Bathrooms and Toilets

Earth work excavation for foundations manual means and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building foundations

Earth work excavation for foundations manual means and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, , labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building Foundation (curtain walls/ narrow foundations)

Plain Cement Concrete (1:4:8) Proportion nominal mix (Cement:fine aggregate: coarse aggregate) for below flooring beds using 40mm size (SS5) hard granite metal up to Plinth Level from approved quarry including cost and conveyance of all materials like cement,sand,coarse aggregate, water etc, to site, and excluding seigniorage charges, sales& other taxes on all materials including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No.402) for:- Machine Mix-PCC (1:4:8) NOMINAL MIX.

Plain Cement Concrete (1:5:10) Proportion nominal mix (Cement:fine aggregate: coarse aggregate) for below flooring beds using 40mm size (SS5) hard granite metal up to Plinth Level from approved quarry including cost and conveyance of all materials like cement,sand,coarse aggregate, water etc, to site, and excluding seigniorage charges, sales & other taxes on all materials including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No.402) for:- Machine Mix-PCC (1:5:10) NOMINAL MIX for Levelling Course and Flooring Bed.

Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290X225X140mm, for manufacturing of flyash solid blocks using flyash of 80kgs, cement of 15kgs, Gypsum of 5kgs, and stone dust with a compresive strength not less than 50kg/sqm including cost and conveyance of all materials, labour charges, excluding seigniorage charges, scaffolding and curing etc., for foundation and basement.

Filling with useful available excavaed earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.(APSS.NO.309 & 310) for :- Refilling foundations.

Filling with carted gravel in trenches, sides of foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating Each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc. complete including cost and conveyance of gravel for finished item of work. (APSS No 309 & 310)

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Footings.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Columns.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Plinthbeam.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Roof Beams.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab 125mm thick.

Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290X200X140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls.

Plastering with CM (1:5) Prop:12mm thick in single coat including cost and conveyance of all materials like cement,sand,water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work (APSS 901,906)

Ceiling Plastering CM (1:3) Prop: 12mm thick in single coat sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Plastering with CM (1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement,sand,water etc., to site,excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work (APSS 901,906)

Providing impervious coat to exposed RCC roof slab surface with CM (1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, excluding seigniorage charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Flooring with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8) 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, excluding seigniorage charges, etc., complete for finished item of work.

Dadooing to walls with Decorated white back ground glazed tiles 200mmX152mm 1st quality of any bramd as approved by Engineer-in-charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3Kgs/sqmt. And jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement,sand, water, tiles, etc to site, excluding seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work. All Floors.

Supply and fixing of Zinc Pipe Door size 0.75X1.83Mts using outer frame Horizontal, Vertical and Center Supports of 25X25X3MM Square pipe and fixing zink sheet 4mm thick including fabrication and fixing cost and conveyance of all materials and labour chargers etc., complete of size 0.75X1.83Mts

Supply and fixing of Zinc Pipe Safety Grill of Outer frame 25X25X3 MM Zink Pipe and center supports 25X25X3 MM of 100MM C/C including cost and conveyance all materials and fabrication charges, fixing charges etc.,complete.

White washing two coats with White Cement or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls

Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)

Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls. (APSS No. 911)

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per Is 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20Swg, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work,including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wasage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work (APSS No.126)

Supply and fixing of 25mm dia 1.80mm thick PVC Pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in wall with all required accessories including masonry work for light,fan and separate plug point with hot dip galvanised metal box including all labour charges etc., complete.

Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS/HFFR P.V.C.insulated ISI Copper Cable Finolex / RR kabel / Fortune Art EBXL make in the existing metallic/non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings (SSR-2011-12, item No. 2.1.1)

Supply and run of 2 of 2.5 Sqmm PVC insulated flexible copper cable of Havells make in existing PVC conduit pipe circuits, MV Lamp/Security light points including laboiur charges (Phase, Neutral and earth) and run of 1 of 1.0 sqmm copper cable for earthing

Supply and fixing of Ashirvad/ Ajay/ Asral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM -D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold Water (IS 15778:2007) 28.60mm OD Pipe - SDR 13.5 (BMW-I.222)

Supplying & Fixing Orissa Pan 580MMX440MM white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI mark 580MMX440MM as approved by the Engineer-in-charge fixed in brick masonry with necessary ‘S’ trap of water closet, shall be encased in C.C.(1:2:4) 6" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors.

Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm ( 1'-6" x 1'-6") C.I. frame and cover of 20Kg. including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work.