RRD of LIS Boun Roda in Tehsil Palampur Distt. Kangra (HP) (SH Construction of Rope way crossing of 40 mm dia rising main to village Roan in Moul Khad)

Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/ wedging out of rock (where blasting prohibited) saturated soil stacking the excavated earth within all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts including uprooting of trees dressing of beds, and sides and preparation of sub-grade, restoration of unmetalled/ metalled/ paved surfaces to its original condition including soring, strutting, timbering and dewatering where ever houses, fixing caution boards, crossing over trenches and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in Foundation and Plinth Complete in all respect as per direction of Engineer in Charge with in all Leads & Lifts.

Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (One cement:one & half sand:three graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-.

Wall any thickness but not les than 0.10 mtrs thickness attached pillastrs,buttresses,plinth and string courses etc.from top of foundation level upto floor two level .

Providing tor steel reinforcement for RCC. Work including bending, binding and placing in position complete upto floor two level in all leads and lifts.

Supplying hosing & straching and holding in position to specdified steel wire rops for suspension bridge as per IS code 2266 (2002) with minimum breakin forec corresponding to rope grade 1960 ( CWR) including guy ropes etc i/c fixing at site complete in all respect as per direction of Engineer in charge with in all leads and lifts.

Steel work welded in built up section ,trusses & frame work i/c cutting hoisting ,fixing in position & applying a priming coat of red lead paint in grating ,framed guard ,bars, ladder, railing, bracket & similar work .complete in all respect as per direction of Engineer in charge with in all leads and lifts