EI work for the Establishment of blood bank of old isolation ward at Santipur SGH SITC of 40 KVA DG set and allied EI work with foundation and shed

Amount

SITC of 40 KVA 415V, 3 Phase DG Set comprising of Cummins make-engineand 40 KVA satmford make- alternator mounted on acommon base complet with :- 1) Fuel tank 2) Battery and Lead 3) Jakson STD AMF control Pannel 4) Residential Silencer 5) First fill of lube oil 6) Mechanical governor 7) Acoustic Enclosure :-

Making insulation by 2" glass wool including netting arrangement and covered with aluminium clading as per direction of the EIC. S & F 100 mm. dia exhaust pipe.

S&F rain protection canopy on the exhaust.

Filling of HSD oil for initial refill with transportation.

S& laying 2.5 sq. mm. 10 core multi core multistrand PVC insulated flexible Cu cable in UPVC / GI pipe from DG to separate AMF panel.

S& delivery of 150 ltrs. Capacity heavy gauge MS sheet barrel.

Supply & delivery of best quality oil motor pump set with 1" dia PVC flexible pipe (12' ft. approx.)

S&F 50mm dia flexible spiral PVC pipe on CC foundation for cable entry

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make -Gloster/KEI/Havells as approved by E.I.C] 4 Core 70 Sqmm

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting [ 2(d)/ F- 1 ]

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed [ 1(b)/ F- 2 ]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings as per GS 25 mm dia [11(a)/F-6]

Supplying and fixing compression type gland complete with brassgland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC armoured cables as below : 4 Core 70 Sq. mm [ 7(c)/F4]

Finishing the end of following XLPE/PVC armoured cablesby crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 Core 70 Sq. mm [ 7(d)/F4 & 8(b- xvii) /F5]

S & D of Godrej Navtal 7-liver lock with duplicate keys for locking the DG Shed

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS [ 2(a)/G-1]

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS No.-6 SWG [5(a)(i)/G-2]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS [4(a)/G-2]

Excavation of soil for installation of Earth lectrode and filling & ramming.(a) For Soft Soil [1(a)/G1]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [3a/G2]

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [5(d)/G-3)

Supply & Fixing heat sinkable sleevs for 20mmx3mm GI strip from earth electrode to earth bus required for neutral earthing as per direction of E.I.C.

LOKNATH ENGINEERING (BID ID -6226517)

T.D.K. ENTERPRISE (BID ID -6238650)