Provn of certain sanction work at Phase 6 of various units at Tezpur area under GE S Tezpur

Amount

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed.

Taking down chowkhats including shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed.

Taking down Shutters of any description, not exc 1.00 Sqm Each, and keep in Safe Custody for removing to store, complete all as specified and as directed.

Taking down Shutters of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each and keep in Safe Custody for removing to store, complete all as specified and as directed.

S&F Composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction complete all as specified and as directed.

S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick prelaminated PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F Factory made PVC solid moulded Door Shutter, 30 mm thick with board core (styles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed.

S&F 35mm thick 2nd class hard wood factory made flush shutter solid core construction with block board core and plywood face panels commercial type of both side complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter open rebated and prepared to receive glass, gauze etc (without sash bars) edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Pt I clasue 8.24 (a) complete all as specified and directed.

S&F MS 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drwan steel spring complete all as specified and directed.

S&F Stainless steel butt hinges 100 mm long complete all as specified and directed.

S&F 150mm long stainless steel handle, decorative type, complete all as specified and directed

S&F Stainless steel barrel tower bolt 150mm long complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing/ plat form made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S & F Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Power coated aluminium frame 50 microns for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Power coated aluminium door shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws etc.complete all as specified and directed.

S&F Power coated aluminium 50 microns window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed.

S& F 5.0 mm thick sheet glass ordinary/tinted/ Filmed to match existing quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares complete all as specified and directed.

S&F 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares complete all as specified and directed.

S&F Figured Glass 4.0mm thick, Pin Head / frosted type and glazing with Wooden Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, as in repair complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S & F Aluminum Mortice lock verticle type 75 mm 4 levers complete all as specified and directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L Non skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm screed bed in Cement mortar (1:4) complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.38 sqm, in Skirting/ Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Coloured Glazed ceramic tiles 600 x 300 mm x 7 to 8 mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed with epoxy filler to match over 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Virified Ceramic tiles 8 to 10 mm thick premium quality (square/ rectangular) light shade, polished, area of each tiles exc 0.36 sqm but not exceeding 0.72 sqm (1200X600mm approx), in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match the shade over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.72 sqm, in dado /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 18 to 20mm thick Granite stone (of any type) work (table rubbed and polished) in cooking platforms and like fixed in cement mortar (1:4) including edge moulding and pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) for in skirting/border with 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks over compacted sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for Vitrified parking tiles of any colour/patern 40cm x 40 cm x 7 to 10 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors and over 15 mm thick screed bed in CM 1:4 for laying floor finishes complete all as specified and as directed.

Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, or removing to store, complete all as specified and as directed.

Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removing to store, complete all as specified and as directed.

Taking up or down Steel Water Tubing 25mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, or removing to store complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed.

S&F 15mm bore CPVC pipes of pressure rating 10 kgf/cm2 fixed complete towalls, ceilings or in floors incl conceiling/ clamping etc., complete all as specified and directed.

S&F 20mm bore CPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors incl conceiling/ clamping etc., complete all as specified and directed.

S&F in repair vitreous china counter type/Table Top Basin size 500X435X180 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. Make :- Jaguar or equivalent as approved.

M & L, 15mm thick rendering in C.M (1:4) on fair faces of brick work finished even and fair without using extra cement all as specified and directed

Dismantling Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed.

M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in slab, shelves supported on walls beam & coloumns in floor roof including balconies, canopies, deck slabs & shelves complete all as specified and directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and as directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L Reinforced Cement Concrete Type B1 (1:2:4) (20mm graded crushed stone aggregate) in Columns, Pillars, Piers, Posts and Struts, etc. complete all as specified and as directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L Formwork to sides of Pillars, Posts, Struts, Piers, Columns and stanchions, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Beam Haunchings, Girders, Bres-Summers, Lintels, Cantilevers, Shelves including supports, overhangs, etc. also splays between floors and beams, etc., flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Formwork to Soffits of suspend slab such as Roof slab, Floor slab, landings and similar works horizontal or sloping etc., not exceding 200mm thick ,flat rough finished surfaces of concrete, complete all as specified and as directed.

M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed.

M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge.

M&L Brick work (old size) with sub class 'B' bricks in CM (1:6) , straight or curved on plan exc 6 mtr nean radius, using old size bricks complete all as specified and as directed.

Material and labour for sub class B bricks, bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n exc. 15 cm thickness (below or above the ground level) (Un-reinforced) and removing to a distance not exc 50 meter complete all as specified and as directed by Engr-in-Charge.

M&L Plain Cement Concrete type D2 (1:4:8) using 40 mm graded aggregate as in Foundation, Filling and Mass Concrete, complete all as specified and as directed.

M/L PCC 1:2:4 type B1 using 20mm grade aggregate as in coping, leveling course or similar work complete all as specified and as directed by Engr-in-Charge.

M & L for 100mm thick PCC 1:4:8 ( 40 m graded stone aggregate) as sub base Path/paving even and rough to recieve the topping layer complete all as specified and as directed by Engr-in-Charge.

M&L 75mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.2 mtr & filled with bituminous filler complete all as specified and as directed.

M&L 50 mm thick,Cement concrete, type C-2, (1:3:6), 40 mm graded aggregate as in floor making rough to receive toping layer complete all as specified and as directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fix, in repair, waste coupling CP 32 mm dia for glazed wash basins etc with fly nuts flanged etc complete all as specified and directed.

S&F in repair 15mm dia Stop valves fancy type chromium plated, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair 15mm bore two way bib cock cast copper alloy CP Fancy type ,with wall flange screwed down for iron pipe or union , complete all as specified and directed.

Supply and fix, as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F Chromium plated toilet paper holder fixed with walls including necessary fittings etc as in repair complete all as specified and as directed.

S&F Towel Rack chromium plated fixed with walls including necessary fittings etc as in repair complete all as specified and as directed.

S&F Chromium plated Corner glass shelf with bracket fixed with walls including necessary fittings etc as in repair complete all as specified and as directed.

S&F Sink made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 15mm bore health faucet (ABS body) with 8mm Dia, 1.2 m long flexible tube & wall Hook complete all as specified and directed.

S&F Tubular Towel rail chromium plated 600mm long 20mm dia D type with chromium plated brass screws complete all as specified and as directed.

S&F PVC (SWR) floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) multi floor trap 75 mm size with grating including jointing with solvent cement complete all as specified and as directed.

S&F 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including neccessary packing, union and cap and fixed complete all as specified and ditected

Supply and fix 15 mm bore Basin Mixture without Popup Waste system with 450MM long Braided Hoses Model No ALI-85011B make Jaquar complete all as specified and ditected.

S&F Angular stop cock cast copper alloy CP with wall flange for 15mm bore Model No:CON-059KN ,Make: Jaquar or Equivalent complete all as specified and ditected.

Supply and fix, shower water drainage floor bathroom grating with CP/SS 304 Anti foul cockroach proof of size 100X600 mm complete all as specified and as directed by Engr-In-Charge.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) single piece with PP soft close seat cover, hinges, duel flush chistern fitting and complete accessories set in white colour Cat part No CNS-WHT--851P180SPP make Jaquar complete all as specified and as directed by Engr-In-Charge.

S&F Shower pannel of model JPL-BLK-JA011 of make Jaquar incl 750mm to 900mm long shower arm complete all as specified and as directed by Engr-In-Charge.

S&F Automatic soap dispenser of capacity 0.8 ltr of aluminium/Abs with chromium finish complete all as specified and directed. cat part No SDR BLC -DJ0160 AS of Jaquar complete all as specified and as directed by Engr-In-Charge.

S&F Flash touch free infared hand dryer with 1150 W rated poer &carbon brush motor of stainless steel body complete all as specified and as directed by Engr-In-Charge. Make- Jaquar cat part No HDR-SSF-AK2807 AS

S&F Jaquar Corner Shower Enclosure 3 Part JSE-CHR-840L2428H19X complete as per manufacture's instructions complete all as specified and as directed by Engr-In-Charge.

S&F PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

S&F 5 mm thick mirror with decorative frame of size of face size 40 to 50 mm mounted on 10 to 12 mm water proof plywood and fixed in to chromium plated / stailess steel cup washers of approved pattern complete all as specified and as directed by Engr-In-Charge.

Demolition of reed lathing, single or double including battens and plasters or checken wire lathing complete all as specified and as directed by Engr-In-Charge.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.

M&L 15mm thick rendering in CM (1:4) on one side of lathing finished even and smooth without using extra cement including 0.71mm chicken wire and size of mesh 12mm complete all as specified and as directed.

M&L 15 mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1.0mm thick water proof wall care putty by smart painting method including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Acrylic emulsion Paint over a coat of primer and applied over 1mm thick water proof wall care putty by smart painting method including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Complete removal of existing Treatment of old decorated Surfaces of Ceiling and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1mm thick water proof wall care putty by smart painting method including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed.

M&L Applying one coat of Acrylic distemper by smart painting method to old wall surfaces of walls and cornices including preparation of old decorative surface and removal of smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed.

M&L Applying one coat of Acrylic Emulsion distember by smart painting method to ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,scraping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed.

M&L Complete removal of existing treatment and appplying two coats of weather coat(Apex) over two primer coats of damp shield primer by smart painting method to old plastered walls as per manufacturer instruction including properly fillings the cracks with putty and appllied by approved applicator complete all as specified and directed.

M&L for Old wall surface including properly preparation/removal of existing paint surface and fillings the cracks with exterior wall care putty and pigment and applying one coat of weather coat water proofing paints by smart painting method as in boundry wall, single , double and triple storey bldg, complete all as specified and as directed by Engineer-in-Charge.

M&L Preparing new Surfaces of Walls and appplying two coats of weather coat (Apex) over one coat of primer coats of damp shield primer by smart painting method as per manufacturer instruction including properly fillings the cracks with putty and applied by approved applicator complete all as specified and directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing new Steel or Iron Surfaces of any description, exe 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide, Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, nexc 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

S&F Continuous (piano) hinges, 30 mm width of flaps ,mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F as in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

Supply and fix magnetic catch suitable for cabinets and shelves, fixed with screws Make : Kaizon or equvalent. complete all as specified and directed.

S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangement complete all as specified and directed.

S&F Towel ring of size 150mm dia decorative type fixed with walls including necessary fittings etc complete all as specified and as directed.

Supply & fix in repair 20-25mm dia stainless steel curtain rod with two Nos of brackets and decorative end knobs complete for doors/window opening complete all as specified and directed.

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L 10-12mm thick clear toughened glass for doors incl fixing accessories for frame in opening "including locking assembly, Two handles for each shutter, etching as approved pattern etc" as per manufacture's instructions complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Supply and fix, as in repairs, grating round/ Square 100/75 mm dia size of stainless steel complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Steel work in tubular truss including Post of different size bend to shape, cut to length etc, including necessary welding,special shape washer, roller conforming to IS:1161-1998 grade St-240 complete all as specified and as directed.

S&F Solid PVC particle board consisting of 18-20 mm thick prelaminated PVC sheet inclusive of solvent cement and fixing at site complete all as specified and as directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as in post or truss (cut to ordinary lengths i.e. within 20mm of the length indicated) , conforming to Fe 410 -W (Gde E- 250) quality-A complete all as specified and as directed.

S&F Rolled sections as in main cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or connecting plates cofirming to Fe-410-w (Gde-E250) quality-A complete all as specified and as directed.

Mild Steel plates, plain or chequered, 5mm thick or over in thickness in available sizes for base plates and cleats Fe 410-W (Gde-E 250) qua lity-A complete all as specified and as directed.

M&L Mild Steel Screw Bolts (machine made) 5mm to 10mm diameter of neck and length of bolt exc 5 Cm and not exc. 10 Cm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick of prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Dismanting timber boarding of any description fixed in any position complete all as specified and as directed.

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work complete all as specified and as directed.

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and as directed.

Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in unframed Work, complete all as specified and as directed.

M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section Clean swan, secured with Nails, cross sectional area exc 6.0 Sqcm but not exc. 13.0 Sqcm, complete all as specified and as directed.

Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.55mm and 32mm x 24mm x 0.55mm with 1.5mm dia double GI suspendor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss any type of truss complete all as specified and as directed.

S&F 6-10 mm thick PVC hollow panels with to 0.5 mm plain PVC sheet suitably placed in Wall including same and matching colour wall angle , u clip, end elip and jointer . As in ceiling and walls including aluminium frame work fixed to wall or wooden scantling vertically and horizontally at an interval complete all as specified and directed directed by Engr-in-Charge.

Surface Excavation not exc. 30 Cm deep and ave. 15 Cm deep and getting out in Soft/Loose Soil, complete all as specified and as directed.

Excavating in post holes(or similar holes) each 0.50cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in soft/loose soil.for fdn etc complete all as specified and as directed.

Returning, filling incl spreading levelling watering and well ramming in layers not exc 25 cm for soft/lose soil. complete all as specified and as directed.

Removing excavated material n exc.50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M & L for Hardcore of broken stone or boulders guage n exe. 63mm deposited spread and levelled in layers n exe 15 CM thick watered and rammed to a true surface complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylin -drical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/ unserviceable Water Storage Tank of any description, complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F PTMT Ball Valve 25mm dia having mini -mum weight 455 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and fixed, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of existing wall for wall taking out concealed conduit and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed.

Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed.

M&L Concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FRLSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FRLSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed. Note- (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (ii) Cutting Chases pinning shall deemed to be included in the quoted rate. (iii)The cost of Blanking plate if required shall deemed to be included in the unit price.

All as per item No. 159 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed.

All as per item No.159 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed.

All as per item No.159 here - in - before but for 5 Amps socket point on the same board controlled by one switch complete all as specified and as directed.

S&F Modular switch flush type, 6 Amp, one way ,1 module complete all as specified and as directed.

S&F Modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and as directed.

S&F Modular switch, 16 Amp flush type 1 module complete all as specified and as directed.

S&F Modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and as directed.

S&F Modular Fan Regulator stepped type 2 module ,120W complete all as specified and as directed.

S&F Ceiling rose surface backelite three terminals complete all as specified and as directed.

M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

All as per item No. 169 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable.

All as per item No.169 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable

All as per item No. 169 here - in - before but for 5 Amps socket point on the same board controlled by one switch.

M&L for switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and as directed.

M&L for switch socket out let 2 in one, 5 Amps, 240 Volts flush type, complete all as specified and as directed.

M&L for switch socket combination 2 in One , 3 pin 5 Amps & 16 Amps flush type, universal complete all as specified and as directed.

S&F Ceiling fan regulator electronic Step type, solid state, , 240 volts, complete all as specified and as directed.

S & F Lamp holder insulated body PVC/polycarbonate with back plate and 7 W LED bulb suitable for batten fitting complete all as specified and directed.

Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate housing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and including connection complete all as specified and directed.

Supply and fix LED tube light fitting of 9 W with tube (2 Ft) 240 V Wall mounted LED batten polycarbonate housing and integrated electronic driver with high efficient LEDs 9 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and including connection complete all as specified and directed.

Supply and fix for Recessed mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, complete all as specified and directed.

S&F Wall security light luminaire for 1x15 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor complete all as specified and directed.

S&F Steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coats of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one complete all as specified and directed.

Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and as directed.

S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 12 way with common bus bar at incomming end complete all as specified and directed.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed.

S & F MCB 'C' series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed.

S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed.

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed.

S&F Motor starter for 32 Amps 2 modules including modular MS flush box and cover plate 2 module complete all as specified and directed.

Taking down old burnt/unserviceable sub main wiring with aluminum/copper conductor PVC insulated cable of any size drawn through PVC casing caping/ PVC Conduit pipe including GI wire accessories etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

Taking down carefully ceiling fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl blades refixing the fan in same position including all electrical connection and material and labour for replacement of two nos split pins, one connection block and one rubber seal complete all as specified and as directed.

Material and labour for painting of ceiling fans complete of any sweep/make with one coat of first quality synthetic enamell paint of approved tint by spray including preparation of old painted surface and removing all dust, oil mark etc and filling cavaties with filler materials,and writing serial / MES number as specified (with paint of black colour with each letters/figures in Block of height n.exc2 cm ) complete all as specified and as directed.

M&L Pvc exhaust fan of size 250 mm sweep, single phase,230volts Ac with louver shutter /grill and connection complete incl cutting hole and making good disturbed surface and necessary fixing arrangements complete all as specified and directed by Engr-in Charge.

Supply and fixing wall mounting hi-flow and heavy duty fan with all accessories of Size 400 mm sweep, 230 volt Ac with connection from existing celing rose complete all as specified and directed by Engr-in Charge.

Supply and fixing wall mounting hi-flow and heavy duty fan with all accessories of Size 300 mm sweep, 230 volt Ac with connection from existing celing rose complete all as specified and directed by Engr-in Charge.

S&F Metal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm or 2nd class hard wood wooden board including complete electrical connection by proper size of copper lugs complete all as specified and directed by Engr-in Charge.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core complete all as specified and directed. Note: 1. Excavation and earth work will be measured and paid seperately under relevant item

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 2 core complete all as specified and directed. Note: 1. Excavation and earth work will be measured and paid seperately under relevant item

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M&L Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work electrical plate No. 3 of SSR part - I complete all as specified and directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

M/S SM ENTERPRISE (BID ID -3278693)

M/S MOHANPASARI (BID ID -3283066)

MAHENDRA BARUAH (BID ID -3279046)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3279318)