GENERAL-Govt. L P School, KeezhmuriGeneral Education- Contigency Assistance forsustains of school facilities-General Civil Work

Amount

Sheet roofing, Electrification and Furnitures

15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD186219/2023-2024:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications excluding priming coat, preparation of surface, etc. complete.On steel work

OD190789/2023-2024:Providing & fixing on ceramic roof tile of 10 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

OD190788/2023-2024:Providing & laying on roof ceramic tile ridge of 10 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

OD186185/2023-2024:200 mm square PVC gutter

OD186184/2023-2024:200 mm PVC rain gutter End cap

OD186183/2023-2024:200 mm PVC rain gutter End drop

OD186177/2023-2024:Providing and fixing steel wire mesh of size 25x25mm made of GI wire of dia 4mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer in charge

OD186180/2023-2024:Engaging carpenter for repairing works

OD186181/2023-2024:Engaging fitter for maintenance works to plumbing lines

OD186182/2023-2024:Engaging man mazdoor for clearing rubbish and cleaning site

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

14.66.2:Finish walls with Acryllic Smooth exterior paint of required shade:Old work (One or more coat applied @ 0.90 ltr/10 sqm)

21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)

OD133439/2024-2025:Providing and supplying desk of size 120x40x50 cm height.Legs 30x30x1.2mm GP square tube,desk top frame 25x3 mm angle,crosses 25x25x1.2mm GP square tube,foot rest 25x25x1.2mm GP square tube.All the metal parts in chemical treated powder coated finish.Top using 17 mm both sides laminated exterior grade MDF/HDF with 2mm high quality PVC edge lipping

OD134236/2024-2025:Providing and supplying bench of size 120x30x30 cm height.Legs 30x30x1.2mm GP rectangular tube,seating frame 25x3 mmMS angle,crosses 25x25x1.2mm GP square tube,foot rest 25x25x1.2mm GP square tube.All the metal parts in chemical treated powder coated finish.Top using 17 mm both sides laminated exterior grade MDF/HDF with 2mm high quality PVC edge lipping

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Cods Constructions (BID ID -1965811)

Amils John (BID ID -1973412)

ALIAS P.P (BID ID -1971131)

SAJID P P (BID ID -1973441)

Bidder Name

Cods Constructions

K K ISMAIL

ALIAS P.P

Amils John

SAJID P P