Providing consultancy services for preparation of DPR Under least cost selection - LCS for construction of peripheralring road Mysore city in Mysore District - PRR

Carrying of detailed topographic survey by using total station along the existing or new road including taking L section and cross section at every 30 meter ROW, taking at least 10 spot levels per cross section, picking up all existing details inside the Row like electric telephone line, encroachmen ts,structures etc.remaining specification to be read in document attached

Reconnaisance survey including study of sheets, maps etc. for alignment including 3 dimension of apexes, fixing pegs, chain and compass or cross staff survey with L-Section and cross section of alignment at every 30 m or at every change of deviation whichever is less including fly levels at closing of day, fixing apex and B.M. stones of size 0.20x0.20x0.75 m in M20 C.C. at every 200 m and preparation of alignment plans and all type of compliance if required from department.

Preparation of Land Acquisition proposal including collection of 7 days12 and 8 A documents marking alignment on village maps, area calculation, preparation of proposal, printing, bindind, etc. complete and submission of 5 sets more ever liasoning and coordination with revenue authorities with compliance if any until finalisation of award including Joint measurement of the alignment. For existing alignment.

Scanning, digitisation & Geo-referencing of Cadastral or revenus maps and interpretation of all existing features like building, water bodies, rVIers, agricultural fields etc to generate map. Creation of G or S plat form by using Ortho redified images nd revenu date by linking of textual date.

Carrying of detailed topographic land plan survey by using DGCA Type Certified drone, fitted with advanced LiDAR with inbuilt IMU RGB and precision GNSS Technology with RTK Technology and real time fleet tracking technology in webapp along the existing or new roads for conducting ROW Survey

Conveying the boring machine and engine and all its accessories etc. to the site of the work and back including loading unloading etc. complete. (Note Distance to be measured from the station of boring machine engine etc. of district head quarters to site of the work by short route).

Providing detailed geological reports of proposed site by maintaining geotechnical investigation of structure stratification collecting soil, rock and ground water samples for laboratory tests to arrVIe the foundation design parameters. Rock properties such as type of rock, jointing fractures, etc. complete with suggestion about the site foundation and remedies.(Report)

Deploying Automated Traffic Count (ATCC) and classification system on Road (Two Lane) in both direction at designated traffic count post by using High Definition Cameras.remaining specification to be readin document attached

Survey of major bridge including taking L section of existing road two defined cross-sections (one at Upstream and one at Downstream) and one vergin cross section on alternate proposed cross sections and bed slope of stream upto sufficient long distance as required with chain and compass.remaining specification to be readin document attached...unit- Rmtr

Survey of Minor bridge including taking L section of existing road and two defined cross sections, one of U/s and one of D/s, one vergin cross section on alternate proposed cross sections and bed slope of stream upto sufficient long distance as required with chain and compass. remaining specification to be readin document attached

Survey of C.D. works including taking L section of Road, catchment area plan by Traverse method and taking trial pits of size 1.00x1.00x1.50 m including preparation of detailed Plans and Estimates in 5 copies and all types of compliance if required from the Department.

Cutting down branches of trees, bushes etc. stacking the material neatly as directed (For Motarable Road)

Geometrical design of road horizontal and vertical curves for design speed specified by IRC including carrying out trail for optimising of cVIil cost minimising land acquisition and maximum use of existing facility and preparation of widening arrangement drawing for insisting structures stake out date for horizontal alignment and working levels including super elevation effect etc. complete.

Preparaion of initial design of flyovers with preparing General Arrangement drawing with dimensions etc. complete and preparation of rough estimate for all components of bridge. Including supplying four copies of coloured drawings and copy of drawing on C.D. (excluding geotechnical and structural design part.)...unit- Rmtr

Taking the trial pit for roads, alignment, C.D. Works in Hard murum, and Boulders including stacking the excavated material including all lifts and necessary back filling upto depth 3.0 m

Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia in rocks as specified below including all necessary materials such as oil, grease, steel boostan and such other materials as required (including conveying the material to site of work) and Preserving the core sample serially on site of work and conveying the same to HQ of concernring office as directed. Quartzite with diamond drill with Nx Bit 0 to 50 m.....unit - Rmtr

Preparation of detailed Plans and Estimates of road including typing in 5 copies, ammonia prints, with colouring of plans, proper filing, indexing and paging etc. complete and all types of compliance, if required from Department.

Demarcation of Road boundry (ROW) including fixing the boundry stones of standard size and shape including fixing in block of standard size of C.C. of M10 white washing at 30 M interval on both sides

Falling weight deflectometer (FWD) Equipment with SUV - Test and Pavement Evaluation

Demarcation of right of way (ROW) as per design using total station including calculation of co-ordinates of 30 Meter interval on both sides of the road.

Preparation of roadway, drawing (Plan And Profile) on computer by using Autocad of required scale showing all topo feature and proposed construction details such as carriage way, median service road, toe line, retaining walls, cross drainage works, major structures, etc. complete. Including indexing, level tables, legend, basic information of project and design details etc.

Preparation of Engineering drawing as strip plan, widening scheme, index / key map, typical cross section, retaining walls, road furniture, general arrangement drawings for bus bays / truck lay-bays / rest areas / toll plaza / booths / and type drawing of pipe/ slab drains etc. on computer using Auto CAD.

Preparation of draft / Final Report comprising of technical, financial economic feasibility and environmental aspects of the project including executVIe summary and remaining specification to be readin document attached

Network Survey Vehicle (NSV) With SUV - per Km