Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC | ₹15.8 L Quoted ₹17.2 L | L1 | Accepted-AOC L1 and reasonable |
| 2 | L2₹21.3 LRejected-AOC 0001D ATM HOUSE AIR FORCE NEENA THAPA GORAKHPUR UTTAR PRADESH 273008 UDYAM UP 32 0054752 | GORAKHPUR | UTTAR PRADESH | 273008 | ₹21.3 L | L2 | Rejected-AOC Not L1 |
| 3 | L3₹23.1 LRejected-AOC | ₹23.1 L | L3 | Rejected-AOC Not L1 |
| Sl No | Description | Qty | Unit | Mr Madhusudhan Kotarki L1 | om sai enterprises L2 | Siddique constructions L3 |
|---|---|---|---|---|---|---|
| 0.00SCHEDULE OF WORKS | ||||||
| 1.00 | Taking down ceiling fan of sweep 1200/1400mm of any make from any height, carrying out maintenance and safety checking, fixing back in its original position including checking the internal wiring all as specified and as directed.
Note:-
(i) Defective/unserviceable minor spares / accessories like rubber real, clamps, bolts, nuts, washers, safety pin etc will be measured and paid separately as supply only. However, Cost of labour element required for replacing the spares shall be deemed to be included in the unit rate quoted
(ii) Rewinding /overhauling of fans will be measured separately. | 700 | Each Job | 40 ₹28,000 | 100 ₹70,000 | 80 ₹56,000 |
| 2.00 | Supply only Rubber real bushes for ceiling fan of sweep 1200/1400mm | 600 | Each | 12 ₹7,200 | 25 ₹15,000 | 22 ₹13,200 |
| 3.00 | Supply only Safety pins with nuts and bolt with washers for ceiling fan | 600 | Each | 5 ₹3,000 | 5 ₹3,000 | 3 ₹1,800 |
| 4.00 | Material and labour for Oiling and greasing of ceiling fan | 600 | Each | 20 ₹12,000 | 30 ₹18,000 | 32 ₹19,200 |
| 5.00 | Supply only blades of ceiling fan of any size | 250 | Set of 3 | 120 ₹30,000 | 120 ₹30,000 | 150 ₹37,500 |
| 6.00 | Supply only ceiling fan canopies | 600 | Set of 2 | 20 ₹12,000 | 30 ₹18,000 | 20 ₹12,000 |
| 7.00 | Disconnection and removing unserviceable winding from ceiling fan motor of any sweep, cleaning the slots and rewinding same with suitable gauge super enamelled copper winding wire, insulating and heating properly including testing and commissioning complete all as directed. | 700 | Each | 450 ₹3.1 L | 470 ₹3.3 L | 440 ₹3.1 L |
| 8.00 | S&F in repair fan bearing of suitable size for ceiling fan 1200mm /1400 mm sweep | 600 | Each | 60 ₹36,000 | 90 ₹54,000 | 100 ₹60,000 |
| 9.00 | S&F in repair fan bush of suitable size for ceiling fan 1200mm /1400 mm sweep | 700 | Each | 20 ₹14,000 | 30 ₹21,000 | 35 ₹24,500 |
Updated dates
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
2 Feb 2026, 6:00 pmClosed
GE (AF) Bidar
Garrison Engineer (Air Force) Bidar, Military Engineer Services, Air Force Station Bidar, Bidar-585401
REPAIRS AND MAINT TO SUMMER APPLIANCES, SOLAR WATER HEATERS / ELECTRIC GEYSERS AND ALLIED WORK AT AFS BIDAR
2026_MES_747277_1
CA NO. GE(AF)/BID/TOKEN/53 OF 2025-2026 8204/E8
Open Tender
Electrical and Maintenance Works
270 days
Bidar
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Bidar
₹40,000
Yes
12 Mar 2026
5 Jan 2026
9 Feb 2026
5 Jan 2026
2 Feb 2026
19 Jan 2026
5 Jan 2026 - 18 Jan 2026
Taking down ceiling fan of sweep 1200/1400mm of any make from any height, carrying out maintenance and safety checking, fixing back in its original position including checking the internal wiring all as specified and as directed. Note:- (i) Defective/unserviceable minor spares / accessories like rubber real, clamps, bolts, nuts, washers, safety pin etc will be measured and paid separately as supply only. However, Cost of labour element required for replacing the spares shall be deemed to be included in the unit rate quoted (ii) Rewinding /overhauling of fans will be measured separately.
Supply only Rubber real bushes for ceiling fan of sweep 1200/1400mm
Supply only Safety pins with nuts and bolt with washers for ceiling fan
Material and labour for Oiling and greasing of ceiling fan
Supply only blades of ceiling fan of any size
Supply only ceiling fan canopies
Disconnection and removing unserviceable winding from ceiling fan motor of any sweep, cleaning the slots and rewinding same with suitable gauge super enamelled copper winding wire, insulating and heating properly including testing and commissioning complete all as directed.
S&F in repair fan bearing of suitable size for ceiling fan 1200mm /1400 mm sweep
S&F in repair fan bush of suitable size for ceiling fan 1200mm /1400 mm sweep
Taking down of wall mounted fan and removing the unserviceable winding from the motor of wall mounted fan of sweep 630/450/400mm, cleaning the slots and rewinding the same with suitable gauge super enamelled copper winding wire, insulating and heating properly including testing and commissioning complete all as directed.
S&F in repairs bearing of suitable size for wall mounted fan of 630/450/400mm sweep.
S&F in repairs fan bush of suitable size for wall mounted fan of 630/450/400mm sweep
Taking down of exhaust fan and removing the unserviceable winding from the motor of exhaust fan of sweep 450/300mm, cleaning the slots and rewinding the same with suitable gauge super enamelled copper winding wire, insulating and heating properly including testing and commissioning complete all as directed.
S&F in repairs fan bearing of suitable size for exhaust fan of 450 mm sweep including greasing.
S&F in repairs fan bearing of suitable size for exhaust fan of 300 mm sweep including greasing.
S&F in repairs fan bush of suitable size for exhaust fan of 450 mm sweep
S&F in repairs fan bush of suitable size for exhaust fan of 300 mm sweep
S&F in repairs/replacement of exhaust fan made of sturdy engineering plastic with BLDC motor having technical specifications of 220-240 V, size 200mm (8 inch) Silent operation coupled with high air delivery of 1150 CMM with 1600 RPM, AC supply all as specified and as directed by Engineer-in-Charge.
S&F in repairs/replacement including taking down of exhaust fan made of sturdy engineering plastic with BLDC motor having technical specifications of 220-240 V, size 230mm (10 inch) Silent operation coupled with high air delivery of 1150 CMM with 1300 RPM, AC supply all as specified and as directed by Engineer-in-Charge.
S&F in repairs the 2.5 MFD capacity ceiling /exhaust fan condensers
S&F in repairs the 4 MFD capacity ceiling /exhaust fan condensers
S & F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as directed.
S&F in repairs metal louvers of suitable size for exhaust fan of 450 mm sweep
S&F in repairs metal louvers of suitable size for exhaust fan of 300 mm sweep
Supply and replacement of down rod of 2 to 3 feet length for ceiling fan with 15mm dia GI pipe medium grade, screwed and drilled with clamps rubber real, nut, bolts, and safety pin etc including painting complete all as directed.
Taking down carefully storage water heater (geyser) 25 Litre /35 litre /50 Litre from the location by removing the electrical connection and water connections, shifted to work shop / MES Store as directed. Note :- Replacement of defective spares will be measured and paid under relevant items mentioned here in after separately.
Supply and replacement of heating coil 1500 W including rubber washer/packing suitable for existing geyser of any type/model and make as per PS of contract complete all as specified and directed by Engr- in -Charge.
Supply and replacement of heating coil 2000 W including rubber washer/packing suitable for existing geyser of any type/ model and make as per PS of contract complete all as specified and directed by Engr- in -Charge.
Supply and replacement of thermostat range of 30-80 degree suitable for geyser of 25/35/50 litres capacity as per existing match and model complete all as specified.
Brazing of inner copper tank of Geysers using good quality of copper electrode blow lamp welding process, brazing length not exceeding 10 cm complete all as directed.
Supply and replacement of glass wool for insulator of Geysers any capacity and any make complete all as directed.
Supply and replacement of pressure relief valve CP brass suitable for 15mm dia pipe
Supply and replacement of Non return valve brass suitable for 15mm dia
Supply and replacement of indicator lamp suitable for storage water heater (geyser) 25 / 35 / 50 Litres
Supply and replacement indoor assembly of any type made out of brass with inlet and out let and fixing plate complete including Gasket and nut blots as required at site for 25 Litre capacity Geyser, any make complete all as directed.
Supply and replacement of indoor assembly any type made out of brass with inlet and out let and fixing plate complete including Gasket and nut blots as required at site for 35/50 Litre capacity Geyser, any make complete all as directed.
Refixing of storage water heater(geyser) 25 /35 /50 Litre capacity, shifted from work shop / MES Store, connecting up electrical and water connections including provision of 3 core 7/20 copper cable and testing as specified and as directed.
Supply and replacement of PVC connection 45 cm long both end brass nut suitable for hot / cold water supply and screw down 15mm GI pipe.
M&L for grouting 4 Nos of M12 X100mm mild steel bolt in stone /brick masonry wall and making good the surface to match with the existing surface in cement mortar 1:4 suitable for hanging geysers complete all as directed.
Over hauling & servicing the solar water heater 100/200 litre capacity by repair / replacing the spares and blocks in the solar cells removed by the acid cleaning and damaged solar cells to be replaced as directed. Note: Supply and replacement of spares will be measured and paid separately.
Supply and replacement of Anode for solar water heater 100/200 Litre capacity
Supply and replacement of solar gasket as per existing type.
S&F in repairs Stop valves, 20 mm Bore dia of pipe, fancy type, chromium plated cast copper alloy, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
Supply and replacement of MCB SPN 32 amps 240 V, 10 KA , 'C' curve type
Supply and replacement of industrial type metal clad plug top & socket single pole and a natural link earth enclosure with MCB SP 20 Amp complete.
Disconnection and repair the unserviceable heat exchanger along with its connected items and provision of new solar water heater collector (heat exchanger) for 100 litres solar water heater of same size and capacity complete connecting up of connections complete all as specified and as directed.
Disconnection and repair the unserviceable heat exchanger along with its connected items and provision of new solar water heater collector (heat exchanger) for 200 litres solar water heater of same size and capacity complete connecting up of connections complete all as specified and as directed.
Repair of solar water tank of stainless steel along with puff insulation of capacity 100 Litres with electrical heating backup of 2 KW including taking down existing all as specified and as directed.
Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and as directed.
Repair of solar water tank of stainless steel along with puff insulation of capacity 200 Litres with electrical heating backup of 2 KW including taking down existing all as specified and as directed.
S&F in replacement in trench / floor / wall etc pipes galvanised iron "Medium Grade " ISI marked with all running fittings of size 20 mm bore complete all as specified and as directed
Supply, Jointing, testing and laying in trench / floor / wall etc pipes galvanised iron "Medium Grade " ISI marked with all running fittings of size 15 mm bore complete all as specified and as directed
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tender8204.pdf
Tender Documents • 0.81 MB
BOQ_836817.xls
BOQ • 0.64 MB
Download all tender documents and submit your bid