PLWSS BATAHAN AND TS ADJONNG VLLAGES

Amount

Cutting in earth work and diposal of excavated earth work in all kind of soil such as pick work jumper work blast work and chiselling work soft/ hard as directed in all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and laying cement concrete 1:6:12( 1cement:6 sand:12 ( graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge. .

Providing and laying cement concrete 1:5:10( 1cement:5 sand:10 ( graded stone aggregate 40 mm nominal size) with 15 % plum concrete and curing complete excluding the cost of form work in foundation and plinth including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge. .

Providing and laying cement concrete 1:3:6( 1cement:3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge. .

Random rubble masonary/Polygonal rubble masonary (coursed or brought to courses with hard stones of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 in cement mortar 1:6 (1 cement : 6 sand ) including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and laying cement concrete 1:1:2(one cement :one sand : three graded crushed stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work in all leads and lifts including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

walls any thickness but not less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc.from top of foundation level upto floor two level in all leads and lifts .

Providing and laying cement concrete 1:1.5:3(one cement :one and half sand : three graded crushed stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced cement concrete work in all leads and lifts including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

(a) Foundation ,footings bases of columns and the like mass concrete in all leads and lifts

iii) Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth.

b) suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.

walls any thickness but not less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc.from top of foundation level upto floor two level in all leads and lifts .

Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 40 mm nominal size )and curing complete excluding the cost of form work and reinforcement including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Foundation ,footings bases of columns and the like mass concrete in all leads and lifts

i) suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.

Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level 2nd class bricks cement mortar 1:6(1cement:6sand) including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level 2nd class bricks cement mortar 1:4(1cement:4sand) including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Half Bricks Masonery using common burnt clay building bricks in super structure above plinth level upto floor two level 2nd class bricks cement mortar 1:4(1cement:4sand) including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing 40 * 3 mm iron hold fast 40 cm long including fixing to frame with 10 cm dia bolts, nuts and wooden plugs and embending in c.c. block 30*10*15 cm 1:3:6 ( 1 cement:3 sand: 6 graded stone aggregate 20 mm nominal size including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing form work form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

(a) Foundation ,footings bases of columns and the like mass concrete in all leads and lifts

i) Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to 200 mm in thickness.

walls any thickness but not less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc.from top of foundation level upto floor two level in all leads and lifts .

ii) Edges of slab and breaks in floors and walls under 20 cm wide.

iii) Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth.

Providing form work of ordinary timber plankings so as to give a rough finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling and removal of the same for-in-situ reinforced concrete and plaiin concrete work as per directions and to the entire satisfaction of Engineer- in Charge at site of work. in:-

Where inclination to horizental plan does not exceed 30 degree requiring shuttering only on the under side.

Providing and fixing of 3.15 mm MS sheet man hole cover 600*600 mm fixed in all sides with ISA 40 X25X5 top angle iron frame hinged on ISA 35X35X5 mm bottom angle iron frame as per drawing including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and fixing CI Ventilation pipe 100 mm dia with CI cowl fixed a tope including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and fixing double flanged Cast iron sluice valve class 1 conforming to IS: 780-1984 of Leader//Bhel/Kirlosikar/ Fources/Gled/Pelican /Kartar make of following dias for the pipe line capable to withstanding the normal sheat test pressure including cutting, welding rubber/asbestos sheet of maximum thickness 3mm as per IS: 2712-1979 and providing, welding and fixing MS flange as per Table-5 with requried number of nuts and bolts including carriage of material in all leads and lifts.

100 mm dia

50 mm dia

Laying, jointing and testing of GMS tube in trenches (light grade) of following dia meter including providing and fixing tube fitting such as bends, tees, air valves, unions and collars etc. including carraige of GI pipes as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately) in all leads and lifts.

100 mm dia

32 mmdia

Providing and fixing angle iron posts 2.5M long centre to centre with nine cuts to fixed the barbed wire in all leads and lifts.

Providing and fixing 1.20 mtrs. hight fencing (as per approved design) 1.80 mtrs. RCC posts 3 metres centre to centre and RCC struts with 9 horizontal lines and two diagonals of galvanised steel barbed wire (IS 278-1962 type-I) weighting 9.38 kg./100m (Minimum) stained and fixed to posts by typing to 6mm galvanised steel bar nibs clips with GI binding wire including cost of RCC struts and straining.

Providing and fixing of fencing pannel of size 2.5 Mtr X 0.50 Mtrs devided in two pannels of 1.00X 0.55 m by fixing duly welded back to back angle at center of frame, fitted with 25 mm X 25 MM X3 mm wire mesh welding to MS angle frame of 40X40X 3mm all aroundd and MS flat cover over mesh of size 25 X5 mm and holt fast etc. complete pannel including all proces of cutting welding painting with red oxied paint complete in all respect in all leads &lift as per direction and satisfaction of Engineer- in -Charge.

Steel work welded built up section section including cutting, hoisting and fixing in position and applying a priming coat of red lead paint in grauting framed guard bar ladders, railing brakcet and similar work complete as per direction of the Engineer-in-charge in all leads and lifts.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Cement pointing on Brickswork with cement mortar1:4 (1 Cement : 4 Sand ) including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Sand filling under floors including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Stone Soling under floor tightly hand packed including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing wood work in frames of door, windowc, clerestory windows and other frames wrought, framed and fixed in position including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge. 0 including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge. 2nd class deodar wood.

6mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand)including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand) including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Precast terrazzo tiles 20mm thick with marbal chips of specified sizes laid in floors on a bed of 25mm average thickness of cement mortar 1:6(1cement:6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and policing complete including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.with tiles of following shades:- a. Silver gray.

Providing and fixing M.S. grills of required pattern in MS frames of windows etc with MS flat welded with wire mash including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Distempering dry distemper of approved brand and manufacturer( Two coats) and of required shade on undecurated wall surface to give an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and laying cement concrete flooring 1:2:4( 1cement:2 sand: 4 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge. 40 mm thick.

Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 45 mm thick including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..2nd class deodar wood.

White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with readymade paint other than white including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and fixing anodised aluminium sliding door bolts with bolts and nuts screws etc. complete including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and fixing anodised aluminium tower bolts ( barrel type) with screws etc. complete including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing ad fixing anodised aluminium handles with necessary screws etc. complete including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and laying plinth protection in cement concrete 1:3:6( 1cement:3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge. 40 mm thick.

Providing and fixing vitreous china wash down water closet ( European type. W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement :1 sand )( Seat and cover to be measured and paid for separately including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.:-

Providing and fixing 100 mm size P or S trap for water closet ( squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1 cement :1 sand) Vitreous china including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and fixing automatic flushing cistern with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus, masquito proof lid, C.P. Brass unions and coupling for connections with inlet, out let and over flow pipes including cutting holes and making good the same ( over flow pipe tobe measured and paid for separately) 5 ltr capacity including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and fixing vitrous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings 630 mm X 450 mm including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and fixing 25 cm long PVC connection pipe 15mm dia with brass union of superior quality as approved by the Engineer-in-charge.

Providing and fixing bath room jet in water closet complete in all resect including PVC connection pipe with brass check nut and all other accessories contingent thereto including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and fixing C.P consild angle cock ISI marked including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and fixing chromium plated pilar cock of 15 mm dia of superior quality including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and fixing chromium plated bib cock of 15 mm dia of superior quality including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and fixing chromium plated brass waste coupling for wash basin or sink 32 mm dia of superior quality including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and fixing C.P Brass S Traps for wash basin and sink 32 mm dia i/c alll accessories of superior quality including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and fixing 600mm X 450 mm beveelled edge mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and fixing PVC Pipe 100 mm dia complete including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and Fixing GI unions 15 mm dia heavy duty complete in all respect including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and Fixing GI elbow 15 mm dia heavy duty complete in all respect including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and Fixing GI Tee 15 mm dia heavy duty complete in all respect including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and Fixing GI sockets 15 mm dia heavy duty complete in all respect including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and Fixing to wall ,ceilling and floor galvanised mild steel tube , fitting and clamps including making good the same ic.c. wall, ceiling and flooring 15mm including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.

Providing and Fixing GI nipples complete in all respect including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Providing and fixing C.P brass towel rail complete with C.P brass brackets fixed to wooden plug with C.P brass including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.:-

Providing and fixing chromium plated brass soap dish with CP Brass bracket fixed to wooden cleats with screws etc complete including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge.as approved by the Engineer-in-charge.

Providing and Fixing PVC water storage tank 500 ltrs cap.complete in all respect including carriage of merial within all lead / lift as per the deriction and statisfaction of Engineer-in- Charge..

Supply installation, commissing and testing vaccum operated, pressure feed gaseous Chlorinator of Toshcon Jesco/Capital make for chlorination of water by direct feeding to existing water man consisting of the following components in all leads and lifts as sprcified below .

Providing installation and commissioning of gaseous type fully vaccum chlorination system having 0-1 kg per hour chlorine gas feeding capacity of PENWALT(USA) / ECOCHLOR (USA)/ ENCHLOR (USA)/Jasco (USA) naje, The system shall have vacuum regulator with inbuilt filter and Pressure Gauge, in -built Filter and Pressure Gauge,In-built Measuring Glass with dose rate adjuster. Vacuum ejector, ejector Non Return Valve,4.0 m long PE tubing (As Vacuum and Vent tubing), 32 mm Spanner,Ammonia Solution etc . in all leads and lifts and to the entire satisfaction of Engineer-in Charge. Chlorine Gas Injector

Providing installation & commissioning single phase monoblock pump 1.5 to 2.0 HP of required monoblock pump 1.35 to 2.0 HP of requiired discharge capacity with Motor of Kirloskar/Crompton Greaves make with common steel fabricated base frame fuly grouted a site incldingstarter and cabling including all leads and lifts and as per entire satisfaction fo Engineer-in-charge.

Providing and fixing Bulk meter 150 mm dia of wolt mann type conforming to class B of ISO 4064 and prequipped for AMR with flang Table- 17 with nut , bolt and gasket including complete proces of fixing new valve by all means complete job in all respect with in all leads & lift as per direction of Engineer-in- Charge.

Providing installation and commissioning of ISI amrked PVC pipe and fittings, ball valves, lead wahers, O-rings, GI pie and fitting for instllation oand grouting of steel stand for ejector of gaseous type chlorination system complete in al respect includingall leads and lifts and as pr entire satisfactio of Engineer-in-cahrge.

Providing and Installation of gas filled chlorine gas cylinder of 10 kg capacity as BIS standard duly certified by the Petroleum and exposive safety Organization Gove. Of India for filling of chlorine gas required for the scheme including all leads and lifts and as per the satisfaction of engineer-incharge.

Providing and Supplying of Safety Kit.

Oasis Enterprises