PROVISION OF FALSE CEILING AND CERTAIN IMPROVEMENT WORKS IN IT ROOM and WORK STATIONS IN COAST GUARD DISTRICT HEADQUARTERS NO 6 AP VISAKHAPATNAMUNDER AGE I CG VIZAG

Amount

S & F including fabrication, in position, false ceiling comprising of grid system of Armstrong/rockstrength or its equivalent for frame work with GI powder coated angle wall runners of size 19 x19 mm, cross Tee of size 24 x 24 mm & main Tee of size 34 x 24 mm at 600 mm c/c to form grid of 600X600mmx 8/9mm thick gypsum ceiling tiles surface laminated with PVC and back side coated with aluminium foil of approved designer false ceiling shall be suspended from roofs on main runners @ 0.9M c/c by means of suitable fasteners 4 mm GI wire with adjustable cleats of 'J' hooks including making provn of housing light fitting etc all complete including cost of materials and labour, T&P etc. complete all as specified and as directed.

M & L for Pre-laminated particle board 18/19mm thick, interior grade, pre-laminated one side with decorative choice laminations and other side balancing white laminations, fixed with nails/screws to timber frame work as in cupboard/shelves/pelmet boxes including polish finish, with Concealed/auto hinges, magnetic catchers, locks, SS handles complete with all hardware used as per site requirement and all as directed by Engineer-in-Charge. Note :- Unit rate quoted shall be deemed to include for cost of all material & labour and no other item shall be measured and paid separately. Make : Greenply Industries [Ply & Board Division] / Kitply / Anchor / Novapan or equivalent in make specified in PS.

M & L for double layered decorative false ceiling grid comprising of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long including Gypsum borad of 12 mm thick in ceiling and including two coats of plastic emulsion paint over a coat of alkali resistant primer and two coats cement based wall care putty and including dismantling of old ceiling and lilght fittings of any type in any position complete all as per manufacturers' instructions and complete all as specified and as directed.

Taking down chowkats or frames with shtters (Without taking off shutters from the frames) of any description not exceeding 1.5 Sq.m each complete all as specified and as directed.

Taking down chowkats or frames with shtters (Without taking off shutters from the frames) of any description exceeding 1.5 Sq.m each complete all as specified and directed.

S & F Factory made UPVC white colour sliding window three track made of extrded profiles with wall thickness of 2.3mm+/-0.2mm. Window profile with hollow section with multi chmber. Frame (112mm*52mm), sliding sash (42mm+67mm), sliding mesh sash (42mm+57mm), sliding interlock (One vertical length in each shutters) (45.50mmx28mm). Glazing bead (24.50mm*16mm) will be mitred cut and fusion welded at all corneres including railing of holes for fixing hardware and drainage of water of etc. Making arrangement for fixing of hardware EPDM gascade 1.2+/-0.2mm thick galvanized steel frame (30mm*18mm) 2Nos, Sliding sash (30mm*18mm), Sliding mesh sash (26mm*10mm) profile to inserted in required profile, frame will be fixed to wall with 8mm*100mm long fastneres. Hardware (touch lock of zink alloyed (white powder coated), teel roller system, stainnless steel wire cloth of 0.36 mm nominal dia of wire and avg width of aperature 1.40mm and required accessories). To be provided with proper operative and locking hardware mechanism, frame to be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up gap between frame and wall to make leak proof area exceeding 2.0 sqm complete all as specifed and as per Manufacturer instructions. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. Make : Sintex India Ltd. / Polywood / Rajashri Plastiwood Ltd. / Marino / Hindopan or equivalent in make specified in PS.

S & F in repairs 12 mm thick toughened & frosted glass for glass partition/door fixed with necessary screws, sealent , stainless steel patch fitting etc complete with all stainless steel builders hardware used as per site requirement and all as directed by Engineer-in-Charge. Note :- Unit rate quoted to be deemed to include for cost of all material & labour and no other item shall be measured and paid separately. Make : Saint Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan Pilkington Glass or equivalent in make specified in PS.

Demolition of brick masonry including all quoins arches, pillars etc built in cement mortar complete all as specified and as directed.

M&L for Brickwork with flyash bricks, straight or curved on plan exc 6m mean radius in built in cement mortar 1:6.complete all as specified and as directed.

M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2 Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed .

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including mixing with liquid WPC all as per manufacturers instructions complete all as specified and as directed. (Note :- The cost of Liquid WPC shall be deemed to be inclusive in the rate quoted by the contractor)

Dismantling of stone slab and tiles of any type , any description or thickness laid bedded and pointed in any mortar as in floors, aprons etc. complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11 Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match, including screed bed layer of 15 mm thick in cement mortar 1:6 complete all as specified and as directed. Make : Spartek / Johnson / Kajaria / Somany / Orient / Cera

M & L for Glazed coloured and cereamic tiles in vertical surfaces 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10 mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces complete all as specified and as directed. Make : Spartek / Johnson / Kajaria / Somany / Orient / Cera

M & L for Granite stone slabs of 18 to 20 mm thick as in floors and treads of steps / Counter Tops for wash basins etc. including making holes and rounding exposed edges, with machine cut edges, rubbed and pre-polished to smooth mirror finish all to required sizes, granite stone slabs shall be of any colour / shade, design / pattern as directed, set and bedded with grey cement [slurry] and jointed and pointed with white cement slurry mixed with a admixture of pigment to match shade of granite slabs including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.

M&L for 16-18 mm thick prepolished marble stone (udaypur green or any colour) as in floors and treads of steps / Counter Tops for wash basins etc. including making holes and rounding exposed edges, with machine cut edges, rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of any colour / shade, design / pattern as directed, set and bedded with grey cement [slurry] and jointed and pointed with white cement slurry mixed with a admixture of pigment to match shade of granite slabs including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and as directed..

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceilling or laid in floors in short lengths complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

S&F in repair stop valve 15 mm, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed. Make: M/s Hindware / Orient / Seiko / Dripless/Jaquar

S&F in repairs stainless steel gratings 125 mm dia round fixed on floors/ nahani traps fixed with cement mortar complete all as specified and as directed.

S&F Vitreous china wash hand basin white of size 500 x 450 mm including brackets, pillar taps, waste pipe, PVC connection, stop valve etc. complete all as specified and as directed. Make : M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F in repairs Health faucet (ABS Body) with 8 mm dia 1000 mm long flexible tube (Stainless steel covered) alongwith wall hook 5 mm bore, chromium plated 2 way bib cock 15 mm dia with wall flange 50 mm to 65 mm long complete all as specified and as directed. Make: Jaquar / Plumber / Parko / Jal

S&F in repairs Vitreous China Wash Down Water Closet (EWC) [Pedestal pattern], White, including 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe with PVC connection and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete. Make : M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F Vitreous china urinal flat back large of size 590 x 390 x 375 mm (minimum) white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2) securing urinals to wall with 60 mm long brass screws including flush pipe & waste pipe complete all as specifed and as directed. Make : M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as directed.

S&F Stainless steel towel rail 600 mm long fixed with & including chromium plated brass screws and wooden/plastic cleats ( minimum wt 190 gms) complete all as specified and as directed.

S&F brass chromium plated toilet paper holder with flap omplete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as per specification & drawing complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed. Make for Item No. 29 & 30 : Kumar Arch Tech Pvt. Ltd / Sintex India Ltd. / Polywood / Rajashri Plastiwood Ltd. / Marino / Hindopan

M & L for Anodised Aluminium Powder Coated [Minimum thickness of powder coating 50 Micron thick ] Sections for partitions, window, ventilator and door with frame and shutters fully or partly glazed, sliding / openable / fixed with panel inserts of pre-laminated particle board, 4 mm thick sheet glass/wire mesh including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts; the size of aluminium sections shall be all as specified in relevant IS code and SSR Part-I. [Notes: (i) Supply and fixing of panel inserts of glass/ particle board/ gauze will be measured and paid separately. (ii) Weight of aluminium sections only shall be accounted for payment purpose. However unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as handles, butt hinges, tower bolts . (iii) Weight of aluminium handles, butt hinges & tower bolts shall be measured and paid separately. Make:Jindal / Hindalco / Indalco

M & L for powder coated aluminum decorative grill/chequered mesh of size 75 mm x 75 mm including 'U' channel etc. complete all as specified and as directed.

S & F 4 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed. Make: Saint Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan.

S & F 9 mm thick Pre-laminated particle board, interior grade, prelaminated both side with decorative face veneers on both faces, fixed to aluminum door/window shutters and aluminium partition complete all as specified and as directed. Make : Greenply Industries [Ply & Board Division] / Kitply / Anchor / Novapan or equivalent in make specified in PS.

S&F Alluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with old / new wooden beadings complete all as specified and as directed.

S&F 100 mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and as directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F door closer hydraulically regulated designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg of aluminium (Die cast body) complete all as specified and as directed.

S & F brass Mortice lock of Godrej Make, vertical type, 4 lever of size 75mm complete all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. Make : Godrej / Everite / Priya / Hardwin / Doorset

Complete removal of existing treatment and applying two coats of cement based wall care putty on walls / ceilings to obtain a smooth surface including making good any undulations on the surfaces complete upto three storey building ( Note : Rate shall be included for necessary scaffolding and safety measures where required at site) complete all as specified and as directed . Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson.

M & L for Preparation of new/old plastered surfaces of ceilings or false ceiling surfaces of any description and girth and, not otherwise described in any location and applying one coat of plastic emulsion paint over a coat of approved primer complete all as specified and as directed . Make : Asian / Nerolac / Berger ( All 1st quality)

M & L for Preparation of new/old plastered surfaces of walls of any description and girth and, not otherwise described in any location and applying two coats of plastic emulsion paint over a coat of approved primer complete all as specified and as directed . Make : Asian / Nerolac / Berger ( All 1st quality)

M & L for Modular concealed point wiring on wall and surface wiring on ceiling/roof/truss/false ceiling with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized Modular sunken boxes made out of MS sheet of standard thickness with earth dolly and crown plate/grid plate and cover plate for fixing of modular switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with captive screw including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of paris/ Putty or distemper / colour wash with same existing colour surfaces all as specified and as directed by Engineer-in-Charge for the following :- For one light, fan, call bell, 5 Amp independent socket point controlled by one switch.

Ditto all as per item No 45 here-in-before but for power point wiring with 4.0 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor,multi stranded 1100 volt grade cable as continuous earth lead including provision of Modular switches and sockets 5 Amps qty 02 Nos and Modular switches and sockets 15 Amps qty 01 Nos , 240 Volts on the same board. Note : Switch & socket will be measured and paid separately

All as per item No 45 here-in-before but for power point wiring with 4 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable as continuous earth lead complete all as specified and as directed.

S & F Modular switch paino flush button, single pole one way, 5 Amps, 230 Volts complete all as specified and as directed. Make : Legrand / Indo Asian/Anchor [Roma]

S & F Modular Switch paino flush button, single pole one way, 16 Amps, 230 Volts complete all as specified and as directed. Make : Legrand / Indo Asian/Anchor [Roma]

S & F Modular Switch socket outlet 3 pin, 5 Amps, 230 Volts, flush type complete all as specified and as directed. Make : Legrand / Indo Asian/Anchor [Roma]

S & F Modular switch socket outlet multipurpose 3 pin, 15 Amps and 1 pin 5 Amps, flush type controlled by one switch complete all as specified and as directed. Make : Legrand / Indo Asian/Anchor [Roma]

S&F Electronic Socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified.

S & F ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified.

S&F Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed. Make : Legrand /L & T / Schnieder / Havells / C & S / HPL / Indo Asian.

S&F in repairs, testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having B-curve characteristics connected with suitable lugs complete all as specified and as directed.. Make : Legrand /L & T / Schnieder / Havells / C & S / HPL / Indo Asian.

S&F in repairs, testing and commissioning of MCB SPN 240 volt 16 Amp to 32 amp 10 KA capacity having B-curve characteristics connected with suitable lugs complete all as specified and as directed. Make : Legrand /L & T / Schnieder / Havells / C & S / HPL / Indo Asian.

M&L for Sub main wiring with two single core PVC-FRLS insulated unsheathed multistranded copper conductor cable of size 4 sqmm drawn in rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 25 mm including all conduit fittings like bend, elbow ,with 2.5 Sqmm PVC-FRLS insulated unsheathed multistranded copper conductor as a continuous earth wire complete all as specified and as diretced. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length Make of Cable : Havells / Finolex / KEI / Polycab

S & F in repairs for reccessed type 36 Watt 2 x 2 LED luminaire with housing made of 0.6 mm epoxy polyster power quoted CRCA sheet complete with electronic driver and pre-wired with copper wire complete with hanging arrangements complete all as specified and as directed. Make : Philips Cat No. RC383B LED36S - 6500 PSU OD or equivalent in make specified in PS.

M & L for Energy saver LED Bright batten light fitting 18-22 watt, 230 Volts Integrated design including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting old unserviceable bracket with sketch fitting complete all all as specified and as directed. Make : Philips Cat No. BN021CLED20SPSU CW GR S2 or equivalent in Make specified in PS

JAHNAVI ASSOCIATES

SRI BALAJEE CONSTRUCTIONS

RAVI VARMA JAMPANA

GOLLAVILLI RAJANI KUMAR

venkateswara constructions