Deposit work of Thiruvananthapuram Corporation Project No.S0002-24 Pipe Line Extension to Various Places in Njandoorkonam ward under Thiruvananthapuram Corporation

Amount

Working charges

15.59:Dismantling of flexible pavement ( bituminous courses ) by mechanical means and disposal of dismantled material up to a lead of 1 kilo metre, as per direction of Engineer-in-charge.

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

15.9.2:Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.9.2:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 25 mm nominal outside diameter pipes.

100.9.6:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 63 mm nominal outside diameter pipes.

100.98.1008:Engaging Coolie.

100.98.1009:Engaging Fitter ( grade 1).

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

OD200160/2022-2023:Taking connection from the existing main (Single boring), supplying and fitting suitable size saddle piece, boring the main, supplying and fitting 25mm brass ferrule 1no, 25mm GM full way wheel valve 1no, including all specials and connecting the newly laid main, testing the joints etc.complete but excluding cost of pipe Add Specification Below

Construction of Valve chamber

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars

13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

OD163541/2022-2023:Conveying CI MH cover with frame from the deptl store to site and placing in position etc complete

OD163543/2022-2023:Providing and fixing in position industrial type pressure gauges with gun metal/brass valves in pipe lines

OD163546/2022-2023:Supplying 560mm dia MH cover with frame

18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

Cost of Materials

OD196587/2022-2023:Supply of 25mm ASTM Pipe

100.98.231:Supply of PVC Pipe, 10kg/cm2, 32mm Dia.

100.98.234:Supply of PVC Pipe, 10kg/cm2, 63mm Dia.

OD198486/2022-2023:Supplying 63mm PVC Bend

OD198487/2022-2023:Supplying of 63mm dia. 6Kg Elbow

OD198488/2022-2023:Supplying 63mm PVC end cap

OD171042/2022-2023:25mm ASTM Elbow

OD171046/2022-2023:63x25mm PVC Reducer

S SANIL KUMAR

SUNEESH K

Bidder Name

S SANIL KUMAR

SUNEESH K

PANANVILA LABOUR CONTRACT CO OPERATIVE SOCIETY LTD NO T 2002