WBMAD/ULB/HM/APAS- 11(2025-26)

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (i) 100mm diameter m 96.00 - (ii) 125mm diameter m 145.00 - (iii) 150mm diameter m 217.00 - (iv) 175mm diameter m 267.00 - (v) 200mm diameter m 305.00 - (vi) 225mm diameter m 460.00 - item No. 18.18(i), Page No. 334 For Runner including Lap, Tie Bar & Tie Post 100 dia

Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles item No. 18.17(i), Page No. 334 (i) 100mm diameter

Coal tarring on wooden surfaces including cost of materials a) Double coat Item 18.27(a), Page No. 335

Supplying empty Cement bags in good condition. Item 18.28, Page No. 336

Filling empty cement bags with dry earth or sand, stitching the bag( cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags Item 18.28, Page No. 336

Labour for fitting and fixing10 cm to 13 cm diameter SaL-Ballah/Euc-ballah as ties and runners including necessary nails bolts and nuts Item 18.41, Page No. 338

A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) PWD Building Works schedule, Page - 2, Item -4.(B) CORRIGENDA - 5

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground Floor including roof Page No. 10 Item No. 1a)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes P.No- 43 , I-38

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation PWD Building Works schedule, Page -42, Item- 36.f

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. P.No- 43 , I-38

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1: 6cement mortar (a) 15 mm thick plaster Page No.189,Item No.-1(ii)(b)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc NOTE:Cement 0.152 cu.m per100 sq.m. Page .No-192 , Item No-15

Applying exterior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Decorative Textured (Martt Finish) or Smooth Finish Acrylic exterior emulsion paint including scraping and prepairing the surface thoroughly , complete as per manufacturer's specification and as per direction of the EIC in Ground Floor (b) two coats. PWD Building Works schedule, Page -196 , Item no- 8(b)

Protective and Decorative Acrylic Exterior emulsion paint of approved quality, as per manufacturer's specification and as per dirction of EIC to be applied overf Acrylic primer as required. The rate includes cost of materials, labour, scaffolding and all incedental charges but excluding the cost of primer in ground floor (two coats)(a) normal acrylic emulsion. PWD Building Works schedule, Page -197 , Item no- 17

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. PWD Building Works schedule, P/200 Item-1(a)

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : (iv) Two coats (with any shade except white) PWD Building Works schedule, P-200 Item-2(b)(iv)

Add GST @ 18%

Add Cess 1%