Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC HM 324 PHASE IX SAS NAGAR MOHALI PB | L1 | Accepted-AOC Quoted L1 | |
| 2 | L2₹26.7 L+₹98,130 (3.82%)Rejected-AOC 363 39KA HASSANGANJ BAWLI KUMAR COMPANY 363 39 KA HASAN GANJ BAWLI SAADAT GANJ LUCKNOW SAADATGANJ | L2 | Rejected-AOC Quoted L2 | |
| 3 | L3₹28.1 L+₹2.4 L (9.33%)Rejected-AOC 368 PHASE 4 SAS NAGAR MOHALI 160059 PB | MOHALI | SAS NAGAR | PUNJAB | 160059 | L3 | Rejected-AOC Quoted L3 | |
| 4 | L4₹29.2 L+₹3.5 L (13.7%)Rejected-AOC HOUSE NO 3809 SAMRIDHI HOMES PEERMAUSHALA POST DHAKOLI MC ZIRAKPUR DISTT SAS NAGAR PIN 160104 | S A S NAGAR | PUNJAB | 160104 | L4 | Rejected-AOC Quoted L4 | |
| 5 | L5₹30.4 L+₹4.8 L (18.5%)Rejected-AOC 96 SECTOR 16 A CHANDIGARH 160015 | CHANDIGARH | CHANDIGARH | 160015 | L5 | Rejected-AOC Quoted L5 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
24 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Chandigarh
GE AF Chandigarh PIN-160003 C/o 56APO
CERTAIN REPAIR/ REPLACEMENT TO JOINERY WORK, PLASTERING WORKS IN BRAR ENCLAVE, TECHNICAL AREA AND DOMESTIC AREA OF GE (AF) CHANDIGARH
2023_MES_605780_1
GE(AF)/CHD/T-31/2023-24
Open Tender
Civil Works
Item Rate
183 days
Chandigarh
All as per NIT and Tender documents
10 documents required · 10 mandatory
₹500
GE AF Chandigarh
₹60,000
Yes
21 Sept 2023
26 Jun 2023
31 Jul 2023
26 Jun 2023
24 Jul 2023
10 Jul 2023
26 Jun 2023 - 3 Jul 2023
Amount
Taking down carefully aluminium door/ windows chowkhats or frames without taking off shutters from frame and refixing the same after inspecting the parts/ members including minor repairs and removing unserviceable members and replacing as new ones as required complete all ass specified and directed. Note:- Replacement of aluminium section, glass and rubber packing shall be measured and paid separately.
Taking down carefully aluminium shutters of any description exc. 1.00sqm but n. exc. 2.0sqm each and refixing the same after inspecting the parts/ members of doors including minor repairs and removing unserviceable members and replacing with new ones as required complete all as specified and directed. Note:- Replacement of aluminium section, glass and rubber packing shall be measured and paid separately.
Supply only aluminium anodised section of any size, shape and thickness for door, window, partition and the like complete all as specified and directed.
Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each all as specified and directed.
Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4sqm each all as specified and directed.
S&F factory made pressed steel frame of size 125mm x 60mm for doors/ windows with one or more rebates fabricated out of 1.25mm thick MS sheet and treated with one shop coat of red oxide primer including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed.
M&L for cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate filled inside the pressed steel frame and for fixing of hold fasts complete all as specified and directed.
S&F factory made box type steel window with glazing bars dovetailed or welded and fitted with two No. 150mm mild steel tower bolts and steel handle to each shutter and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEAF/ STD-184-2012 sheet 1/3 to 3/3.
S&F factory made box type steel window with two No. 150mm mild steel tower bolts and steel handle to each shutter without glazing bars including flat iron 12mm x 3mm for securing wire mesh, dovetailed or welded and treated with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No. CEAF/ STD-185-2012 sheet 1/2 to 2/2.
S&F mild steel frame work such as grills, gratings etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings and similar work conforming to Fe-290 Grade E-165 quality complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks or stainless steel wire staples or fixed to wooden frame with first class hard wood bead complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to steel frames with stainless steel tacks or stainless steel wire staples or fixed to wooden frame with first class hard wood bead complete all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed by Engineer-in-charge.
S&F sheet glass 4mm thick, ordinary quality glazing with oil putty or wooden bead in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.
S&F figured glass 4mm thick, pin headed type and glazing with oil putty or wooden bead in squares n. exc. 0.5Sqm in each pane complete all as specified and directed.
S&F in opening solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing complete all as specified and directed.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face all as specified and directed.
S&F butt hinges, extruded aluminium alloy, anodised, with galvanised mild steel hinge pin, type C-21,100mm size complete all as specified and directed.
S&F aluminium anodised barrel tower bolts 200mm long of extruded section and fix to wooden or PVC doors complete all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.
S&F factory made flush shutter 35mm thick, with block board core and plywood face panels commercial type on both faces complete all as specified and directed.
S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc complete all as specified and directed.
S&F sliding door bolts 300mm long of extruded sections aluminium alloy, anodised, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy dia of bolt not less than 12mm complete all as specified and directed.
S&F 300mm long ordinary rat rail rod pattern MS door springs including roller and roller plate complete all as specified and directed.
S&F in repairs 300mm long ordinary rat rail rod pattern MS door springs including roller and roller plate complete all as specified and directed.
M&L for preparation of new wooden or wood based surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of steel surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutter of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws complete all as directed by Engineer-in-Charge.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm entre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all complete all as directed by Engineer-in-Charge.
S&F 5.5mm thick tinted glass, rubber packing, glazing strips in aluminium frame at any position and any height including hacking out old broken glass, rubber packing, glazing strips etc. complete all as specified and directed.
S&F 18mm thick toughened high strength sound proof glass cushioning of two layer of glass sheet outer side of 12mm thick and 10mm vacuum and second layer of 6mm thick glass fixed with aluminium glazing clips, rubber neoprene packing, aluminium snap beading, screw etc. complete all as specified and directed.
S&F in repair 75mm long, 04 lever (aluminium) vertical type mortise lock suitable for aluminium door complete all as specified and directed.
S&F in repair 100mm long, 04 lever (brass) vertical type mortice lock suitable for aluminum door complete all as specified and directed.
S&F in repair door closer aluminum (die cast body) hydraulically regulated designation No. 3, universal type suitable for door shutters of 851 to 1000mm in width and between 61 to 80 kgs weight complete all as specified and directed.
S&F in repairs double action floor door spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
Taking down rolling shutter of any description of size not exceeding 20 Sqm each and removal from site to store complete all as specified and directed.
S&F steel rolling shutter without ball bearing with 1.25mm thick laths specified including top hood cover, 50mm anchoring rod, hasp and staple and one shop coat of primer erected in position push, pull or manual type complete all as specified and directed.
Taking down push pull or manual type rolling shutter n. exc. 10Sqm and re-fixing to its original position after cleaning all parts, straightening sliding rails, replacing damaged strips, bottom rails, helical spring as required, greasing/ oiling, servicing for smooth functioning for all parts, including welding etc. complete all as specified and directed. Note:- Replaced parts shall be measured and paid separately.
All as per Ser. Item No. 38.00 above but rolling shutter gear operated type with bevel gear box and cranked handle for smooth function of size exc. 10Sqm but n. exc. 20Sqm complete all as specified and directed.
Supply only steel sheet 75mm wide lath strip 1.00mm thick for rolling shutters including mild steel clips at either ends duly painted with two coats of synthetic enamel paint(shade to match with the existing) over a shop coat of red oxide primer, complete all as specified and directed.
Supply only mild steel spring 75mm to 150mm dia made of high tension steel wire conforming to IS: 4454 having 60 to 80 helical for smooth working condition for rolling shutters complete all as specified and directed.
S&F in repairs mild steel anchoring rod 50mm dia including necessary fixture for rolling shutters complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation /slab/ blankets, any thickness, including cover fillets and removal from site complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC frame complete all as specified, shown in drawing relevant to item No. 8113 to 8115 and as directed.
S&F PVC wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement complete all as specified, shown in drawing relevant to item No. 8113 to 8115 and as directed.
S&F anodised aluminium snap grid frame work for false ceiling all as specified and as directed by Engineer-in-Charge
M&L for 12mm thick perforated particle board/ tiles for insulation and acoustic purposes, 60cm x 60cm in size, fixed with screw to timber framework or with staples on snap grid complete all as specified and directed.
S&F hangers of 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia and 40mm long complete all as specified and directed.
Taking down shutters of any description exc. 1.00sqm and n. exc. 2.00Sqm each and removing from site complete all as specified and directed.
S&F plain fillets square, rectangular or triangular in section of 2nd class hardwood of sectional area exc. 6 & n. exc. 13 Sqcm, clean swan, wrought finished secured with screws complete all as specified and directed.
S&F in repair, continuous (piano) hinges of mild steel, bright finish or electro galvanised, width of flap 30mm (when open) complete all as specified and directed.
S&F continuous (piano) hinges of mild steel, bright finish or electro galvanised, width of flap 30mm (when open) complete all as specified and directed.
S&F hasp and staples, 100mm size, safety type, aluminum anodised with mild steel hinge pin, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repair hasp and staples, 100mm size, safety type, aluminum anodised with mild steel hinge pin, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 40mm dia cupboard knobs fixed with nut, washers/ screws etc. of brass polished, bright finished complete all as specified and directed.
S&F in repair, 40mm dia cupboard knobs fixed with nut, washers/ screws etc. of brass polished, bright finished complete all as specified and directed.
S&F in repairs magnet catcher suitable for kitchen cabinet/ cupboard with steel plate and stainless steel as required complete all as specified and directed.
M&L for post construction anti-termite treatment to wood and wood based material by drilling 150mm to 300mm deep holes 300mm c/c (maximum) apart in concrete/ brick surface surrounding the wooden member at 45⁰ angle and applying emulsion of chemical of PREMISE or PAXTON mixed with water in the ratio of (1:20) by nozzle of spraying machine; total 250ml emulsion of emulsion per hole in 3 to 4 rounds and finally plugging the hole by paste of white cement and pigment mixed with the chemical complete all as specified and as directed by Engineer-in-Charge.
M&L for welding in repairs exc. 2.5cm but n. exc. 5cm in length and thickness of metal n. exc. 6mm complete all as specified and directed.
S&F in repairs drapery rod of stainless steel 25mm dia ribbed/ fancy type including brackets and finals as required complete all as specified and directed.
S&F in repairs 25mm dia PVC coated mild steel drapery rod ribbed/ fancy type including brackets and finials as required complete all as specified and directed.
S&F in repairs 2mm thick fiber glass reinforced translucent (Polycarbonate) corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. fixed with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls complete all as specified and directed.
S&F door seal 50mm wide and 1m in length built in aluminium black plate with nylon brush fixed with screws complete all as specified and directed.
S&F floor door stopper 140mm overall cover plate length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
Taking down shutters of any description exc. 1.00sqm and n. exc. 2.00Sqm each and removing from site complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any description, gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F sheet glass 5.5mm thick, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5Sqm in each pane, complete all as specified and directed.
KUMAR AND COMPANY
Baba Engineers and Contractors
M/s Bhagwati Enterprises
Anil Kumar Gupta
jmv engineers
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .