Dyuthi II Summer Scheme 2025 Package 2 - Design, Manufacture, Supply, Erection, Testing and Commissioning of 11kV HT Aerial Bunched cable at different locations under Electrical Circle, Alappuzha on TURNKEY basis

Material

Aerial Bunched Cable HT 3x120 + 1x95 sq.mm (Insulated Messenger)

Aerial Bunched Cable HT 3x150 + 1x120 sq.mm (Insulated Messenger)

Anchoring /Dead end Clamp Assembly for HT AB Cables up to 120 sq.mm

Anchoring /Dead end Clamp Assembly for HT AB Cables up to 150 sq.mm (Insulated messanger 95 to 120 sq mm)

Cable Tie UV Plastic Heavy Duty 500 mm Length

End Termination Kit (3 Nos) Heat Shrinkable -for HT ABC 150 Sq.mm

Heat Shrinkable Termination Kit (3 Nos) for 120 Sq.mm Three phase Aerial Bunched Cable

MVT Kit for HT ABC (1 No.)

Stainless steel Buckles [20.5 mm x 1.5 mm; thickness 1.2 mm]

Stainless Steel Strap [20 mm x 0.7 mm]

Suspension Clamp Assembly for HT AB Cables up to 120 sq.mm

Suspension Clamp Assembly for HT AB Cables up to 150 sq.mm

Labour

Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable

Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Fitting 6 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Erecting one 63kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Providing one Driven Earth using GI earth pipe at standard distance away from the pole/structure in loose soil.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Fitting one set AB switch and giving connection

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting one additional HT pin with insulator

Insertion of one HT PSC pole in existing HT/LT line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Providing Stay for LT poles incl. digging & back filling pit.

Providing Strut using LT PSC pole incl. digging & back filling pit.

Stringing one km LT Sph 2 wire line (Rabbit) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Stringing one km LT 3ph 4 wire line (Rabbit for Ph, Weasel for N) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Stringing one km LT 3ph 5 wire line (Rabbit for Ph and Weasel for N&St.main) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Replacing/inserting HT Stay insulator on the existing stay.

Drilling hole of various sizes on existing Channel/Cross Arm.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling one Channel cross arm from existing DP structure, and bringing back to section store.

Dismantling (without damage) one AB switch from existing structure and bringing back to section store.

Dismantling one HT pin insulator with pin and bring back to section store.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling (without damage) one km LT Sph 2 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls.

Dismantling one section fuse from distribution box

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading one Transformer (upto and incl. 160kVA) from ground to vehicle incl. conveyance upto 25m.

Dismantling one Transformer upto 160kVA from structure and loading to vehicle incl. disconnecting HT/LT/Earth connections.

Dismantling one Transformer (upto and incl. 160kVA) from existing structure to ground.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.

Transporting 63/100/160kVA Transformer by Country boat/Vallam upto 6km incl. loading, unloading and hire charges.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Stringing of 11 kV Aerial bunched cable of size 3 x 150 + 1 x 120 sqmm with bare/insulated Messenger through existing poles

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Erection of suspension clamp for 11KV ABC of any size

Providing Cable Tie

Installing One No. Insulation piercing connector of size Main :16 to 95 ,Tap:1.5 to 16 Sq.mm

Installation of Insulation piercing connector for main to service line main :16-95 sqmm, Tap : 4-35 sqmm

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Errection and commissining of street light metering with timer

Dismantling (without damage) one set (3 No) 11 KV LA and giving connections excluding earthing

Dismantling (without damage) one set (3 No) 11 kV DO Fuse including connection.

Dismantling (without damage) Street Light Control Box with meter

Fitting and erecting one HT PSC pole in position without V cross arm and F clamp including digging and back filling pit,drawing earth leads

Fitting and erecting one HT A pole in position without V cross arm including digging and back filling pit,drawing earth leads