Supply,Installing, tesitng and commissioning C.I butterfly valve, wafer end type class PN 3.00 Nos 3,829.92 Rupees Three Thousand

1.6 as per I.S:13095 or BS:5155, including providing of necessary flanges, nuts, bolts, Eight Hundred Twenty

gaskets etc., complete (including cost of flanges) as per drawings, specification and as Nine and Paisa Ninety Two

directed by the Project Manager. Only

187 150mm Dia 3.00 Nos 4,901.53 Rupees Four Thousand

Nine Hundred One and

Paisa Fifty Three Only

188 SOIL, WASTE, VENT PIPES & FITTINGS 3,115.00 Mtr. 836.73 Rupees Eight Hundred

Supply, installation, testing and commissioning of all Pipes and pipe accessories, traps, supply of Thirty Six and Paisa

supports and support fixing, chase cutting and making good the surfaces, coving, core cutting, Seventy Three Only

etc. required shall be in the Scope of the Contractor. All consumables other than materials

supplied by manufacturer required for fixing the china ware, sanitary ware and CP fittings and

fixtures shall be provided by the Contractor to make the item fully operationable.

Providing, fixing, testing and commissioning ISI Marked UPVC SWR grade soil, waste and vent

pipes Type 'B' 10.0 kg/sq cm conforming to IS: 13592 including all SWR moulded fittings

conforming to IS: 14735 i.e. bends (plain/door), junctions, cowls, offsets, Y (plain/door), tees

(plain/door), clean out plut, etc., with G.I slotted angle with U clamps and anchor fasteners at

1m interval. Ring fit jointing including cutting holes in walls and floors, wherever required and

making them good, complete as directed by the Project Manager. The scope shall also include

fixing waste pipes to the floor with concrete 1:2:4 bedding for full length and wall/ceiling with

necessary clamps, supports, connections, protecting fittings and pipes till the final handing over

etc, for all leads, depth and heights as per drawings, specification and as directed by the

Project Manager. (internal )

110mm outer dia.

189 75mm outer dia. 1,681.80 Mtr. 404.00 Rupees Four Hundred

Four and Zero Paisa Only

190 40mm Dia. 468.00 Mtr. 148.12 Rupees One Hundred

Forty Eight and Paisa

191 150 mm outer dia. 473.00 Mtr. 831.22 Rupees Eight Hundred

Thirty One and Paisa

Twenty Two Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

192 Supply, installation, testing and commissioning of all Pipes and pipe accessories, traps, supply of 716.00 Mtr. 1,219.07 Rupees One Thousand

supports and support fixing, chase cutting and making good the surfaces, coving, core cutting, Two Hundred Nineteen

etc. required shall be in the Scope of the Contractor. All consumables other than materials and Paisa Seven Only

supplied by manufacturer required for fixing the china ware, sanitary ware and CP fittings and

fixtures shall be provided by the Contractor to make the item fully operationable.

Providing, fixing, testing and commissioning ISI Marked UPVC SWR grade soil, waste and vent

pipes Type 'B' 6 kg/sq cm conforming to IS: 13592 including all SWR moulded fittings conforming

to IS: 14735 i.e. bends (plain/door), junctions, cowls, offsets, Y (plain/door), tees (plain/door),

clean out plut, etc., with G.I slotted angle with U clamps and anchor fasteners at 1m interval.

Ring fit jointing including cutting holes in walls and floors, wherever required and making them

good, complete as directed by the Project Manager. The scope shall also include fixing waste

pipes to the floor with concrete 1:2:4 bedding for full length and wall/ceiling with necessary

clamps, supports, connections, protecting fittings and pipes till the final handing over etc, for all

leads, depth and heights as per drawings, specification and as directed by the Project

Manager. (internal )

80 mm outer dia.

193 Providing, fixing, testing and commissioning ISI Marked UPVC SWR grade soil, waste and vent 1,910.00 Mtr. 582.77 Rupees Five Hundred

pipes Type 'A' 4 kg/sqcm conforming to IS: 13592 including all SWR moulded fittings conforming Eighty Two and Paisa

to IS: 14735 i.e. bends, junctions, cowls, offsets, Y (plain/door), tees (plain/door), clean out plug, Seventy Seven Only

etc., with hi-tech clamps and anchor fasteners at 1m interval and jointing with cement solvent

including cutting holes in walls and floors, wherever required and making them good,

complete as directed by the Project Manager. The scope shall also include fixing waste pipes to

the floor with concrete 1:2:4 bedding for full length and wall/ceiling with necessary clamps,

supports, connections, protecting fittings and pipes till the final handing over etc, as per

drawings, specifications and as directed by the Project Manager for all leads, depth and

heights. (For Vent & ASP only)

194 Providing, fixing, testing and commissioning uPVC Floor trap for 125mm dia including 297.00 Each 571.08 Rupees Five Hundred

125x125mm S S grating with frame complete in all respects with necessary Seventy One and Paisa

arrangements with proper care at all levels, protecting fittings and floor trap till the final Eight Only

handing over etc as per technical specifications, drawings and directed by the Project

195 Providing, fixing, testing and commissioning uPVC Floor trap for 125mm dia including 100.00 Each 1,924.28 Rupees One Thousand

125x125mm S S grating with frame complete in all respects with necessary Nine Hundred Twenty Four

arrangements with proper care at all levels, protecting fittings and floor trap till the final and Paisa Twenty Eight

handing over etc as per technical specifications, drawings and directed by the Project Only

196 Providing, Installing, testing and commisssioning UPVC Multi trap of self cleansing design 70.00 Each 167.66 Rupees One Hundred

with or without vent arm with provision for connecting upvc inlet fitttings complete Sixty Seven and Paisa Sixty

including cost of cutting and making good the walls and floors where ever required Six Only

complete in all respects with necessary arrangements with proper care at all levels,

protecting fittings and floor trap till the final handing over etc as per technical

specifications, drawings and directed by the Project Manager.

For 110 mm inlet and 110 mm oulet

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

197 Supply,Installing, testing and commisssioning 125mm dia Bronze Chrome plated ring 297.00 Each 1,423.09 Rupees One Thousand

and Grating with 2 stainless steel screws, ring to be embedded in floor with sealant Four Hundred Twenty

complete in all respects with necessary arrangements with proper care at all levels, Three and Paisa Nine Only

protecting fittings and floor trap till the final handing over etc as per technical

specifications, drawings and directed by the Project Manager.

198 Providing and fixing rain water "KHURRAS" size as per drawing required depth with lead 20.00 Each 1,523.08 Rupees One Thousand

flashing around rainwater pipe with one piece lead sheet of 3 mm thick set on a layer Five Hundred Twenty

of cold bitumen. Including heavy duty CI grating complete as required. Three and Paisa Eight Only

199 SANITARY AND CP FIXTURES 22.00 Each 4,770.23 Rupees Four Thousand

Providing and fixing water closet squattig pan (Indian type W.C. Pan) size 260 x 440mm x Seven Hundred Seventy

580mm of 'Jaquar Continental series CNS-WHT-OP01 or Cera equivalent make' superior and Paisa Twenty Three

colours including "P" trap, earthwork, bed concrete etc. complete as directed by EIC. Only

200 Providing and Installing, testing and commisssioning vitreous china extended wall hung 164.00 Each 8,004.25 Rupees Eight Thousand

European type water closet with C.P. bolts / rag bolts, nuts, C.I. chair or other hanging Four and Paisa Twenty

arrangement, solid plastic seat and cover, C.P. brass hinged, rubber buffers, including Five Only

accessories, C.I / M.S. brackets painted with two coats of enamel paint of approved

shade over a coat of primer, C.P. brass screws and wooden cleats, including cutting

and making good the walls and floors wherever required as per technical

specifications, drawings and directed by the Project Manager. Size:-355x555x370 mm

"Jaquar, Hindware, Cera or Equivalent Make"

201 Providing and Installing, testing and commisssioning vitreous china extended wall hung 22.00 Each 20,691.87 Rupees Twenty Thousand

European type water closet with C.P. bolts / rag bolts, nuts, C.I. chair or other hanging Six Hundred Ninety One

arrangement, solid plastic seat and cover, C.P. brass hinged, rubber buffers, including and Paisa Eighty Seven

accessories, C.I / M.S. brackets painted with two coats of enamel paint of approved Only

shade over a coat of primer, C.P. brass screws and wooden cleats, including cutting

and making good the walls and floors wherever required as per technical

specifications, drawings and directed by the Project Manager.

Jaquar, Hindware, Cera or Equivalent Make

202 Providing and fixing chromium plated brass half trun flush cock of approved quality 208.00 Each 772.65 Rupees Seven Hundred

including fixing in pipe line etc. complete.(iii) 32mm dia. ( Jaquar FLR-5083NK) Jaquar, Seventy Two and Paisa

Hindware, Cera or Equivalent Make Sixty Five Only

203 Providing and fixing chromium plated brass health faucet of approved quality including 186.00 Each 2,135.14 Rupees Two Thousand

fixing in pipe line etc. complete.(iii) 32mm dia. One Hundred Thirty Five

Jaquar, Hindware, Cera or Equivalent Make and Paisa Fourteen Only

204 Providing and Fixing Jet spray heavy duty with S.S. Braided hose 60 cm long As Per 186.00 Each 580.75 Rupees Five Hundred

Drawing And According To Project Manager. Eighty and Paisa Seventy

205 Providing and fixing Jaquar, Hindware, Cera or Equivalent Make Under counter 254.00 Each 3,561.26 Rupees Three Thousand

washbasin with single hole for pillar tap including sutting holes,Angle valve to Pillat tap Five Hundred Sixty One

connection pipe and making good the same but excluding fittings.(A) Vitreous China:(ii) and Paisa Twenty Six Only

Flat Back washbasin (i) In white colour. Size:-510x450x175 mm Equivalent Make

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

206 Providing and fixing Jaquar, Hindware, Cera or Equivalent Make C.P. brass waste for 254.00 Each 89.83 Rupees Eighty Nine and

washbasin (B) 40mm dia. Paisa Eighty Three Only

207 Providing and fixing chromium plated, Bottle trap with necessary couplings of approved 254.00 Each 295.80 Rupees Two Hundred

quality for wash basin. Ninety Five and Paisa

208 Providing and fixing Jaquar, Hindware, Cera or Equivalent Make Pillar tap, capstan 254.00 Each 5,215.64 Rupees Five Thousand

head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. Size:- Two Hundred Fifteen and

450mm Long Paisa Sixty Four Only

209 Supply,Installing, testing and commisssioning Jaquar, Hindware, Cera or Equivalent 377.00 Each 887.79 Rupees Eight Hundred

Make 15mm C.P. brass angle valve with C.P copper connecting pipe 450 mm long and Eighty Seven and Paisa

nuts, washer with C.P. brass flange complete, including cutting and making good the Seventy Nine Only

walls, wherever required as per technical specifications, drawings and directed by the

Project Manager.

210 Providing and fixing Jaquar, Hindware, Cera or Equivalent Make Sink Cock with Regular 123.00 Each 5,600.45 Rupees Five Thousand Six

Swinging Spout (Wall Mounted Model) With Wall Flangecapstan head, screw down high Hundred and Paisa Forty

pressure with screws, shanks and back nuts. (i) 15mm dia. Equivalent Make Five Only

211 Providing&fixing 20mm thick of approved quality of18 mm thick Granite urinal partition 24.00 Sqm 982.18 Rupees Nine Hundred

insingle piece of size 0.62x1.20mt. in cement mortar1:1(1cement:1coarsesand) and Eighty Two and Paisa

finishing with white cement including polishing on bothsides,finishing edges with round Eighteen Only

shape of marble etc.complete.

212 Providing and fixing Jaquar, Hindware, Cera or Equivalent Make Urinal of approved 66.00 Each 1,550.99 Rupees One Thousand

quality including connection with trap and with integral longitudinal flush pipe.(A) Five Hundred Fifty and

Squating plate pattern white earthenware 500mm x 300mm Paisa Ninety Nine Only

213 Providing and fixing PTMT - Urinal Spreader 15 mm of approved quality including fixing 66.00 No. 47.87 Rupees Forty Seven and

in pipe line etc. complete. Paisa Eighty Seven Only

214 Providing and fixing Stainless steel A ISI 304 ( 18/8) kitchen sink ( NIRALI BRAND ) as per IS 123.00 Each 5,995.94 Rupees Five Thousand

13983 with CI brackets and stainless steel plug 40 mm including painting of fittings and Nine Hundred Ninety Five

brackets, cutting and making good the walls wherever required Kitchen sink with drain and Paisa Ninety Four

board 510 x 1040 mm bowl depth 225mm Only

215 Providing, Installing, testing and commisssioning Sink Mixer with Swinging Spout (Wall 128.00 Each 6,445.82 Rupees Six Thousand Four

Mounted Model) With Connecting Legs & Wall Flanges Jaquar, Hindware, Cera or Hundred Forty Five and

Equivalent Make model including cutting and making good the walls wherever Paisa Eighty Two Only

required as per technical specifications, drawings and directed by the Project

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

216 Providing and fixing Stainless steel A ISI 304 as per IS 13983 with CI brackets and stainless 5.00 Each 3,371.23 Rupees Three Thousand

steel plug 40 mm including painting of fittings and brackets, cutting and making good Three Hundred Seventy

the walls wherever required Size and shape As per directed by the project Incharge. One and Paisa Twenty

217 Providing and fixing of white viterous china Janitor sink of Jaquar, Hindware, Cera or 12.00 Each 3,892.34 Rupees Three Thousand

Equivalent Make size 470 x 370 x 180mm deep supported CI/MS brackets (duly painted Eight Hundred Ninety Two

with 2 coats of paint over a coat of primer) C.P. cast brass bottle trap with extension and Paisa Thirty Four Only

piece, rubber adopter, with tap, wall flange, union, C.P. brass chain rubber plug

complete as required.

218 Supply,Fixing 15mm C.P brass Jaquar, Hindware, Cera or Equivalent Make Bib tap with 208.00 Each 2,907.79 Rupees Two Thousand

C.P brass threaded flange complete, including cutting and making good the walls Nine Hundred Seven and

wherever required as per technical specifications, drawings and directed by the Project Paisa Seventy Nine Only

Manager. Equivalent make.

219 providing, Installing, testing and commisssioning "Jaquar Hindware, Cera or Equivalent 208.00 Each 2,578.53 Rupees Two Thousand

Make" 15mm C.P 2-Way brass bib tap with C.P brass threaded flange complete, Five Hundred Seventy

including cutting and making good the walls wherever required as per technical Eight and Paisa Fifty Three

specifications, drawings and directed by the Project Manager. Only

220 Supply,Fixing 20mm C.P brass Jaquar, Hindware, Cera or Equivalent Make Push cock 44.00 Each 1,515.00 Rupees One Thousand

with C.P brass threaded flange complete, including cutting and making good the walls Five Hundred Fifteen and

wherever required as per technical specifications, drawings and directed by the Project Zero Paisa Only

Manager. Equivalent make.

221 Providing and fixing P.V.C. low level flushing cistern 10 litre capacity with manually 186.00 Each 950.02 Rupees Nine Hundred Fifty

controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures and Paisa Two Only

complete as per technical specifications, drawings and directed by the Project

"Jaquar, Hindware, Cera or Equivalent Make"

222 providing, Supply,Installing, testing and commisssioning Jaquar ,Hindware, Cera or 207.00 Each 4,018.79 Rupees Four Thousand

Equivalent Make C.P single lever concealed diverter for bath and shower complete Eighteen and Paisa

with making good the walls & floor wherever required as per technical specifications, Seventy Nine Only

drawings and directed by the Project Manager.(For Special Room) Single Lever

Concealed Divertor ,Shower Head incl. shower arm,Bath spout 235 mm with wall

223 Providing and fixing Jaquar Hindware, Cera or Equivalent Make C.P. brass shower rose 207.00 Each 282.16 Rupees Two Hundred

with 15mm or 20mm inlet.(A) 100mm dia. Each Eighty Two and Paisa

224 FOR HANDICAPPED : Providing and fixing Medline Toilet Safety Rails, Safety Frame for 22.00 Each 5,775.18 Rupees Five Thousand

Toilet with Easy Installation, Height Adjustable Legs, Bathroom Safety for handicap toilet Seven Hundred Seventy

complete as recommended by the etc completed as directed by E.T.C/PMC . Five and Paisa Eighteen

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

225 FOR HANDICAPPED : Providing and fixing entros SC7060H SC7060H 3-in-1 Raised Toilet 22.00 Each 10,814.07 Rupees Ten Thousand

Seat (Whte for handicap toilet as recommended by the etc completed as directed by Eight Hundred Fourteen

E.T.C/PMC . and Paisa Seven Only

226 FOR HANDICAPPED : Providing and fixing Brackets, Handle, tracks (Model R4140) with 22.00 Each 11,894.77 Rupees Eleven Thousand

flexible feed & waste pipes for adjustable type wash basin complete as recommended, Eight Hundred Ninety Four

for handicap toilet etc completed as directed by E.T.C/PMC . and Paisa Seventy Seven

227 Providing & fixing jaquar , Hindware, Cera or Equivalent Make Toilet paper holder for 186.00 Each 418.68 Rupees Four Hundred

toilet of approved quality, as recommended by theetc completed as directed by Eighteen and Paisa Sixty

E.T.C/PMC . Eight Only

228 Providing & fixing jaquar , Hindware, Cera or Equivalent Make S.S. grade 304 Soap dish 342.00 Each 101.00 Rupees One Hundred

holder etc completed as directed by E.T.C/PMC . One and Zero Paisa Only

229 Providing & fixing jaquar , Hindware, Cera or Equivalent Make C.P. brass Double coat 472.00 Each 192.91 Rupees One Hundred

Hook complete.etc completed as directed by E.T.C/PMC . Ninety Two and Paisa

Ninety One Only

230 providing, checking, storing & fixing jaquar , Hindware, Cera or Equivalent Make CP 208.00 Each 603.19 Rupees Six Hundred Three

brass / S.S. towel rod, 500 / 600 mm. long and 20 mm. dia., with concealed type and Paisa Nineteen Only

brackets fixed, to the wall with CP brass screws, etc. complete.

231 Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted 276.00 Each 233.67 Rupees Two Hundred

on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass Thirty Three and Paisa Sixty

screws and washers. Seven Only

232 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water 78.00 Each 1,292.19 Rupees One Thousand

tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(I) Two Hundred Ninety Two

Square mouth traps. (A) 100mm x 100mm size P type. and Paisa Nineteen Only

233 Providing Erecting and fixing double coated ISI water tank of required capacity each 3,60,000.00 Litre 3.95 Rupees Three and Paisa

with all necessary fittings and connection etc. complete on terrace Ninety Five Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

234 Providing and fixing ball cock of approved. quality as directed. 4.00 Each 132.89 Rupees One Hundred

(A) Copper Metal Thirty Two and Paisa Eighty

(I)25mm dia. Nine Only

235 EQUIPMENTS 2.00 Set 4,55,193.17 Rupees Four Lakh Fifty

Surface Hydro-Pneumatic System for Domestic Water supply : Five Thousand One

Compact self contained Hydro-booster system comprising of following : Hundred Ninety Three and

Vertical In-line/Horizontal multi-stage, centrifugal clear water pumps with AISI304 Paisa Seventeen Only

Impeller and AISI316 Shaft, Cast Iron (FG260) Suction and Discharge with CED coating,

TEFCIP55 motor (with Mechanicalseal)Vendor to submit performance curves and

technical catalogue of the proposed model for review and information Controller with

colour touch screen display and Variable Frequency Drive(VFD) integrated in a single

body with pressure sensor transmitter, programming to indicate pump ready, pump

running and fault in display and capable to communicate with other controllers

following MODBUS-RTU or BACNET Class-2 protocol through RS485 port. System should be

capable to compensate for frictional losses at lower flows. All alarms should be

displayed in the controller. System should be equipped with dry running protection.

Indication of all type of faults / on-off status / electrical parameters shall be available

on display and central BMS monitors. Also able to work with pressure switch in manual

mode operation. Source from same manufacturer of pump.

Pre-charged diaphragm pressure vessel with interchangeable membrane, charging

connection, connected to outlet header with necessary flanges, gaskets, isolating

valves, nuts/bolts etc. complete (size of pressure vessel as per manufacturer

recommendation) Set of accessories such as G.I headers (with zink coating) for suction

and discharge, control valves, non return valves, pressure switches, pressure

transducers, pressure gauge, common skid, inter connecting power and control cabling

236 Purpose of system - Flushing water supply system to each utility 2.00 Set 4,04,829.61 Rupees Four Lakh Four

Nos of system - 1set =1 working + 1 stand by Thousand Eight Hundred

Flow rate of system (working pumps) - 350 LPM Twenty Nine and Paisa

Total Head of each pump - 50m Sixty One Only

237 Purpose of system - Hot water supply system to each utility(Recirculating Pump) 2.00 Set 2,38,863.03 Rupees Two Lakh Thirty

Nos of system - 1set =1 working + 1 stand by Eight Thousand Eight

Flow rate of system (working pumps) - 300 LPM Hundred Sixty Three and

Total Head of each pump - 35m Paisa Three Only

238 Providing&erectingwatercoolerhavingstoragecapacity150Ltr.&coolingcapacity150Ltr.p 23.00 Each 46,648.87 Rupees Forty Six Thousand

erhour@anambienttempof45˚C.Theoutlettemp.ofthewatershoulddropby15˚Cwithinahou Six Hundred Forty Eight

r,Thewatercoolershouldbecomprisingofhermeticallysealedcompressor,fanmotor,conde and Paisa Eighty Seven

nsingunit,watertanksurroundedbyevaporating,coil,thermostats,relayetc.completewithn Only

ecessaryinlet&outletconnection.Thebodyofwatercoolerwillbemade from Stainless Steel.

239 Supplying&erecting5stagesinglereverseosmosiswaterpurificationsystemwithM.S.powderc 12.00 Each 1,81,287.93 Rupees One Lakh Eighty

oatedframe,prefilterhousingwith'O'ringpresedimentfilterGACfilter,carbonfiltersuitablebus One Thousand Two

terDCpumpcapacity80psi,mentionwith40psiinlinetypepostcarbonfilterautolow&highpres Hundred Eighty Seven and

sureswitcheswithfollowingsizeofstoragetank&LPHcapacity&erected as directed Paisa Ninety Three Only

[G][email protected]/cm2(1No-

Kirloskar/CRI/Lubi),Dualmediafilter13"x54"-1No,Microncatridgefilter20"x4.0"-

(1No),Highpressurepump1000LPH@11kg/cm2-(1No-

Kirloskar/CRI/Lubi),ROMembranehousingwithROmembraneof40*40-

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

240 Fire Fighting 150.00 Metre 4,358.93 Rupees Four Thousand

Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. Three Hundred Fifty Eight

Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U and Paisa Ninety Three

clamps with Anchor fasteners, grooved tees / grooved elbows / grooved reducers / Only

grooved couplings / grooved unions / grooved bends / flanges / gaskets / Nut bolts

etc., and laying on the surface including painting with one coat of anticorrosive primer

and two coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required.

241 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. 210.00 Metre 2,851.69 Rupees Two Thousand

Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U Eight Hundred Fifty One

clamps with Anchor fasteners, grooved tees / grooved elbows / grooved reducers / and Paisa Sixty Nine Only

grooved couplings / grooved unions / grooved bends / flanges / gaskets / Nut bolts

etc., and laying on the surface including painting with one coat of anticorrosive primer

and two coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required.

242 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. 92.00 Metre 2,038.63 Rupees Two Thousand

Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U Thirty Eight and Paisa Sixty

clamps with Anchor fasteners, grooved tees / grooved elbows / grooved reducers / Three Only

grooved couplings / grooved unions / grooved bends / flanges / gaskets / Nut bolts

etc., and laying on the surface including painting with one coat of anticorrosive primer

and two coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required.

243 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. 414.00 Metre 1,504.04 Rupees One Thousand

Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U Five Hundred Four and

clamps with Anchor fasteners, grooved tees / grooved elbows / grooved reducers / Paisa Four Only

grooved couplings / grooved unions / grooved bends / flanges / gaskets / Nut bolts

etc., and laying on the surface including painting with one coat of anticorrosive primer

and two coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required.

244 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. 110.00 Metre 1,287.81 Rupees One Thousand

Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U Two Hundred Eighty Seven

clamps with Anchor fasteners, grooved tees / grooved elbows / grooved reducers / and Paisa Eighty One Only

grooved couplings / grooved unions / grooved bends / flanges / gaskets / Nut bolts

etc., and laying on the surface including painting with one coat of anticorrosive primer

and two coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

245 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. 140.00 Metre 1,022.11 Rupees One Thousand

Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U Twenty Two and Paisa

clamps with Anchor fasteners, grooved tees / grooved elbows / grooved reducers / Eleven Only

grooved couplings / grooved unions / grooved bends / flanges / gaskets / Nut bolts

etc., and laying on the surface including painting with one coat of anticorrosive primer

and two coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required.

246 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. 140.00 Metre 825.03 Rupees Eight Hundred

Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U Twenty Five and Paisa

clamps with Anchor fasteners, grooved tees / grooved elbows / grooved reducers / Three Only

grooved couplings / grooved unions / grooved bends / flanges / gaskets / Nut bolts

etc., and laying on the surface including painting with one coat of anticorrosive primer

and two coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required.

247 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. 300.00 Metre 679.01 Rupees Six Hundred

Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U Seventy Nine and Paisa

clamps with Anchor fasteners, grooved tees / grooved elbows / grooved reducers / One Only

grooved couplings / grooved unions / grooved bends / flanges / gaskets / Nut bolts

etc., and laying on the surface including painting with one coat of anticorrosive primer

and two coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required.

248 Supply, Installation, Testing and Commissioning of the following sizes grooved fitted M.S. 630.00 Metre 593.64 Rupees Five Hundred

Pipes of Class C (Heavy class) ISI marked including accessories such as MS bracket, U Ninety Three and Paisa

clamps with Anchor fasteners, grooved tees / grooved elbows / grooved reducers / Sixty Four Only

grooved couplings / grooved unions / grooved bends / flanges / gaskets / Nut bolts

etc., and laying on the surface including painting with one coat of anticorrosive primer

and two coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required.

249 Supply, Installation, Testing and commissioning of stainless steel Y Strainer fabricated out 25.00 Each 8,891.80 Rupees Eight Thousand

of 1.6 mm thick stainless steel strainer ,Grade 304 ,sheet with 3 mm dia. Holes with Eight Hundred Ninety One

stainless steel flange. and Paisa Eighty Only

250 Supply, installation, testing and commissioning of Butterfly valve (With tampar Switch) 7.00 Each 18,386.04 Rupees Eighteen

with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. Thousand Three Hundred

b) 150 mm dia. Eighty Six and Paisa Four

251 Supply, installation, testing and commissioning of Butterfly valve (With tampar Switch) 6.00 Each 13,212.42 Rupees Thirteen Thousand

with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. Two Hundred Twelve and

b) 100 mm dia. Paisa Forty Two Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

252 Supply, installation, testing and commissioning of Butterfly valve (With tampar Switch) 6.00 Each 12,682.57 Rupees Twelve Thousand

with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. Six Hundred Eighty Two

b) 80 mm dia. and Paisa Fifty Seven Only

253 Supply, installation, testing and commissioning of Butterfly valve (With tampar Switch) 2.00 Each 9,740.44 Rupees Nine Thousand

with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. Seven Hundred Forty and

b) 50 mm dia. Paisa Forty Four Only

254 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 1.00 Each 14,787.41 Rupees Fourteen

with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, Thousand Seven Hundred

washers, gaskets and conforming to IS 780 of following sizes as required : Eighty Seven and Paisa

b) 100 mm dia. Forty One Only

255 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 2.00 Each 39,725.32 Rupees Thirty Nine

with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, Thousand Seven Hundred

washers, gaskets and conforming to IS 780 of following sizes as required : Twenty Five and Paisa

b) 200 mm dia. Thirty Two Only

256 Supply, Installation, Testing and Commissioning of Non Return Valve with dual plate of 3.00 Each 8,816.80 Rupees Eight Thousand

CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. Eight Hundred Sixteen and

b) 100 mm dia. Paisa Eighty Only

257 Supply, Installation, Testing and Commissioning of Non Return Valve with dual plate of 7.00 Each 6,136.65 Rupees Six Thousand One

CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. Hundred Thirty Six and

b) 80 mm dia. Paisa Sixty Five Only

258 Inspectors test assembly 2.00 Each 6,635.09 Rupees Six Thousand Six

Providing and fixing inspectors test assembly complete with alarm valve, test valve, Hundred Thirty Five and

sight glass sectional drain valve, union with corrosion resistant orifice all complete strictly Paisa Nine Only

as per drawing and standard.

259 Installation control valve assembly 4.00 Each 12,770.74 Rupees Twelve Thousand

Supply, installation, testing and commissioning of UL/FM Approved installation control Seven Hundred Seventy

valve assembly with vertical wet alarm valve with hydraulic alarm motor gong , 2 nos and Paisa Seventy Four

pressure gauges,test valves 50 mm drain valves with all necessary accessories. Only

260 Supply,Installing, tesitng and commissioning cpvc ball valve working pressure of 10 4.00 Each 829.21 Rupees Eight Hundred

kg/cm2 etc. including providing of connectors, flanges, nuts, bolts, gaskets, etc as per Twenty Nine and Paisa

drawings, specification and as directed by the Project Manager. Twenty One Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

261 Supply, Installation, Testing and Commissioning of Air vessel, size of 250 mm dia., 8 mm 3.00 Each 14,556.89 Rupees Fourteen

thick M.S sheet, 1200 mm in height with Air release valve on top and flanged Thousand Five Hundred

connection to down comer, drain arrangement with 25 mm dia. valve, pressure gauge Fifty Six and Paisa Eighty

with required accessories and painting with synthetic enamel paint of approved shade Nine Only

The vessel shall be suitable for working pressure 8 kg/cm², Hydro test at 12Kg/cm².

262 Supplying and fixing single headed internal hydrant valve with instantaneous 64.00 Each 6,100.74 Rupees Six Thousand One

Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked Hundred and Paisa

conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as Seventy Four Only

Single headed Gunmetal

263 Supply, Installation, Testing and Commissioning of Fire Hose Cabinet of size 64.00 Each 5,242.30 Rupees Five Thousand

750mmx600mx250mm fabricated from 16 swg thick MS sheet with 6mm thick glazed Two Hundred Forty Two

hinged type centre opening doors having locking arrangement suitable for and Paisa Thirty Only

accommodating 2 nos RRL hose pipes, 1 no. nozzle, branch pipe & painting with two

coats of anti-corrosive primer and two coats of approved red enamel paint etc.

complete as required.

264 Supply, installation, testing and commissioning 63 mm dia, 2x15 Meters. long RRL Hose 64.00 Each 4,150.68 Rupees Four Thousand

Pipe with 63 mm dia male & female gun metal couplings duly binded with GI wire, rivets One Hundred Fifty and

etc. conforming to IS 636 (type-A - RRL) as required. Paisa Sixty Eight Only

265 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal 64.00 Each 1,927.73 Rupees One Thousand

diameter size nozzle conforming to IS 903 suitable for instantaneous connection to Nine Hundred Twenty

interconnect hose pipe coupling as required : Seven and Paisa Seventy

Gun metal Three Only

266 Supply, installation, testing and commissioning of First- Aid Hose Reel equipment with 64.00 Each 10,014.83 Rupees Ten Thousand

M.S. construction spray painted in post office red, conforming to IS:884 with up to date Fourteen and Paisa Eighty

amendments, complete with the following as required. Three Only

(a) 20 mm nominal internal Dia.water hose thermoplastic

(Textile reinforced) Type-2 as per IS:12585.

(b) 20 mm nominal internal dia gun metal globe valve & nozzle

(c) Drum and swinging type fixing brackets on the wall.

(d) Connections from riser with 25 mm dia. Gun metal ball valve.

267 Providing and fixing standard fireman Axe with heavy duty insulated rubber handle as 64.00 Each 2,781.04 Rupees Two Thousand

per IS: 926 with clamps. Seven Hundred Eighty

One and Paisa Four Only

268 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, 4.00 Each 5,580.19 Rupees Five Thousand

rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid Five Hundred Eighty and

separately) : Paisa Nineteen Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

269 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of 660.00 Each 416.50 Rupees Four Hundred

rating 68 degree centigrade with required accessories : Sixteen and Paisa Fifty

b) Upright Sprinkler Only

270 Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia 60.00 Each 492.30 Rupees Four Hundred

in white finish UL Listed or FM approved complete as required. Ninety Two and Paisa

Horizontal Side Wall Thirty Only

271 Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia 150.00 Each 179.53 Rupees One Hundred

in white finish UL Listed or FM approved complete as required. Seventy Nine and Paisa

Fifty Three Only

272 Providing & fixing flow switch in following sizes M.S. pipe including connection etc as 205.00 Each 7,197.86 Rupees Seven Thousand

required. One Hundred Ninety

150mm dia Seven and Paisa Eighty Six

273 Providing & fixing flow switch in following sizes M.S. pipe including connection etc as 2.00 Each 6,624.59 Rupees Six Thousand Six

required. Hundred Twenty Four and

80mm dia Paisa Fifty Nine Only

274 Providing, fixing, testing & commissioning of installation control valve of cast iron body, 4.00 Set 38,460.38 Rupees Thirty Eight

brass/bronze working parts comprising of water motor alarm, bronze seat clapper, Thousand Four Hundred

clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm Sixty and Paisa Thirty Eight

when the wet riser/sprinkler system activates, pressure gauges, emergency releases, Only

strainer, pressure switch, cock valve complete with drain valve and bypass, test control

box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing

sizes as required.

275 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) 4.00 Each 1,054.03 Rupees One Thousand

with orifice of required size to be fitted between flange & landing valve of external and Fifty Four and Paisa Three

internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete Only

276 Supply, Installation, Testing and Commissioning of 100 mm dia Pressure Gauge of range 4.00 Each 4,795.48 Rupees Four Thousand

0 - 15 Kg / cm² conforming to IS - 3624 having bourdon tube of stainless steel 316 in cast Seven Hundred Ninety

aluminium, stove enameled, black, weather proof case with outer, screwed aluminium Five and Paisa Forty Eight

bezel and complete with necessary U-type stainless steel siphon tube and cock Only

including providing suitably painted angle iron support to the tube etc.as per

specification complete as required.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

277 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity 104.00 Each 6,377.14 Rupees Six Thousand

with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall Three Hundred Seventy

complete. Seven and Paisa Fourteen

a) 4.5 kg. Only

278 Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 182.00 Each 819.92 Rupees Eight Hundred

or 1 Kg capacity with necessary clamp for erection on wall Nineteen and Paisa Ninety

279 Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type 182.00 Each 1,656.40 Rupees One Thousand Six

with gun metal cap 150 gram CO2 gas cartridge, powder and brackets confirming to IS Hundred Fifty Six and Paisa

2171 1985 and complete erected with necessary clamps made from 50 x 6 mm M S Flat Forty Only

with nuts and bolts grouted in wall complete.

[A] For 5 Kg Capacity

280 Supplying, installing, testing and commissioning of GI sheet of 16gauge thickness Fire 4.00 set 2,325.32 Rupees Two Thousand

bucket with clean sand & stand in accordance with IS 2546. Fire bucket shall have two Three Hundred Twenty

coats of anti corrosive paint, two coats of fire red paint on its outside & two coats of Five and Paisa Thirty Two

white paint on the inside. The word "FIRE" shall be clearly stencilled on it in accordance Only

with IS 2546. Vendor to include in his quote all costs relating to mounting of the bucket

at locations stated by the Fire NOC & the Architect/EIC. Vendor to include in his quote

all costs all accessories, consumables, fittings & rigging equipments necessary for the

satisfactory installation of the same.(9 litres)

281 BOOSTER PUMP 4.00 No 1,18,538.75 Rupees One Lakh

Supplying, installation, testing and commissioning of electric driven terrace pump Eighteen Thousand Five

suitable for automatic operation and consisting of following, complete in all respects, as Hundred Thirty Eight and

required: (Terrace Pump) Paisa Seventy Five Only

(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical confirming to IS :

b) Suitable HP squirell cage induction motor TEFC type suitable for operation on

volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal

foot mounted type with Class-'F' insulation, conforming to IS-325.

(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts

etc.as required.

(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

900 lpm at 48 m Head

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

282 Supplying, installation, testing and commissioning of Electric driven Main Fire Pump 4.00 No 3,21,957.44 Rupees Three Lakh

suitable for automatic operation and consisting of following, complete in all Twenty One Thousand

respects, as required : Nine Hundred Fifty Seven

(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze and Paisa Forty Four Only

impeller with stainless steel shaft, mechanical seal conforming to IS

(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM,

suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for

enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts

etc. as required.

(d) Suitable cement concrete foundation duly plastered with anti vibration pads.

Note: *The head of the pump is selected in a manner so as to give a minimum

3.5kgf/cm2 pressure at the highest/farthest point.

2280 lpm at 75 m Head

283 Supplying, installation, testing and commissioning of diesel engine driven main fire 2.00 No 5,07,391.79 Rupees Five Lakh Seven

pump suitable for automatic operation and consisting of following, complete in all Thousand Three Hundred

respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal Ninety One and Paisa

pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical Seventy Nine Only

seal conforming to IS

Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant

IS standard complete with auto starting mechanism, 12 /24 volts electric starting

equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly

insulated with 50 mm thick glass wool with 1.0 mm thick

aluminium sheet cladding, residential silencer, instruments and protection as per

standard specification, stop solenoid for auto stop in the event of fault with audio

indications, painted with post office red colour etc. as required.

M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as

Suitable cement concrete foundation duly plastered and with anti vibration pads.

Note: * The head of the pump is selected in a manner so as to give a minimum

3.5kgf/cm2 pressure at the highest/farthest point.

2280 lpm at 75 m Head

284 Supplying, installation, testing and commissioning of electric driven pressurisation pump 4.00 No 1,01,451.39 Rupees One Lakh One

suitable for automatic operation and consisting of following, complete in all respects, as Thousand Four Hundred

required : (Jockey Pump) Fifty One and Paisa Thirty

Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with Nine Only

stainless steel shaft, mechanical seal conforming to IS :

Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts,

phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot

mounted type with Class-'F' insulation, conforming to IS :

M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as

Suitable cement concrete foundation duly plastered and with anti vibration pads.

180 lpm at 75 m Head

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

285 Infra 1,970.00 Cum 104.04 Rupees One Hundred

Box cutting in road surface to proper slope and camber for making a base for road Four and Paisa Four Only

work including Removing the excavated stuff and depositing on the road side slope as

directed up to 50 Mtr. Lead.

286 Consolidation of surface dressing in one coat with power roller including cost of fuel, 2,692.00 Sqmt 4.94 Rupees Four and Paisa

hire charges of roller etc.complete . Ninety Three Only

287 Providing, laying and compacting clean sand ( CBR Not less than 10% ) Below sub base 538.00 Sqmt 700.94 Rupees Seven Hundred

course including carriage of materials spreading in uniform layer manually on sprered and Paisa Ninety Four

base and compacted with vibratory roller to achive disired density including all Only

materials, laboursetc. a complete.

288 Construction of granular sub-base providing coarse graded machine crushed B.T. 994.00 Cumt 853.45 Rupees Eight Hundred

material satisfying MOST specification of grading ll (B.T. stone aggregate 26.5 to Fifty Three and Paisa Forty

4.75mm -75% and 2.36mm below -25%) including spreading in uniform layer with motor Five Only

grader on prepared surface, mixing by mix in place method with rotavator at OMC

and compacting with vibratory roller to achieve the desired density etc, complete.

289 Providing, laying, spreading and compacting graded stone aggregate to wet mix 113.00 Cumt 1,047.37 Rupees One Thousand

macadam specification including premixing the Material with water at OMC in Forty Seven and Paisa

mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform Thirty Seven Only

layers with paver in sub- base / base course on well prepared surface and compacting

with vibratory roller to achieve the desired density.

290 Rolling and consolidation of soling including filling in depression which occur during the 2,648.00 Sqmt 22.36 Rupees Twenty Two and

process, with power roler 8 tonne to 12 Paisa Thirty Six Only

291 Supplying & filling FINE sand in Filter Beds for preparation of filter bed upto average 5.0 4.00 Cum 431.27 Rupees Four Hundred

mt depth below surrounding average ground level including cost of sand, Thirty One and Paisa

transportation for all leads,loading unloading, spereading in layers as specified below. Twenty Seven Only

Loose thickness at all depths dressing and levelling dewatering sub soil or rain water if

any etc. complete.

[ The uniformity coefficient of sand shell be 1.2 to 1.8 ]

a. Fine sand of size 0.35 to 0.55 mm in a layer of 1000 mm thick

292 Supplying & filling GRAVEL in Filter Bed for preparation of filter bed upto average 7.0 mt 0.80 Cumt 1,025.15 Rupees One Thousand

depth below surrounding average ground level including cost of gravel transportation Twenty Five and Paisa

for all leads, loading, unloading, spereading in layers as specified below. Loose Fifteen Only

thickness at all depths dressing and leveling dewatering sub soil or rain water if any

a. Gravel of size 3 to 6 mm in a layer of 150 mm thick

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

293 b. Gravel of size 6 to 20 mm in a layer of 200 mm thick 2.00 Cumt 1,025.15 Rupees One Thousand

Twenty Five and Paisa

294 c. Gravel of size 20 to 40 mm in a layer of 200 mm thick 2.00 Cumt 1,493.79 Rupees One Thousand

Four Hundred Ninety Three

and Paisa Seventy Nine

295 d. Gravel of size 40 to 60 mm in a layer of 250 mm thick 2.00 Cumt 1,533.18 Rupees One Thousand

Five Hundred Thirty Three

and Paisa Eighteen Only

296 Supplying & filling BOULDERS around central water trough in a layer of 200 mm thick. in 2.00 Cumt 1,042.32 Rupees One Thousand

Filter Bed . Forty Two and Paisa Thirty

297 Excavation in any soil upto 30 cm. depth, bracking clods, removing unwanted stuff such 45.00 Cumt 94.33 Rupees Ninety Four and

as brick bats, stones, grass roots etc. refilling the same, preplanting watering top- Paisa Thirty Three Only

digging, relevelling and bringing the earth to fine tilth ready for sowing or planting.

298 Providing Loam or Clay soil of approval quality on site.) 45.00 Cumt 146.40 Rupees One Hundred

Forty Six and Paisa Thirty

299 Labour for spreading and mixing loam or clay soil or river silt evenly over excavated 45.00 Cumt 75.47 Rupees Seventy Five and

area and levelling the same after clods etc. (Rate for one Cu. m. of soil) Paisa Forty Six Only

300 Providing Farm yard Manure of approved quality on site 12.00 Cumt 331.80 Rupees Three Hundred

Thirty One and Paisa

Seventy Nine Only

301 Supplying and stacking of good earth at site including royalty and carriage up to 1 km 34.00 Cumt 411.40 Rupees Four Hundred

(earth measured in stacks will be reduced by 20% for payment). Eleven and Paisa Thirty

302 Mixing and Filling of mix of manure and good earth in proportion of 1:3 (1 part manure 46.00 Cumt 70.93 Rupees Seventy and

and 3 part sweet earth) in required thickness including proper dressing, leveling, rolling, Paisa Ninety Three Only

watering and compacting as per the levels specified in the drawings as approved by

Engineer-in-Charge (cost of manure or/and good earth to be paid separately)

303 Providing pure doob (Dharo) grass suckers and planting the same at a distance of 8 to 151.00 Sqmt 50.50 Rupees Fifty and Paisa

10 Cm. both ways and maintaining the same till well established ( about 45 days) Fifty Only

304 Providing well grown seedings of annuals of specified varities and planting the same at 120.00 Sqmt 18.94 Rupees Eighteen and

suitable distance as directed and maintaining the same till well established. Paisa Ninety Three Only

( about 45 days )

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

305 Providing bulbs of choice Canna varieties and planting the same at a distance of 60 144.57 Sqmt 76.72 Rupees Seventy Six and

cm x 60 Cm and maintaining till well established (about 45 days). Paisa Seventy One Only

306 Providing cuttings of clerodendron and planting the same in two rows in 30 cm width 150.00 Sqmt 9.44 Rupees Nine and Paisa

roughly at a distance of 18 Cm x 18 Cm and maintaining till well established ( about 45 Forty Four Only

307 Providing well grown shrubs of specified species and planting the same as distance of 35.00 No. 202.00 Rupees Two Hundred Two

roughly 1.5 M x 1.5 M and maintaining the same till well established ( about 45 days ). and Zero Paisa Only

308 Providing, supplying, planting & developing of following Trees / Plants etc. in required 9.00 No. 606.00 Rupees Six Hundred Six

patterns, removing unwanted elements/ weeds, mixing of new soil & fertilizers, and Zero Paisa Only

Treatment for unwanted weeds, cleaning, watering & periodically spraying of fertilizer

incl. cost of transportation, fertilizer, labours etc. & maintaing the Trees / Plants for

months in all respects. The height of trees at the time of planting shall be 45 to 60 cms .

Neem ,Plumeria obtusa, Assopalav, Bottle palm, Canocarpus, Mimosops elengi,

Gulmahor Champo, Borsalli in equal propotion.

309 Laying out Lawn : After excavating soil upto 30 cm depth , preparing soil for planting by 151.00 Sqmt 72.62 Rupees Seventy Two and

supplying and mixing pepairing soil for planting by supplying and mixing Farm Yard Paisa Sixty One Only

Manure at the rate of 5 cu. m. per 100 Sq. Mt. area , providing and planting suckers of

pure dharo ( doob ) grass roughly at 10 cm x 10 cm distance and maintaining till well

established etc complete ( about 45 days ).

310 Raising Shrubbery : after excavating soil upto 30 cm. preparing soil for planting by 70.00 No. 81.36 Rupees Eighty One and

supplying and mixing farm Yard Manure at the rate of 5 cu. m. per 100 sq.m. area, Paisa Thirty Five Only

providing and planting well grown shrubs of specified species roughly at 1.5 m x 1.5 m

distance and maintaining till well established ( about 45 days ) complete.

311 Designing, Providing and Supplying Drip Irrigation System capable of watering the 22.00 Month 10,100.00 Rupees Ten Thousand

Housing site admeasuring approx. 5 H consisting of the following works (The design of One Hundred and Zero

entire system shall be got approved before execution) :(i) Designing, providing and Paisa Only

installing Hydro pneumatic system (pressure pump) so as to supply water to the entire

site (The system shall be installed based on the tank at Central Service Yard).ii) Desiging,

zoning of the entire site so as to minimise power consumption and water losses.iii)

Providing, supplying and fixing adequate numbers of control valves so as to maintain

and support the zoning as described above.iv) Providing, supplying & laying 20 to

mm HDPEpressure pipe (4kg / cm2) in the entire site as required for watering the plants,

lawns etc. without disturbing permanent strucutres and pucca roads v) Providing,

Supplying and laying 15-35 mm dia PVC flexible pipe to water the hedges, shrubs,

shaded trees etc.vi) Providing, Supplying and laying 5mm dia PVC drip at all large trees

as per requirement in design.vii) Providing, supplying and laying Pop-up which can

cover 6.00 m. radially. The layout of pop-up shall be so designed, so that the flow from

the adjoining pop-ups shall over lap each other by atleast 3.00 m.at all required

locations.viii) Providing, Supply and laying sprinkler with a capacity to cover 6.00 m

radially at all required locations.ix) Providing, Supplying and installing fertilizer mixing

and distribution system by providing a 200 ltr. capacityvalves so as prepare dose of

required mix and allow mixing to the distribution system.Commissioning the entire

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

312 Designing, Providing and Supplying Drip Irrigation System capable of watering the 91.00 Month 70.70 Rupees Seventy and

Housing site admeasuring approx. 5 H consisting of the following works (The design of Paisa Seventy Only

entire system shall be got approved before execution) :(i) Designing, providing and

installing Hydro pneumatic system (pressure pump) so as to supply water to the entire

site (The system shall be installed based on the tank at Central Service Yard).ii) Desiging,

zoning of the entire site so as to minimise power consumption and water losses.iii)

Providing, supplying and fixing adequate numbers of control valves so as to maintain

and support the zoning as described above.iv) Providing, supplying & laying 20 to

mm HDPEpressure pipe (4kg / cm2) in the entire site as required for watering the plants,

lawns etc. without disturbing permanent strucutres and pucca roads v) Providing,

Supplying and laying 15-35 mm dia PVC flexible pipe to water the hedges, shrubs,

shaded trees etc.vi) Providing, Supplying and laying 5mm dia PVC drip at all large trees

as per requirement in design.vii) Providing, supplying and laying Pop-up which can

cover 6.00 m. radially. The layout of pop-up shall be so designed, so that the flow from

the adjoining pop-ups shall over lap each other by atleast 3.00 m.at all required

locations.viii) Providing, Supply and laying sprinkler with a capacity to cover 6.00 m

radially at all required locations.ix) Providing, Supplying and installing fertilizer mixing

and distribution system by providing a 200 ltr. capacityvalves so as prepare dose of

required mix and allow mixing to the distribution system.Commissioning the entire

313 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 80mm 1,236.00 Sqmt 686.90 Rupees Six Hundred Eighty

thick with grade of concrete M35 pnumatic compressed / vibrated mechanically and Six and Paisa Ninety Only

as per approved design Confirming to IS 15658 : 2006 including 40mm Sand layer for

levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP

63- 2018 etc. Complete.

314 Forming groove of uniform size from 12 x 12 mm and upto 50 x15 mm in plastered 100.00 Rmt 80.27 Rupees Eighty and Paisa

surface as per approved pattern using wooden batten, nailed to the under layer Twenty Six Only

including removal of wooden battens, repairs to the edges of plaster panel and

finishing the groove complete as per specifications and direction of the EIC.

315 Providing and fixing 25mm thick tharmocol for 25 mm wide expansion joint including 42.00 Sqm 3,145.72 Rupees Three Thousand

cutting to required size and shape at all levels etc.complete as directed. One Hundred Forty Five

and Paisa Seventy Two

316 Supplying and Fixing waste bin 80 liter 32.00 No. 2,525.00 Rupees Two Thousand

Five Hundred Twenty Five

and Zero Paisa Only

317 Paintinglines,dashes,arrows,letters etc on road,air fields and like in two coats with road 1,274.00 Rmt 13.05 Rupees Thirteen and

markingpain,brushing including cleaning the surface of all dirts ,dust and other foreign Paisa Four Only

(I) Over 10 cm in width

318 Providing and fixing precast concrete kerb stone pf gray cement based concrete 364.00 Rmt 361.64 Rupees Three Hundred

block 30 cm length, 30 cm height and 15 cm thick of M250 grade concrete as per Sixty One and Paisa Sixty

approved design and including excavation for fixing in proper line and level filling the Four Only

joint with C:M 1 : 3 (1 Cement :3 fine sand ) etc complete.

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

319 Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with 116.00 Rmt 2,181.60 Rupees Two Thousand

internal cement mortar lining including all taxes, insurance, transportation, freight One Hundred Eighty One

charges, octroi, inspection charges, loading, unloading, conveyance to departmental and Paisa Sixty Only

stores, stacking etc. complete. (IS 8329-2000). Rate for DI pipe based on Wholesale Price

index of Pig Iron as 124.6 for the month of Febuaury-2021. For sewerage project cement

mortor lining shall be with sulphate resistance cement

200 mm dia pipe

320 Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with 163.00 Rmt 1,612.97 Rupees One Thousand Six

internal cement mortar lining including all taxes, insurance, transportation, freight Hundred Twelve and Paisa

charges, octroi, inspection charges, loading, unloading, conveyance to departmental Ninety Seven Only

stores, stacking etc. complete. (IS 8329-2000). Rate for DI pipe based on Wholesale Price

index of Pig Iron as 124.6 for the month of Febuaury-2021. For sewerage project cement

mortor lining shall be with sulphate resistance cement

150 mm dia pipe

321 Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with 61.00 Rmt 941.32 Rupees Nine Hundred

internal cement mortar lining including all taxes, insurance, transportation, freight Forty One and Paisa Thirty

charges, octroi, inspection charges, loading, unloading, conveyance to departmental Two Only

stores, stacking etc. complete. (IS 8329-2000). Rate for DI pipe based on Wholesale Price

index of Pig Iron as 124.6 for the month of Febuaury-2021. For sewerage project cement

mortor lining shall be with sulphate resistance cement

322 Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with 140.00 Rmt 1,097.87 Rupees One Thousand

internal cement mortar lining including all taxes, insurance, transportation, freight Ninety Seven and Paisa

charges, octroi, inspection charges, loading, unloading, conveyance to departmental Eighty Seven Only

stores, stacking etc. complete. (IS 8329-2000). Rate for DI pipe based on Wholesale Price

index of Pig Iron as 124.6 for the month of Febuaury-2021. For sewerage project cement

mortor lining shall be with sulphate resistance cement

100 mm dia pipe

323 Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar lined 116.00 Rmt 99.99 Rupees Ninety Nine and

D. I. Pipes of various classes with CI / MS specials of following diameters in proper Paisa Ninety Nine Only

position, grade and alignment as directed by Engineer-in-charge including hydraulic

testing etc. comp.

200 mm dia pipe

324 Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar lined 61.00 Rmt 27.27 Rupees Twenty Seven

D. I. Pipes of various classes with CI / MS specials of following diameters in proper and Paisa Twenty Seven

position, grade and alignment as directed by Engineer-in-charge including hydraulic Only

testing etc. comp.

325 Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar lined 163.00 Rmt 76.76 Rupees Seventy Six and

D. I. Pipes of various classes with CI / MS specials of following diameters in proper Paisa Seventy Six Only

position, grade and alignment as directed by Engineer-in-charge including hydraulic

testing etc. comp.

150 mm dia pipe

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

326 Lowering, laying and jointing C. I. S & S Spun pipes suitable for Tyton joints / Mortar lined 140.00 Rmt 55.55 Rupees Fifty Five and

D. I. Pipes of various classes with CI / MS specials of following diameters in proper Paisa Fifty Five Only

position, grade and alignment as directed by Engineer-in-charge including hydraulic

testing etc. comp.

100 mm dia pipe

327 Providing and supplying in standard length ISI mark high density Polyethylene H.D.P.E. 40.00 Rmt 179.78 Rupees One Hundred

Pipes suitable for potable water as per IS specification no. 4984/1995 including all local Seventy Nine and Paisa

and central taxes, transportation, freight charges, octroi, inspection charges, loading, Seventy Eight Only

unloading, conveyance to the dept. stores etc. comp.

328 Lowering, laying and jointing HDPE pipes and specials of following class and diameter 42.00 Rmt 7.07 Rupees Seven and Paisa

(By butt fusion welding method) including cost of conveyance from stores to site of Seven Only

works at all level including cost of labour, material, giving satisfactory hydraulic testing

329 Providing, supplying and fixing ISI mark CI Sluice/Control valves PN 1.6 at site of work 2.00 No. 14,203.63 Rupees Fourteen

tested to specified test pressure including all taxes, octroi, insurance, transportation, Thousand Two Hundred

freight charges, loading, unloading stacking etc. complete and all labour charges of Three and Paisa Sixty

lowering, laying, jointing in position including cost of jointing materials, nut-bolts and Three Only

giving satisfactory hydraulic testing etc. complete.

A12) PN-1.6 with gear operated ( Alt-1 type long body )

330 Providing, supplying and fixing ISI mark CI Sluice/Control valves PN 1.6 at site of work 6.00 No. 8,625.40 Rupees Eight Thousand Six

tested to specified test pressure including all taxes, octroi, insurance, transportation, Hundred Twenty Five and

freight charges, loading, unloading stacking etc. complete and all labour charges of Paisa Forty Only

lowering, laying, jointing in position including cost of jointing materials, nut-bolts and

giving satisfactory hydraulic testing etc. complete.

A12) PN-1.6 with gear operated ( Alt-1 type long body )

331 Providing, supplying and fixing ISI mark CI Sluice/Control valves PN 1.6 at site of work 2.00 No. 4,074.34 Rupees Four Thousand

tested to specified test pressure including all taxes, octroi, insurance, transportation, Seventy Four and Paisa

freight charges, loading, unloading stacking etc. complete and all labour charges of Thirty Four Only

lowering, laying, jointing in position including cost of jointing materials, nut-bolts and

giving satisfactory hydraulic testing etc. complete.

A12) PN-1.6 with gear operated ( Alt-1 type long body )

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

332 Providing, supplying and fixing ISI mark CI Sluice/Control valves PN 1.6 at site of work 8.00 No. 5,493.39 Rupees Five Thousand

tested to specified test pressure including all taxes, octroi, insurance, transportation, Four Hundred Ninety Three

freight charges, loading, unloading stacking etc. complete and all labour charges of and Paisa Thirty Nine Only

lowering, laying, jointing in position including cost of jointing materials, nut-bolts and

giving satisfactory hydraulic testing etc. complete.

A12) PN-1.6 with gear operated ( Alt-1 type long body )

333 Providing, supplying and fixing ISI mark Reflux/Non Return valves at site of work tested 2.00 No. 17,486.13 Rupees Seventeen

to specified test pressure including all taxes, octroi, insurance, transportation, freight Thousand Four Hundred

charges, loading, unloading stacking etc. complete and all labour charges of lowering, Eighty Six and Paisa

laying, jointing in position including cost of jointing materials, nut-bolts and giving Thirteen Only

satisfactory hydraulic testing etc. complete.

Reflux valves PN 1.6 IS 5312 with ISI mark

334 Providing, supplying and fixing ISI mark Reflux/Non Return valves at site of work tested 6.00 No. 9,022.33 Rupees Nine Thousand

to specified test pressure including all taxes, octroi, insurance, transportation, freight Twenty Two and Paisa

charges, loading, unloading stacking etc. complete and all labour charges of lowering, Thirty Three Only

laying, jointing in position including cost of jointing materials, nut-bolts and giving

satisfactory hydraulic testing etc. complete.

Reflux valves PN 1.6 IS 5312 with ISI mark

335 Providing, supplying and fixing ISI mark Reflux/Non Return valves at site of work tested 2.00 No. 6,062.02 Rupees Six Thousand Sixty

to specified test pressure including all taxes, octroi, insurance, transportation, freight Two and Paisa Two Only

charges, loading, unloading stacking etc. complete and all labour charges of lowering,

laying, jointing in position including cost of jointing materials, nut-bolts and giving

satisfactory hydraulic testing etc. complete.

Reflux valves PN 1.6 IS 5312 with ISI mark

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

336 Woltman Type Bulk Water Meter- AMR Based: 2.00 No. 24,728.84 Rupees Twenty Four

Water Meter: Thousand Seven Hundred

Design, Supply, Installation, Testing, Commissioning of Woltman type Bulk Water Meter, CI/ Brass/ Twenty Eight and Paisa

Bronze body material, totalizer made of copper can/ suitable anti corrosive metallic material, Eighty Four Only

totaliser metalic shall have 5 mm thick glass cover suitable against antifraud attempts, Flange

End process connection, IP 68 protection class, AMR Woltman Type Water

Meter with removable mechanism, magnetic drive, dry dial, and be fitted with a low mass rotor

which is parallel to the direction of water flow and exhibits dynamic thrust relief, water meters

complete with T Type strainer, ISO 4064 : 2005 with valid CE mark mentioning notified body

number along with MlD / OIML / ISO certification from a recognized International laboratory.

AMR System shall be Walk By / Drive By mode, Wireless AMR trans-receivers shall be directly

fitted on meter or inbuilt, IP 68 protection class, water meter & AMR Module shall be of same

brand, Single Command based AMR Reading and Minimum 90 days historical data retrive

facility, alaram indication/ recording (for Reverse Flow, back flow, Peak

Flow,Minimum Flow, Low Battery Alram, Volume below threshold, Volume above threshold,

Reverse Meter, Meter Stopped),

Minimum 10 years of AMR module bateery life considering one no. communication per day

337 Providing and supplying C. I. Air valves of approved make & quality of following class 6.00 No. 2,520.96 Rupees Two Thousand

and diameter including all taxes, insurance, transportation, freight charges, octroi, Five Hundred Twenty and

inspection charges, loading, unloading, conveyance to departmental stores, stacking Paisa Ninety Six Only

50 mm Dia Air Valve

338 Providing and supplying C. I. Air valves of approved make & quality of following class 4.00 No. 2,033.13 Rupees Two Thousand

and diameter including all taxes, insurance, transportation, freight charges, octroi, Thirty Three and Paisa

inspection charges, loading, unloading, conveyance to departmental stores, stacking Thirteen Only

40 mm Dia Air Valve

339 Construction of valves chamber in brick or stone masonry, locally available in C.M 16.00 No. 2,594.69 Rupees Two Thousand

1:6,foundation concrete 150 mm thick in C.C. 1:4:8 of trap metal size 25 mm to 40 Five Hundred Ninety Four

mm thick, inside cement plaster in C.M 1:3, and cement pointing outside in C.M 1:3 and Paisa Sixty Nine Only

etc. complete as given size. Upto 1 mt depth from G.L. to pipe invert level incl.

complete civil works but excluding cost of excavation and refilling.

With fixing of CI-MH frame and cover (Excluding cost of CI-MH frame and cover )

(a) Size of 0.30 m x 0.30 m and 1.0 m deep

with single piece 10 cm with fixing M. H. cover

340 Providing and supplying Cast iron Manhole Frame & Cover ( All type ) for water supply. 1,355.00 Kg 58.58 Rupees Fifty Eight and

Paisa Fifty Eight Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

341 Fixing all types of C.I. Frame and cover in C.C.1:2:4 including carting etc. complete 19.00 No. 281.79 Rupees Two Hundred

excluding cost of R.C.C. Eighty One and Paisa

Seventy Nine Only

342 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 73.00 Rmt 334.31 Rupees Three Hundred

standard lengths of following class and diameter suitable for either collar joints or Thirty Four and Paisa Thirty

rubber ring joints including all taxes, insurance, transportation, freight charges, octroi, One Only

inspection charges, loading, unloading, conveyance to departmental stores, stacking

etc. complete. (IS - 458/ 1989)

Note : One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length

socketed pipe, cost included in rates below.

Class NP3 Test pressure 0.7 Kg/sq.cm

343 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 209.00 Rmt 421.17 Rupees Four Hundred

standard lengths of following class and diameter suitable for either collar joints or Twenty One and Paisa

rubber ring joints including all taxes, insurance, transportation, freight charges, octroi, Seventeen Only

inspection charges, loading, unloading, conveyance to departmental stores, stacking

etc. complete. (IS - 458/ 1989)

Note : One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length

socketed pipe, cost included in rates below.

Class NP3 Test pressure 0.7 Kg/sq.cm

344 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in 73.00 Rmt 63.63 Rupees Sixty Three and

proper position,grade and alignment as directed by Engineer-in-charge including Paisa Sixty Three Only

conveyance from stores to site of work,labour, giving hydraulic testing as per ISI code.

Class NP3 Test pressure 0.7 Kg/sq.cm

345 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in 199.00 Rmt 88.88 Rupees Eighty Eight and

proper position,grade and alignment as directed by Engineer-in-charge including Paisa Eighty Eight Only

conveyance from stores to site of work,labour, giving hydraulic testing as per ISI code.

Class NP3 Test pressure 0.7 Kg/sq.cm

346 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 171.00 Rmt 532.27 Rupees Five Hundred

standard lengths of following class and diameter suitable for either collar joints or Thirty Two and Paisa

rubber ring joints including all taxes, insurance, transportation, freight charges, octroi, Twenty Seven Only

inspection charges, loading, unloading, conveyance to departmental stores, stacking

etc. complete. (IS - 458/ 1989)

Note : One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length

socketed pipe, cost included in rates below.

Class NP3 Test pressure 0.7 Kg/sq.cm

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

347 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in 171.00 Rmt 97.97 Rupees Ninety Seven and

proper position,grade and alignment as directed by Engineer-in-charge including Paisa Ninety Seven Only

conveyance from stores to site of work,labour, giving hydraulic testing as per ISI code.

Class NP3 Test pressure 0.7 Kg/sq.cm

348 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 29.00 Rmt 762.55 Rupees Seven Hundred

standard lengths of following class and diameter suitable for either collar joints or Sixty Two and Paisa Fifty

rubber ring joints including all taxes, insurance, transportation, freight charges, octroi, Five Only

inspection charges, loading, unloading, conveyance to departmental stores, stacking

etc. complete. (IS - 458/ 1989)

Note : One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length

socketed pipe, cost included in rates below.

Class NP3 Test pressure 0.7 Kg/sq.cm

349 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in 29.00 Rmt 120.19 Rupees One Hundred

proper position,grade and alignment as directed by Engineer-in-charge including Twenty and Paisa

conveyance from stores to site of work,labour, giving hydraulic testing as per ISI code. Nineteen Only

Class NP3 Test pressure 0.7 Kg/sq.cm

350 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 80.00 Rmt 887.79 Rupees Eight Hundred

standard lengths of following class and diameter suitable for either collar joints or Eighty Seven and Paisa

rubber ring joints including all taxes, insurance, transportation, freight charges, octroi, Seventy Nine Only

inspection charges, loading, unloading, conveyance to departmental stores, stacking

etc. complete. (IS - 458/ 1989)

Note : One collar should be supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied with each full length

socketed pipe, cost included in rates below.

Class NP3 Test pressure 0.7 Kg/sq.cm

351 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 53.00 Rmt 1,374.61 Rupees One Thousand

standard lengths of following Three Hundred Seventy

class and diameter suitable for either collar joints or rubber ring joints including all taxes, Four and Paisa Sixty One

insurance, transportation, Only

freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc.

450 mm RCC pipe

352 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 79.00 Rmt 1,965.46 Rupees One Thousand

standard lengths of following Nine Hundred Sixty Five

class and diameter suitable for either collar joints or rubber ring joints including all taxes, and Paisa Forty Six Only

insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc.

600 mm RCC pipe

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

353 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 42.00 Rmt 2,924.96 Rupees Two Thousand

standard lengths of following Nine Hundred Twenty Four

class and diameter suitable for either collar joints or rubber ring joints including all taxes, and Paisa Ninety Six Only

insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc.

700 mm RCC pipe

354 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 29.00 Rmt 3,206.75 Rupees Three Thousand

standard lengths of following Two Hundred Six and Paisa

class and diameter suitable for either collar joints or rubber ring joints including all taxes, Seventy Five Only

insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc.

800 mm RCC pipe

355 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 29.00 Rmt 3,637.01 Rupees Three Thousand

standard lengths of following Six Hundred Thirty Seven

class and diameter suitable for either collar joints or rubber ring joints including all taxes, and Paisa One Only

insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc.

900 mm RCC pipe

356 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 29.00 Rmt 4,869.21 Rupees Four Thousand

standard lengths of following Eight Hundred Sixty Nine

class and diameter suitable for either collar joints or rubber ring joints including all taxes, and Paisa Twenty One

insurance, transportation, Only

freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc.

1000 mm RCC pipe

357 Providing and supplying ISI Standard R.C.C. pipes(of Sulphate Resisting Cement) in 122.00 Rmt 5,957.99 Rupees Five Thousand

standard lengths of following Nine Hundred Fifty Seven

class and diameter suitable for either collar joints or rubber ring joints including all taxes, and Paisa Ninety Nine

insurance, transportation, Only

freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc.

1200 mm RCC pipe

358 Lowering, laying and jointing R. C. C. pipes in C. M. 1:1 1/2 of following diameters in 24.00 No. 134.33 Rupees One Hundred

proper position,grade and alignment as directed by Engineer-in-charge including Thirty Four and Paisa Thirty

conveyance from stores to site of work,labour, giving hydraulic testing as per ISI code. Three Only

Class NP3 Test pressure 0.7 Kg/sq.cm

359 Providing & constructing sewer manholes, scraper manholes & unit house connection 18.00 Mtr 12,300.79 Rupees Twelve Thousand

chamber, as per the type design in brick masonary in CM 1:3 & out side plaster in CM Three Hundred and Paisa

1:3 necessary coping in RCC M20, fixing CI steps & fixing manhole frame & covers. (but Seventy Nine Only

excluding supply of manhole frame & covers) over manholes & house connections,

chambers & fixing manhole covers (but excluding supply of manhole covers) over

scraper manholes etc. complete, providing & fixing safety chain wherever necessary as

per the stipulation in the type design complete (excl. excavation)

Manhole type "A" circular type having inside dia of minimum 900 mm & for depth from

1.0 m to 1.5 m (for 150 mm to 500 mm dia. Sewer pipe)

Manhole type "A" as above but upto 1.00 m depth

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

360 Extra depth beyond 1.00 m but upto 1.50 m depth for "A" type manhole above. 12.00 No. 6,694.28 Rupees Six Thousand Six

Hundred Ninety Four and

Paisa Twenty Eight Only

361 Manhole type "B" circular type having inside dia of minimum 1500 mm & for depth from 18.00 Mtr 21,327.16 Rupees Twenty One

1.5 m to 4.00 m (for 150 mm to 600 mm dia. Sewer pipe) Thousand Three Hundred

Manhole type "B" as above but upto 1.50 m depth Twenty Seven and Paisa

362 Extra depth beyond 1.50 m but upto 4.00 m depth for "B" type manhole above. 6.00 No. 12,436.13 Rupees Twelve Thousand

Four Hundred Thirty Six and

Paisa Thirteen Only

363 RCC precast MH frame & cover manufacture, supply & delivery at store or at site of 20.00 No. 1,132.21 Rupees One Thousand

work precast RCC M 200 frame & cover suitable to drainage MH & as per type design & One Hundred Thirty Two

drawing including cost of reinforcement, MS angle or flat, curing mold work, etc. and Paisa Twenty One

R.C.C. covers Heavy Duty Only

Frame suitable for 50 cm opening of MH

364 Cover suitable for 50 cm opening of MH 20.00 No. 1,184.73 Rupees One Thousand

One Hundred Eighty Four

and Paisa Seventy Three

365 Supplying and erecting and commissioning SUBMERCIBLE PUMP capable of 2.00 No. 22,748.23 Rupees Twenty Two

discharging 542 lit / minute against a total head of 25.08 M driven by electrical motor Thousand Seven Hundred

as specified after reaching exact depth of bore with tools,lubricator etc. comp. as Forty Eight and Paisa

directed. (4.02 Hp) Twenty Three Only

366 Supplying and erecting and commissioning SUBMERCIBLE PUMP capable of 2.00 No. 12,408.86 Rupees Twelve Thousand

discharging 115 lit / minute against a total head of 25.08 M driven by electrical motor Four Hundred Eight and

as specified after reaching exact depth of bore with tools,lubricator etc. comp. as Paisa Eighty Six Only

directed. (0.85 Hp)

367 Constructing brick masonary chamber for underground C.I Inspection chamber and 11.00 No. 2,932.93 Rupees Two Thousand

bends with bricks having crushing stregth not less then 35 kg/cm2 in c:m 1 :5 C.I. cover Nine Hundred Thirty Two

with frame (light duty) 455 mm x 610 mm internal dimensions total weight of cover with and Paisa Ninety Two Only

frame to be not less than 38 Kg .(wt. of cover 23 Kg.) and wt.of frame 15 Kg. ) ( R.C.C.

top slabe with 1:2:4 mix ( 1: cement :2 coarse sand : 4 graded stone aggregate 20 mm

size) foundation concrete 1:5:10 in side plaster 15 mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete. (i) in side dimensions 455mm x 610 mm and 450 mm deep for single pipe line

368 Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber and water 11.00 No 1,246.92 Rupees One Thousand

tight C.I. cover with frame of 300 mm x 300 mm size (Inside) with standard weight (I) Two Hundred Forty Six and

Square mouth traps (B) 150 mm x 100 mm size P or R type Paisa Ninety One Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

369 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method 130.00 No 564.71 Rupees Five Hundred Sixty

prescribed in IS: 2800 (part I), including collecting samples from different strata, Four and Paisa Seventy

preparing and submitting strata chart/ bore log, including hire & running charges of all One Only

equipments, tools, plants & machineries required for the job, all complete as per

direction of Engineer -in-charge, upto 90 metre depth below ground level.

300 mm dia metre

370 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric 80.00 No 2,051.44 Rupees Two Thousand

Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel Fifty One and Paisa Forty

threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming Four Only

to IS: 8110, of reputed and approved make, having wall thickness not less than

mm, including painted with outside surface with two coats of anticorrosive bitumestic

paint of approved brand and manufacture, including hire & labour charges, fittings &

accessories, all complete, for all depths, as per direction of Engineer -in-charge.

200 mm nominal size dia

371 Providing and fixing M.S. fan clamps tube 1 of 16 m.m. dia M.S. bar bent to shape with 2.00 No 129.49 Rupees One Hundred

hooked ends to R.C.C. slabs during laying including painting the exposed portion of the Twenty Nine and Paisa

loops all as per standard design complete. Forty Nine Only

372 Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of 6.00 No 1,830.10 Rupees One Thousand

tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size Eight Hundred Thirty and

complete. Paisa Ten Only

373 Bore plug having 100 mm height made from M.S.plate with 3 holes at equal distance 4.00 No 782.57 Rupees Seven Hundred

on circumference for nut-bolts type, locking arrangement with nuts-bolts & lock nuts of Eighty Two and Paisa Fifty

standard make etc. complete. Six Only

[b] From 5 mm thick M.S. plate ( For Top also )

ii) Suitable for 200 mm dia pipe

374 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe 4.00 L.S 285.33 Rupees Two Hundred

assembly of tubewell as per IS:2800 (part I). Eighty Five and Paisa Thirty

200 mm dia Two Only

375 Cement grout seal The grout shall be 1:1. The largest size aggregate allowed is 10 mm 4.00 L.S 13,405.73 Rupees Thirteen Thousand

pebbles. The grout will have to be in placed in such a way that the cement sand and Four Hundred Five and

aggregate will not be separated due to water. Any method of doing so will have to be Paisa Seventy Three Only

approved by the architects/ Engineer.

376 Bottom sealing of bore hole as per standard procedure. 4.00 Cumt 6,727.61 Rupees Six Thousand

Seven Hundred Twenty

Seven and Paisa Sixty One

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

377 Gravel packing in tubewell construction in accordance with IS: 4097, including 5.93 Hour 1,615.35 Rupees One Thousand Six

providing gravel fine/ medium/ coarse, in required grading & sizes as per actual Hundred Fifteen and Paisa

requirement, all complete as per direction of Engineer in- charge. Thirty Four Only

378 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to 144.00 L.S 865.76 Rupees Eight Hundred

establish maximum rate of usable water yield without sand content (beyond permissible Sixty Five and Paisa

limit), with required capacity air compressor, running the compressor for required time till Seventy Six Only

well is fully developed, measuring yield of well by “V” notch method or any other

approved method, measuring static level & draw down etc. by step draw down

method, collecting water samples & getting tested in approved laboratory, i/c

disinfection of tubewell, all complete, including hire & labour charges of air compressor,

tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

379 Pumping test of the tubewell by submersible pump of adequate capacity in all districts. 2.00 Rmt 29,425.34 Rupees Twenty Nine

B) D.R. Bore pump test with D.G. Set. Thousand Four Hundred

1) 1st 24 hrs. upto 30 HP Twenty Five and Paisa

Thirty Four Only

380 Manufacture, Supply and delivery of following ISI marked H.D.P.E. Pipes (IS:4984/1985 220.00 No. 395.92 Rupees Three Hundred

with latest amendment) having material Grade PE-80 in approximate 100 mtr. Coil Ninety Five and Paisa

length or as per GWSSB requirement with SS-316 Nipple at both end having 11 TPI Ninety Two Only

threading as per specification, press fitted and bolted having nominal diameter as

under as per detailed Technical Specification. Rates are based on IOCL Resin A Grade

45 GP 004DP44 as on dated 01.12.2017 Rs. 90284/- (Without GST) Rates are Exclusive of

381 Supplying and erecting and commissioning SUBMERCIBLE PUMP capable of discharging 4.00 No. 31,458.47 Rupees Thirty One

542 lit / minute 9.17 HP against a total head of 57.14 M driven by electrical motor as Thousand Four Hundred

specified after reaching exact depth of bore with tools, lubricator etc. comp. as Fifty Eight and Paisa Forty

directed. Seven Only

382 Providing and fixing factory made precast RCC perforated drain covers, having 4.00 No. 1,117.02 Rupees One Thousand

concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm One Hundred Seventeen

dia four no longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 and Paisa Two Only

mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S.

flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

383 Providing C.I. cowl type ventilator with air filter and jali etc. comp. All dia size 240.00 kg 58.58 Rupees Fifty Eight and

Paisa Fifty Eight Only

384 Providing and fixing depth gauge painted on teak wood planks 25 mm/M.S plate 4mm 3.00 No 5,575.20 Rupees Five Thousand

thick with float level indicator sliding wire on standard pullies incl. necessary Five Hundred Seventy Five

arrangement to prevent the swinging etc. comp. with calibration upto 5 mt. height and Paisa Twenty Only

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

385 Constructing cast-in situ RCC diaphragm wall by providing and laying machine batched, machine mixed, 1,276.57 Cum 12,757.31 Rupees Twelve Thousand

self compacting, ready mix reinforced cement concrete, tramie controlled, of M 30 grade concrete as Seven Hundred Fifty Seven

per approved Design Mix manufactured in fully automatic batching plant established on site and

and Paisa Thirty One Only

transported to site of work in transit mixer having continuous agitated mixer including providing and mixing

required admixtures in recommended proportions as per IS : 9103, as approved by the Engineer-in-

charge, for achieving 150- 200mm slump, for diaphragm wall having thickness as per approved structural

design not exceeding 600 mm, in pannels of required depth and lengths as per approved drawing,

including constructing necessary guide walls as required and as specified including boring in all kinds of

soils and rocks, including working in or under water and / or liquid mud, in foul conditions and pumping or

bailing out of water and removing slush, including disposal of earth/ rock / slush etc. for all leads and all

lifts, including preparing, providing and re-circulating bentonite slurry in the trench as and when required

for all depths, including agitating bentonite slurry during trenching etc., providing and fixing stop ends or

form tubes, upto the required depth of diaphragm wall including extracting the same after casting,

including chipping off the bentonite adulterated concrete or unsound concrete up to the cut off level for

obtaining the sound concrete, dressing undulations on the exposed face of diaphragm wall after

excavation by chipping / chiseling etc. including filling the depression/ cavities with sound concrete etc.

complete and as directed by the Engineer-in-charge, including providing recess for bearing plates and

fixing insert boxes for inclined rock anchors etc. complete as per the specifications and approved design

and as directed by the Engineer-in-charge, but excluding the cost of reinforcement and inserts. (rates

include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position the

reinforcement cage in the trench, including the additional cost of welding the reinforcement bars etc.

involved in the work and all other incidental expenditure for completing the work as directed by the

Engineer-in-charge), However, the actual area of the diaphragm wall, correct to two places of decimal,

from design bottom level to the design cut off level (including portion anchored in the rock upto the

design bottom level) only shall be measured for payment.

Excess/less cement used for design mix including the extra cement required for under water concreting is

payable / recoverable separately.

386 Providing, supplying, transporting, handling, unloading, storing, and installing High 50.00 Rmt. 1,845.27 Rupees One Thousand

Density Polyethylene (HDPE) Double Wall Corrugated (DWC) Pipes complete with Eight Hundred Forty Five

matching couplers, EPDM/SBR rubber ring gaskets, fittings, accessories, jointing, testing, and Paisa Twenty Seven

and commissioning, in accordance with the approved drawings, technical Only

specifications, relevant IS standards, and the directions of the Engineer-in-Charge.

387 Electrical Work 235.00 Pt. 200.99 Rupees Two Hundred

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm and Paisa Ninety Nine

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper Only

wires, in below type of pipe to be erected complete with earth continuity and

necessary connection with primary light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete.

388 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 2,800.00 Pt. 582.77 Rupees Five Hundred

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr Eighty Two and Paisa

length , in below type of pipe erected with 6A Modular type switch / bell push & Seventy Seven Only

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

389 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI 912.00 Pt. 810.02 Rupees Eight Hundred Ten

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, and Paisa Two Only

in below type of pipe erected with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and accessories with

earth continuity of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

390 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI 1,160.00 Pt. 612.06 Rupees Six Hundred

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, Twelve and Paisa Six Only

in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories. [I]

For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

391 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI 950.00 Pt. 894.86 Rupees Eight Hundred

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, Ninety Four and Paisa

in below type of pipe erected complete with Modular type switch & 5 pin Plug Eighty Six Only

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories. [II]

For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

392 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI 77.00 Pt. 1,046.36 Rupees One Thousand

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, Forty Six and Paisa Thirty

in below type of pipe erected complete with Modular type switch & 5 pin Plug Six Only

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories. [III]

For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green)

earthing wire from mcb d b board. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

393 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket 1,225.00 Pt. 309.06 Rupees Three Hundred

erected on PVC / Metallic/Wooden box, single mounting base frame covered with Nine and Paisa Six Only

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories Cat-III

394 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 124.00 Pt. 725.18 Rupees Seven Hundred

sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand Twenty Five and Paisa

copper wires erected in below type of pipe with 6A Modular type switches and Eighteen Only

following type of accessories erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

395 Providing following type of Modular Type Accessories mounted with PVC / 4.00 Nos 160.59 Rupees One Hundred

metallic/Wooden box, single mounting base frame covered with textured / Sixty and Paisa Fifty Nine

metallic/white front plate , modules erected with necessary connections as per site Only

situation directed by Engineer In charge.

(4) TV Co-axial Socket outlet Cat-III

396 Providing following type of Modular Type Accessories mounted with PVC / 675.00 Nos 25.25 Rupees Twenty Five and

metallic/Wooden box, single mounting base frame covered with textured / Paisa Twenty Five Only

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge.

(7) Blank Plate Single Cat-III

397 Providing following type of Modular Type Accessories mounted with PVC / 9.00 Nos 210.08 Rupees Two Hundred Ten

metallic/Wooden box, single mounting base frame covered with textured / and Paisa Eight Only

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge.(3) Two Pin/RJ-11 Telephone Socket [B] For Two

398 Providing following type of Modular Type Accessories mounted with PVC / 876.00 Nos 160.59 Rupees One Hundred

metallic/Wooden box, single mounting base frame covered with textured / Sixty and Paisa Fifty Nine

metallic/white front plate , modules erected with necessary connections as per site Only

situation directed by Engineer In charge.(8) Computer RJ-45 socket

399 Providing & Erecting approved make following size of TV Co-axial flexible cable 155.00 Mtr. 39.39 Rupees Thirty Nine and

comprising inner conductor of solid bare copper insulated with Foam PE & Secondary Paisa Thirty Nine Only

conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage

overall sheathed with black PVC insulation.

400 Supplying & erecting approved make LAN cable of following size in existing pipe as per 10,030.00 Mtr. 76.76 Rupees Seventy Six and

direction [D] CAT - 6 e Paisa Seventy Six Only

401 Providing following type of Modular Type Accessories mounted with PVC / 10.00 Nos 71.71 Rupees Seventy One and

metallic/Wooden box, single mounting base frame covered with textured / Paisa Seventy One Only

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge.Decorative call bell Ting-tong box type

volts complete erected

402 Conduits & Pipes 9,055.00 Mtr. 24.24 Rupees Twenty Four and

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size Paisa Twenty Four Only

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

403 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size 12,050.00 Mtr. 33.33 Rupees Thirty Three and

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Paisa Thirty Three Only

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

404 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size 6,910.00 Mtr. 54.54 Rupees Fifty Four and

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Paisa Fifty Four Only

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

405 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, 1,237.00 Mtr. 17.17 Rupees Seventeen and

PVC bushes, Check-nuts etc. complete of following sizes. Paisa Seventeen Only

406 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, 1,013.00 Mtr. 21.21 Rupees Twenty One and

PVC bushes, Check-nuts etc. complete of following sizes. Paisa Twenty One Only

407 Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double- 585.00 Mtr. 31.31 Rupees Thirty One and

locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS Paisa Thirty One Only

with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint

& erected on wall / ceiling of following size . (2) 25 mm

408 Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double- 392.00 Mtr. 36.36 Rupees Thirty Six and

locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS Paisa Thirty Six Only

with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint

& erected on wall / ceiling of following size . (3) 32 mm

409 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, 725.00 Mtr. 428.24 Rupees Four Hundred

chloride rigid material with ignition free and flame proof confirming BS with necessary Twenty Eight and Paisa

end caps Internal and external bend, flat bends, coupler, tee etc..All necessary Twenty Four Only

accessories and measuring of following sizes

(2) 100 mm x 50 mm trunking

410 Mains & Wires 12,600.00 Mtr. 78.78 Rupees Seventy Eight and

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Paisa Seventy Eight Only

Copper conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm (FRLS)

411 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 11,800.00 Mtr. 104.03 Rupees One Hundred

Copper conductor wire in following type of pipe to be erected concealed in /flushed Four and Paisa Three Only

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

412 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 6,700.00 Mtr. 140.39 Rupees One Hundred

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with Forty and Paisa Thirty Nine

2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for Only

earth continuity of following size (FRLS)

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm (FRLS)

413 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 3,410.00 Mtr. 184.83 Rupees One Hundred

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with Eighty Four and Paisa

2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for Eighty Three Only

earth continuity of following size (FRLS)

(A) with medium class Rigid PVC pipe and accessories

b) 2 wire 6 sq. mm. (FRLS)

414 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded 3,210.00 Mtr. 295.93 Rupees Two Hundred

Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with Ninety Five and Paisa

2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for Ninety Three Only

earth continuity of following size (FRLS)

(A) with medium class Rigid PVC pipe and accessories

(c) 2 wire 10 sq. mm (FRLS)

415 Supplying and Providing mains with 4 nos. of 10 sq mm Cu. FRLS PVC insulated flexible 3,412.36 Mtr. 531.26 Rupees Five Hundred

wire with ISI and FIA approval for 650 V/ 1100 V and 2 nos 4 sqmm Cu. FRLS PVC Thirty One and Paisa

insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in Twenty Six Only

40 mm diameter rigid PVC conduit of medium guage having ISI and FIA approval with

all necessary accessories.

(i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

416 Supplying and Providing mains with 4 nos. of 6 sq mm Cu. FRLS PVC insulated flexible 2,700.00 Mtr. 326.23 Rupees Three Hundred

wire with ISI and FIA approval for 650 V/ 1100 V and 2 nos 2.5 sqmm Cu. FRLS PVC Twenty Six and Paisa

insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in Twenty Three Only

40 mm diameter rigid PVC conduit of medium guage having ISI and FIA approval with

all necessary accessories.

417 Providing & erecting Switch board for Computer or electric apparatus consisting of 930.00 NOS 1,133.22 Rupees One Thousand

following modular type accessories mounted with PVC / Metallic concealed/open One Hundred Thirty Three

box with single mounting base frame covered with textured/metallic /white front and Paisa Twenty Two

plate,modules erected with necessary connections as directed Only

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories

418 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 530.00 Mtr. 1,689.73 Rupees One Thousand Six

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Hundred Eighty Nine and

pipe of following size of cables of cables Paisa Seventy Three Only

(j) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)

IT NO. ITEM DESCRIPTION QTY UNIT Rate Rate AMOUNT

In Figure In Word

419 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 526.00 Mtr. 1,401.88 Rupees One Thousand

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Four Hundred One and

pipe of following size of cables of cables Paisa Eighty Eight Only

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

420 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 325.00 Mtr. 1,085.75 Rupees One Thousand

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Eighty Five and Paisa

pipe of following size of cables of cables Seventy Five Only

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

421 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 320.00 Mtr. 877.69 Rupees Eight Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Seventy Seven and Paisa

pipe of following size of cables of cables Sixty Nine Only

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

422 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 540.00 Mtr. 648.42 Rupees Six Hundred Forty

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Eight and Paisa Forty Two

pipe of following size of cables of cables Only

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

423 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 770.00 Mtr. 588.83 Rupees Five Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Eighty Eight and Paisa

pipe of following size of cables of cables Eighty Three Only

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

424 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 595.00 Mtr. 341.38 Rupees Three Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Forty One and Paisa Thirty

pipe of following size of cables of cables Eight Only

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

425 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 1,250.00 Mtr. 264.62 Rupees Two Hundred Sixty

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Four and Paisa Sixty Two

pipe of following size of cables of cables Only

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

426 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid 328.00 Mtr. 183.82 Rupees One Hundred

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Eighty Three and Paisa

trench / pipe of following size of cables Eighty Two Only

B) 4 Core 16 Sq.mm.