Const. of One Way Ramp from ROB on Delhi - Ambala Railway Line Crossing Kurukshetra - Pehowa Road in Distt. Kurukshetra (Pdg. Lighting Work Only).

Amount

Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. HSR No. 31.12 c (i)

(L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No. 31.17a) (ii)

TP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No. 31.17(a) (ii)

(P) Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 40 mm dia on flushed. HSR No. 31.21 (xii)

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR No. 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR No. 31.22(ii)

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. HSR No. 31.22(iii)

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. HSR No. 31.22(v)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required. HSR No. 31.22(xi)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required. HSR No. 31.22(xii)

(S) Under Ground Cables. Supply and erection of underground cable, loose in existing pipe or trenches complete with necessary connections. 10 Sq. mm 4 Core Cable. HSR No. 31.26 (xxxix) Ard.

16 Sq. mm 4 Core Cable. HSR No. 31.26 (xI) Ard.

25 Sq. mm 4 Core Cable. HSR No. 31.26 (xIi) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core. HSR No. 31.28 (ii)

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR No. 31.28 (iii)

(v) Pedestal. Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 750 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 900 mm x 600 mm x 250 mm below ground level. HSR No. 31.33 (i)

Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 4-way, TP & N (Vertical) (8+12) HSR No. 31.41 (ix)

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HDPE Pipe 63/50 outer dia / inner dia. HSR No. 31.67 (i)

Supply, installation, testing and Commissioning of 16 Mtr. Long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 part-3 suitable for 9/12Nos. Lumnaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufactured with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bollts , installation at site complete in all respect upto entire satisfaction of engineer-in-charge. THICKNESS of Top Section =3mm (minimum) Bottom Section =4mm (minimum) Top Dia =150mm Bottom Dia =140mm Thickness of Galavnization= Top=65micron(min) Bottom=85micron (min) Steel Reinforcement ( Civil HSR ) 31.83(ii)

Fe-500 E.Q.R. TMT Steel bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete. 18.22

DSR ITEMS Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc including form work etc as required. 14.09

Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement). 14.1

Supply and erection of decorative Pole 8Mtr. (8000mm) Cast Aluminium / Cast Iron pole Q4 & Q6 embellishment (CAT NO. LUXMAX-STEEL-140-Q4 EMBELISHMENT ) Made of mild steel & galvanized pole complete with service window containing 6 Amp. MCB, 4 Connecter, Pole is with casted embellishments at middle & bottom 2000mm base is 195x4.8 mm & Top 6000 mm dia is 114x4mm, Make :TWINKLE LUXMAX as per attached drawing and accessories required to complete the job in all respect including erection, fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. (Make as per approved list ). NS - 1

Supply & Erection of Decorative Ornamental Single Arm Bracket (CAT NO. LUXMAX-BKT-3133-900) Make :TWINKLE LUXMAX made out of steel with cast alum. Embellishment and suitable for mounting of drop down single fixture. The bracket are primer coated and painted with polyurethane paint. Overhang of the bracket is 900 mm. and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Make as per approved list ). NS - 2

Supply & Erection of Decorative 120Watt LED Street light (CAT NO. LUXMAX-PT-169L, Make :TWINKLE LUXMAX, Hanging street light make of cast aluminum housing with power LED are mounted directly on extruded aluminium heat singks. A UV stabilized PC / PMMA diffuser is comfort 3000k / 6000k allongwith allied accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Make as per approved list). NS - 3

Supply and erection of LED Flood light 240 watt of Makes Bajaj ( White ) (Model No.BJFL 240W LED ) High Wattage Floodlight 3rd generation LED luminaire with ultra sleek, light weight and with secondary optics, made of pressure die cast housings with IP 66 rating with all allied accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work ( Phillps & Crompton, Surya ). NS - 4

Supply and erection of 2.5 Sqmm, 3 core PVC insulated copper cable, ISI marked in existing pipe complete with necessary connection. (make Polycab). NS- 5

Supply & erection of enclosure for MCCB upto 63 Amp. (Optipro Enclosure for Frame - 3 Optimum 3 Pole MCCB) (Indo asian make) (811988) Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. (Similar make of L&T, Havells & Standard). NS- 6

Cost of cutting of metal road & repairing, filling etc. including all labour charges with petty materials complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. NS- 7

Supply and erection of 32 Amp. 3 Pole/230V Astronomical automatic time switch of Hevells / Indo Asian / LNT make Cat No. TL032ASO alongwith contactor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. NS- 8

N.K.Enterprises

M R CONSTRUCTION COMPANY