PROCUREMENT OF TESTING EQUIPEMENTS FOR UPGRADATION OF LABORATORY

Amount

Shade card winding machine It should have following specifications: Completely automatic, with digital display.  Single geared motor with traverse mechanism.  10 Bobbin at a time can be used.  Provided with stand to accommodate 10 baby cones. Has digital counter to set the number of rotations Rust proof coating  At least 500 empty cards shall be provided Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Universal Tensile Strength Tester To determine Tensile strength and elongation of fabric, carpet and thread as per CRE principle . It should have following specifications: Instrument Detail : The instrument should be digital with window based software having automatic control of unit , user friendly interface and presentation of test reports together with data storage and retrieval with following features - Capacity -20 KN Type of loading : Axial Load cell capacity 20 KN ( measuring range 20 N to 18 KN as per DIN EN ISO 7500 ) Accuracy of load cells : Both 0.5 % & 1% as per DIN EN ISO 7500-1 Breaking Force of load cell : 300 % of the maximum load capacity of the load cell Digital Servo Drive system Page 18 of 29 IICT/Tender/Document/2020-21 Speed of the machine : 0.001 mm/min to 500 mm/min ( step less variable ) Safety Features : In built protection / control in the machine for following conditions - Load cell overall protection via software limit switch - Both hardware & software limit switch for over travel of traversing crosshead in both direction (Up & down ) - Automatic stopping & return of the machine to the original position with a click of a button - Emergency switch - Suitable Grips for testing of fabric , carpet and thread strength : Test Software : Window based software for testing , data acquisition and representation of result for CRE tests .The software should have following features?o Preparation of Test o Carrying out of test o Full statistical Analysis o Real time Graphical display o Real Time Test Results o Data Acquisition Accessories Required: All standard accessories Reference Standards : ASTM D 2256, ASTM D 5034 / IS 1969 Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Crock Meter The instrument should conform to IS: 766/ AATCC-8/ISO X-12 standards. It should have following specifications:  Diameter of the Rubbing Finger : 16 mm & 25 mm  Load on the Finger : 9 N & 20 N  Length of the Traverse : 100 ±5 mm  Counter (Re-settable) : 4-Digit Counter  Rubbing cloths: 500 pieces  Motor driven auto stop Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Pile Thickness Guage Electronic Hand operated micrometer with following specifications :  Measuring Range : 0-30 mm  Accuracy : 0.02 mm  Head Diameter( Pressure Foot) : 12 mm  Lower Plate diameter(Anvil):50mm&75mm( interchangeable)  Test Pressure : 0.5 , 1 , 2 , 5 , 10 & 20 KpaPage 21 of 29 IICT/Tender/Document/2020-21 Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Tuft withdrawl Tester It should have following specifications:  Micro-computer control, large LCD display, automatic data processing.  Professional carpet tufting clamp.  Maximum load range=120N  Power supply =AC220v+_ 10%,50HZ Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

Industrial Heater Press It should have following specifications:  Laboratory model with press head size approximately 2.5 Inch X 2.5 inch  For label fusing purpose on carpet  Digital Temperature control  Digital Timer  Adjustable Pneumatic Pressure Other requirements: All accessories as required (Pl Provide list of the accessories with Technical Bid) Note: Calibration certificate should be provided

VEEKAY INDUSTRIES