Providing Supplying Erecting and Commissioning of High Mast Tower and LED Street Light for Various Location In Gariyadhar Dist Bhavnagar Under 15th Finance Commission Grant Year 2020-21 (Untied) And Year-2022-23 (Untied) (General Grant) (SC-SP Grant)

NAME OF WORK:- SUPPLYING, ERECTING AND COMMISSIONING OF HIGH MAST TOWER

(12.00 MT. HIGHT) AND LED STREET LIGHT AS PER VARIOUS LOCATION IN GARIYADHAR.

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

Total Amount Rs…....

Total Amount Rs…....

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should

be writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works out

Estimated Amount Estimated Amount

Put to Tender Rs. 54,42,009=00 Put to Tender Rs. 54,42,009=00

Add % Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Gariyadhar Nagarpalika

AMRELI Gariyadhar

Chief Officer President

Gariyadhar Nagarpalika Gariyadhar Nagarpalika

Gariyadhar Gariyadhar

GARIYADHAR NAGARPALIKA - GARIYADHAR

DIST:- BHAVNAGAR

SCHEME:- 15TH FINANCE COMMISSION GRANT YEAR-2020-21 (UNTIED)

NAME OF WORK :- SUPPLYING, ERECTING AND COMMISSIONING OF HIGH MAST TOWER (12.00 MT. HIGHT)

LOCATION :- Rupavati Road, At Gariyadhar

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying, erecting, testing, commissioning approved make M.S. Polygonal

High Mast Pole having following general Specification. (a) Polygonal Section

fabricated from M.S. Plate confirms BSEN 10025 & Hot deep galvanized

minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with ring and

rubber lines for erection of luminaries of suitable site. (b) Maximum telescopic

section not more than four (c) Double drum gear pipe motorized winch with

6mm dia S.S. Rod (For 16 mtr and above size) (d) Approved make L.E.D.

aviation light = 1 No. Lightening arrestor = 1 No. with necessary wiring of

sq.mm 5 core ISI copper cable Unarmoured. (e) Bottom most section suitable

for mounting reversible motor and switchgears having door not more than

1400mm x 300mm with waterproof gasket & hinges & locking arrangement. (f)

Pole structure comprises suitable size of reversible motor, cable and

necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports ribs

foundation bolts nuts etc. (h) Item not comprises the cost of lanterns. (i)

Necessary Cement Concrete foundation as per IS including testing &

commissioning of the entire structure for following size of High Mast poles [1]

High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of Sec. No.

- 1, Bottom Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm

thick, Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos., Suitable for

mounting Fitting of Light - 6 Nos. 1.00 162858.46 No

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt. LED driver efficiency> 85% as

per approved vender list make.(fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-voltage protection.

(vii) above 200 to 250 watts Cat-lll 6.00 8724.38 No

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

/Solid Aluminium conductor for 1.1 KV.to be laid on wall with necessary

clamps or in existing trench/pipe of following size of cables (A) 4 core 10 Sq.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.

dia. galvanised iron pipe with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth wire. 1.00 368.65 No

For using salt and charcoal / coke as required for pipe type earthing. 1.00 171.70 No

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have appropriate erection to work

Item No. & Description Quantity Rate Per Amount

uniform until erected with cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other

with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside

and out side with three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP 55 test & followed by

IS 2147 of 1962 (C) 60 X 30 X 45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm long made from 35 X 35 X

mm thick MS angle. 1.00 1884.66 No

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.

(A) (approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Inst llation up to 440V in normal

soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg. 1.00 4591.46 No

Supplying & erecting approved make time switch with single pole air break

contacts suitable for 230 V.15/16A.complete with self starting motor driven

clock ‘ON’ &’ OFF’ automatic arrangement at any predetermined time during

each 24 hours,With nickel cadmium rechargeable battery backup erected as

directed. 1.00 2354.31 No

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity. (b) 40 Amp. Cat.III 1.00 702.96 No

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over the run

and back filling the same and making the surface as normal ground. 40.00 73.73 Rmt

Providing & laying approved make Double walled corrugated pipes (DWC of

polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (B) 63mm outer dia 45.00 74.74 Rmt

Disconnecting the cable connection and Providing straight joint with PVC

mould using heat shrink /cast resin type epoxy compound Insulating material

and making the joint complete using necessary in line connectors, hardener,

earth continuity connection, spacers etc. and reconnecting the same & ensure

the joint resistance within the limits as per IS. (A) up to 25 Sq mm Cable 1.00 1083.73 Each

Total Amount Rs..........

Total Amount Rs..........

Stamp with Signature of Contractor

Cons. Engineer Engineer Chief Officer President

DESIGN POINT Gariyadhar Nagarpalika Gariyadhar Nagarpalika Gariyadhar Nagarpalika

Amreli Gariyadhar Gariyadhar Gariyadhar

GARIYADHAR NAGARPALIKA - GARIYADHAR

DIST:- BHAVNAGAR

SCHEME:- 15TH FINANCE COMMISSION GRANT YEAR-2020-21 (UNTIED)

NAME OF WORK :- SUPPLYING, ERECTING AND COMMISSIONING OF HIGH MAST TOWER (12.00 MT. HIGHT)

LOCATION :- Sarita Society, At Gariyadhar

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying, erecting, testing, commissioning approved make M.S. Polygonal

High Mast Pole having following general Specification. (a) Polygonal Section

fabricated from M.S. Plate confirms BSEN 10025 & Hot deep galvanized

minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with ring and

rubber lines for erection of luminaries of suitable site. (b) Maximum telescopic

section not more than four (c) Double drum gear pipe motorized winch with

6mm dia S.S. Rod (For 16 mtr and above size) (d) Approved make L.E.D.

aviation light = 1 No. Lightening arrestor = 1 No. with necessary wiring of

sq.mm 5 core ISI copper cable Unarmoured. (e) Bottom most section suitable

for mounting reversible motor and switchgears having door not more than

1400mm x 300mm with waterproof gasket & hinges & locking arrangement. (f)

Pole structure comprises suitable size of reversible motor, cable and

necessary switchgears with control panel.

(g) bottom section shall have suitable size of thickness supports ribs

foundation bolts nuts etc. (h) Item not comprises the cost of lanterns. (i)

Necessary Cement Concrete foundation as per IS including testing &

commissioning of the entire structure for following size of High Mast poles [1]

High Mast 12 Mtr. TOP A/F 105 mm, BOTTOM A/F 360mm, No. of Sec. No.

- 1, Bottom Thickness - 3 mm, Size of Base Plate - Dia 520 mm x 20 mm

thick, Foundation Bolt Size M24 x 850 mm, Qty - 6 Nos., Suitable for

mounting Fitting of Light - 6 Nos. 1.00 162858.46 No

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt. LED driver efficiency> 85% as

per approved vender list make.(fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-voltage protection.

(vii) above 200 to 250 watts Cat-lll 6.00 8724.38 No

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

/Solid Aluminium conductor for 1.1 KV.to be laid on wall with necessary

clamps or in existing trench/pipe of following size of cables (A) 4 core 10 Sq.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.

dia. galvanised iron pipe with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth wire. 1.00 368.65 No

For using salt and charcoal / coke as required for pipe type earthing. 1.00 171.70 No

Supplying & erecting IP 55 grade following size section pillar fabricated from

joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with

cable clamps to be buried in ground to have appropriate erection to work

Item No. & Description Quantity Rate Per Amount

uniform until erected with cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door internally supported on both

side, with internal and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other

with nut and bolt for erecting Bakelite sheet. Painting the Section Pillar inside

and out side with three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP 55 test & followed by

IS 2147 of 1962 (C) 60 X 30 X 45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm long made from 35 X 35 X

mm thick MS angle. 1.00 1884.66 No

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.

(A) (approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Inst llation up to 440V in normal

soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg. 1.00 4591.46 No

Supplying & erecting approved make time switch with single pole air break

contacts suitable for 230 V.15/16A.complete with self starting motor driven

clock ‘ON’ &’ OFF’ automatic arrangement at any predetermined time during

each 24 hours,With nickel cadmium rechargeable battery backup erected as

directed. 1.00 2354.31 No

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity. (b) 40 Amp. Cat.III 1.00 702.96 No

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over the run

and back filling the same and making the surface as normal ground. 40.00 73.73 Rmt

Providing & laying approved make Double walled corrugated pipes (DWC of

polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (B) 63mm outer dia 45.00 74.74 Rmt

Disconnecting the cable connection and Providing straight joint with PVC

mould using heat shrink /cast resin type epoxy compound Insulating material

and making the joint complete using necessary in line connectors, hardener,

earth continuity connection, spacers etc. and reconnecting the same & ensure

the joint resistance within the limits as per IS. (A) up to 25 Sq mm Cable 1.00 1083.73 Each

Total Amount Rs..........

Total Amount Rs..........

Stamp with Signature of Contractor

Cons. Engineer Engineer Chief Officer President

DESIGN POINT Gariyadhar Nagarpalika Gariyadhar Nagarpalika Gariyadhar Nagarpalika

Amreli Gariyadhar Gariyadhar Gariyadhar

GARIYADHAR NAGARPALIKA - GARIYADHAR

DIST.- BHAVNAGAR

SCHEME : 15TH FINANCE COMMISSION GRANT YEAR-2022-23 (UNTIED) (GENERAL GRANT)

NAME OF WORK : PROVIDING & ERECTING LED STREET LIGHT

FOR VARIOUS LOCATION CHART OF SCHEDULE-B-3

Sr. No. Location No.

1 Sitaramnagar Street

2 Mohannagar Street

3 GEB Bajrangnagar Street

4 Nr.M.D Patel High School Street

5 Nr.Shivshakti Plot K.V School Street

6 Nr.Khodiyarnagar K.V School Street

7 Kailashnagar Street

8 Sandhisheri Street

9 Kotval Chock Street

10 Bhidbhanjan Plot Daya lakha vadi Street

11 Khatrini Bhui Bharvad Street

12 Bhagatni Jagya Area

13 Vaghani Street

14 Bharvad Street-Khatri Fui

15 Ramapir Temple Area

16 Fatkadi Vadi Street

17 Khodiyarnagar-Panchtobra Road

18 Tolpan Street

19 Kubharsheri 1,2

20 Hanuman street

21 Shubash road

22 Ratanvava road

23 rajkuva street

24 sambhu street

25 rajyaguru street

26 jala pa street

27 kotvali street

28 bhairavnath chock petrol pump

29 manekchok miyanimedi

30 dodiyasheri shubashroad

31 shethsheri javahar road

32 shree mali street

33 meman street

34 rajput street

35 Vankarvas street

36 Pathan Street

37 Satish vidio street

39 dobariya street

40 borda vadi street

41 Government Quarter Behind Mam.office

42 Shantinagar Society

43 Bachukaka plot

44 Daya harkhano plot

45 shivamnagar plot

46 Taluka panchayat Quarters

47 Brahaman society

48 Valamnagar Street

49 Mohannagar Street

50 Deplapara Street

51 Gandhi Shoping Centre

52 Government Hospital plot

53 Shaktiplot street

54 fulvadi Street

55 Dhobi ghat street

56 Vaghani Street

57 jivani street

58 roysheri street

59 bharvad street

60 derasar vibhag

61 gaushala street

64 bhairavnath plot

65 dhankuva plot

66 Sukhnath plot

67 sukhnath Garden

68 sadbhavna society

69 khodajadav vadi

70 alpa society

72 mantri society

73 dadmiya vadi

75 bramaninagar-1

76 sarita society

77 khodiyarnagar

Stamp with Signature of Contractor

Consl. Engineer Municipal Engineer

"DESIGN POINT" Gariyadhar Nagarpalika

Amreli Gariyadhar

Chief Officer President

Gariyadhar Nagarpalika Gariyadhar Nagarpalika

Gariyadhar Gariyadhar

GARIYADHAR NAGARPALIKA - GARIYADHAR

DIST:- BHAVNAGAR

SCHEME:- 15TH FINANCE COMMISSION GRANT YEAR-2022-23 (UNTIED) (GENERAL GRANT)

NAME OF WORK :- PROVIDING & ERECTING LED STREET LIGHT

LOCATION :- Various street in side Ward No.1 To 7 gariyadhar Nagarpalika

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminium housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85% as per approved

vender list. (fittings required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

shown.) (iii) above 24 to 36 watts Cat-lll 744.00 1801.07 Ea

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD <10%, CCT 3000 K to 5700K, Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt. LED driver efficiency > 85 %. as

per approved vender list make (fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (ii) above 48 to 59 Watts Cat-lll

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable

1.1 KV.grade to be erected as directed of following size.(A) 2 core 2.5 Sq.

Providing and erecting Street Light pole bracket comprising main B Class GI

pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the brackets and having

spread of 1.5.mtr. length with 110 deg.with vertical plane & suitable welded

stays, reducer and with check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [A] Single Arm Bracket 1.5 Mtr 250.00 683.77 Ea

Total Amount Rs..........

Total Amount Rs..........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Gariyadhar Nagarpalika

AMRELI Gariyadhar

Chief Officer President

Gariyadhar Nagarpalika Gariyadhar Nagarpalika

Gariyadhar Gariyadhar

GARIYADHAR NAGARPALIKA - GARIYADHAR

DIST.- BHAVNAGAR

SCHEME : 15TH FINANCE COMMISSION GRANT YEAR-2022-23 (UNTIED) (SC-SP GRANT)

NAME OF WORK : PROVIDING & ERECTING LED STREET LIGHT

FOR VARIOUS LOCATION CHART OF SCHEDULE-B-4

Sr. No. Location No.

1 Khodiyarnagar-3 nani vavdi Road

2 Khara kanthe, Nr. Juni Chinani bhathi

3 Valmiki nagar

9 Jalaram Society

11 Devipujak vas

14 bilkhiya society

15 mafatnagar-1

16 mafatnagar-2

17 mafatnagar-3

Stamp with Signature of Contractor

Consl. Engineer Municipal Engineer

"DESIGN POINT" Gariyadhar Nagarpalika

Amreli Gariyadhar

Chief Officer President

Gariyadhar Nagarpalika Gariyadhar Nagarpalika

Gariyadhar Gariyadhar

GARIYADHAR NAGARPALIKA - GARIYADHAR

DIST:- BHAVNAGAR

SCHEME:- 15TH FINANCE COMMISSION GRANT YEAR-2022-23 (UNTIED) (SC-SP GRANT)

NAME OF WORK :- PROVIDING & ERECTING LED STREET LIGHT

LOCATION :- Various street in side Ward No.1 To 7 gariyadhar Nagarpalika

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminium housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85% as per approved

vender list. (fittings required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

shown.) (iii) above 24 to 36 watts Cat-lll 614.00 1801.07 Ea

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD <10%, CCT 3000 K to 5700K, Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt. LED driver efficiency > 85 %. as

per approved vender list make (fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (ii) above 48 to 59 Watts Cat-lll 278.00 4245.31 Ea

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable

1.1 KV.grade to be erected as directed of following size. (A) 2 core 2.5 Sq.

Providing and erecting Street Light pole bracket comprising main B Class GI

pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve

tubing of approx. 45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the brackets and having

spread of 1.5.mtr. length with 110 deg.with vertical plane & suitable welded

stays, reducer and with check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [A] Single Arm Bracket 1.5 Mtr 149.00 683.77 Ea

Total Amount Rs..........

Total Amount Rs..........

Stamp with Signature of Contractor

Consl.Engineer Engineer

"DESIGN POINT" Gariyadhar Nagarpalika

AMRELI Gariyadhar

Chief Officer President

Gariyadhar Nagarpalika Gariyadhar Nagarpalika

Gariyadhar Gariyadhar