REPAIR TO FLOOR, PLINTH, PLASTER, ROOF SHEETING, EARTH FILLING, JOINERY ETC IN WSA IN TECH AREA AT AF STN HALWARA

Amount

Hacking out broken glass (any size shape, thickness, quality or description) from wooden/metal frame glazed with putty or fixed with beads having area not exc 0.50 sqm in each pane, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving’s n exc 15cm thickness below or above ground level and removing the same out side MoD land, complete all as specified and directed.

Dismantling floor hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises of MoD, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed.

Dismantling AC/ fibre glass translucent corrugated or semi corrugated sheet including ridges, hips, valley etc of any description and thickness in roof coverings, complete all as specified and directed.

Dismantling plain or corrugated steel sheets of any gauge, thickness in any position, complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of exterior acrylic emulsion paint in camouflage pattern, using minimum 3 different approved tint/ colour as approved by GE, complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of distemper oil emulsion, complete all as specified and directed.

M&L for preparation of old decorated plastered and unplastered surface of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, filling holes cracks with wall care putty and applying two coats of white wash, complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed 20 mm thick in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L for bircks works with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster or cement lime plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 finished even and fair without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of ceiling in cement mortar 1:3 finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior acrylic emulsion paint over a coat of primer in camoflage pattern, using minimum three different approved tint/ colour as approved by GE, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer over 1mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash, complete all as specified and directed.

All as per Sl item No 19 above but on ceiling surfaces.

Dismantling wrought iron work or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 (Gde E-165), complete all as specified and directed.

M&L for framed work of Fe-410W grade E-250 quality- B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per Sl item No 24.00 above but 8mm dia.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated or profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixing with self taping screws, complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Easing adjusting straighting of member and repairs /weldings, greesings etc to steel gates of area exc 3.00 Sqm but not exceeding 5.00 Sqm each leaf for noise less operation, complete all as specified and directed.

Welding in repairs of exc 2.5 cm but not exceeding 5cm in length and the thickness of metal to be welded exceeding 6 mm but not exceeding 9 mm patch work of defected angle ,Tee, channel ,flat iron section as in existing arrangement on traverse of blast pens for holding IR net including fixing, tighting of GI wire and making it fully serviceable for operation, complete all as specified and directed

S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed wih 2mm dia barbs at 75mm spacing and stranining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. (each line wire to be measured), complete all as specified and directed.

Restraining and securing including making good staples etc. Galvanised 2 strand, steel barbed wire 2.24mm dia barbed wih 2mm dia barbs at 75mm spacing and stranining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. (each line wire to be measured), complete all as specified and directed.

Demolition of reinforced cement concrete in any position not otherwise specially provided for, complete all as specified and directed.

Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L hardcore of broken bricks to gauge n exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (40 mm graded stone aggregate ) as in foundation, base filling and mass, complete all as specified and directed.

M&L for precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast post ,fencing posts, straining or terminal post , struct etc for fencing avg sectional area exc 100 sqcm but n exc 250 sqcm with or without chamfered angles and flat, splyed, rounded or mitred tops, complete all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed.

Removing excavated material exc1.5 km but not exceeding 5 KM and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

Forming embankments including raising (or lowering) earth,spreading in layers n exc. 30 cm thick; watering, ramming / rolling and finishing to required size, shape,etc upto 4.5m height or blast pan top, complete all as specified and directed.

M&L ANTI-TERMITE TREATMENT (post construction) Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L ANTI-TERMITE TREATMENT (post construction) along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

M&L for 75mm thick cement concrete type B- 2, 1:2:4 (40mm graded stone aggregate) as in sub base finished even and fair surface without using extra cement, complete all as specified and directed.

M&L sand filling under floors or in foundation, complete all as specified and directed.

M&L for 80mm thick Machine pressed precast concrete interlocking paver block (M-40 Grade) any shape and size confirming to IS 15658-2006 laid over sand cushioning, complete all as specified and directed. Note :- Sand cushioning shall be measured and paid seperately.

S&F in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F in repair 100mm mild steel CP grating fixed to weep holes of RCC wall complete with two or more rawl plug/screws, making good the adjacent surfaces in cement mortar 1:3, complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron of angle iron post / iron net supporting structure steel on blast pan any description over 10cm width or girth and applying one coat of synthetic enamel paint of any tint/ colour as approved by GE, complete all as specified and directed.

All as per Srl item no 48 above but on wood or wooden based surface.

M&L for preparation of new surfaces of steel and iron of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer of any tint / colour as approved by GE, complete all as specified and directed.

S & F in repair steel rolling shutters with ball bearing , guide channel as specified including top covers anchoring rod, hasp and staple and one shop coat of primer erect in position as indicated complete push or pull or manual type having thickness of laths 1.00 mm, complete all as specified and directed.

Repairing gear operated, manual operated, rolling shutter and iron door after welding, straighting, easing, adjusting, greasing and making good the disturbed surfaces, complete all as specified and directed.

Deol Builders (BID ID -3080451)

M/S Maa Dhari Builders (BID ID -3094728)

kartikconstructions (BID ID -3094075)

BEHL AND COMPANY (BID ID -3084838)