Construction Of (Iconic Road) Road From Natraj Fatak to Arunoday Circle Road (Vegetable Road) At Morbi Municipal Corporation Area, Morbi (3rd Attempt)

Name of Work :- Construction Of CC Road (Iconic Road) From Natraj Fatak to Arunoday Circle Road (Vegetable Road) At Morbi Municipal

Corporation Area, Morbi

=// Bill of Quantities //-

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

1 0.88 Clearing and grubbing road land including uprooting rank vegetation grass Hect 39725.53 Rupees Thirty Nine

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and Thousand Seven Hundred

disposal of unserviceable materials(D) By mechanical means in area of thorny jungle. Twenty Five Paise Fifty

2 12660.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful Cum 304.11 Rupees Three Hundred Four

materials and disposing off the excavated stuff for all lead.(C) Hard Murrum Paise Eleven Only

3 8820.00 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of Cum 327.03 Rupees Three Hundred

useful materials and disposing off the excavated stuff for all lead.(C) Hard Murrum Twenty Seven Paise Three

4 1320.00 Providing and laying compacted WBM (in two equal layers of 175mm thick) of Cum 1107.97 Rupees One Thousand One

B.T.M.C.metal of size of size 40 to 63 mm in required layers including using 13% stone Hundred Seven Paise Ninety

screening 13.20 mm size and 7% stone dust as filler including spreading watering and Seven Only

consolidation by vibratory roller etc complete.

5 660.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone Cum 3095.25 Rupees Three Thousand

aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Ninety Five Paise Twenty

Foundation and Plinth Five Only

6 11200.00 Kerbing Small: Providing and fixing pre-cast concrete kerb stone of gray cement based Rmt 374.92 Rupees Three Hundred

concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per Seventy Four Paise Ninety

approved design and including excavation for fixing in proper line and level,filling the joint Two Only

with C:M 1:3 (1cement:3fine sand) etc complete.

as selected by Engineer in charge.

7 7480.00 Providing and fixing pre-cast punch design rubber molded only artificial cobble concrete SqM 706.93 Rupees Seven Hundred Six

stone 60mm thick with grade of concrete M250 pnumatic compressed / vibrated mechanically Paise Ninety Three Only

and as per approved design including 35 mm Sand layer for levelling and filling the joint with

only sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. design

and pattern must be as selected by Engineer in charge.

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

8 504.00 Preparing the land by filling fertile/ selected garden soil, including leveling & fine dressing Cum 108.07 Rupees One Hundred Eight

and mixing manure/bio tech fertilizer/ fertilizer and termite treatment as per requirement. Paise Seven Only

9 840.00 Plantation of flower bed with selected flower plant as suggested by Engineer in charge SqM 441.37 Rupees Four Hundred

including planting the same at 60 CM apart and growing the same including maintenance Fourty One Paise Thirty

upto six months. Seven Only

10 1600.00 Providing tree plants having minimum 1.20 mt height and health growth of bottle palm tree, No 10.10 Rupees Ten Paise Ten Only

Cycus palm and other palm tree or any big trees as suggested by Engineer in charge planting

including 30 x 30 x 30 Cm. pit filling with selected garden soil including manure, fertilizer

and maintenance upto six month.

11 1600.00 Providing and fixing 1.80 mt. height and 45 cm dia round Treeguard by using No 858.50 Rupees Eight Hundred Fifty

20mmx20mmx3mm size vertical MS angle and 50x50mm 10 guage welded steel mesh Eight Paise Fifty Only

framing on 20x3 mm MS flats and 20x5 cm MS sheet name plate as per design incl. one coat

of primer and two coats of oil painting etc. complete.

12 133.00 Brickwork using common burnt Clay building bricks having crushing strength not less than Cum 4526.81 Rupees Four Thousand Five

35 kg./Sq.Cm. in Super structure in Cement Mortar 1:5. (1- Cement : 5 -fine sand) in Ground Hundred Twenty Six Paise

Floor Eighty One Only

13 1152.00 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single walls for SqM 161.20 Rupees One Hundred Sixty

plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1- One Paise Twenty Only

cement :4-sand)

14 6732.00 Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface SqM 80.80 Rupees Eighty Paise Eighty

with synthetic enamel paint in all shades on new plastered concrete surfaces) as per Only

instructions given by engineer in charge.

15 4900.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for Rmt 3468.34 Rupees Three Thousand

culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes in Four Hundred Sixty Eight

C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal Paise Thirty Four Only

daimeters.(v) 900mm dia.

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

16 196.00 Providing and Fixing pre cast RCC M-200 chamber for underground chamber Precast No 16102.38 Rupees Sixteen Thousand

Cement Concrete M20 Grade grate cover with frame (Heavy duty 35 tonne Capacity ) One Hundred Two Paise

750mm x 750mm Clear opening total weight of cover with frame to be not less than 100Kg. Thirty Eight Only

(Wt. of cover 72 Kg.and Wt. of frame 28Kg. ) foundation concrete 1:3:6 , and 20 cm thick

wall all side with M200 Concrete . (Pre cast also can aprooved) with both side of inlet and

outlet connection of 600 mm dia. pipe (i) Inside dimensions 1000mmx 1000mm and

1800mm deep(avg) for single pipe line.

17 4737.00 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. Cum 136.92 Rupees One Hundred Thirty

in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and Six Paise Ninety Two Only

18 2.00 Place identification vertical sign :-Providing and fixing retro Reflective Hi Intensity Micro No 26340.75 Rupees Twenty Six

Prismatic Grade Board using 2mm Aluminum / 4mm ACP, 300mm thick brick masonary Thousand Three Hundred

wall Descaling and degreasing the board as per requirement using epoxy reflactive process Fourty Paise Seventy Five

by screen painting as directed etc. complete including transporting and fixing on C.C. 1:2:4 Only

with necessary excavation curing etc. complete as per I.R.C. 67-2012 design. A warranty for

2 years for the Retro reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-4(MDR/ODR) retro reflective sheeting

Design and pattern must be selected by engineer in charge.

19 6.00 Direction sign (Junction board):-Providing and fixing retro Reflective Hi Intensity Micro No 7610.66 Rupees Seven Thousand Six

Prismatic Grade Board using 2mm Aluminum / 4mm ACP, angle post 150mm dia x 6mm Hundred Ten Paise Sixty

thick. Descaling and degreasing the board as per requirement using epoxy reflactive process Six Only

by screen painting as directed etc. complete including transporting and fixing in C.C. 1:2:4

with necessary excavation curing etc. complete as per I.R.C. 67-2012 design. A warranty for

2 years for the Retro reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-4(MDR/ODR) retro reflective sheeting Design and

pattern must be selected by engineer in charge.

20 1360.00 Road marking with Hot applied Thermoplast compound with reflectorising glass beads on SqM 367.72 Rupees Three Hundred

bitumineous surface and laying of hot applied thermostatic compound 2.5mm thick including Sixty Seven Paise Seventy

reflectorised glass beads @ 250 grams / sq.mt. area, thickness of 2.5mm is exclusive of Two Only

surface applied glass beads as per IRC 35. The finished surface to be level uniform and free

form streaks & holes, With 2 Years Warrenty

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

21 1700.00 Cat Eye : Supplying of Molded Twin Shanks Raised Pavement Markers made of No 326.23 Rupees Three Hundred

polycarbonate and ABS moulded body and reflective panels with Micro prismatic lens (No Twenty Six Paise Twenty

Glass bead lens) capable of providing total internal reflection of the light entering the lens Three Only

face and shall support a load of 13635 kgs. tested in accordance to ASTM D4280 Type H and

complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 -

DO II Dt 11.06. 1997. The height, width and length shall not exceed 20 mm, 130 mm and

130 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base

shall be 35 +/-5 degree. The strength of detachment of the integrated cylindrical shanks, (of

diameter not less than 19 +/-2 mm and height not less than 30+/- 2 mm) from the body is to

be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to

go inside, without nails and using epoxy resin based adhesive as per manufacturer's

recommendation and The color of the marker should be as per the IRC 35-2015 and as

directed by Engineer-in-charge.

22 20.00 Providing, Supplying and installation of Dustbin ISI material of container is 200 Ltr as No. 12625.00 Rupees Twelve Thousand

directd by engineer in charge. Six Hundred Twenty Five

23 2.00 Providing, Fixing of Xtreme Media 5000 Nits Brightness, Outdoor Die Cast Aluminium Led No 191900.00 Rupees One Lakh Ninety

Display System, Length of LED Display System (cm) 391 - 400 Height of LED Display One Thousand Nine

System (cm) 191 - 200 Brightness -Calibrated Minimum (Nits) 5000 Life of Light Source Hundred Only

(Hours) 100000, Type of LED Display system Outdoor Material of the Cabinet Die Cast

Aluminium Aspect Ratio 16:9 LED Configuration RGB 3 in 1 SMD Maximum Pixel Pitch

(mm) 10 Length of LED Display System (cm) 391 - 400 Height of LED Display System (cm)

191 - 200 Maximum Depth of LED Display System (cm) 15 Pixel Density Minimum (Per

Square Metre) 28477 Horizontal Resolution (Pixel) 810 Vertical Resolution (Pixel) (in mm)

324 Horizontal Viewing Angle (degree) 160 Vertical Viewing Angle (degree) 160 Refresh

Rate (Hz) 3840Response Time (milliseconds) 10 Frame Frequency 50-60 Hz Brightness -

Calibrated Minimum (Nits) 5000 contrast Ratio 10000:1 Uniformity of Brightness across the

Screen 95 Gray Scale Processing (Bit) 16 Life of Light Source (Hours) 100000 Dimming

Capability 256 levels Fanless Design Yes Availability of Data Power Redundancy No Mean

Time Between Failure (MTBF)(Hours) >10000 IP Rating (Front) IP65 Maintenance Rear

Duty Cycle 24x7 Availability of Smart PDU Yes LED Make Nationstar Power Input (Volt)

230Vac +/- 10%, 50-60 Hz Maximum Power Consumption 1 Per Square Meter)

Mounting Arrangement Wall/Pole Availability of Receiver Card Yes Earth Leakage Current

24 1417.00 Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for Kg 131.83 Rupees One Hundred Thirty

all type sections, in framed work, including cutting, hoisting, fixing in position and applying a One Paise Eighty Three Only

priming coat of approved steel primer all complete as per the structural designs and directions

of Engineer in charge.Column ( 122 x 61 x 3.6mm )

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

25 2200.00 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI Mtr. 50.60 Rupees Fifty Paise Sixty

marked copper wires of following size to be erected as directed. e) 1.50 Sq.mm 3 core round Only

26 200.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea. 5976.17 Rupees Five Thousand Nine

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Hundred Seventy Six Paise

and corrosion free High pressure die cast aluminum housing with smooth finish powder Seventeen Only

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Decorative Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (iii) Above 60 to 90 watts Cat III

27 230.00 Supplying and erecting approved make Decorative Conical Pole (Standard ) Made from HR Ea. 10828.21 Rupees Ten Thousand Eight

sheet steel. The pole should be made as per IS. and shall be coated with hot dip galvanizing as Hundred Twenty Eight

per IS 2629/2633/4759 with required base plate and integral Junction box consist of terminal Paise Twenty One Only

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting,

stud type terminal and arrangement for cable terminationas erected on suitable foundation

(included) with necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement.The length of poles are as below.(E) 7 Mtr. Long 65mm Top

X170 mm bottom dia, 3mm thickness.

28 1.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea. 17843.67 Rupees Seventeen Thousand

breaking capacity ICU of 35 KA. at 415 V. having Normal current rating 200A.with variable Eight Hundred Fourty Three

Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Paise Sixty Seven Only

connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing (with

enclouser) ICS=100% of ICU only Cat III

29 3.00 Supplying KITKAT pattern porcelain cut-out fuse with base of following current capacity Ea. 420.16 Rupees Four Hundred

erected on existing block board. (vi) 200 A. 500 V. Twenty Paise Sixteen Only

30 100.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on Ea. 112.11 Rupees One Hundred

240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. Twelve Paise Eleven Only

confirming to IS 8828/1996 with ISI Mark Cat.III

31 3.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having Ea. 737.30 Rupees Seven Hundred

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity(c) Thirty Seven Paise Thirty

63 Amp. Cat.III Only

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

32 1.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface Ea. 1680.64 Rupees One Thousand Six

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Hundred Eighty Paise Sixty

IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used Four Only

of same company of MCB to be used) suitable for (A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door (IP-43) (v) 16 way

33 1.00 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having Ea. 4314.72 Rupees Four Thousand

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Three Hundred Fourteen

operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping Paise Seventy Two Only

with all advance feature & do not incorporate any electronic component for following Max.

rating erected as directed.(iv) 100 Amps. FP (100 mA Sensitivity) Cat. III

34 1.00 Providing and erecting metallic vitrified danger notice board as per language suggested by Ea. 69.69 Rupees Sixty Nine Paise

engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551. Sixty Nine Only

35 200.00 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. Kg. 77.77 Rupees Seventy Seven Paise

Seventy Seven Only

36 1.00 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Ea. 4591.46 Rupees Four Thousand Five

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot Hundred Ninety One Paise

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner Fourty Six Only

pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound

:- Earthing compound should be capable to retain moisture for long time Necessary test

report must be submitted by Agency. (a) For Electrical Installation up to 440V in normal

soilLength of pipe - 1 MtrBack filling compound - 1 Nos Bag of 15 Kg.

37 230.00 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised Ea 368.65 Rupees Three Hundred

iron pipe with coupling and buch buried in specially prepared earth pit complete with Sixty Eight Paise Sixty Five

necessary 8 SWG earth wire. Only

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

38 1.00 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated sq.mtr 10468.65 Rupees Ten Thousand Four

indoor type cubical panel board necessary IP-42 and above protection as per approval from Hundred Sixty Eight Paise

engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 Sixty Five Only

SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements & instruction of engineer-in-charge with erection

of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall

be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall

be measured excluding base beams) The panel shall be supplied with following approved

manufacturers with following size. (A) locally fabricated panel board (i) with 350 mm depth

39 25.00 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating Kg. 77.77 Rupees Seventy Seven Paise

proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, Seventy Seven Only

welding, grinding & finishing duly painted with one coat of red oxide with erection on site as

per direction of engineer in charge with necessary grouting, cementing, plastering & finishing

40 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts

41(a) 45.00 (e) One wire 6.00 sq. mm Mtr 53.53 Rupees Fifty Three Paise

Fifty Three Only

41(b) 10.00 (i) One wire 35.00 sq. mm Mtr 286.84 Rupees Two Hundred

Eighty Six Paise Eighty

41 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe

of following size of cables

42(a) 10.00 (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Mtr. 281.79 Rupees Two Hundred

Eighty One Paise Seventy

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

42 5400.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid mtr. 124.23 Rupees One Hundred

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing Twenty Four Paise Twenty

trench / pipe of following size of cables(B) 4 core 6 Sq. mm Three Only

43 5400.00 Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the Mtr. 46.46 Rupees Fourty Six Paise

fault all over the run and back filling the same and making the surface as normal ground. Fourty Six Only

44 20.00 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the Mtr. 295.93 Rupees Two Hundred

road crossing or on floor with necessary material in an approved manner and making the Ninety Five Paise Ninety

ground as per original. (D) 250 mm dia Three Only

45 5400.00 Providing & laying approved make Double walled corrugated pipes (DWC) of Mtr. 62.62 Rupees Sixty Two Paise

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same Sixty Two Only

material at required depth in existing trench for laying of cable. below ground / road surface

for enclosing cable (A)50 mm Outer dia

46 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

47(a) 10.00 (A) 1.5/ 2.5/4/6 Sq.mm Ea. 6.06 Rupees Six Paise Six Only

47(b) 4.00 (D) 35/50 Sq.mm. Ea. 20.20 Rupees Twenty Paise

47 230.00 Supplying and erecting B class Galvanized iron pipe having smooth finished bore of the pipe Mtr 215.13 Rupees Two Hundred

on both ends erected nuts and bolts along the pole / wall shaping the pipe as per site Fifteen Paise Thirteen Only

requirement. Pipe dia as following.(B) 32 mm dia

48 230.00 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- Ea. 515.10 Rupees Five Hundred

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail Fifteen Paise Ten Only

for mounting mob & hinged doors as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps&

earth bolt of following size of box. (B) 250mm x 200mm x 100mm [deep]

49 100.00 Providing and erecting street light pole bracket comprising main B Class GI pipe of 4.2 Ea. 614.08 Rupees Six Hundred

cm/require outside dia. complete with suitable B Class G.I sleeve tubing of approx. Fourteen Paise Eight Only

45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per

site condition & suitable welded stiffener reducer and nipple with check nut complete painted

with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint

with following nos of arms.

[A] Single Arm bracket 1 Mtr (Decorative type)

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

50(a) 50.00 [B] Double Arm Bracket 1 Mtr (Decorative type) Ea 829.21 Rupees Eight Hundred

Twenty Nine Paise Twenty

50 1.00 Supplying & erecting approved make Digital time switch having lithium cell 6 years operative Nos 3168.37 Rupees Three Thousand

and operate battery backup 1 channel day clock with 14 memory programme, suitable to One Hundred Sixty Eight

operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 Paise Thirty Seven Only

minimum & LCD display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

51 Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per

direction Cat III

52(a) 1.00 (D) 4 pole 440V 40 Amp. Ea. 2782.55 Rupees Two Thousand

Seven Hundred Eighty Two

Paise Fifty Five Only

52 Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S.

Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in

ground to have appropriate erection to work uniform until erected with cement concrete

foundation and 45 cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and outside looking arrangement with look

and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with

nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS 2147 of

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Item No. Quantitie Item of Works Unit Estimated Rates Total Amount

Estimated Rs. in Rs. In Words Accourding to

Figure Estimated

53 1.00 (A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron legs Ea. 16691.26 Rupees Sixteen Thousand

95 cm long made from 40 X 40 X 6 mm thick MS angle. Six Hundred Ninety One

Paise Twenty Six Only

Amount in Words :

Rupees Five Crore Twelve Lakh Four Thousand Five Hundred Fourty Nine Paise Fifty Six Only

A FIXED Amount of total dismentalled credit ₹ 0.00 shall be recovered from running Bill in which dismental item will recorded for payment.

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Total Rs. …………………… Net Rs…………………..

In words……………………………… In words……………………………………….

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

All furnising item must be aprooved by engineer in charge

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

[3] Income tax TDS will be deducted at a source while making payments of bills.

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.

[5] Testing of materials charge paid by contractor

[6] Samples to be sent by contractor to GERI.

Consultant : Signature of Contractor