Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹16.1 L+₹2.0 L (13.9%)Rejected-Finance PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹18.3 L+₹4.2 L (29.5%)Rejected-Finance C 295 ADG P CHENNAI | CHENNAI | TAMIL NADU | 600001 | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹19.4 L+₹5.3 L (37.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹22.4 L+₹8.2 L (58.2%)Rejected-Finance DOOR NO XII 356 A OPP POST OFFICE RAMANTHALI POST DIST KANNUR KERALA 670 308 | RAMANTHALI | KANNUR | KERALA | 670308 | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹17.7 L
EMD Value
₹35,400
Closing Date
5 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2023_MES_607879_1
GE MAINT EZHIMALA 8597
Open Tender
Civil Works
Item Rate
120 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹35,400
Yes
10 Aug 2023
4 Jul 2023
7 Aug 2023
4 Jul 2023
5 Aug 2023
18 Jul 2023
5 Jul 2023 - 12 Jul 2023
Amount
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and directions of Engineer-in-Charge.
S&F anodised powder coated of any color aluminium door shutters, aluminium section weighing 0.55Kg/m incl necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.
S&F 4 levers brass mortice lock, vertical type, of size 100mm complete all as specified and as directed.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed.
S&F curtain rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed.
M&L for aluminium powder coated windows and ventilator shutters (louver type) etc. side hung type without sash bars, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.
S&F 5.5mm thick sheet glass ordinary quality & glazing in aluminium door/ window with neoprene rubber and frosted on one side in squares exc. 0.5 sqm in each pane complete all as specified and as directed.
Supply and fixing PVC wall lining consisting of 5mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame /aluminium door at site etc complete all as specified and as directed by Engineer-in- charge.
S&F for door closer aluminium (extruded section) hydraulically regulated designation No. 03, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kgs complete all as specified and as directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
M&L for providing and fixing stainless steel (Grade 304) railing/ grill/gates made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
M&L for preparation of new plaster surface and applying two coats of acrylic emulsion paint having VOC content less then 50 gms/ litres on wall over a coat of acrylic primer over putty as required complete all as specified and as per manufacturer's instructions.
M&L for preparation of old decorated surfaces and applying one coat of acrylic emulsion (interior grade) on wall complete all as specified and as per manufacturer's instructions and as directed.
S&F for prelaminated particle board 18/19 thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
S&F PVC magnet catcher fixed with screws to wooden frames complete all as specified and as directed.
M&L for PVC lipping edge tape fixed with nails/glue complete all as specified and as directed.
S&F stainless steel telescopic channel drawers slides (length n exc 600mm) complete all as specified and as directed.
S&F stainless steel closing hydraulic hinges for shutter complete all as specified and as directed.
S&F 75mm long hasp and staple, safety type, stainless steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F 75mm long handle of stainless steel fix with screws complete all as specified and as directed.
S&F for 75 mm size butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.
S&F harrison rails, mild steel, anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.
M&L for laterite stone partition walling of rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15cm thickness ( below or above gd level) complete all as specified and as directed.
M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded agg ) as in floors sub base complete all as specified and as directed.
M&L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles 350x250x7mm / 450x350x 7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting-dado and pillar laid, jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab over and including 15 mm thick backing coat in CM 1:4 complete all as specified and as directed.
S&F in PVC bathroom cabinet mirror size 350mm x 450mm complete all as specified & directed by Engineer-in- charge.
S&F stainless steel 06 peg cloth rail hook complete all as specified & directed by Engineer-in- charge.
M&L for cement concrete 1:2:4 type B1 (20mm graded stone aggregate) as in roof kerb, rounded or chamfered on edges complete all as specified and as directed.
M&L for colour code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through and including PVC conduit of suitable size not less than 20 mm dia medium grade surface on wall plastic box fitted with modular cover plate with frame (inner/ outer plate) for mounting 6 Amps switch with socket on independent board including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engr-in-charge for the following:- (a) 5 Amps socket point on independent board Notes:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engineer in charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral and earth conductor. (iii) The wiring shall be done strictly by following proper colour coding using red , blue, yellow for phase, black for neutral and green for earth leads. (iv) Size of copper earth wire must be equal to size of current carrying conductor upto size 16 sqmm.
M&L for sub main wiring using 2 runs of 2.5 sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit of suitable size not less than 20 mm dia medium grade surface on wall along with 1 run of 2.5 sqmm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified, including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engineer-in-Charge.
M&L for sub main wiring using 2 runs of 4 sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit of suitable size not less than 20 mm dia medium grade surface on wall along with 1 run of 4 sqmm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified, including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engineer-in-Charge. Notes for item No.36 & 37 :- (i) One run of PVC conduit alongwith 3 runs of respective size of PVC insulated copper conductor cable with necessary accessories will be measured as one unit. (ii) Strictly follow the proper colour code red/yellow/blue for phase,black for neutral and green for earth. (iii) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate.
M&L for sub main wiring using 4 runs of 10 sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit of suitable size not less than 32 mm dia medium grade surface on wall along with 1 run of 10 sqmm PVC insulatd copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified, including making good the existing disturbed surface using wall putty and matching colour emulsion paint complete all as specified and directed by Engineer-in-Charge. Notes :- (i) One run of PVC conduit alongwith 5 runs of PVC insulated copper conductor cable with necessary accessories will be measured as one unit. (ii) Strictly follow the proper colour code red/yellow/blue for phase,black for neutral and green for earth. (iii) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate.
S&F modular switch one way 6 Amps 1 module ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F modular socket 6 Amps 2 module multi pin ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F modular switch one way 16 Amps 1 module ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F modular socket 16 Amps 2 module ISI marked complete all as specified and directed by Engineer-in-Charge.
S&F modular white cover plate with frame 3 module complete all as specified and directed by Engr-in-charge.
S&F PVC rectangular block for mounting switches, sockets, with 3mm thick plastic laminated sheet cover complete all as specified and directed by Engr in charge.
S&F modular switch one way 20 Amps 1 module ISI marked complete all as specified and directed by Engineer-in-Charge.
Supply and fix MCB single pole AC 240 Volts, 25 Amps C-Series complete all as specified and directed by Engineer-in-Charge.
Supply and fix MCB triple pole & neutral, 63 Amps, 415 Volts AC C-Series complete all as specified and directed by Engineer-in-Charge.
Supply and fix modular AC Socket with MCB single pole 25/32 Amps C-Series, AC 240 Volts complete all as specified and directed by Engineer-in-Charge.
Supply and fix wall mounted fan AC single phase 230/240V of size 450 mm complete all as specified and directed by Engr in charge.
Supply and fix MCB DB TPN 200Amps rated bus bar 415V AC supply double door type, 4 way fixed to the existing wall complete all as specified and directed by Engineer-in-Charge.
Gates Infra Construction Co
EURO ENTERPRISES
PADMANABHAN. K.V
SATHEESAN.T.K
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .