Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.4 LAccepted-AOC | L1 | Accepted-AOC Lowest Accepted. | |
| 2 | L2₹24.6 L+₹1.9 L (8.26%)Rejected-AOC DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC Not Accepted | |
| 3 | L3₹25.3 L+₹2.6 L (11.6%)Rejected-AOC 54 AKASHDEEP COLONY CHAKRATA ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L3 | Rejected-AOC Not Accepted | |
| 4 | L4₹25.6 L+₹2.9 L (12.6%)Rejected-AOC | L4 | Rejected-AOC Not Accepted | |
| 5 | Rejected-Technical SHOP NO 1 KARGI CHOWK HARIDWAR BY PASS DEHRADUN UTTARAKHAND | - | Rejected-Technical Due to not uploaded required document i.e tender fee and EMD not received and affidavit for only one contract has been awarded to your firm by MES and work completed in MES as per format not submitted |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Hills Dehradun
HQ CWE(Hills) Mall Road Dehradun-248003
Welcome Maintenance to MD Accn and certain Misc BR work at Mily station Raiiwala
2023_MES_593665_1
86404/RWL
Open Tender
Civil Works
Item Rate
180 days
AGE(I) Raiwala
As per NIT
8 documents required · 8 mandatory
₹500
Yes
AGE(I) Raiwala
₹66,000
Yes
3 Aug 2023
8 May 2023
12 Jun 2023
8 May 2023
5 Jun 2023
23 May 2023
Amount
M&L for preparation of old decorated surface of exterior wall by complete removal of existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint of required shade (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint/ distemper by using roller/ spray machine complete all as specied and directed at site by Engineer-in-Charge. Note (i) The old/ New surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper. The cost of materials, labour and T&P required for preparation of surface are demand to be included in the rates quoted. (ii) The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii) All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv) after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v) Before commencing the work, contractor will got the written approval from GE/ AGE (I) for the make and colour / shade (tint). (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor.
M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over one coat of wall puttyusing roller all as specified and prescribed by manufacturer of paint Ist Quality and all as directed at site by Engr-in-Charge . Note:- (i) The old surface must be prepared with wall care putty in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)
Taking down cement plaster on brick , concrete or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed.
M&L for rendering 10 mm thick in CM 1:3 as in ceiling finished even and smooth (without using extra cement) all as specified and as directed.
M&L for white washing three coats on ceiling incl preparation of newly plastered surfaces.complete all as specified and directed by Engr In Charge.
M&L for 15mm thick rendering on fair faces of brick wall in CM (1:6) surface finished even and fair complete all as specified and directed.
M&L for preparation of newly plastered surface of interior wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacturer of paint/ distemper by using roller/ spray machine complete all as specied and directed at site by Engineer-in-Charge. Note:- (i) The old surface must be prepared with wall care putty in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)
M&L for 15mm thick plastering on fair faces of brick wall in two layers, Ist layer 10mm thick CM (1:6), and IInd layer 5mm thick CM (1:4), surface finished even and fair mixed with @ 200ml per bag WPC (liquid type) complete all as specified and directed. Note :- WPC (Liquid type) shall be measured and paid separately as supply only.
Supply only WPC integral water proofing compound (Liquid type) complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint/ distemper by using roller/ spray machine complete all as specied and directed at site by Engineer-in-Charge. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building. (v). The colour / shade will be all as approved by GE / AGE (I)
M/L for preparation of old surfaces of ceiling plastered including cornices and pillasters etc and applying one coat of white wash on ceiling all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted surface of wall and applying one coat of oil bound distember all as specified and directed.
M&L for preparation of old painted surfaces of ceiling and applying one coat of oil bound distember all as specified and directed.
M&Lfor preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality all as specified and directed .
Removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any wiidth or girth and preparation of previously untreated wood and wood based sufaces of any description not othrwise described over 10 cms width or girth and applying two coat of symthetic enamel paint (any tint) Ist quality over a one coat of pink primer complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality all as specified and directed .
Removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any wiidth or girth and preparation of previously untreated steel sufaces of any description not othrwise described over 10 cms width or girth and applying two coat of symthetic enamel paint (any tint) Ist quality over a one coat of red oxide complete all as specified and directed.
S & F In repair of 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. Complete all specified and directed
S&F in repair for PVC Connections 15mm size with PTMT nuts of length 450 mm all specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clips and providing and fixing new one. Complete all as specified and directed
S & F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sqm in each pane. Complete all as specified and directed
S&F for Continuous (piano) hinges, Stainless steel, bright finish or electrogalvanised ,Width of flap (when open), 40 mm . Complete all as specified and directed
S & F in repair stainless steel barrel tower bolt of 200 mm length of extruded section (ISI Marked). Complete all as specified and directed
S & F in repair stainless steel barrel tower bolt of 300 mm length of extruded section (ISI Marked). complete all as specified and directed
S & F in repair stainless steel sliding door bolt of 300mm long, with hasp, staple (bolt type) complete all as specified and directed.
S&F, in repair, stainless steel handles,fabricated type, anodised 200 mm long,(ISI Marked) all as specified and directed.
S&F in repairr Hasp and staple, size 100mm, safety type,aluminium anodised brass with mild steel hinge pin including bolt to hinge plate and fixed with screws (ISI Marked). Complete all as specified and directed
S & F in repair Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples, (ISI Marked). complete all as specified and directed
S&F in repairs Stainless steel iron magnetic curtain rod 26mm dia with fixing bracktes and decorative type knobs both side of each rod including taking down old curtain rod or palmet boxes..Complete all as specified and directed by Engg-In-Charge Note:Measurements will be taken between end point of knobs.
Refixing of shutters in same opening of any descrption after easing and adjusting , n exc 1 Sqm. Complete all as specified and directed by Engg-In-Charge
Refixing of shutters in same opening of any descrption after easing and adjusting size exc 1.00 Sqm but n exc 2.00 Sqm. Complete all as specified and directed by Engg-In-Charge
S & F in repairs 15mm bore Stop angle valves, cast copper alloy, fancy type chromium plated , screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed .
S & F in repairs Grating ,round 127 mm dia chromoum plated all as specified and directed
S & F in repairs 15 mm bore chromium plated bib taps long body, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed
S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed
S&F in repairs towel rail 600 mm long fixedwith and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) all as specified and directed
S&F in repairs towel ring chromium plated fixed to wall with chromium plated (CP) brass screws complete all as specified
S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union all as specified and directed
S & F in repair, Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long. all as specified and directed
S&F in repairs 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe. all as specified and directed
S & F in repair to Stainless steel kitchen plate rack of 0.80mm thick sheet of over all size 31" x 30" x 10" fixed with steel screws and steel rawal plugs all as specified and directed
S&F in repair corner shelf fancy type made of 6 to 7mm thick sheet glass of size 250mm x 250mm fixed with chromium plated brackets complate all specified and directed.
M & L in repair Stainless steel Jet spray with 1.5 mtr braided tube complete all as specified and directed
S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete
S & F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed
S&F galvanised iron sheet 1.2mm thick cut in circular shapes of size 450mm dia and bent to the shape of cover of PVC overhead tank with edges turned. Spikes made of 1.2mm thick GI sheet cut in triangular shape with sharp edge 50mmx25mm size bent and fixed to circular sheet with rivets at 100mm c/c spacing bothways. The sheet with spikes shall be fitted to overhead tank with 4 Nos self tightening screws complete all as specified and directed.
S&F in repairs Stainless steel peg set, 150 mm size complete all as specified and directed.
S & F in repairs of aluminium door seal upto 1200 mm long on bottom of door all as specified and directed
S&F in repair 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete including check nut and suitable nipple, screwed for iron pipes or brasas ferrule and fixed.Make : ISI mark
S&F in repair Wash basins (Padestal pattern) 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fitting all as specified and directed
S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe suitable for IWC of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity of approved make .Complete all as specified and directed
S&F repair 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kg f per Cm Cm Square fixed to walls, ceilings or in floors etc.
S & F in repairs Sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 and bowl size 410mm x 330 mm x 160mm. all as specified and directed
S & F in repair wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed.
S&F in repairs toilet paper holder chromium plated fixed to wall with chromium plated (CP) brass screws all as specified and directed
S&F in repairs Health Faucet with hose & hook (complete set) fixed to angle / stop cock 15 mm dia all as specified
S&F in repairs towel rack fixed with and including CP brass screws and wooden/plastic cleats,complete all as specified and directed.
TARUN ENGINEERING WORKS
M/S SURAT SINGH AND SONS
AKANSHA.ASSOCIATES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .