SITC of Lifts work at proposed 100 Bedded Mental Hospital at Gethia Distt. Nainital(2nd Call).

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: DGM HQ BRIDCUL

Name of Work: SITC of LIFT/ELEVATOR WORK AT PROPOSED 100 BEDDED MENTAL HOSPITAL AT GETHIA, DISTT NAINITAL

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder witth GST & All Taxes Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With GST & All Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Supplying, installation, testing & commissioning of 13 Passenger (884 KG) MRL lift having contract speed of 1 MPS in the existing lift shaft as per detailed specifications enclosed and as under (i) Speed : 1 MPS (ii) Floors : 5 (G+4) (iii) Travel : 12.6 mtrs (approx.) (iv) Stops & opening : 5 / 5 (v) Controller: A.C. variable voltage & variable frequency (vi) Operation : Microprocessor based simplex selective collective with / without atten­dant (vii) Power - 415 V, 3 phase, 50 Hz, 4 wires system (viii) Type of doors (a) Car Doors: AutomaticPower operated, center opening horizontal sliding stainless steel frame with Toughened Glass doors (b) Landing Doors: AutomaticPower operated, center opening hori­zontal sliding stainless steel frame with Toughened Glass doors. (ix) Car body will be of scratch proof SS finish. (x) Emergency light in the lift car. (xi) Full height Infra Red protection is to be provided for landing/ car doors. (xii) Provision of Toe guards, Fireman's switch etc. Automatic rescue device complete with with Battery of adequate capacity so as to operate ARD atleast seven time a day provided the duration between usege is atleast 30 Minutes. A Stainless steel hand rail not less than 600 mm long at 900 mm above floor level to be fixed on both the side panels and rear panel in the lift car. Button in car operating panel & landing operating panel shall be having Braille Inscription & shall be fixed for the handicaped. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. Flooring:-chequered aluminium sheet. Lift installation shall include all safety & control features as specified in the specifications. The features required for use of the lift by handicapped persons eg hand rail, braile signage closing speed of doors etc 1 2 Each Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

2 Supplying, installation, testing & commissioning of 13 Passenger (884 KG) MRL lift having contract speed of 1 MPS in the existing lift shaft as per detailed specifications enclosed and as under (i) Speed : 1 MPS (ii) Floors : 4 (G+3) (iii) Travel : 12.6 mtrs (approx.) (iv) Stops & opening : 4 / 4 (v) Controller: A.C. variable voltage & variable frequency (vi) Operation : Microprocessor based simplex selective collective with / without atten­dant (vii) Power - 415 V, 3 phase, 50 Hz, 4 wires system (viii) Type of doors (a) Car Doors: AutomaticPower operated, center opening horizontal sliding stainless steel frame with Toughened Glass doors (b) Landing Doors: AutomaticPower operated, center opening hori­zontal sliding stainless steel frame with Toughened Glass doors. (ix) Car body will be of scratch proof SS finish. (x) Emergency light in the lift car. (xi) Full height Infra Red protection is to be provided for landing/ car doors. (xii) Provision of Toe guards, Fireman's switch etc. Automatic rescue device complete with with Battery of adequate capacity so as to operate ARD atleast seven time a day provided the duration between usege is atleast 30 Minutes. A Stainless steel hand rail not less than 600 mm long at 900 mm above floor level to be fixed on both the side panels and rear panel in the lift car. Button in car operating panel & landing operating panel shall be having Braille Inscription & shall be fixed for the handicaped. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. Flooring:-chequered aluminium sheet. Lift installation shall include all safety & control features as specified in the specifications. The features required for use of the lift by handicapped persons eg hand rail, braile signage closing speed of doors etc 2 1 Each Excess(+) Full Conversion INR

3 Supplying, installation, testing & commissioning of 13 Passenger (884 KG) MRL lift having contract speed of 1 MPS in the existing lift shaft as per detailed specifications enclosed and as under (i) Speed : 1 MPS , (ii) Floors : 3 (G+2) (iii) Travel : 4.2 mtrs (approx.) (iv) Stops & opening : 3 / 3 (v) Controller: A.C. variable voltage & variable frequency (vi) Operation : Microprocessor based simplex selective collective with / without atten­dant (vii) Power - 415 V, 3 phase, 50 Hz, 4 wires system (viii) Type of doors (a) Car Doors: AutomaticPower operated, center opening horizontal sliding stainless steel frame with Toughened Glass doors (b) Landing Doors: AutomaticPower operated, center opening hori­zontal sliding stainless steel frame with Toughened Glass doors. (ix) Car body will be of scratch proof SS finish. (x) Emergency light in the lift car. (xi) Full height Infra Red protection is to be provided for landing/ car doors. (xii) Provision of Toe guards, Fireman's switch etc. Automatic rescue device complete with with Battery of adequate capacity so as to operate ARD atleast seven time a day provided the duration between usege is atleast 30 Minutes. A Stainless steel hand rail not less than 600 mm long at 900 mm above floor level to be fixed on both the side panels and rear panel in the lift car. Button in car operating panel & landing operating panel shall be having Braille Inscription & shall be fixed for the handicaped. Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator. Flooring:-chequered aluminium sheet. Lift installation shall include all safety & control features as specified in the specifications. The features required for use of the lift by handicapped persons e.g. hand rail, braile signage closing speed of doors etc 3 1 Each Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words