REPAIR/MAINT OF INTERNAL ELECTRIFICATION, REPLACEMENT OF UNSV WIRING IN CERTAIN OFFICERS AND JCOS/ORS MD ACCN INCLUDING FITTINGS/FIXTURES AT N AREA AND HALLOMAJRA UNDER GE CHANDIGARH.

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed.

Taking down carefully old unsv copper/aluminium sub main wiring iny size any description and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed.

Taking down carefully old unsv MCD DBs ay type and description incl MCBs and depositing into MES store yard for ruse or issue under sch of credit complete

M&L Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable in and including concealed , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS Box, 1.6mm thick with modular cover plate with frame as required at site suitable for modular switches, sockets, fan regulator etc for One light/fan point controlled by one way switch 6 amps 240 volts : Note:-1. Colour code of wiring should be (for phase -Red, Neutral-black & earth wire green) 2. Modular switch sockets fan regulators shall be meaured and paid separately udner respective items. 3. Cost of mudular MS box , modular cover plate an frame of any modules as required at site and as directed by Engineer-in-charge is deemed to be included in th quoted rates.

All as per item No 4 above but one fan point controlled by one switch and one regulator.

All as per item No 4 above but one 3 pin 6 Amps switch socket out let point on independent board

All as per item No 4 above but one 3 pin 6 Amps switch socket out let point on same board

All as per item No 4 above but one call bell point controlled by one way bell push switch

All as per item No 4 above but one light point controlled by two way switch

All as per item ser no 4 herein before but wiring with 2.5 sqmm coppr conductor for power point

Point wiring for one light point/fan point controlled by one switch with 1.5 Sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.00 Sqmm PVC insulated unsheathed copper conductor single core multi strand flexible and 1.00 sqmm PVC insulated unsheathed copper conductor single core cable (green colour as earth lead in and including concealed non metallic rigid PVC conduit medium grade with all fittings (ISI marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, iuncluding cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per item ser No 11 above but point wiring for one fan point

All as per item No 11 above but one 3 pin 6 Amps switch socket out let point on independent board

All as per item No 11 above but one 3 pin 6 Amps switch socket out let point on same board

All as per item No 11 above but one call bell point controlled by one way bell push switch

All as per item No 11 above but one light point controlled by two way switch

All as per item ser no 11 herein before but wiring with 2.5 sqmm coppr conductor for power point

S&F modular one way switch 6 Amp 240 volte suitable for one model etc complete as specified and directed.

S&F modular socket shutter suitable for 6 Amp 2/3 pin combined 250 volts complete as per specified and directed

S&F modular switches suitable for 16 Amp 240 volts complete as specified and directed

S&F modular socket shutter suitable for 16 Amp 2/3 pin combined 250 volts complete as specified and directed.

S&F modular step type fan regulator suitable for 120 watt 250 volts complete all as specifed and directed

S&F modular bell push switch 6 Amp 240 volte suitable for one model etc complete as specified and directed.

S&F in repair switch piano flush type single pole one way 6 Amp 240 volte complete as specified and directed

S&F in repair socket shutter 5 pin 6 amps flush type 250 volts complete all as specified and as directed

S&F switches piano flush type 16 Amp 240 volts complete as specified and as directed .

S&F socket shutter suitable for 16 Amp 2/3 pin combined 250 volts complete as specified and directed.

S&F step type fan regulator suitable for 120 watt 250 volts complete all as specifed and directed

S&F switch two way 6 Amp 240 volte suitable for one model etc complete as specified and directed.

S&F bell push switch 6 Amp 240 volt piano type .

M&L for call bell ding dong AC 230 Volts single pole etc complete as specified and directed

M&L for ceiling rose with three terminal as per relevant IS complete as specified and directed

S&F lamp holder pvc/polycarbonate type with back plate suitable for batten fitting complete as specified and directed

Supply and fix in repair LED lamp 9/10 watt (cool white)retrofit B 22 with polycarbonate body. (Cool while)

Supply and fix in repair LED lamp 12 watt (cool white) retrofit B-22 with polycorbonate body.

Supply and fix in repair LED retrofit INVERTER lamp 9W with 04 hrs back up time, Cool white, (lumen output not less than 900 lumens) at main supply and 450 lumns at backup , CRI more than 80,operating voltage 230 V AC 50 HZ , opeating temperature (-10⁰ C to +50⁰C), glarefree, 0 UV radiation all as specefied and directed.

Supply and fix in repair LED lamp screw type (Thread type) 8 watts (cool white)

Supply and fix in repair LED 18/20 watt (Retrofit) tube light 4 feet size (Warm white) double capped with polycorbonate body and aluminium heat sink system wattage not more than 20 watt, with surge protection device min 2 kv, CRI more than 80, glare free, power factor more than 0.9 and connection. Cat No BLRB 18 W CWC of make Bajaj or equivalent as approved by GE.

S&F in repair decorative box type fitting with blue colour end cap for LED tube 18/20 watt luminaire for 230 volt AC complete with and includidng LED tube 20 watt with inbuilt surge protection device complete all as specified & approved by EIC.

S&F in repair LED tube light decorative box type fitting TRIMLINE type complete with LED tube 36 Watts , 5700K integrated LED batten with inbuilt surge protection device

S&F in repairs energy saving new generation 10 W LED IP 65 bulkhead luminaire with opal diffuser incl 3 core flexible cord from ceiling rose to connector of fitting etc complete as specified and directed

S&F surface mounted round type energy saving ceiling mounted decorative LED 8 watt luminair luminair with opal diffuser for soft light with suitable size driver incl 3 core cable from ceiling rose to connector of fitting etc complete as specified and directed

S&F mirror light sleek LED mirror light provided with high output diffuser with suitable capacity driver with all comptonants as per manufacturer with 3 core flexible cord from ceiling rose to connector of fitting etc complete as specified and directed

S&F as in repair batten LED 22W inveter LED tube light complete fitting 230 volt energy saving, 04 hrs battery backup, CRI ≥80 more than, driver efficiency ≥ 85%, operating voltage 230 volt, 50hz operating temp (-10°C to 50°C) complete accessories internally pre wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed by engineer-in-charge. Make : Halonix/CG/Syska/Philips.

Supply and fix in repair 36 watts LED flat panel 1x4 feet glare free opal difuser recess /surface mounted complete with 36 watts LED and inbuilt surge protection device all reqd at site complete all as specified and as directed

M&Lfor sub main wiring with two single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor cable drawn into and including suitable size non metalic rigid pvc concealed conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor cable as earth wire of 2x1.50 sqmm + 1x1.50 sqmm earth wire size as in repair incl cutting and chasing and making good thw disturbed surface to match the existing complete all as directed & specified.

All as per item ser No 46 herein beore but circuit wiring with 2x2.50 sqmm + 1x2.5 sqmm.

All as per item ser No 46 herein beore but submain/ circuit wiring with 2x4.00 sqmm + 1x4.00 sqmm.

All as per item No 46 above but 2x6.0 sqmm + 1x6.0 sqmm earth wire

M&Lfor sub main wiring withfour single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor cable drawn into and including suitable size non metalic rigid pvc concealed conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor cable as earth wire of the 4x4sqmm + 2x2.5 sqmm earth wire size as in repair incl cutting and chasing and making good thw disturbed surface to match the existing complete all as directed & specified.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made 2 way SPN suitable for MCB DB's 240 Volts with neutral & earthing link bar, flush/surface mounting as in repair complete all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 6 way SPN suitable for MCB DB's 240 Volts with 100 Amps rated busbar, neutral & earthing link bar, flush/surface mounting as in repair complete all as specified and directed

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 100 Amps rated busbar, neutral & earthing link bar, flush/surface mounting as in repair complete all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 12 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting as in repair complete all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN suitable for MCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete as in repair all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way VTPN (IP43) suitable for and incl MCCB TPN 100 mps 16 KA, DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting as in repair complete all as specified and directed. Make Legrand/ABB/Hager

S&F MCB single pole ISI marked ISI Marked `B' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA as in repair etc all as specified and directed.

S&F MCB single pole ISI marked ISI Marked `B' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 40-63 Amp breaking capacity 10 KA as in repair etc all as specified and directed.

S&F MCB single pole and neutral ISI marked `B' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacityas in repair etc all as specified and directed.

S&F MCB triple pole and neutral ISI marked `B' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity as in repair etc all as specified and directed.

S&F MCCB TPN 63 Amp fixed type 16 KA fixed thermal & fixed magnatic setting suitable for 415 volts as in repair.

Supply and fix in repairs Electric water storage Heater (vertical type Geysers) 25 Ltrs BEE 5 STAR, 230 volts AC single phase with and including grouting with high tensile rag bolt, nut & washer etc as directed as per site requirement .Geysers to have glass lines tank, fero glass coated container,PUF insulation, glass coated heating element, 8 BAR rated pressurer, thermostat cut off etc.including cutting holes and making good the disturbed surface complete all as specified and as directed Make : Havells/Venus/Bajaj

M&L for in repair earthing in repair complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 4 metre deep below ground level) vertically, with top edge of the plate not less than 3.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 15 mm dia GI light grade earth lead protection pipe, complete all as specified and directed.

M&L PCC 1:3:6 Type C-1 using 20 mm graded black trap/granite/baslt stone including necesary form work for repair of earth pit complete all as specified in SSR part I and as directed by Engr-in-charge

Precast RCC type B-1 (1:2:4), using 20 mm graded crushed stone aggregate landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified. incl foam work and demolation of RCC Note :- Reinfrocement shall be measured & paid separetly.

MS TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia all as directed and specified.

S&F in repairs MCB single pole ISI marked ISI Marked `B' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA as in repair etc all as specified and directed.

S&F in repairs MCB single pole ISI marked ISI Marked `B' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 40-63 Amp breaking capacity 10 KA as in repair etc all as specified and directed.

S&F in repairs MCB single pole and neutral ISI marked `B' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacityas in repair etc all as specified and directed.

S&F in repairs MCB triple pole and neutral ISI marked `B' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity as in repair etc all as specified and directed.

S&F in repair 16 Amps power outlet board consisting of 01 No 5 pin 5/15 Amps socket with one sigle pole MCB `B' series 20 Amps 240 volts etc complete as specified and directed . Make; Anchor/havells/Indoasian

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed standard aluminiu conductor 2 core 6 sqmm in service connections suspen- ded by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular →

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor , served with inner sheathing of PVC tape and overall PVC sheathed standard aluminiu conductor 2 core 10 sqmm in service connections suspen- ded by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular →

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 core 16 sq. mm nominal cross section in service connections

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 core 25 sq. mm nominal cross section in service connections

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 3.5 core 35 sq. mm nominal cross section in service connections

M&L bus bar chamber size 40 cmx25cmx20cm with tin plated copper plated bus strip 4 nos and provision of MS gland for cable entry with locking arrangement of cap 200 amps 415 volts 50 hz partly flushed to wall and including making good to disurbed potion and colour wash to match the existing surface .

Supply and fix in repair MCCB 4 pole 100 Amps 16 KA complete with and including suitable size of MS box with locking arrangement flushed in wall complete all as specified and as directed.

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width incl cutting of road/path and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. all as specified and directed by Engineer-in-Charge including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as directed.Note : (i) Excavation shall be made carefully in order to avoid damage of existing cables and protection covers.(ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations.

Returning, filling in (soils) including spreading, leveling, watering and well ramming in layers of 25 cm thick after the cables etc. are laid, jointed and tested complete all as specified and directed by Engineer-in-Charge.

Removal of surplus excavated spoil (Soils) not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

Material & labour for sand filling with clean dry find sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed by Engineer-in-Charge.

Supply and laying of class B bricks for under ground cable protection as directed by Engineer- in - charge

Supplying, laying GI tubing, 40 mm bore, light grade as in sleeving etc laid in trenches / ducts / horizontal bore hole complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete 150 mm thich Type D-2, 1:4:8 (40 mm graded crushed stone aggregate as in repair of road/path cutting

Supply and fix in repair AC Exhaust fan 300 mm sweep high air delivery low noise complete with diffusers Make : USHA/Crompton Havells.

Supply and fix in repair wall mounting AC fan 400 mm sweep with remote control conforming to BEE star rating. Make : USHA/Crompton/Havells/Bajaj

S &F in repairs energy saving INVERTER TYPE ENERGY EFFICIENT LED street light 45 watt with RTC,with 1.5 to 2 Hrs back up period (Bty Back up with Li-ion Battery) luminaire with high power LEDs with lens of beam angle of 120 degree,luminaire made of pressure die cast aluminium housing with top openable driver compartment built in heat sinks, painted with polyurethan/powder coated paint, enclosed with toughened glass including separate compartment for cable and incl sealed/compact driver for easy access during maintenance.

S &F in repaire energy saving LED street light 25 to 30 watt luminaire with high power LEDs with lens of beam angle of 120 degree,luminaire made of pressure die cast aluminium body with built in heat sinks, painted with polyurethan/powder coated paint, enclosed with toughened glass including separate compartment for cable and incl sealed/compact driver for easy access during maintenance,suitable for operating on voltage 120 - 270 volt,AC,50 HZ,with inbuilt surge protection device having maximum discharge surge current( Imax) -10kA (8/20 µs) ,Nominal discharge surge current ( In)-5kA (8/20 µs) and protection level (Up) upto 1 kv., out put Luminous efficacy not less then100 Lumen/Watt , CRI more then 70, conforming to IP 66, class 1 complete all as per Manufacturer's specifications including taking down old unserviceable fittings of any size/ wattage complete all as directed by Engr-in-Charge.

S& F in post top decorative globe type lantern LED 30 Watt (neutral white) with high efficient LED and polycarbonate diffuser, sutable MS/die cast alumn spigot mounting assebly ,glare free conforming to IP 65 ptrotection with and incl necessary fixing arrangement complete all as specified including taking down old unserviceable fittings of any size/ wattage complete and as directed by Engineer -In-Chrge

S&F in repairsLED Bollard 10Watt with die cast aluminium housing with polycarbonate housing and cylinder diffuser IP 65 conforming to cat part No HLOB -03-10-CW of Halonix or equivalent in Cromption/Bajaj/C&S complete with 10 watts LED, Driver and surge protector including making new connection with three core PVC copper flexible cable of size 23/.0076

S&F bracket made out of 40mm dia, 1.50 mtr long GI tubing, "medium grade" ISI marked, bent to required shape and angle as per site requirement with and including MS clamps size 30 x 5mm, with nuts, bolts, washers etc for fixing street light fittings and bracket, duly painted with two coats of aluminium paint over a coat of red oxide primer including taking out existing unserviceable rusted GI bracket complete all as specified and as directed.

S&F in repair inveter type T-Beamer 10 watts LED bulb (Cool day light) retrofit Home base B-22 with polycarbonate body.Make -Philips/BAJAJ/WIPRO

Taking out old unsv meter and DB box wooden/steel any size any description, carefully after disconnecting incoming and outgoing supply from energy meters, taking out energy meters very carefully after taking reading of energy meter, marking the house no on the meter and indetifing the outgoing circuit in presence of user and MES rep. and making good the disturbed surface using brick work, cement work, plaster and colour wash to match the adjoining area of wall. Note : Cost of makig good disturbed surface in all respect is deemed to be included in the quoted rates.

M&L for fabrication and fixing of energy meter box havng IP -42 protection as per IS spections,fabicated out of CRCA sheet 2.0 mm thick ,not less then 14 gauge sheet of size 100x 60 x 30 cm having 06 compartment , 04 for fixing of single phase energy meter with one MCB SPN on DIN rail ,including provn with backalite sheet of 3 mm thick, 01 for fixing of 4 pole MCCB 63/100 amps as incomer and one for three phase TPN bus bar complete with and including 01 No 4 pole MCCB 63 Amps 16 KA with adjustable thermal magnetic protection 0.7 to 1.0 times of current rating , Copper Bus bar of 200 amps TPN mounted on epoxy insulators . Each compartment should have independent non breakable glass cover in upper half portion for taking the reading with locking arrangement . Meter box shall be semi glossy finish with powder coated sprayed paint and baked at high temprature. Meter box shall be fixed on wall incl making nitch in walls and making good the surface complete all as specified and directed .

Supply and fix in repair moulded case circuit breaker 4 pole 63 Amps 16 KA electromagneic thermal release for overload and short circuit protecion adjustable type in suitable sheet metal enclosure with and incl 02 Nos MS gland for incoming and outgoing cable of size 4 C 16/4C 25 sqmm complete all as specified and as directed .

Supply and fix in repair moulded case circuit breaker 4 pole 100 Amps 16 KA electromagneic thermal release for overload and short circuit protecion adjustable type in suitable sheet metal enclosure with and incl 02 Nos MS gland for incoming and outgoing cable of size 4 C 25/3.5 C 50 sqmm sqmm complete all as specified and as directed.

S&F Minitature Circuit Breaker single pole and neutral ISI marked `B' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 63 Amps 10 KA breaking capacityas in repair etc all as specified and directed.

S&F Minitature Circuit Breaker triple pole and neutral ISI marked `B' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 100 Amps 10 KA breaking capacity as in repair etc all as specified and directed.

Material and labour for submain wiring with four single core PVC insulated flexible copper conductor cable of size 4x 10 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2x 10 sqmm as earth lead in & including surface/ concealed PVC conduit light grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engineer - in - Charge.

Material and labour for submain wiring with four single core PVC insulated flexible copper conductor cable of size 4x16 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2x 16 sqmm as earth lead in & including surface/concealed PVC conduit light grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engineer - in - Charge.

Supply and fix in repairs Rigid non metallic PVC conduit of size 25 mm ext dia exclusive of boxes (junction/terminals) but inclusive of all tees bends elbow reducer, bell mouth tube end and fixing accessories such as coupler lock , nuts saddles pipes hook etc.

Supply and fix in repairs Rigid non metallic PVC conduit of size 32 mm ext dia exclusive of boxes (junction/terminals) but inclusive of all tees bends elbow reducer, bell mouth tube end and fixing accessories such as coupler lock , nuts saddles pipes hook etc.

All as per Item No 04 but wiring with 4.00 Sqmm nominal area cable for 20 Amp socket outlet three pin Independent point with 4.00 Sqmm copper conductor for earthing (green colour).

S&F Switch piano two way 6 Amps 240 volts complete all as specified ISI marked,

All as per item No. 46 here-in-before but 2x10 Sqmm earth wire

S&F sheet metal enclosures single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole Minitature Circuit Breaker 240 volts 20 Amps, complete all as specified.

S&F in repair electronic digital wireless bell operated on 240 volts AC with operating range 100 mtrs in open air complete with remote push button with 12 volts 23 A battery.

S&F in repair decorative box type fitting with blue colour end cap for LED tube 20 watt luminaire for 230 volt AC incl LED tube 20 watt with inbuilt surge protection device complete all as specified & approved by EIC.

S&F in repair LED tube light decorative box type fitting TRIMLINE type complete with LED tube 36 watts, 5700K integrated LED batten and inbuilt surge protection device.

S& F recess mounting/ Sleek suspended white powder coated aluminium housing,LED 2x2 feet luminaire36Watt suitable for armstrong POP ceiling with separate electronic driver & high brightness natural white LED. complete, including suspension assembly as complete all as specified and as directed

Supply and fix in repair 36 watts LED flat panel 1x4 feet glare free opal difuser recess /surface mounted complete with 36 watts LED and inbuilt surge protection device all reqd at site complete all as specified and as directed

S& F recess/surface mounting/ LED slim round/square downlighter with glare free opal diffuser 12Watt suitable for armstrong POP ceiling with separate electronic driver & high brightness natural white LED. Complete. including suspension assembly

Supply , fixing and connecting Mirror light LED 8/9/10 watt, 1 ft long. Cat No BCLSB 10 WH of make Bajaj or equivalent as approved by GE.

S&F in repairs energy saving new generation 10 W LED IP 65 bulkhead luminaire with opal diffuser incl 3 core flexible cord from ceiling rose to connector of fitting etc complete as specified and directed Make-Bajaj/Crompton/Halonix/C&S

S&F in repair LED engagement lights box prewired with Red and Green LED bulb 03 Watts each with holders complete all as specified and directed by Engineer -in-charge

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (single door) 2 way SPN suitable for Minitature Circuit Breaker DB's 240 Volts , neutral & earthing link bar, flush/surface mounting complete all as specified and directed. Make Legrand/ABB/Indoasian/Siemens/C&S/Havells

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way SPN suitable for Minitature Circuit Breaker DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed. Make Legrand/ABB/Indoasian/Siemens/C&S/Havells

Supply and fixing in repair Energy Meter tamper proof LED Display with out optical port , single phase , AC 230 Volts 10 to 60 Amps cap in position complete with incoming and outgoing cable connection with suiable size of copper cable and copper lugs complete all as specified and as directed Make L&T cat part No WM 301 BC 6D20 or equivalent in Scure Metre

Supply and fix in repair temper proof polycarbonate cover for single phase energy meter with non brakable glass in front

Supply and fixing in repair Energy Meter tamper proof LED Display with out optical port , three phase , AC 440 Volts 20 to 60 Amps cap in position complete with incoming and outgoing cable connection with suiable size of copper cable and copper lugs complete with tampre proof ploycarbonate enclosure with non breakable glass in front complete all as specified and as directed Make L&T / Scure Metre

Supply and fix in repair temper proof polycarbonate cover for three pahse energy meter with non breakable glass in front

Supply and fix decorative box type LED retrofit INVERTER fittings 20 watts complete with 04 hrs back up time, Cool white, (lumen output not less than 900 lumens) at main supply and 450 lumns at backup , CRI more than 80,operating voltage 230 V AC 50 HZ , opeating temperature (-10⁰ C to +50⁰C), glarefree, 0 UV radiation all as specefied and directed. Make : Halonix/Bajaj/Crompton/Wipro

LONGIA ENGINEERS

Arun enterprises

Electromech Engineers