SPECIAL REPAIRS TO AIRMEN BILLETS AT MAKARPURA

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but exceeding ashlar facings, dressed stonework and precast concrete articles

Taking down chowkats or frames (without taking of shutter from the frame) not exc. 1.5 Sqm each.

Taking down chowkats or frames (without taking of shutter from the frame)exc. 1.5 Sqm but n. exc. 4 Sqm each

Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish outside MD land complete.

Taking down cement plaster on brick or stone walls or PCC block walling or concrete surface including raking out joints hacking for key scrubbing down with water etc.

Taking down 15 mm bore GI water tubing including all fitting complete from wall/floor all as specified

Taking down 20 mm boreGI water tubing including all fitting complete from wall/floor all as specified

M&L Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread levelled and rammed including watering complete

M&L PCC 1:3:6 type C1 (20 mm graded stone aggregate) as in platform etc , roof kerbs or mud stops, rounded or chamfered on edges complete all as specified

M&L PCC in 1:5:10 type E2 (using 40mm graded agg) as in sunken floor of toilet complete all as specified

M&L Reinforced cement concrete type A1, 1:1 1/2 :3 ( 20mm graded stone aggregate) in chajjas complete all as specified

M&L Brick work with sub class 'B' bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified

M&L Use and waste of form work to chajjas including edges as in flat fair finished surfaces all as specified and directed.

S&F 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified

S&F 2nd class hard wood 35mm glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc (with vertical sash bars), edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass etc size of membrane of shutter as specified in SSR part I, Section 8, clause 8.20 (a) and fitted to chowkats complete all as specified

S&F 35 mm thick flush doors, solid core with prelaminated exterior grade with both side decorative choice lamination with lipping/frame to match incl. all necessary fittings etc complete all as specified

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with square tube, complete all as specified

S & F 30 mm thick(style) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottomrails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of Single side prelam PVC sheet used instead of plain colour PVC sheet and having one side feathered edge and on other side 10mm 90 bent edge to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement,fixing in frames at site all as per specification complete all as specified

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 75 mm long aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed all as specified

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified

S&F 75mm size butt hinges medium weight cold rolled mild steel and fixed (ISI Marked) all as specified

S&F 100mm size butt hinges medium weight cold rolled mild steel and fixed (ISI Marked) all as specified

S&F 300mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F 150mm long aluminium handles, cast type, anodised complete all as specified

S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beadings complete all as specified.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete as in repairs all as specified

M & L TMT bars 10 mm dia and over, out to length , bent to shape required , including crancking , bending , spirally for hooping for colums hooking ends and binding with mild steel (annealed ) not less than 0.9 mm dia or securing with clips complete all as specified.

S & F Anodised powder coated avg coating of coating 60 Micron aluminium frame for doors, windows, ventilators (powdercoated) with one or more rebates including jointing cleat for fixing etc, complete all as specified

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm including cleaning surfaces in sunken portion and laying APP polymer modified fiber glass reinforced membrane 3mm thick 3.5Kg/Sqm (modified bituminous water proofing membrane) with plain polythene finish and sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane by torching the same all as per manufacturer instruction all as specified and as directed

M&LSealing of cracks by applying two coats of Hydroseal IPN Resin & Hardener or equvalent in the grooves with spray gun or suitable brush in proportion of 1.0 Resin (I.P.N) :1 Hardner (I.P.N) by weight. and filling the cracks with the Hydroseal putty in the proportion of 1.0 Resin (I.P.N) :1.0 Hardener (I.P.N) : 4.0 Admixture Q.S. by weight and applying top coat of Hydroseal IPN Resin & Hardner in proportion of 1.0 Resin (I.P.N) :1 Hardner (I.P.N) by weight complete all as manufactures instruction

M&L Pressure shortcreting 25mm thick in cement concrete 1: 1: 2 (Nomonal mix) including necessary scaffolding to all affected area of RCC structure up to 18.75 m height complete including scaffolding as required all as specified and as directed.

M & L Filling of cracks by grouting apoxy as specified specified below and as per manufactures instructions:- (a) Removal the plaster if any (100mm to 150mm wide along the crack) incase of non-exposed RCC work and Make 'V' grove along the crack. (b) Drill hole of suitable diameter and 35mm to 50mm (or more if required) deep @ 300mm to 500mm c/c along the crack. (c) Clean the grove and hole with wire brushes and air blower. It should be made dust, oil and grease free. (d) Seal the crack with epoxy putty and fix the 10mm dia internal) PVC ports injection with epoxy putty. (e) Inject Moisture insensitive low viscous epoxy resin (Conbextra EP 10 M of FOSROC or other makes given in PS) with the pressure pumps through the injecting port on lower level of the cracks. Injecting shall be continued till the injecting material starts flowing from another port on higher level and the process shall be repeated on next port till injecting is done in all ports along the cracks. (f) After setting of epoxy grout cut the injectinion port at least 2 mm below the surface, cleaning etc. complete. (The quantity of the Epoxy Resin actually consumed at site shall be accounted for the payment)

M&L Drilling 16mm dia holes in old concrete upto depth not less than 150mm cleaning the holes by blower and injecting grouting chemical of make-HILTI product HY-150 or equivalent into the holes & inserting 12 mm dia TMT bars into holes all as per manufactures instructions Note :- TMT bars will be measured and paid seperately.

M & L Applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M of FOSROC or other makes given in PS) on corroded reinforcement with the help of wire brush and treating it with rust remover (reebaklens RR) including throughly cleaning, eashing, air blowing, brushing etc. including scaffolding as required complete all as per manufactures instructions Note : (Quantity of Zinc based epoxy rust preventor only shall be taken into account for payment purpose on the basic of actual consumptionand quoted rates shall be deemed to be inclusive of this aspect.)

M&L 20 mm thick granite (of any type) work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeall as specified.

M&L Machine cut kota stone slab for treads 20-25mm, uniform thick including moulding for nosing and making two line on top and single piece for one tread, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L Kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L Grinding and mirror polishing of old surface of kota stone and matching with existing or new surface complete all as specified

M&L 75 mm thick cement concrete type D-2 1:4:8 as in sub base (40mm graded stone agg) complete all as specified.

M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)as in floor finished even and smooth with out using extra cement complete all as specified

S &F Glazed ceramic coloured tiles in vertical surface 450 x 300 mm 7-8 mm thick white set and jointed in neat cement slurry and pointed in white cement to match on and including 10mm thick rendering in cement mortar 1 :4 as backing coat, to receive tiles etc complete all as specified.

M&L Non skid coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match on and including screed bed 15mm thick in CM (1:6) complete all as specified

M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including supply and mixing water proofing compound @3% by weight of cement finished even and smooth (without using exra cement) in sunken portion all as specified.

M&L 5 mm thick rendering in cement mortar 1:3 , finished even and smooth without using extra cement as in celing complete all as specified

M&L10 mm thick rendering on fair faces of concrete surfaces in CM 1:4 and finished even and smooth without using extra cement all as specified.

M&L Rendering 15mm thick on concrete surface in two layers, first coat 10mm thick in CM 1:6 and second coat 5mm thick in CM 1:4, second coat including supply and mixed with water proofing compound @ 3% by weight of cement all as specified.

M&L Prepration of plastered or unplastered surfaces on walls,ceiling and applying two coats of white wash on walls all as specified.

M&L Complete removal of existing treatment of wall and applying two coat of oil bound distemper over a coat of primer over two coat of birla white putty as per manufacturers specification all as specified.

M&L Complete removal of existing treatment of ceiling and apply two coat of oil bound distemper over two coat of birla white putty as per manufacturers specification all as specified.

M&L Preparation of new plastered or unplastered surfaces of walls and applying two coat of exterior emulsion paint overa coat of primer all as specified and directed

M&L Complete removel of existing treatment on plastered or unplastered surfaces of walls and applying two coat of exterior emulsion paint over a coat of primer all as specified

S&F 4.8 mm thick sun reflective tinted glass fixed with and including necessary rubber gasket and aluminium beading all as specified

S&F 4.8 mm thick frosted on one side sheet glass fixed with and including necessary rubber gasket and aluminium beading all as specified

M&L Preparation old decorated steel surfaces of any description not otherwise described exceeding 10 cm width or girth and applying one coat of synthetic enameled paint including cleaning glass,joinery etc. of drop & splashes all as specified and directed by Engr-in-Charge

M&L Preparation new or previously untreated steel surfaces of any description not otherwise described exceeding 10 cm width or girth and applying two coat of synthetic enameled paint over a coat of red oxide including cleaning glass,joinery etc. of drop & splashes all as specified and directed by Engr-in-Charge

M&L Preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

M&L 15mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified

M&L 20mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified

Disconnecting existing PVC tanks, setting aside (or lowering if required ) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position incl cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc of capacity exc 500 litres and n.exc 1000 litres all a specified

S&F 1000 Ltr capacity over head Rotational, 3 layer moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including suitable float valve fixed to 20 mm bore pipe completed as in repairs all as specified.

S&F Bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of pipe complete as in repairs all as specified

S&F Pillar taps, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shank and fly-nut, screws for iron pipe and fixed for 15mm dia of pipe as in repairs complete all as specified

S&F Angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe as in repairs complete all as specified.

S&F Concealed stop cock with adjustable wall flange, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe as in repairs complete all as specified

S & F 25 mm bore Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed as in repairs complete all as specified

S & F 20 mm bore Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed as in repairs complete all as specified

S & F Ball valves 25 mm bore high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight15mm-142gms / 20mm-210gms / 25mm-455gms / 40mm-690gms) as in repairs complete all as specified

S & F Nipple suitable for HDPE water tank 25 mm bore . (mimimum weight 15mm-38gms / 20mm-45gms / 25mm-65gms) as in repairs complete all as specified

S & F Shower arm 15mm size 195 mm long with bend of 45 degree with flange of PTMT any colour(Min weight 40 gms).

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F PVC connection 15mm dia with PTMT nut of length 450mm long complete

S&F Vitreous china squatting pan water closet ‘orissa’ pan size 580x440mm including Integral foot rest and cement concrete bedding etc complete as in repairs all as specified.

S&F Grating square 150mm size of PTMT (Minimum weight 25 gms) in repairs

S&F PVC (SWR) pipes 110mm dia single socketed,in any length with rubber ring joints fixed to walls) complete as in repairs all as specified

S&F PVC (SWR) pipes 75 mm dia single socketed,in any length with rubber ring joints fixed to walls) complete as in repairs all as specified

S&F PVC (SWR) bends110mm dia any radius,as in repairs complete all as specified

S&F PVC (SWR) bends75 mm dia any radius,as in repairs complete all as specified

S&F Cast iron nahani trap 75mm outlet dia with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) as in repairs complete all as specified

S&F Brass chromium plated shower rose 125mm size any colour for fixing with 15mm pipe as in repairs complete all as specified

S&F PVC valve less Symphonic action type low level flushing cistern, 10 Litre Capacity,white with inlet,ball valve, float and handle including bracket complete as in repair all as specified

S & F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including fixing with fushing cistern as in repairs complete all as specified

S&F Vitreous China wash basin, white, flat back, size 580x450mm (for Hospilal use) including cutting for and pinning in ends of brackets or erecting stand as in repairs complete all as specified

S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) as in repairs complete all as specified

Taking down carefully unserviceable aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc.

M&L Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including modular metal flush box made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of modular white cover plate over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch for the following:- Note : (i) Switch, socket and fan regulators to be measured and paid for separately (ii) PVC Conduit confirming to IS 9537 part I & III

(a) One light / fan / exhaust fan point controlled by one switch

(b) Socket outlet point 5 Amp on same board.

(c ) Socket outlet point 5 Amp on Independent board.

(d) One light point controlled by two, 2 way switches

All as per item No.94 here in before but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified.

S&F Modular switch, single pole one way 6 Amps, 230 volts AC circuit complete all as specified & directed by Engineer-in-Charge

S&F Switch modular type single pole two way 6 Amp 240 volt complete as directed.

S&F Modular switch, single pole one way 16 Amps, 230 volts AC circuit complete all as specified & directed by Engineer-in-Charge.

S&F Modular socket outlet, 6Amps, 3 pin, 230 volts AC circuit complete all as specified & directed by Engineer-in-Charge.

S&F Modular socket outlet, 6-16Amps, 5 pin, 230 volts AC circuit complete all as specified & directed by Engineer-in-Charge

S&F Fan Regulator 5 step Modular type 240 Volts complete all as specified

S&F Lamp holder B-22 base, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified.

S&F Bulb LED 12 Watt suiable for holder B-22 base complete all as specified.

S&F Ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

S&F Indoor decorative channel housing fitting slim LED batten 18 Watt with polycarbonate housing and diffuser AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable from ceiling rose to connector of the light, fixing the same with two Nos PVC square box complete as in repairs all as per specified and directed.

S&F Indoor decorative aesthetically designed Mirror light provided with high output PMMA diffuser for glare free light including LED lamp ( 10 watt) with provision of 2/3 core PVC copper conductor cable from ceilling rose to connector block , fixing the same with two Nos PVC square box complete as in repairs all as per specified and directed.

S&F Energy saving LED light fitting 10 Watt Bulk head luminairecomplete with all acessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size 230 Votls as in repairs complete all as specified and directed

S&F LED security light luminaire 20 watt freedom , pressure die cast aluminum housing, heat resistant glass, IP66 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete as in repairs all as specified and directed

S&F Bracket for security light made up of 25mm dia,1.60m long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete as in repairs complete all as specified and directed

S&F MCB DB 4 way double door vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting with one MCB as incommer complete as in repairs all as specified and directed

S & F MCB DB 12 way double door sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete as in repairs all as specified and directed

S & F MCB DB 8 way double door sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete as in repairs all as specified and directed

S & F MCB DB 4 way double door sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete as in repairs all as specified and directed

S&F MCB FP(Isolater) pole 63 amps 415 Volts B series complete as in repairs all as specified and directed

S&F MCB, single pole and neutral link (double pole) 240 volts 40 to 63 Amps capacity B seriesfixed in DB's.complete as in repairs all as specified and directed

S&F MCB, single pole 240 volts 6 to 32 Amps capacity B series fixed in DB's complete as in repairs all as specified and directed

S&F MCB, single pole 240 volts 40 to 63 Amps capacity B series fixed in DB'scomplete as in repairs all as specified and directed

M & L Sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC Conduit or in concealed conduit(as required & directed by Engr-in-Charge) accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and with 4 Sqmm earth wire, PVC insulated & unsheathed complete as in repairs all as specified and directed Note: (i) Two runs of 4sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted .

M&L Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No. 3 of SSR Part-I. Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia unto 7.5 from the earth plate electrode & refillling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete as in repairs all as specified and directed

M&L Galvanised iron wire 4 mm dia burried in ground or on wall complete all as directed.

M&L Galvanised tubing light grade 15 mm dia complete with all accessories burried under floor , or on wall all as directed for earth lead protection .

S&F Exhaust fan with louvers of size 300 mm sweep, 900 RPM 230 volts single phase AC supply complete with, bolt, nuts and washers, suitably embedded in the wall including making suitable opening and provisioning of flexible cord copper of size 23/0.0076 from ceiling rose to exhaust fan for giving connection complete all as specified and directed by Engineer-in-Charge Note :- Existing unserviceable exhaust fan shall be deposited to MES store yard Makarpura.

Excavation in trenches not exceeding 1.5 mtr in depth and not exc 1.5 mtr in width for foundation and getting out in soft/loose soil complete

Returning, filling in (soils) including spreading, leveling, watering and well ramming in layers of 25 cm thick after the cables etc. are laid, jointed and tested complete all as specified and directed by Engineer-in-Charge.

Removal of surplus excavated spoil (Soils) not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L Sand filling with clean dry find sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed by Engineer-in-Charge. Note ;- Punned thickness shall only be measured for payment.

Supply and lay burnt bricks sub calss B for cable protection laid across the length of cable all as specified and directed by Engineer-in-Charge.

Supply, laying, jointing, testing and commissioning 25 Sq mm 4 Core LT underground cables, 1100 volts grade, PVC insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-1554 Part-I marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete all as specified and directed.

Supply, laying, jointing, testing and commissioning 10 Sq mm 2 Core LT underground cables, 1100 volts grade, PVC insulated and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-1554 Part-I marked, laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe complete all as specified and directed.

S&F Steel tubular poles complete cast iron plate base plate, final plug, bolts, nuts and screws as specified type 410 SP-31 of length 09m including excavation and concreting, copping all around the pole as specified and to the satisfaction of EIC.

S&F Cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts & bolts , washers , welding bending cold or hot , drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

S&F PVC boxes of any description and in any position on poles or fixed in the plinth of poles and supplying and fixing in position in repair street light box of PVC make sintex consisting of 01 Nos MCB 10Amps, 10 Ka capacity and 4 Nos ebonite insulator ( 3 phase and neutral) including aluminium strip for incoming and outgoing cable with necessary connection, clamps,nuts,bolts,lugs, duly fixed on the pole with suitable size of aluminium clamp as approved and directed by Engineer-in-Charge..

S&F GI tubing 40mm bore light grade for protection of cable at wall/trench with fixing accessories as directed of following size. Note Unit rate include Cutting on Road or walls will be Plaster with pcc 1:2:4 and making good the Surface as required at site or all as directed by Engineer in Charge

S&F High efficency IP 66 integral flood light with pressure die cast aluminium housing and toughened glass in the front suitable of 60 Watt as in repairs all as specified

M&L Boring under roads/ hard cemented surface for insertion of 40 mm dia G I pipe for laying of cable all as specified.

Supply and installation, testing of water cooler steel body electric driven (single phase), having approx storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour Note :- Existing unserviceable water cooler fan shall be deposited to MES store yard Makarpura.

shree nathji trading corporation

SLB Enterprises

Chanda Construction Co.

SHISHODIA ENTERPRISES

AARTI ENTERPRISE