Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹55,000
Closing Date
20 Jul 2026, 9:30 pm
Karnataka Industrial Areas Development Board
Repairs & Renovation of Existing Record & Store Room, Providing Furniture to the Zonal Office, Construction of New Record Room in the premises of KIADB Zonal Office Dharwad District.
KIADB/2026-27/OW/WORK_INDENT466
KIADB/2026-27/OW/WORK_INDENT466
Reserved
Other Works
KIADB Head Office Bangalore
3 documents required · 3 mandatory
Executed in any one year, the following minimum quantities of work: (Usually 50% of the Peak annual rate of contraction) Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government/Public Sectors/ Government Undertaking Organizations. (1) Earthwork Excavation : 11.00 Cum (2) PCC/RCC : 70.00 Cum (3) TMT Steel : 1 Tonne (4) Plastering : 147 Sqm.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (A x N x 5 - B), Where, A: Maximum value of Civil Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 02 months
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) (Financial Turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the financial Year in which the tenders are invited.)(a)Achieved in at least One financial years an average financial turnover (Civil Contract works only) of Rs.55.00 lakhs. (usually not less than the estimated annual payments under this contract for works costing upto and Rs.100 lakhs)
To qualify for award of this contract, each Tenderer in its/his name should have in the last five years period i.e. (2021-22 to 2025-26) (Financial Turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the financial Year in which the tenders are invited.)(b)Mandating satisfactory completion as a prime contractor for at least any one civil work to an extent of 25% of the amount put to tender (i.e., Rs.13.75 lakhs).
Each Tenderer should further demonstrate:liquid assets and /or availability of credit facilities of not less than Rs.16.50 lakhs (Credit lines/letter of credit/certificates from Nationalized Bank/Scheduled Bank (as per RBI Guidelines) not less than 30% of the amount put to tender for meeting the fund requirement etc).
₹1,380
₹55,000
30 Jun 2026
30 Jun 2026
21 Jul 2026
7 Jul 2026
Repairs & Renovation of Existing Record & Store Room, Providing Furniture to the Zonal Office, Construction of New Record Room in the premises of KIADB Zonal Office Dharwad District.
Demolishing brick work manually/ by mechanical means including stackingof serviceable material and disposal of unserviceable material to the appropriate disposal area complete with all lead and lift e...
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area complete with all lead and lift etc, as per specification and as per di...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area complete with all lead ...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall includi...
Providing and fixing precoated galvanised iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m...
Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Providing and laying Cement concrete pavement with 1:2:4 for commercial& residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size,...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer complete with all lead and l...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing and laying Vitrified tiles in different sizes (thickness to bespecified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufactur...
Aluminum tower bolts complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge.
Anodised Aluminium butt hinges 100x75x4 mm complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge.
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Louvered ventilator upvc complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge.
Providing Salwood frames of doors, windows, clerestory windows, entilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side cl...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an ev...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mount...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and emoving scaffolding, including ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge.
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Demolishing brick work manually/ by mechanical means including stackingof serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-c...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area complete with all lead and lift etc, as per specification and as per directed ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution l...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off cornerswherever required smooth rendering, providing and removin...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with all ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Providing and laying Vitrified tiles in different sizes (thickness to bespecified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufactur...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, wit...
Providing Salwood frames of doors, windows, clerestory windows, entilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side cl...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, wit...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residentia...
Wooden Rack : (Teak Wood) Of size 6' x 6' x 20''. Made out of teak wood frame of section2.25"x2.25"x 6 Nos and supporting patties of thickness 3"x1.25". Panel to be made out of 12mmplywood with lamina...
Computer Work Station of size 4' x 2' per user : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB (Action Tesa or Century brand). Each work stati...
Wardrobe : Made out of 18mm OSR PLPB ( Actiontesa or Century brand) /Ply with lamination.(One side raw Prelaminated particle board) on three sides and back of 12mm PLPB. Inner design should have drawe...
Wooden Partition: Frame made of 12 mm BWR Plywood of standared quality . The frame to be covered by 8mm BWR Ply on both sides. And finished with 1 mm Laminated on both sides. Total thickenss of the pa...
Peacock Chair : (Standard company) Seat, and Back half cushion complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge.
Teak Wood Revolving Chair : Chair upper construction seasoned teak wood with melomon polish, Stain less steel 5 caster wheel legs, Hydraulic height adjustment. The Chair shall be neatly finished and p...
Office Table : Of size 4'x2.5'. Made out of 12/18 mm MDF one key board and 3 drawers on the right side . Table to be covered with 1mm laminate wherever visible. Hardware of the drawer should be telesc...
Teak Wood Table : Of size 7' X 3' Laminated Top all patties below the top to be of 4”x1.25”. Leg size 2.25”x2.25”. One side 2(or 3) drawers and another side 1 cabinet with shelf. Table 3 side ...
Computer Table: Of size 3' x 2' made out of PLPB ( Action Tesa or Century brand) Table should consist of 1 Drawer with lock on right side and 1 keyboard . Table should be provided with 12" Modesty pan...
Teak Wood Executive Table : Laminated Top of size 6' X 2.5' or 6'x3', all patties below the top to be of 4”x1.25”. Leg size 2.25”x2.25”. One side 2(or 3) drawers and another side 1 cabinet wit...
Teak Wood Side Teapoy : Size 1.3/4' x1.3/4 ' x1.5' made out of 2"x2" legs 2"x1.1/4" and 3"x1.1/4" side bars. Top with 8mm glass & reapers shelf with polish. complete with all lead and lift etc, as per...
Teak Wood Nagin Teapoy : Of size 3'x2'. Made out of Teak Wood leg size 3"x3" with carving. Top glass frame of size 3"x1.1/4" & 2"x 1.5" with 8mm tinted glass. Bottom magzine shelf required with 1.5'x3...
Providing Almirah including Transportation
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document.pdf
Tender Document • 0.85 MB
Download all tender documents and submit your bid