BID DOCUMENTS FOR ADDITION AND ALTERATION FOR NEW TAX OFFICE, MARRIAGE REGISTRATION DEPARTMENT, JANAM MARAN DEPARTMENT AND NAGRIK SUVIDHA KENDRA AT KARAMSAD ANAND MUNICIPAL CORPORATION

// SCHEDULE - B //

Name of Work :- Bid Documents for Addition & Alteration for New Tax Office, Marriage Registration Department, Janam Maran

Department & Nagrik Suvidha Kendra at Karamsad Anand Municipal Corporation

Estimated Estimated Rates Total Amount

Estimated Estimated Rates Total Amount

but may Item of Work Unit According to

be more or estimated quantities

less In Figure In Word

Demolition of Brick work and stone masonry including

Rupees Five Hundred

stacking of serviceable materilas and disposal of

1 18.30 562.89 Sixty Two and Eighty Cu.m.

unserviceable materials with all lead and lift.(ii) In Cement

Nine Paisas Only

Dismentling doors, windows, ventilators etc. (wood or steel)

Rupees One Hundred

shutters including chowkhats architraves, holdfasts and

2 25.00 192.09 Ninety Two and Nine Nos

other attachment etc. complete and stacking them within all

lead and lift.(i) Not exceeding 3 Sq.M. in area.

Removing dry or oil bound distemper by a washing and

Rupees Eleven and

3 1598.10 scraping and sand papering the wall surface smooth 11.53 Sqm

Fifty Three Paisas Only

including necessary repairs to scratches complete.

Brick work using common burnt clay building brick having

Rupees Four Thousand

crushing strength not less than 35 kg/sq. cm. in brick in

Two Hundred Fourteen

4 34.70 super structure above plinth level up to floor two level in 4214.33 Cu.m.

and Thirty Three Paisas

cement mortar 1:6 (1 Cement : 6 fine sand) (B) Conventional

Providing 15mm thick cement plaster in single coat on

Rupees Two Hundred

Rough (Similar)side of single or half brick walls for interior

5 494.30 203.78 Three and Seventy Sqm

plastering upto floor two level and finished even and

Eight Paisas Only

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even Rupees One Hundred

6 960.10 shade after thoroughly brushing the surface to remove all 120.26 Twenty and Twenty Six Sqm

dirt, and remains of loose powdered materials.etc complete Paisas Only

TEXTURE - Providing and applying on exterior surfaces of

Heritage surface texture granules finish trowelled over

mm thick sand faced cement plastered {Two Coat of 12 mm

in CM 1:3 & 8 mm coat in CM 1:1) sub strata to get an

average finish coat thickness of 0.08 to 1.2mm comprising

of three components viz. Dry granules, Granules bonding

agent and top coat of Glossy finish (Dry granules shall be Rupees Seven

made from Silica sand, pigments, primarily inorganic ) pure Hundred Sixty and

acrylic copolymer emulsion, etc, and top coat made from Seventy Three Paisas

solvent acrylic co-polymer emulsion , broad pectrum Only

fungicide product including scaffolding, surface preparation

with all contractor's material, labour, tools, plant, lead, lift

and transportation etc, complete as per specifications and

as directed by the Engineer-in Charge at site.

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to

Rupees Forty and Fifty

8 987.60 give an even shade including thoroughly brushing the 40.59 Sqm

Nine Paisas Only

surface free from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

Rupees Eighty Two and

9 987.60 surface to give an even shade including throughly brushing 82.85 Sqm

Eighty Five Paisas Only

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

MODULAR ALUMINIUM PARTITION Providing and fixing

aluminum partitions partly glaze and partly fixed with

extruded built up standard tubular sections/

appropriate section size :- 63.50 MM x38.10 MM wall

thickness 1.95MM (of jindal section code - 20773 and other

sections of approved make conforming to IS: 733 and

IS: 1285, fixing with dash fasteners of required dia and size,

including necessary filling up the gaps at junctions, i.e.

at top, bottom and sides with required EPDM

rubber/ neoprene gasket etc. Aluminum sections

shall be smooth, rust free, straight, mitred and

jointed mechanically wherever required including cleat

angle, Aluminum snap beading for glazing / paneling and Rupees Five Thousand

dash fasteners to be paid for separately) : 1.95 mm Three Hundred Three

thick aluminum section with followings: • Color and Fifty One Paisas

Anodised aluminum (anodised transparent or dyed to Only

required shade according to IS: 1868,ne. CENTRE-TILT

mechanism: The mechashould be m should be designed

with the following features , 360° revolving type , 17° ±2°

maximum tilt on pivot at centre, Upright position locking

, Tilt tension adjustment. , PNEUMATIC HEIGHT

ADJUSTMENT: The pneumatic height adjustment has an

adjustment stroke of 11.0 ±0.3cm,TELESCOPIC BELLOW

ASSY: The bellow should be 3 piece telescopic type and

injection moulded in Black Polypropylene ,PEDESTAL

ASSEMBLY: The pedestal should be injection moulded in

black 33% glass-filled Nylon66 and fitted with 5 nos.

twin wheel castors. The pedestal should be 66.3 ±0.5cm.

Providing dia. (76.3

& fixing 35 mm±1.0cm

thickwith castors.)

shutter flush door

solid core finished with both side 1 mm thick lamination

Rupees Five Thousand

both side, of natural wood grain shade as approved by this

11 18.70 5565.20 Five Hundred Sixty Five Sqm

office as per the instruction of Engineer in charge.with

and Twenty Paisas Only

necessary SS hinges and fixtures etc . complete.

Providing and fixing window having extruded aluminum

Colour Powder Coated section frame main outer size 95mm

x 24mm x 1.17mm @ wt.of 0.738 Kg/mt, horizontal Three

track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07

Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm

Rupees One Thousand

,@ Wt. 1.06 Kg/mt with sliding shutters of horizontal

Five Hundred Ninety

12 47.70 member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, 1591.87 Sqm

One and Eighty Seven

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc

Providing and fixing standared extruded of alluminium

Rupees One Thousand

section of size 63mm x 38.10mm x 1.2mm @ Wt.

One Hundred Seventy

13 1.80 Kg/mt with colour anodized alluminium frame for 1175.56 Sqm

Five and Fifty Six Paisas

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

Providing and laying Mirror polished Machine polished

Granite stone slab 18mm (Average) thick for Door /

Windows cill & Jams Clading as per design incl. full moulded Rupees Three

round front edge in rade of steps laid on 20 mm thick Thousand Six Hundred

cement mortar 1 : 6 (1 cement : 6 coarse sand) jointed with Ninety Three and Fifty

grey cement slurry including ubbing and polishing etc. Seven Paisas Only

complete As per design directed by engineer in charge.

Providing and fixing M.S. Grill of required pattern with M.S

pipe/Angle/flat at required spacings with one coat of Rupees One Hundred

15 2493.30 applying oil based priming coat and painting two coat of oil 112.72 Twelve and Seventy Kg

paints etc. complete. As per design directed by engineer in Two Paisas Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside

Dia. Low densidy, complete with special falnge compression

16 27.50 339.05 Hundred Thirty Nine Rmt

type fittings, wall clipsetc. including making good the wall

and Five Paisas Only

ceiling and floor.(G)110 mm

Providing and laying white glazed tiles 6mm thick in skitring

risers of steps and dado on 10 mm thick cement plaster 1 : Rupees Nine Hundred

17 66.72 3 (1 cement : 3 coarse sand) and pointing in white cement 985.47 Eighty Five and Forty Sqm

jointed with white cement slurry. Seven Paisas Only

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter Rupees Seven

with bitumen and G.I. limpet washer or G.I. limpet washer. Hundred Thirty Four

filled with white lead complete excluding the cost of purlins, and Nineteen Paisas

Rafters and Trusses.(1) 0.80 mm thick sheet. Only

Providing erecting and fixing double coated ISI water tank

Rupees Three and

19 1000.00 of required capacity each with all necessary fittings and 3.95 Ltr.

Ninety Five Paisas Only

connection etc. complete on terrace

Providing and fixing screw down bib taps of following Rupees Two Hundred

20 25.00 size.(A) Brass screw down bib tap polished bright. (ii) 20mm 214.81 Fourteen and Eighty Nos

dia. One Paisas Only

Providing and fixing Gun metal check or non-return fullway Rupees Four Hundred

21 5.00 wheel valve.(C) 25mm dia. 420.63 Twenty and Sixty Three Nos

Providing and fixing ball cock of approved. quality as Rupees One Hundred

22 5.00 directed.(A) Copper Metal (i) 25mm dia. 132.89 Thirty Two and Eighty Nos

Nine Paisas Only

Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

Rupees Seventy Two

the wall with the help of clamp at every two metre C/C or

23 60.00 72.65 and Sixty Five Paisas Rmt

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

Rupees Ninety One

the wall with the help of clamp at every two metre C/C or

24 45.00 91.84 and Eighty Four Paisas Rmt

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

Rupees One Hundred

the wall with the help of clamp at every two metre C/C or

25 20.00 195.67 Ninety Five and Sixty Rmt

shall be concealed as directed including necessary fittings

Seven Paisas Only

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using Rupees Eight Hundred

26 20.00 of PVC clamp of the size 110 mm diametre x 149 mm length 876.90 Seventy Six and Ninety Rmt

x 145 mm heigh at every 2000 mm center to center or shall Paisas Only

be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including

cost of all materials.

Constructing brick masonry road gully chamber 1100mm x Rupees Eight

775mm including 500mm x 450mm (C.I. horizontal grating Thousand Seven

27 1.00 with frame and vertical grating complete.) 8767.25 Hundred Sixty Seven Nos

and Twenty Five Paisas

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush Rupees Two Thousand

28 7.00 pipe.(A) Squating plate pattern white earthenware 2026.06 Twenty Six and Six Nos

550mm x 300mm. Including Providing and fixing chromium Paisas Only

plated brass Angle cock 15mm etc complete.

Providing and fixing wash down water closet (European

type, W.C. Pan) with integral P or S trap including jointing

the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

fine sand) including providing & fixing plastic seat and cover

for wash down WC with C.P. brass hinges and rubber buffer

back plastic seat and including providing & fixing PVC Rupees Three

Flushing tank with a pair of CI or MS bracket with polythene Thousand Six Hundred

float CP Brass handle unions, Angle cock including hand Thirty One and Thirty

faccet and couplings for connection with inlet outlet and Five Paisas Only

overflow pipes 40mm dia. porcelain enameled flush bend

including cutting hole in walls and making good the same

connection the flush bend, flush tank capacity of 10 Lit. with

cistern and closet of vitreous china.

Providing and fixing washbasin with single hole for pillar

tape with C.I. or M.S. brackets painted white including

cutting holes and making good thesame but excluding Rupees Two Thousand

fittings. (A) vitreous china : (ii) Flat back washbasin 550 mm Three Hundred Twenty

x 400 mm size (i) IN white colour. Including Providing and One and Ninety Nine

fixing C.P brass waste, M.I.Fisher Union with chromium Paisas Only

plated brass Pillar cock 15mm etc complete.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, Rupees Four Hundred

31 50.00 single mounting base frame covered with 485.81 Eighty Five and Eighty pt.

textured/metallic/white front plate modules erected on / in One Paisas Only

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete CATIII

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following Rupees Six Hundred

32 30.00 type erected on PVC / Metallic/Wooden box, single 674.68 Seventy Four and Sixty pt.

mounting base frame covered with textured/metallic/white Eight Paisas Only

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Point wiring for Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic box, Rupees Two Hundred

33 25.00 single mounting base frame covered with textured / 257.55 Fifty Seven and Fifty pt.

metallic front plate modules erected on / in wall / ceiling Five Paisas Only

with following type accessories Cat. III

Providing and erecting Approved make Ceiling fan with

double ball bearing ISI mark with condenser A.C.

Rupees One Thousand

23OV.50 c/ s.1200 mm. sweep complete, canopy and

Five Hundred Ninety

34 30.00 cms. down rod erected on existing hook or clamp with 1596.81 Ea.

Six and Eighty One

24/ 0.2 , 3 core flexible wire with earthing. [Make

shall be approved by Engineer in charge]

Providing Fan clamp of 30 x 5 mm flat of required length & Rupees Ninety Eight

35 30.00 10 mm M.S. Bolt & Nuts erected with necessary hook of 98.98 and Ninety Eight Paisas No.

10 mm M.S. Round Bar. Only

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron Rupees Five Thousand

36 1.00 galvanising, connection terminal dia of 12mm 5760.03 Seven Hundred Sixty No.

with constant ohmic value surrounded by highly and Three Paisas Only

conductive compound with high charge

dissipation suitable for following type of

applications. (b)For Electrical installation up to 11 KV

in normal soil. Length of Pipe : 2.00 mtrs Back filling

Compound :1 no. Bag of 25 Kg.

Miniature circuit breaker single pole 6A to 32A suitable to

Rupees One Hundred

operate on 240 V A.C. system and having breaking

37 15.00 112.11 Twelve and Eleven Ea.

capacity 10 KA to be erected in existing box. confirming

to IS 8828/ 1996 with ISI Mark Cat.III

Supplying and erecting LED indoor fittings with LEDs of

wattage0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/ CRCA polyester powder

coated and high U.V. & corrosion resistance with diffuser

and/ or Polycarbonate optics with company mark/

name 120 to 300 V,Power Factor more than 0.9, THD < Rupees Three

38 50.00 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, 373.70 Hundred Seventy Three Ea.

Luminaire efficacy> 85 lumens/ watt, LED driver and Seventy Paisas Only

efficiency > 85 % CREE / OSRAM / PHILIPS

Lumileds / NICHIA / SEOUL/ Bridgelux(U.S.A.)

make LED used for luminaire. (Each fitting required (A)

Tube Light with integral/ non-integral driver (IV) 22-24

Watts, Surge - 2KV,IP-20, 4 feet Cat-lll

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq.

Rupees One Hundred

mm copper conductor FRLS PVC insulated stranded

39 250.00 112.11 Twelve and Eleven Mtr.

wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe

and accessories (a) 2 wire 4 sq. mm

Supplying & erecting approved make LAN cable of Rupees Seventy Six

40 180.00 following size in existing pipe as per direction [D] CAT - 6 e 76.76 and Seventy Six Paisas Mtr.

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with

Rupees One Thousand

single mounting base frame covered with textured/metallic

One Hundred Thirty

41 35.00 /white front plate,modules erected with necessary 1133.22 Ea.

Three and Twenty Two

connections as directed 1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug For

Modular Type Accessories cat III

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for Rupees One Hundred

42 120.00 1.1 KV. to be laid on wall with necessary clamps or in 190.89 Ninety and Eighty Nine Mtr.

existing trench / pipe of following size of cables (e) 4 core Paisas Only

Providing and erecting Inverter based approved make split

air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

Rupees Forty Eight

separately erected evaporating unit and blower motor with

43 5.00 its accessories by means of extra supplied proper insulated 48257.80 Ea.

Hundred Fifty Seven

copper tubing,drain PVC pipes suitable for ( cost includes

and Eighty Paisas Only

Eco Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core cutting.

(2)For 4/5 Star Rating of current year (B) for 1.5 ton

capacity- Premium Cat.

Providing and erecting approved make ductable split Air

Conditioning unit each consist of remote located

condensing unit and an evaporating unit complete with

interconnecting insulated refrigerant piping up to 10 RMT.

rigid PVC, drain piping of 10 kg / cm2 dully insulated with

nitrile rubber insulation of 10 RMT with ECO Friendly Green Rupees Two Lacs Fifty

gas. The condensing unit is complete with hermetically Five Thousand Sixty

sealed scroll compressor & condenser unit which Two and Thirty Seven

effectively achieves heat rejection by utilizing air of fan Paisas Only

and coil type condenser. The evaporating unit will be

complete with DX evaporator centrifugal blower, blower

motor along with microprocessor biased remote controller

with memory backup etc. (C) For 11 Ton

Extra charges for the refrigerant piping beyond standard

length For ductable A.G. Machine 18 Gauge hard drawn Rupees Two Hundred

45 50.00 copper pipe including necessary fittings Le. 232.30 Thirty Two and Thirty Rmt

elbows,couplings , reducers etc. For Suction/ Hot Gas/ Paisas Only

Liquid Line. 5/8" O.D.

Extra charges for the refrigerant piping beyond standard

length For ductable A.G. Machine 18 Gauge hard drawn Rupees Four Hundred

46 50.00 copper pipe including necessary fittings Le. 424.20 Twenty Four and Rmt

elbows,couplings , reducers etc. For Suction/ Hot Gas/ Twenty Paisas Only

Liquid Line. 1-1/8" O.D.

Remote control. Corded remote controllers Rupees One Thousand

Eight Hundred Fifty

Eight and Forty Paisas

Extra charges for the refrigerant piping insulation For

Rupees One Hundred

Suction line with following Thickness Nitrile ribber class 'O'

48 30.00 151.50 Fifty One and Fifty Rmt

insulation beyond standard length. 5/8" O.D. - 19mm thick

Extra charges for the refrigerant piping insulation For

Suction line with following Thickness Nitrile ribber class 'O'

49 30.00 323.20 Hundred Twenty Three Rmt

insulation beyond standard length. 1-1/8" O.D. - 19mm thick

and Twenty Paisas Only

Supply, installation, testing & commissioning of control and

Rupees Two Hundred

cummunication cabling between the indoor and outdoor

50 50.00 203.01 Three and One Paisas Rmt

unit in the rigid PVC conduit. (C) 4C X 1.5 Sq mm Shielded

Partition 3" Thick Laminate Finish

Providing and Fixing solid full height partition (upto 3"

above the false ceiling) using 50mm x 50mm x 1.5mm size

Jindal or eq. make Aluminium members in a grid not exceed

of 600 mm x 600 mm c/c distance, fixing 12 mm thick Fr

grade plywood of Century/Green or equivelent company on

both side with self drilling screw, All plywood joints should

be supported with aluminium members. All exposed side of Rupees Seven

plywood, will then finished with 1 mm thick laminate sheet Thousand Six Hundred

or as specified of approved make on both sides with Marin Seven and Thirty Two

Favicol. Cavity of partition must be filled with 50 mm thick, Paisas Only

min. 24 density glasswool of Tuviga or eq. make etc.

complete as per Architect's instructions. (Note : In case of

false ceiling, the vertical aluminium members to be fixed

with RCC ceiling but the area of partition payable will be

below the false ceiling only). As per Specified by Architect

and Engineer in charge.

Toughened Glass Partition

Providing & Fixing fully glazed toughened glass partition.

The partition shall be executed by using appropriate ozone

brand fixtures as per the size of partition (selection of

harware as specified by ozone company ). The glass shall be

of 12mm thick clear toughned glass (Modiguard or

Saintgobin) with stick on design film of 3m brand as

specified with all edges of glass should be machine cut, Rupees Six Thousand

fixed with clear silicon sealent from both inside & outside & Seven Hundred Ninety

shall be provided with sufficient drying period. The entire Two and Twenty Five

glazing shall be erected in complete line & Level. Clear Paisas Only

visible area will be considered for measurment purpose. All

glasses shall be in full length only unless otherwise

specified. All the joints between Wall/Column/Ceiling/Floors

& Glass shall be finished with clear silicon sealent from

outside & inside. As per Specified by Architect and Engineer

MEDIUM BACK CHAIRS : Providing and supplying

Revolving High Back Chair with head rest .Ergonomic

design. Knee tilt synchro mechanism with multi position

locking arrangement and aluminium die cast arm rest

with polished veneer finishing on top of arm rest.

Specially designed anti topple aluminium die cast base,

class-3 gas lift for seat hight adjustment & glass filed

nylon castors for smooth movement,45 DC mouled cusion

in seat and back for better comfort. The chair

include pneumatic seat height adjustments. The sheet Rupees Ten Thousand

53 5.00 and back should be covered with approved genuine 10756.50 Seven Hundred Fifty Six Nos

leather and PU leather finish. The quoting price should be and Fifty Paisas Only

inclusive of all types of taxes & duties ,packing,

forwarding, loading, unloading, installaion. Supplied

strictly as per our technical specifications and make.

Approved Make :- HOF MARCO 1011 H/

Nilkamal Trenvi/Goderej Prime.As per choice of

users department and Concern officers in charge as directed

by the Architect/Engineer.

VISITOR CHAIR Composite lather finish Low Back chair with

MESH (visitor chair) ( Revolving) SEAT ASSEMBLY: The

seat assembly should be made up of 1.2 ±0.1cm. thick

hot-ressed plywood , upholstered with fabric

upholstery covers and moulded Polyurethane foam , SEAT

SIZE: 47.0 cm. (W) x 48.0 cm. (D).BACK ASSEMBLY: The back

asembly. should be made of powder coated (OFT 40-

microns) tubular frame of 0 2.54 , ±0.03cm. x

±0.016cm.thk. MS ERW tube designed with contoured

lumbar support for extra comfort. The back should be

upholstered using double layer spacer mesh fabric with

high tenacity yarn.BACK SIZE : 46.5 cm (W) x 60.5 cm

(H). HIGH RESILIENCE (HR) OLYURETHANE FOAM: The Rupees Seven

HR polyurethane foam should be moulded with density Thousand Nine

=45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% Hundred Twenty Eight

compression , ARMRESTS: The one-piece armrests should and Fifty Paisas Only

be injection moulded from black Co-

PolymerPolypropylene. CENTRE-TILT , mechanism: The

mechashould be m should be designed with the following

features , 360° revolving type , 17° ±2° maximum tilt on

pivot at centre, Upright position locking , Tilt tension

adjustment. , PNEUMATIC HEIGHT ADJUSTMENT: The

pneumatic height adjustment has an adjustment stroke of

11.0 ±0.3cm,TELESCOPIC BELLOW ASSY: The bellow

should be 3 piece telescopic type and injection moulded in

Black Polypropylene ,PEDESTAL ASSEMBLY: The pedestal

should be injection moulded in black 33% glass-filled

Nylon66 and fitted with 5 nos. twin wheel castors. The

pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3

NAME BOARD Providing & Supplying name Board -

Soft Board with decorative plates with s.s/redium

Rupees Two Thousand

words with 2-way hanging options having size of 600 (L)

Two Hundred Seventy

55 25.00 X 300 (W) with all necessary fixtures & accessories etc. As 2272.50 Nos

Two and Fifty Paisas

per choice of users department and Concern officers in

charge as directed by the Architect/Engineer.

P & F of Tables including all labour and materials.

Specification : The height of the table should be 750mm;

The basic structure of the table should be made out of Top

made of 18mm calibrated plywood with laminate with 2mm

56 41.70 12625.00 Thousand Six Hundred Sqm

edgeband; modesty made of 17 mm calibrated plywood

Twenty Five Only

with laminate with 0.8mm edgeband; under structure 50 x

25 leg & 25 x 50mm ms pipe tie member with powder

P & F of File storage cabinet including all labour and

materials. Specification : The height of the cabinet should be

2100mm;All carcase made of 18mm calibrated plywood with Rupees Forty Three

laminate with 0.8mm edgeband; back made of 6mm Thousand Two

plywood with laminate; shutter made of 18mm calibrated Hundred Seventy Eight

plywood with laminate with 2 mm edgeband; openable and Fifty Paisas Only

shutter with lock & soft close hinges.

Supply, installation, and commissioning of a

Mechanical/Mechanized Mobile Compactor Storage System

designed for high-density storage. The system shall consist

of movable units mounted on a base frame that travels on

Rupees Forty Six

floor-mounted guide rails. The configuration must include

58 30.00 46965.00 Thousand Nine Sqm

Single-Faced Static Units (SFS), Double-Faced Mobile Units

Hundred Sixty Five Only

(DFM), and Single-Faced Mobile Units (SFM) as per choice

of users department and Concern officers in charge as

directed by the Architect/Engineer.

Total Amount Without GST

Total Amount Without GST

I/We am/ are willing to carry out the work @ _____________ % Above /Below ____________ Percentage (Should be written in Figures and Words) of

the Estimated rates mentioned above amount of my/ our Tender work out as under.

Estimated Amount Estimated Amount

Tender Rs. 89,97,600.00 Tender Rs.

Add % Rs. Deduct % Rs.

Total Rs. Total Rs.

(In Words (In Words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

4 Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Stamp with signature of contractor City Engineer

Karamsad Anand Municipal Corporation