Construction of Category D-1 & D Type unit Residential Quarters for Revenue Officer at Keshod , Dist.Junagadh

Quantities Description of Item Estimated Rate Unit Total amount

1 289.00 Excavation for foundation upto 1.5M depth including sorting out and 122.94 cum

stacking of useful materials and disposing of the excavated stuff upto

50 Meter lead. (A) Loose & soft soil

2 176.00 Excavation for foundation upto 1.5M depth including sorting out and 157.16 cum

stacking of useful materials and disposing of the excavated stuff upto

50 Meter lead. (B) Dense & hard soil

3 68.00 Excavation for foundation upto 1.5M depth including sorting out and 268.92 cum

stacking of useful materials and disposing of the excavated stuff upto

Meter lead. (D) Hard Murrum

4 108.00 Excavation for foundation for depth from 1.5 M. to 3. M including 287.21 cum

sorting out and stacking of useful materials and disposing of the

excavated stuff upto 5 Meter lead. (D) Hard Murrum

5 26.00 Providing and laying ordinary cement concrete M.150 for curing 4028.21 cum

complete excluding cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of columns and

6 89.00 Providing and laying controlled C.C.M.250 & curing complete including the 4760.13 cum

cost of form work but excluding the cost of reinforcement for reinforced

concrete work in foundation,footing bases of columns and the like and

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

7 22.00 Providing and laying controlled C.C. M.250 & curing complete including 7942.64 cum

the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Collumns, up to plinth.

8 112.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 3095.25 cum

6- hand broken stone aggregates 40 mmnominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth.

9 61.00 White Stone Bela mesonry block in course found & plinth with stone of 5338.36 cum

approved quality in Cement Mortar 1:5 (1-Cement : 5- course sand)

including packing the joints etc. complete.

10 195.00 Filling available excavated earth (excluding rock) in trenches. 136.61 cum

plinth, sides of foundations etc. in layers not exceeding 2cm. in depth

consolidating each disposited layer by ramming and watering.

11 575.00 Filling in foundation and plinth with murrum or selected soil in layers of 301.78 Cum

2cm. thickness including watering, ramming and consolidating etc.

12 245.00 Carrying out plinth treatment to post construction / existing structure by 59.46 Sqmt

spraying chemical solution for termite control treatment incl, labour

material consisting with ISI specification.

13 28.00 Providing and laying controlled C.C. M.200 & curing complete including 7903.25 cum

the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Collumns, pillars, posts & struts upto floor

two levlel for G.F.

14 45.00 Providing and laying controlled C.C.M.250 & curing complete including the 6044.85 cum

cost of form work but excluding the cost of reinforcement for reinforced

concrete work in Beam upto floor two level for G.F.(plinth Beam)

15 30.00 Providing and laying controlled C.C.M.200 & curing complete including the 6354.92 cum

cost of form work but excluding the cost of reinforcement for reinforced

concrete work in Beam upto floor two level for G.F.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

16 39.00 Providing and laying controlled C.C.M.200 & curing complete including the 6567.02 cum

cost of form work but excluding the cost of reinforcement for reinforced

concrete work in Slabs ,landing, cantilevers for slabfor GF

17 8.00 Providing and laying controlled C.C.M.200 & curing complete including the 8874.87 cum

cost of form work but excluding the cost of reinforcement for reinforced

concrete work in Vertical Fins

18 7.00 Providing and laying controlled cement concrete M.20 and curing 7545.71 cum

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (E) Staircases excluding landing upto floor

two level for G.F. to F.F.

19 14.00 Providing and laying Controlled cement concrete M -200 for R.C.C.Lintels, 7800.23 cum

including the finishing smooth with curing etc complete including the cost

of form work but excluding the cost of reinforcement For G.F.

20 3.00 Providing and laying controlled cement concrete M-200 curing complete 6658.93 cum

including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in CHHAJJAS G.F.

21 33510.00 Providing TMT Bar FE 500 reinforcement for R.C.C. work including 77.29 Kg

bending, binding and placing in position complete upto floor two level All

22 134.00 White Stone Bela mesonry block in course in superstructure with stone of 6479.69 cum

approved quality in Cement Mortar 1:6 (1-Cement : 6- course sand)

including packing the joints etc. complete.

23 77.00 White Stone Bela mesonry work in partition walls upto 15 cm thickness in 684.49 Sqmt

cement Mortar 1:4 ( 1- Cement : 4- course sand)

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

24 13.00 Providing and fixing FOUR track sliding window ( 3 Shutter + 1 4656.10 Sqmt

Mosquito Net Shutter ) : Using standard extruded color anodized

aluminum section equivalent to eries E (30mm) section numbers: frame

bottom track with weep holes 21198, frame top & sides 21176, shutter

top & bottom rail 20993, interlock rails 20550, shutter side Handle -

20549 with one mosquito net shutter and remaining with 5mm

thick transparent tinted float glass, with rubber gasket, air lock strip

and finishing joints with transparent silicon sealant, with alluminium

coated fittings and fixtures.

25 17.00 Providing and fixing THREE track sliding window ( 2 Shutter + 1 5095.45 sqm

Mosquito Net Shutter ) : Using standard extruded color anodized

aluminum section equivalent to eries E (30mm) section numbers: frame

bottom track with weep holes 20928, frame top & sides 20837, shutter

top & bottom rail 20993, interlock rails 20550, shutter side Handle -

20549 with one mosquito net shutter and remaining with 5mm

thick transparent tinted float glass, with rubber gasket, air lock strip

and finishing joints with transparent silicon sealant, with alluminium

coated fittings and fixtures.

26 2.00 Providing and fixing Standard extruded of alluminium section of size 63 x 1175.56 sqm

38.1 x 1.2mm (of Jindal Section No. 465, @ Wt. 0.643 Kg. per Rmt. with

colour anodized alluminium frame with 5mm thick transparent glass as

details for ventilation

27 20.00 Providing and fixing 35 mm thick shutters for Doors, windows and 3773.84 Sqmt

clearstory windows including lackenamelled M.S. butt hinges with

necessary screws. (A) Indian teak wood. (i) Fully Panelled.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

28 10.00 Providing and fixing FRP frame size 100x50 mm and 2377.76 Sqmt

28mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam

done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole

FRP frame & shutter is to be water proof weather

proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary

screws & alluminium fixtures & fastenings &

fastener sleeve.

29 852.00 Providing and fixing M.S. grills of required pattern to wooden frames of 112.11 Kg

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws. (A)

30 215.00 Providing and laying broken chine mosaic flooring for terrace using 1070.33 Sqmt

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with water and

oxalic acid with C.C 1:2:4 flooring with 40 mm etc.( waterproofing 3 years

bond for lekage) as directed.

31 28.00 Providing and fixing 25 mm thick shutters for cupboards etc. including 5346.94 Sqmt

black enamelled M.S. butt hinges with necessary screws. (A) Indian teak

wood. (i) Fully Panelled. laminated Pro. required drawer, Partitation &

direction of cup-board, lock, handle, cloth rail, stopper with inner site

touch wood ,polishing etc. Comp.as per direction by Engineer-in-charge

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

32 9.00 Providing and fixing 25 mm thick shutters for cupboards etc. including 7992.13 Sqmt

black enamelled M.S. butt hinges with necessary screws. (A) Indian teak

wood. (i) Fully Panelled. Kitchen Drawer Required S.S. tandem box

drawer 45 kg Capacity , Partitation / Self of cup-board, handle, s.s roller

channel, hing etc. with inner site touch wood ,polishing etc. Comp.as per

direction by Engineer-in-charge etc.comp.

33 54.00 Providing and Fixing Machine cut, free edges, machine polished Granite 2966.37 Sqmt

Telephonice Black stone sandwich type slab 18 mm thick for

Doors/Windows Cill and Jambs cladding as per design including full

molded round front edge and 1 cm nosing and laid on 10 mm thick

cement mortar 1:3 ( 1 cement:3 coarse sand) jointed with grey cement

slurry including rubbing and polishing finishing etc complete.

34 7.00 Constructing sand witch platform of 18 mm thick polished black granite at 5449.96 Sqmt

top and 25 mm thick Kota stone slab with 75cm height with necessary

support using cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesives including making necessary

grooves in walls with vertical kota stone 30 mm x 2 No. sandwich thick

every 60 cm centre to centre including all labour material of approved

quality including full molded round front edge fixed in wall for partition

and jointed with grey cement slurry including rubbing and polishing etc.

35 197.00 Providing 10mm thick Mala cement plaster in single coat on brick 179.91 Sqmt

concrete walls for interior plastering upto floor two level and finished

even and smooth in (i) Cement Mortar 1:4 (1-Cement:4 sand) incl.

finishing Putty with a floating coat of neat cement slurry etc. G.F.

36 531.00 Providing 15mm thick Mala cement plaster in single coat on smooth 222.66 Sqmt

finished (Similar)side of single or half masonary walls for interior

plastering upto floor two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand) incl. finishing Putty with a floating

coat of neat cement slurry etc. G.F.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

37 1559.00 20mm thick sand faced cement plaster on walls upto height 10 metres 342.41 Sqmt

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3- sand) and 8mm thick finishing coat of C.M. 1:1 (1- cement : 1-

sand) etc. complete.

38 145.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 1354.61 Sqmt

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for DARK shade

39 15.00 Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of 1592.40 Sqmt

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry

40 18.00 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps 900.29 Sqmt

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white cement.

41 37.00 Granite slab (telephonice Black) (18mm thick) in risers of steps dedo and 4283.41 Sqmt

pillars laid 10mm thick cement mortar 1:3 cement 3 coarse sand) and

jointed with grey cement slurry including rubbing and polishing etc.

comp. in single piece for stair steps with full molding( single piece not

more than 150cm)including, the edge& manage three groove for thread

42 174.00 Providing and laying coloured glazed tiles/Degital wall tiles of the size 1488.24 Sqmt

300mm x 300mm x 8mm / 300mm x 405mm x 8mm in skirting, risers of

steps and dedo on 1mm thick cement plaster 1:3 (1-Cement : 3-Coarse

sand) & jointed with white cement slurry.

43 27.00 Providing and laying polished Kota stone slab flooring/skirting over 2mm 1019.39 Sqmt

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing

and polishing etc. complete.(A) 25mm thick

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

44 22.00 Providing GI Pipe railling made from 50mm dia hollow made of 1185.74 Rmt

6.17kg/Rmt one black pipe medium grade 1mt c/c vertically supported

special type of bracket made from 50mm dia bla..ck medium grade pipe

with two coats of oil painting with red oxide paints etc complete vertical

support 50mm pipe.

45 1559.00 Finishing Wall with Weather Proof Exterior Emulsion Paint on Wall 120.26 Sqmt

Surface (Two Coats) to give an required shape even shade after

thoroguhly brushing the surface to remove all dirt, and remains of loose

powdered materials etc. complete

46 728.00 Applying two coats of putty & two coats of primer of approved brand and 123.44 Sqmt

manufacture on new wall surface to give an even shade with Wall painting

(two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

47 4000.00 Providing erecting fixing double coated Syntex of Equivalent PVC (ISI) 3.94 Lit

Mark Water Tank of Required Capaicty each with all necessary fittings &

connection etc.complete on Terrace.

48 5.00 Providing and fixing wash down water closet (European type, W.C. Pan) 1940.21 Nos

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (incl Seat and cover and jet

spray (A) vitreous China Pattern : (i) in white colour with plastic seat

49 5.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or 1989.70 Nos

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings. (A) Vitreous China: (ii) Flat Back washbasin

55 mm x v 4mm size. (i) In white colour. incl,C.P.brass waste 32mm dia.

PVC connection & high pressure 15mm dia. pillar tap etc.comp.

50 5.00 Providing and fixing C.P. brass shower rose with 15mm or 2mm inlet. (A) 282.16 Nos

100mm dia. Each

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

51 5.00 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets 616.42 Nos

fixed to wooden plugs with C.P. brass scews. (B) 6mm x 2mm size.

52 13.00 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jali of 586.27 Nos

the following nominal diameter of self cleansing design with C.I. Scrwed

down or hinged grating including the cost of cutting and making good the

walls. (A) 100mm diameter

53 6.00 Providing and fixing S.W. gully trap with C.I. grating brick masonry 1246.92 Nos

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight. (B) 150mm x 100mm size Pof R type

54 10.00 Constructing masonry for under ground C.I, Inspection chamberand bends 2932.93 Nos

with brick having crushing strength not less than 35Kg./Sqm in C.M. 1:5

C.I. cover with frame (light duty) 455mm x 610mm internal dimensions

total weight of cover not less than 35Kg(Weight of cover 23 Kg. and

weight of frame 12Kg) with R.C.C. top slab with 1:2:4 mix foundation

concrete 1;5:10 inside plaster 15mm thick with C.M. 1:3 finished smooth

with floating coat of neat cement slurry on walls and bed concrete etc.

comp. (A) Inside dimensions 455 x 610 and 450mm deep

55 5.00 Providing and fixing chromium plated brass half trun flush cock of 263.77 Nos

approved quality including fixing in pipe line etc. complete. (ii) 25mm dia.

56 11.00 Providing and fixing brass screw down stop tap. (A) 15mm dia. 205.83 Nos

57 4.00 Providing and fixing Gun metal check or non-return fullway wheel valve. 663.43 Nos

58 6.00 Providing and fixing Gun metal check or non-return fullway wheel valve. 420.63 Nos

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

59 60.00 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B- 876.90 Rmt

Pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to IS : 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 16mm diameter x 21mm length x 196mm high at every

2mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pies and

joints and jointed with adhesive solvent cement including cost of all

materials. (B) 110 diameter

60 88.00 Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-4) 148.12 Rmt

line including fitting as approved by Engineer-in-Charge. Pipe shall be

fixed on the wall with the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost

of all materials. (D) 40 mm dia.

61 42.00 Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-4) 91.84 Rmt

line including fitting as approved by Engineer-in-Charge. Pipe shall be

fixed on the wall with the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost

of all materials. (B) 25mm dia.

62 20.00 Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-4) 72.65 Rmt

line including fitting as approved by Engineer-in-Charge. Pipe shall be

fixed on the wall with the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost

of all materials. (a) 15mm dia.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

63 64.00 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B- 834.38 Rmt

Pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to IS : 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 16mm diameter x 21mm length x 196mm high at every

2mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pies and

joints and jointed with adhesive solvent cement including cost of all

materials.(A) 160 m dia.

64 2.00 (B) Providing sock pit of 5.00 Cu.M. Volume including excavating and 3457.27 Nos

filling brickbats with dry masonry work at top for 45cm. height

including covering the top with stone including providing vatas in C.M. 1:3

with finishing, curing etc. complete as directed.

65 85.00 Providing cement vata (1cm. x 1 cm. size) quarter round in cement mortar 24.28 Rmt

1:1 including neat cement finishing, watering etc. complete.

66 56.00 Providing and fixing concealed center point to wall ceiling & floor CPVC 170.36 Rmt

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

67 64.00 Providing and fixing concealed center point to wall ceiling & floor CPVC 253.82 Rmt

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A] 25 mm.

68 2.00 Providing and fixing SS Sink Glosy ASIS 304 Grade x 1mm thick with 2171.50 Rmt

over all size 610x460 mm & bowl size 560x410x200.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

69 105.00 Providing and fixing inter locking Paver concrete block 60mm thick with 590.27 Sqmt

grade of concrete M200 pnumatic compressed / vibrated mechanically

and as per approved design including 75 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per Directed

Engineer in charge.

70 265.00 Box cutting the road surface to proper slope and camber for making a 109.41 Cumt

base for road work including removing the excavated stuff and

depositing on the road side slope as directed upto 50Mt.lead.

71 177.00 Providing & laying compacted W.B.M 100 mm thick Grade-I of machine 1192.10 Cumt

crushed B.T.Metal of size 40 to 63mm with using 22% stone screening

13.20 mm size and 7% stone dust as a filler including spreading watering

& consolidation by vibratory roller etc.comp.

72 154.00 Rolling & watering of earthwork in layers with vibratory roller including 33.09 Cumt

filling in depressions which occurs during the process

73 61.00 Providing and casting in situ controlled cement concrete M-200 for 5408.55 Cumt

avg.200 mm thick road work laid as directed including providing and

laying M.S. side rail of road thickness with necessary nut bolts plates

fixing as per width applying plate vibrator (electric or diesel) on channel

filling joints with bitumen as directed etc.complete.As per Directed

Engineer in charge

74 180.00 Providing and fixing pre-cast concrete kerb stone of gray cement based 374.92 Rmt

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine

75 30.00 Supplying and fixing reinforced concrete heavy duty non-pressure pipes 1190.05 Rmt

with collars for culverts carrying heavy traffic as per IS 458-1991

specifications including setting the pipes in C.M. 1:2 watering and laying

(to level or slopes) of class NP3 of following internal daimeters.(ii)

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

76 4.00 Providing and fixing C.I. Cover with frame 455mm x 610mm size As per 820.84 Nos

Directed Engineer in charge.

77 8.00 Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- 2769.69 Cumt

Crushed stone aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

78 2874.00 Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or 135.34 Kg

welded in builtup for all type sections, in framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer and Two coat oil paint all complete as per the structural designs

and directions of Engineer in charge.

79 72.00 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished 734.19 Sqmt

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

limpet washer or G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

80 30.00 Drilling of 200 / 215 mm dia bore in over burden rocky or loose 418.14 Rmt

collapsible / boulder strata and lowering of UPVC / PVC / ERW casing

pipe above 12 mt and upto 40 mt depth by DTH rig etc complete

81 120.00 Drilling of 200 mm dia bore hole by DTH rig in rocky formation in All 489.85 Rmt

takuka of Zone III ( o to 350 Mtr )

82 50.00 Supply of "U" PVC Casing pipe CM type (B) 200 mm dia 1458.44 Rmt

83 2.00 Providing and fixing bail plug {Bottom Cap } Suitable for 200mm dia. Pipe 830.27 Nos

84 2.00 Heavy duty clamp made from 4" x 1.5" iron strip suitable for column pipe 242.40 Nos

1.5" to 2" length. (C) 65mm(2.1/2") dia. Pipe

85 2.00 Supplying & erecting G.l. bend for pipe connections suitable for .(E) 65 236.34 Nos

86 2.00 Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve - 1757.40 Nos

ISI marked suitable for following size (B) 65 mm dia.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

87 2.00 Supplying submersible pump set Electric motor driven borewell 43207.80 Nos

submersible pump set confirming to IS 8034 and motor confirming to IS

9283 working at 3 phase 400 / 440 volt 50 Hz AC supply & 2900 RPM.

(25) Cat o. 6.3, Discharge 400 LPM, 150 Mtr Head, 22.50 HP

88 2.00 Auto transformer starter suitable for local & remote pump control 24518.76 Nos

application consisting of Auto Transformer (vacuum impregnated, air

cooled having three (3) tappings at 50%, 65% and 80%), incomer

MCCB / MPCB, overload relay and contactors as per Type II

including digital MFM with RS 485 communication port, analogue type

ammeter with selectorcoordination switch, run hour meter, required

protective relays & control accessories.

89 160.00 Providing and erecting ISI marked PVC insulated flat submersible 195.94 Rmt

cable as per detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228.(e) 1 R x3 Core x 10 Sq. mm.

90 160.00 Providing & fixing of ISI marked HDPE Pipes suitable for potable water 131.30 Rmt

as per IS specifications no 4984/1995 including SS-316 nipple at

both ends having 11 TPI threads as per specifications, press fitted

and bolted incl all taxes, transportation, freight charges, inspection

charges, loading, unloading along with lowering and laying the pipe

including the cost of all labour & material

for 63mm dia ( PN-10) 10.00 kg/cm2 pipe.

91 2.00 Geohydrological ground water investigation including vehicle charges 14428.86 Nos

(b) For three phase DTH bore / DR tube well including water sample

testing charges.

92 2.00 Providing & erecting Monobloc pump 3 phase 400/440 volt, 50 Hz 16483.20 Nos

AC Supply & 2800 RPM as per IS 9079 at departmental stores with

following MOC: Casing: CI- FG260, Impeller: Bronze & Shaft: SS:410 @

24 Mtr head, 285 LPM Discharge, 5-HP

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

93 2.00 Supplying & erecting approved make DOL / Star Delta starter suitable 8466.83 Nos

for local & remote pump control application consisting of MPCB,

overload relay and contactors as per Type II coordination including

digital voltmeter, analogue ammeter with selector switch, run hour

meter, required protective relays & control (C) D.O.L. up to 7.5 HP

94 0.17 Clearing and grubbing road land including uprooting rank vegetation 34889.38 Hec

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of unserviceable materials (C) By

mechanical means in area of light jungle

ELECTRICAL WORK

95 33.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 485.81 Pt.

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

96 10.00 Point Wiring For Bathroom 242.91 Pt.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

97 12.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 674.68 Pt.

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected

on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

98 30.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 257.55 Pt.

pin socket erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type accessories

99 2.00 Providing following type of Modular Type Accessories mounted with PVC 160.59 Ea.

/ metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(4) TV Co-axial Socket outlet

100 20.00 (7) Blank Plate Single 25.25 Ea.

101 36.00 (9) 16 Amp. SP one way switch 180.79 Ea.

102 36.00 (10) 6/16Amp. Universal socket 199.98 Ea.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

103 330.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 24.24 Mtr.

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed

104 1.00 Supply & installation of modular type accessories for U PVC snap-on 566.61 Ea.

adaptable trunking/Pop up Box with required items erected with

necessary connection. As desired by Engineer In charge

vi) Cat-6 LAN Socket cat-III

105 725.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 82.82 Mtr.

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

106 825.00 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 112.11 Mtr.

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

107 100.00 (A) with medium class Rigid PVC pipe and accessories 147.46 Mtr.

(b) 2 wire 6 sq. mm

108 112.00 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 46.46 Mtr.

kv grade ISI marked copper wires of following size to be erected as

(e) 1.50 Sq.mm 3 core round PVC sheathed

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

109 240.00 Providing & Erecting approved make following size of TV Co-axial flexible 62.62 Mtr.

cable comprising inner conductor of solid bare copper insulated with

Foam PE & Secondary conductor made of poly - Aluminium film bonded

Al. Braids @ suitable coverage overall sheathed with black PVC

110 80.00 Supplying & erecting approved make LAN cable of following size in 47.47 Mtr.

existing pipe as per direction

111 1.00 Providing & erecting Switch board for Computer or electric apparatus 1133.22 Ea.

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

with textured/metallic /white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

112 3.00 Decorative call bell Ting-tong box type 250 volts complete erected 71.71 Mtr.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

113 5.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 165.64 Ea.

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

114 26.00 (A) Tube Light with integral driver 373.70 Ea.

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

115 4.00 Supplying and erecting led lamps with following wattage capacity of 220 112.11 Ea.

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

116 18.00 Supplying and erecting LED street light / Flood light fittings with High 4997.48 Ea.

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.

(ii) above 48 to 60 Watts

117 4.00 (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot 4819.72 Ea.

and spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories wired upto

terminal block.IP

118 12.00 (b) LED Bollard fittings of minimum height 600 mm & dia.100mm having 3161.30 Ea.

polycarbonate clear/milky diffuser mounted on 3mm thick aluminium

finished powder coated pipe with base plate 160x160mm with erection

by M8x75mm fastner with required RCC foundation.IP65 for 9 to 20 watt

,surge-4kv- cat-III

119 34.00 providing and erecting Miniature circuit breaker single pole 0.5A to 2A 270.68 Ea.

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

120 24.00 providing and erecting Miniature circuit breaker single pole 6A to 25A 112.11 Ea.

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI

121 10.00 Providing & erecting 240 V MCB double pole switch for motor & inductive 330.27 Ea.

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity

122 6.00 Plastic enclosure fitted with DIN rail suitable for incorporating One / Two 52.52 Ea.

123 2.00 Providing and erecting Sheet Steel powder coated MCB distribution board - 1152.41 Ea.

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

124 2.00 (A) single phase incoming and horizontal single phase outgoing 1492.78 Ea.

(b) sheet steel double door (IP-43)

125 4.00 providing and erecting Approved make RCCBs conforming to IS: 12640 2235.13 Ea.

and having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected

(ii) 40Amps. DP

126 16.00 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 794.87 Kg.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

127 8.00 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 368.65 Ea.

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

128 8.00 For using salt and charcoal / coke as required for pipe type earthing. 171.70 Ea.

129 4.00 Supplying & erecting earth pit of minimum bore dia.150mm size approved 4591.46 Ea.

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive compound

with high charge dissipation suitable for following type of applications

with chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

130 90.00 Length of pipe

Providing - 1 Mtr

, erecting , fabricating the M.S. structure as per requirement on 77.77 Kg.

site incorporating proper size of M.S. angles,square,round, flats, bars,

channels, sections complete with cutting, welding, grinding & finishing

duly painted with one coat of red oxide with erection on site as per

direction of engineer in charge with necessary grouting, cementing,

plastering & finishing complete.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

131 700.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 92.92 Mtr.

Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables.

(B) 2 core 6 Sq. mm

132 320.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or 74.74 Mtr.

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal

133 60.00 (B) If additional machinery like hammer driller or JCB use [Add] 357.54 Mtr.

134 392.00 Providing & laying approved make Double walled corrugated pipes 62.62 Mtr.

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosing

(A)50 mm outer dia

135 260.00 Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class- 163.62 Mtr.

3) as per IS:4984:1995 PE-80 to be erected at road crossing on or floor as

directed for laying of cable. The pipes as following size of dia & weight per

(B) 50 mm inner Dia.

136 74.00 Providing and, fixing heavy duty flange type brass cable gland with rubber 38.38 Ea.

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm

137 148.00 Solder less crimping type Aluminium lugs conforming to IS suitable for 6.06 Ea.

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts

in an approved manner.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

138 12.00 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan 1948.29 Ea.

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with earthing.(Make shall be approved

by Engineer in charge))

139 12.00 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 108.07 Mtr.

down rod erected duly painted for fan complete with proper insulation

without leakage and earthing.

140 12.00 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to 108.07 Ea.

the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

141 12.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or 18.18 Ea.

142 5.00 Supplying & erecting approved make low noise decorative exhaust fan 1703.87 Ea.

having square frame ABS body with inbuilt lowers & square frame.

200mm with 1350RPM Cat.II

143 8.00 Supplying and erecting approved make Octagonal pole made from HR 6874.06 Ea.

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to

be erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement.

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

144 26.00 Supplying & erecting approved make SMC press moulded composite FRP. 297.95 Ea.

loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements with mounting

clamp with nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.

(D) 140mm x 140mm x 100mm [deep]

145 8.00 Providing and erecting street light pole bracket comprising main B Class 561.56 Ea.

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing the brackets and

having spread of 1 mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

146 30.00 Supplying and erecting B class Galvanized iron pipe having smooth 215.13 Mtr.

finished bore of the pipe on both ends erected nuts and bolts along the

pole / wall shaping the pipe as per site requirement. Pipe dia as following.

147 2.00 Supplying and erecting Direct-on-line, Starter with 15A.rating contractor 2046.26 Ea.

and with 4-14A. range, directly operated thermal overload relay in sheet

steel enclosure for 3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete

erected on P.W. Block with necessary connection.

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

148 2.00 S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or more 20901.95 Ea.

having three phase motor capacity not more than 3 H.P. of different range

with following capacity . Lifting and Lowering taken extra.

(A) (20 stage) 170 to 185 LPM discharge at 57 to 48 mtrs. Respectively

head suitable for 50 mm dia. delivery pipe

149 2.00 Lowering of submersible motor pump set at the depth of following 2568.43 Per Job

,complete with required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking of threads of

each pipe with coupling to take the load of the pump set and pipe

assembly filled up with water

(B)Above 60 mtrs. and Up to 120 mtrs.

150 330.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 146.45 Mtr.

flexible Submersible copper cable approved make of following Size.

(C) 3 Core x 4 Sq. mm

Quantities Description of Item Estimated Rate Unit Total amount

Quantities Description of Item Estimated Rate Unit Total amount

I/We am/are willing to carry out the work at _______ % above/below percent (should be

written in figures and in words ) of the estimated rates mentioned above. Amount of my/our

tender works out as under.

*Estimated amount *Estimated amount

put to tender Rs. put to tender Rs._________________

Deduct ____ % below Rs. _________ Add ____ % above Rs. _________

Net Rs. _________ Total Rs. _________

*( Please strike out which ever is not applicable )

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In – Charge for which

no extra payment shall bemade

Note 2:-The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:-GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:-In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement

Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the

tender.amount of dismanteled material as per atteched statement Rs

TOTAL CREDIT OF ______________ will be deducted from First Running bill of Contractor

Signature of Bidder Executive Engineer