Repairing work of Unsold flats of Residential complex at NBCC Town, Phase-I, Khekra, Baghpat Uttar Pradesh

Name of work:-Repairing work of Unsold Flats of Residential Building at NBCC Town, Khekra, Phase-I, Baghpat, Uttar Pradesh.

BOQ / SCHEDULE OF QUANTITIES

Item No. DSR/ DSR/NS RATE

Sr. No. DESCRIPTION OF ITEMS UNIT QTY AMOUNT (RS.)

DSR 2023 CIVIL ITEMS

6.0 HALF BRICK WORK

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of

6.13 class designation 7.5 in superstructure above plinth level up to floor V

1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 252 1123.80 283197.60

Extra for half brick masonry in superstructure, above floor V level for

every four floors or part thereof by mechanical means

Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at

every third course of half brick masonry

8.0 MARBLE WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing,

curing. moulding and polishing of edges to give high gloss finish etc,

complete at all levels

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black

Providing edge moulding to 18 mm thick marble stone counters, Vanities

8.3 etc., including machine polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-Charge

Extra for fixing marble /granite stone, over and above corresponding

6 8.4 basic item, in facia and drops of width upto 150 mm with epoxy resin Metre 50 568.55 28427.50

based adhesive, including cleaning etc. complete

9.0 WOOD AND PVC WORK

Providing and fixing ISI marked flush door shutters conforming to IS: 2202

(Part I) decorative type, core of block board construction with frame of

1st class hard wood and well matched teak 3 ply veneering with vertical

grains or cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Providing and fixing ISI marked flush door shutters conforming to IS: 2202

(Part I) non-decorative type, core of block board construction with

9.21 frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both

faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

30 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Providing and fixing aluminium sliding door bolts, ISI marked anodised

9.96 (anodic coating not less than grade AC 10 as per IS: 1868), transparent

or dyed to required colour or shade, with nuts and screws etc. complete

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

9.97 coating not less than grade AC 10 as per IS: 1868) transparent or dyed to

required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium pull bolt lock, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS: 1868) transparent or

dyed to required colour and shade, with necessary screws bolts, nut and

washers etc. complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic

9.100 coating not less than grade AC 10 as per IS: 1868) transparent or dyed to

required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour and shade, with necessary

screws etc. complete

15 9.101.1 Single Rubber Stopper Each 729 39.60 28868.40

10.0 STEEL WORK

Providing and fixing T-iron frames for doors, windows and ventilators of

mild steel Tee-sections, joints mitred and welded, including fixing of

necessary butt hinges and screws and applying a priming coat of

approved steel primer

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete

16 10.13.1 block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand 6 graded Kg 1424 141.70 201780.80

stone aggregate 20 mm nominal size)

Steel work welded in built up sections/ framed work, including cutting,

10.25 hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Providing and fixing hand rail of approved size by welding etc. to steel

10.26 ladder railing, balcony railing, staircase railing and similar works,

including applying priming coat of approved steel primer

Providing and fixing 1st quality ceramic glazed floor tiles conforming te IS

15622 (thickness to be specified by the manufacturer) of approved

make in all colours, shades except burgundy, bottle green, black of any

size as approved by Engineer-in-Charge in skirting, risers of steps and

dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of

matching shade complete

Providing and laying vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08%

and conforming to IS: 15622, of approved make, in all colours and

shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting

the joints with white cement and matching pigments etc., complete

Painting top of roofs with bitumen of approved quality @ 17kg per 10

sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm,

including cleaning the slab surface with brushes and finally with a piece

of cloth lightly soaked in kerosene oil complete

21 12.15.1 With residual type petroleum bitumen of grade VG-10 Sqm 252 166.20 41882.40

10 cm thick (average) mud phaska of damped brick earth on roofs laid

to slope consolidated and plastered with 25 mm thick mud mortar

mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix

1:1 (1 clay: 1 cow dung) and covered with flat tile bricks, grouted with

cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral

water proofing compound by weight of cement and finished neat

With common burnt clay F.P.S.(non modular) brick tile of class

23 12.18 Extra for every additional 1 cm thickness of mud phaska Sqm 126 24.20 3049.20

13.0 FINISHING

13.1 12 mm cement plaster of mix

13.2 15 mm cement plaster on the rough side of single or half brick wall of mix

13.16 6 mm cement plaster of mix

Providing and applying plaster of paris putty of 2 mm thickness over

plastered surface to prepare the surface even and smooth complete

13.37 White washing with lime to give an even shade

28 13.37.1 New work (three or more coats) Sqm 7565 39.05 295413.25

13.50 Applying priming coat

With ready mixed aluminium primer of approved brand and

manufacture on resinous wood and plywood

With ready mixed red oxide zinc chromate primer of approved brand

and manufacture on steel galvanised iron/ steel works

13.87 White washing with lime to give an even shade

31 13.87.1 Old work (one or more coats) Sqm 24684.15 22.85 564032.83

Removing white or colour wash by scrapping and sand papering and

32 13.88 preparing the surface smooth including necessary repairs to scratches Sqm 24684.15 19.75 487511.96

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade

33 13.99.1 One or more coats on old work Sqm 2492 102.80 256177.60

13.103 French spirit polishing

34 13.103.1 One or more coats on old work Sqm 236 224.80 53052.80

14.0 REPAIRING OF PLASTER

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5

sq.meters and under, including cutting the patch in proper shape,

14.1 raking out joints and preparing and plastering the surface of the walls

complete, including disposal of rubbish to the dumping ground, all

complete as per direction of Engineer-in-Charge

35 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) Sqm 4450 547.40 2435930.00

Brick work with common burnt clay bricks of class designation 7.5 in mud

15.0 DISMANTLING AND DEMOLISHING

Dismantling old plaster or skirting raking out joints and cleaning the

37 15.56 surface for plaster including disposal of rubbish to the dumping ground Sqm 4450 54.65 243192.50

within 50 metres lead

17.0 SANITARY INSTALLATIONS

Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device

(handle lever) conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors

wherever required

White Vitreous china Orissa pattern W.C. pan of size 580x440

mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet

(European type W.C. pan) with seat and lid, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually controlled

device (handle lever), conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors

wherever required

39 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid Each 37 6383.25 234903.60

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever

White Vitreous China Flat back wash basin size 550x 400 mm

with single 15 mm C.P. brass pillar tap

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per

IS:13983 with C.I. brackets and stainless steel plug 40 mm, including

painting of fittings and brackets, cutting and making good the walls

wherever required

17.10.2 Kitchen sink without drain board

Providing and fixing P.V.C. waste pipe for sink or wash basin including

P.V.C. waste fittings complete

17.28.2 Flexible pipe

43 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap Each 24 53.25 1278.00

18.0 WATER SUPPLY

18.21 Providing and fixing uplasticised PVC connection pipe with brass unions

18.21.2 45 cm length

18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet

Providing and placing on terrace (at all floor levels) polyethylene water

storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighing not less than 810 gms

Providing and fixing C.P. brass stop cock (concealed) of standard

design and of approved make conforming to IS:8931

Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931

21.0 GLAZING IN ALUMINIUM WORK

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

21.3 complete as per the architectural drawings and the directions of

engineer-in-charge (Cost of aluminium snap beading shall be paid in

With float glass panes of 5.0 mm thickness (weight not less

than 12.50 kg/sqm)

GST Factor ELECTRICAL ITEMS

Wiring for circuit/ submain wiring alongwith earth wire with the following

1.14 sizes of FRLS PVC insulated copper conductor, single core cable in

surface/ recessed medium class PVC conduit as required.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable and

1.15 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as

earth wire in existing surface/ recessed steel/PVC conduit including

dismantling as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated

1.18 annealed copper conductor, unarmored telephone cable in the

existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid

copper conductor PE insulated, shielded with fine tinned copper braid

and protected with PVC sheath in the existing surface/ recessed steel/

PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit

1.21 along with accessories in surface/recess including cutting the wall and

making good the same in case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on

1.22 surface or in recess with suitable size of phenolic laminated sheet cover

in front including painting etc. as required.

Supplying and fixing following piano type switch/ socket on the existing

switch box/ cover including connections etc. as required

67 1.23.5 6 pin 15/16 A socket outlet Each 22 145.67 3263.06

68 1.23.6 Telephone socket outlet Each 10 115.90 1205.36

69 1.23.7 TV antenna socket outlet Each 10 101.01 1050.54

Supplying and fixing following modular switch/ socket on the existing

1.24 modular plate & switch box including connections but excluding

modular plate etc. as required

75 1.24.6 Telephone socket outlet Each 46 157.37 7270.42

76 1.24.7 TV antenna socket outlet Each 46 157.37 7270.42

Supplying and fixing modular blanking plate on the existing modular

plate & switch box excluding modular plate as required.

Supply and fixing following size/ modules, GI Box alongwith modular

base and cover plate for modular switches in recess etc. as required

Supplying and fixing following way, single pole and neutral, sheet steel,

MCB distribution board, 240 V, on surface/ recess, complete with tinned

2.3 copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in

the existing MCB DB complete with connections, testing and

commissioning etc. as required.

87 2.10.2 Single pole and neutral Each 45 636.92 28661.25

Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required.

Supplying and fixing following rating, double pole, (single phase and

neutral), 240 V, residual current circuit breaker (RCCB), having a

sensitivity current 30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as required

GRAND TOTAL (INCLUDING 18% GST) 16708536

GRAND TOTAL (INCLUDING 18% GST) 16708536