Loading
Loading…
Loading…
Tender Value
₹5.4 L
EMD Value
₹13,500
Closing Date
7 Oct 2026, 5:00 pm
The Executive Engineer, PMU , KSD
Office of the Executive Engineer, Project Management Unit, Vydhyuthi Bhavanam, Vidhyanagar, Kasaragod 671123
CONSTRUCTION OF 11KV LINE AND INSTALLATION OF TRANSFORMER AT BOLLAR UNDER ELECTRICAL SECTION, PAIVALIKA
2026_KSEB_865488_2
21/26-27/EE/PMU/KSD dt 14-08-2026
Open Tender
Electrical Works
Percentage
90 days
PAIVALIKA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,298
₹13,500
7 Oct 2026
5 Sept 2026
9 Oct 2026
7 Sept 2026
7 Oct 2026
8 Sept 2026
7 Sept 2026 - 7 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing. | 1 | No | 2,795.55 | ₹2,795.55 |
| 2 | Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP including conveyance of materials. | 8 | No | 564.55 | ₹4,516.4 |
| 3 | Drilling hole of various sizes on existing Channel/Cross Arm. | 24 | No | 16.73 | ₹401.52 |
| 4 | Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5 m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling. | 9 | No | 2,266.55 | ₹20,398.95 |
| 5 | Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle). | 41 | No | 762.14 | ₹31,247.74 |
| 6 | Fitting and Erecting one HT PSC Single pole in position, including digging and back filling pit in ordinary soil (as per standards) excluding fitting cross arm and F clamp | 33 | E | 2,642.91 | ₹87,216.03 |
| 7 | Fiting One No MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable | 12 | E | 193 | ₹2,316 |
| 8 | Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm and connecting to existing MVT or other terminals,using the cable end termination kit supplied departmentally including charges for cable jointer etc. complete as per the direction of the departmental officers. | 18 | E | 370 | ₹6,660 |
| 9 | Erection of Anchor clamp / dead end clamp for 11kV ABC of any size | 25 | E | 164.67 | ₹4,116.75 |
| 10 | Erection of suspension clamp for 11KV ABC of any size | 28 | E | 164.67 | ₹4,610.76 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
TenderDocument.pdf
Tender Documents • 0.59 MB
BOQ_1469678.xls
BOQ • 0.28 MB
timeextension.pdf
PDF • 0.92 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .