Rewiring of Udl House Suite Room Lilly

Rewiring of Udl House Suite Room Lilly

Supply of 6A Modular Switches as spares for The work specified in Schedule No 1 (Beand and type of switches should be exactly same as the switches used for the work specified in Schedule No-1)

Supply of 6A Modular Sockets as spares for The work specified in Schedule No 1 (Beand and type of sockets should be exactly same as the sockets used for the work specified in Schedule No-1)

Supply of Modular step type regulators as spares for The work specified in Schedule No 1 (Beand and type of Regulators should be exactly same as the Regulators used for the work specified in Schedule No-1)

Concealed pipe Point wiring with individual control For 16 A power sockets and 16 A DP switchs for ACs, using flexible copper cables 2.5 sqmm for control and neutral connection through pvc conduits not less than 20 mm using metal saddles with spacing not exceed 50 cm as per relevant drawings or instructions from FACT Engineer in Charge. The work shall include wiring along roof/beam/column/ceiling using clamps and drawing wires as required. Preparation and fixing of modular switch boards, switches, cover plates, dummy plates, Etc. Drawing of 1.5 sq mm earth wires of flexible copper wire of green color for body earthing of metal clad items, connecting, testing and commissioning. For a point wiring, pipe length greater than 10 metres shall be considered as one and a half point. All the materials for this work shall be in the scope of the contractor. If additional power sockets are required in same switch boards that shall be considered as half point. (Including the cementing and finishing of the wall after fixing of the Switch Box and Piping) APPROVED MAKE : WIRE : POLYCAB/ RR KABEL/ KEI/ FINOLEX OF FR TYPE SWITCH, SOCKETS, ETC : LEGRAND- MYRIUS/ HONEYWELL-HORIZON/SCHNEIDER-UNICA PURE/L&T-ENTICE PIPE SHALL BE OF MEDIUM ISI MARKED

Supply of 16A Modular Switches as spares for The work specified in Schedule No 5 (Beand and type of Switches should be exactly same as the sockets used for the work specified in Schedule No-5)

Supply of 16A Modular DP Switches as spares for The work specified in Schedule No 5 (Beand and type of Switches should be exactly same as the sockets used for the work specified in Schedule No-5)

Supply of Modular Sockets 16A as spares for The work specified in Schedule No 5 (Beand and type of sockets should be exactly same as the sockets used for the work specified in Schedule No-5)

Supply of Modular Switch dummy cover plates for The work specified in Schedule No 1 & 5 (Beand and type of switch dummy cover plate should be exactly same as used for the work specified in Schedule No-1 & 5)

Supply and Installation of Calling Bells with required clamps/fastners etc, All materials such as, Calling Bell of Reputed Make, clamps and fastners required for this work are in the scope of the contractor

Supply and installation of ceiling fans (1200 mm). Supply of all materials required for the work shall be under the scope of the contractor. The specifications of the ceiling fan is such that its service value shoould be higher than 5.5 CMM/Watts. (Refer BEE Guide Line For service value and Star Ratings). APPROVED MAKE :- LUKER/CROMPTON/ USHA/ ORIENT.

Supply and installation of wall fans (600 mm). Supply of all materials required for the work shall be under the scope of the contractor. The specifications of the wall fan is such that its service value shoould be higher than 5.5 CMM/Watts. (Refer BEE Guide Line For service value and Star Ratings). APPROVED MAKE :- LUKER/CROMPTON/ USHA/ ORIENT.

Supply and installation of 150mm dust proof (back side shutter) exhaust fans. Supply of all materials required for the work shall be under the scope of the contractor. 6" dai. holes are provided. APPROVED MAKE :- LUKER/CROMPTON/ USHA/ ORIENT.

Supply and installation of single phase 300 mm medium duty (Metal body) exhaust fans. Supply of all materials required for the work shall be under the scope of the contractor. 12" dai. holes are provided. APPROVED MAKE :- Almonard/CROMPTON/ USHA/ ORIENT.

Supply and installation of Angle Batten Holders For Rooms, Bathrooms, Stores and Work area. All materials required for the work including the Angle Batten shall be supplied by the contractor.

Supply and Installation of 2MD 3W LED Foot lamp with required metal box, cover plate, etc. All materials such as LED Fittings, metal box, cover plate, clamps and fastners required for this work are in the scope of the contractor. (Beand and type of Foot lamps should be exactly same as used for the work specified in Schedule No-1 & 5)

Supply of 2MD 3W LED foot lamp Fittings as spares for The work specified in Schedule No 16 (Brand and type of 2MD 3W LED foot lamps should be exactly same as the 2MD 3W LED foot lamp fittings used for the work specified in schedule No-16)

Supply and Installation of of 8W LED ceiling Light with required clamps/fastners, All materials such as LED Fittings, clamps and fastners required for this work are in the scope of the contractor. APPROVED MAKE :- LUKER/HAVELLS/PHILIPS/CROMPTON

Supply of 8W LED ceiling Light Fittings as spares for The work specified in Schedule No 18 (Brand and type of 8W LED ceiling Light should be exactly same as the 8W LED ceiling Light fittings used for the work specified in schedule No-18)

Supply and Installation of 12W LED Surface mount ceiling Light with required clamps/fastners, All materials such as LED Fittings, clamps and fastners required for this work are in the scope of the contractor. APPROVED MAKE :- LUKER/HAVELLS/PHILIPS/CROMPTON

Supply and Installation of 9W LED Fancy mirror Lamp with required clamps/fastners, All materials such as LED Fittings, clamps and fastners required for this work are in the scope of the contractor. APPROVED MAKE :- LUKER/HAVELLS/PHILIPS/CROMPTON

Supply and Installation of LED profile light with required profile channel, clamps/ fastners, All materials such as LED Strip (minimum 120/M), profile channel, suitable LED drive, Fittings, clamps and fastners required for this work are in the scope of the contractor, APPROVED MAKE :- LUKER/HAVELLS/PHILIPS/CROMPTON

Supply and Installation of LED strip light with required clamps/ fastners, All materials such as LED Strip (minimum 60/M), suitable LED drive, Fittings, clamps and fastners required for this work are in the scope of the contractor, APPROVED MAKE :- LUKER/HAVELLS/PHILIPS/CROMPTON

PEEJESS ELECTRICALS (BID ID -3200800)