CONSTRUCTION OF C.H.C. BUILDING AT F.P. NO. 189, T.P.S.NO. 11 (BAPUNAGAR) IN SARASPUR- RAKHIYAL WARD, NORTH ZONE, AHMEDABAD

Name of Work:- CONSTRUCTION OF C.H.C. BUILDING AT F.P. NO. 189, T.P.S.NO. 11 (BAPUNAGAR) IN

SARASPUR- RAKHIYAL WARD, NORTH ZONE, AHMEDABAD

Bill of Quantities

I. No. Qty Items Unit Rate Per Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra

Breacker including stacking of servicable

materials and disposal of unservicable

materials with all lead and lift.Removal Of

Existing Building Foundation and Super

Structure If Any.

Demolition of Brick work and stone

masonry including stacking of serviceable

materials and disposal of unserviceable

b 115 materials with all lead and lift.(ii) In 544.95 Cu.M.

Cement Mortar.Removal Of Existing

Building Foundation and Super Structure

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc.

c stacking of serviceable materials and

disposal of unserviceable materials with

all lead and lift.

i 10 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 5 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including

d 2000 distempering and stacking the materials 3.63 Kg.

with all lead and lift.

Dismentling doors, windows, ventilators

etc. (wood or steel) shutters including

chowkhats architraves, hold fasts and

e 2 185.85 Each

other attachment etc. complete and

stacking them with in all lead and lift.

(i)Notexceeding 3 Sq.M. in area.

Removing & Scrapping of Old

deteriorated Plaster of any thickness from

Masonary / R.C.C. member including

stacking of serviceable material &

disposal of un serviceable from site of

work with all lead & lift.

Dismentaling any type tiled of stone floors

laid in mortar including stacking of

g 50 serviceable materilas and disposal of 47.25 Sq.M.

unserviceable materials with all lead and

Excavation for foundation including

sorting out stacking of useful material &

2 disposing of excavated stuff upto 50 mt.

lead. Loose & Soft soil.Excexuted With

Mechanical Effort

a 2309 up to 1.5 mt. depth 115.92 Cu.M.

b 1972 1.5 to 3.0 mt. depth. 128.52 Cu.M.

c 1864 3.0 to 5.0 mt. depth 141.11 Cu.M.

Add extra for Disposing off the excavated

d 100 stuff of above items for lead of (A) 50 m 17.28 Cu.M.

Add extra for Disposing off the excavated

e 100 stuff of above items for lead of (B) 100 m 34.56 Cu.M.

Providing and installing cast in situ single

under reamed piles of specified diameter

and length below pile cap, excluding the

cost of Concrete, steel reinforcement but

f including the cost of boring with bentonite

solution and the length of the pile to be

embedded in pile cap etc. all complete.

(Length of pile for payment shall be

measured upto to the bottom of pile cap) :

i 20 400 mm dia. Piles 638.83 Rmt.

ii 20 450 mm dia. Piles 705.03 Rmt.

Extra over single under ream for

providing additional bulbs in under

reamed piles, under specified diameter

excluding the cost of Concrete, steel

reinforcement (only the nos. of extra

bulbs are to be paid).

t 2 400 mm dia. Piles 813.05 Each

ii 2 450 mm dia. Piles 1103.43 Each

Provdg. & laying cement concrete 1:5:10

(1 cement : 5 course sand : 10 hand

3a 1 broken aggregates 40 mm nominal size) 2492.52 Cu.M.

and curing complete, excluding cost of

form work in foundation & Plinth.

Provdg. & laying cement concrete 1:3:6

(1 cement : 3 coarse sand : 6 hand

3b broken stone aggregates 40 mm nominal

size) and curing complete excluding cost

of form work in

625 (A) Foundation and plinth 2976.00 Cu.M.

Supplying of graded hand brocken stone

3c 231 size of 90 mm to 127 mm at site (Rubble 609.82 Cu.M.

Labour charges for spreading the spouls

90 mm to 127 mm thick layer good earth

filling in voids correcting the grade &

camber comp. with rolling, watering, incl.

preparing thesurface by brushing for

removing all loose or dirts ect.comp.

Provdg. & laying cement concrete 1:4:8

(1 cement : 4 coarse sand : 8 hand

4 5 broken stone aggregates 40 mm nominal 2653.67 Cu.M.

size) and curing complete excluding cost

of form work in foundation& plinth.

Filling available excavated earth

(excluding rock) in trenches, plinth, sides

of foundations etc. in layers not

exceeding 20 cm. in depth consolidation

each deposited layer by ramming and

Conveyance charges of earth lime,

6 murrum, building rubbish, manure,

garbage, sludge, excavated rock, fly ash,

aggregate of any kind etc. comp.

a 100 Conveyance charges 0 km to 1 km 46.63 Cmt

b 100 Conveyance charges 0 km to 2 km 60.69 Cmt

c 6000 Conveyance charges 0 km to 5 km 100.44 Cmt

d 6000 Extra For Lead on Above Item Above 5 9.26 Cmt

e 6000 Extra For Lead on Above Item Above 6 9.26 Cmt

f 6000 Extra For Lead on Above Item Above 7 9.26 Cmt

g 6000 Extra For Lead on Above Item Above 8 9.26 Cmt

Extra For Lead on Above Item Above

Filling in plinth with sand under floors

including watering, ramming,

consolidating, compacting and dressing

etc. completed.

Filling in foundation and plinth with

murrum or selected soil in layers of

7b 150 cm. thickness including watering, 286.20 Cmt

ramming and consolidating etc.

Brick work using common burnt clay

building bricks having crushing strength

8 not less than 35 kg/Sq. cm. in cement

mortar 1:6 (1 cement : 6 fine sand)

conventional brick

a 109 (a) in foundation & Plinth 3981.21 Cu.M.

b 532 Super structure Upto Floor Two Level 4253.46 Cu.M.

c 567 Super structure Above Floor Two Level 4293.55 Cu.M.

I.Half brick masonry in common burnt

clay building bricks having crushing

strength note less than 35 Kg/Sq. Cm. in

cement mortar 1:4 (1 cement : 4 coarse

sand) using conventional brick in Super

structure upto floor Four level

a 476 All Floor Level 646.70 Sq.M.

Providing and laying controlled cement

concrete of M-25 Grade and curing

complete, Excluding the cost of form

work, Scaffolding, cost of reinforcement

for reinforced concrete work For any

Height up to any FloorLevel.

a 54 Foundations,Raft,Footings,Mass concrete 4238.04 Cu.M.

b1 2 RCC Retaining wall at All Floor 4519.88 Cu.M.

Tie-Beam, Lintel , Beam- Bracket, Stair

Case & Landing, Coping ,Slab, balcony,

weather shed, loft , any cantilever etc All

Columns,Pillars, posts and struts at All

Providing and laying controlled cement

concrete of M-20 Grade and curing

complete, Excluding the cost of form

work, Scaffolding, cost of reinforcement

for reinforced concrete work For any

Height up to Floor Four Level.

a 10 Foundations,Raft,Footings,Mass concrete 3977.88 Cu.M.

Tie Beam , Lintel , Beam- Bracket

b1 175 Coping ,landing, Slab, balcony, weather 4460.36 Cu.M.

shed, loft , any cantilever etc at All Floor

c1 3 Column at All Floor 4558.20 Cu.M.

d1 1 Stair Case All Floor 5418.91 Cu.M.

Providing and laying in position Ready

Mixed M250 grade concrete for reinforced

cement conctere work , using cement

content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for all lead having

continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from transit

mixer to site of laying with all lead and lift,

excluding the cost of centering shuttering

finishing and reinforcement including cost

of admixtures in recommended

proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer

- in charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be

maintained) (Cement level 450 kg )

Providing and laying in position Ready

Mixed M200 grade concrete for reinforced

cement conctere work , using cement

content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for all lead having

continuous agitated mixer, manufactured

as per mix design of specified grade for

reinforced cement concrete work

including pumping of R.M.C. from transit

10.4 10 mixer to site of laying with all lead and 4793.10 Cu.M.

lift, excluding the cost of centering

shuttering finishing and reinforcement

including cost of admixtures in

recommended proportions as per IS:

9103 to accelerate/ retard setting of

concrete, improve workability without

impairing strength and durability as per

direction of the Engineer - in charge.

Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained)

(Cement level 400 kg )

Drilling suitable holes in reinforced or

plain cement concrete with power driven

drill machine to a minimum depth of

80mm upto 250mm in RCC beams,

lintels, columns and slabs to introduce

10.5 steel bars for sunshades/balconies

including fixing the steel bars in position

using Hilti Chemical HY200-R but

excluding the cost of reinforcement, all

complete as per direction of Engineer-In-

8 mm Dia in 80 mm Deep & 12 mm Dia

10 mm Dia in 100 mm Deep & 14 mm Dia

12 mm Dia in 120 mm Deep & 16 mm Dia

16 mm Dia in 160 mm Deep & 20 mm Dia

d 90 608.63 Each

20 mm Dia in 200 mm Deep & 25 mm Dia

25 mm Dia in 250 mm Deep & 32 mm Dia

Providing and laying controlled cement

concrete 1:2:4( 1cement : 2 coarse sand :

4 Graded stone aggregate 20 mm

11 nominal size ) and curing complete,

Excluding the cost of form work and

reinforcement for reinforced concrete

a 4 Foundations, footings, base of 3923.53 Cu.M.

columns,grade slab and mass concrete.

slab, landing shelves, Balconies, lintels,

b 1 beams, girders, and cantilever, up to 4012.47 Cu.M.

aany floor level.

P/A Trimix with dewatering machine and

floater machine on constructed R.C.C.

c 1535 54.00 Sqmtr

work incl. cost of machine and labour etc.

comp. as directed.

Making 15 mm Groove in R.C.C work on

d 550 road and filling it with poly sulfied selant 30.00 Rmt

and finished it good incl. all labour

charges etc. comp. as directed

Providing and laying and fixing 25 mm

thick expansion joint by hydrocell semi

rigid UV resistance with high performance

e 14 738.13 Sqmt

laminated closed cell polythene foam joint

filler in sheet foam as directed, etc.

Providing form work in ordinary timber

planking so as to give a rough finish

including centering, shuttering, strutting

and propping etc. height of propping and

centering below supporting floor to celling

not exceeding 4 M & removal of the same

for in situ reinforced or plain concrete

a 1029 (A) Foundation, footings, bases of 171.68 Smt

columns etc. and mass concrete.

b 3359 (B) Flat surface such as soffits of slabs, 252.00 Smt

landing and the like

c 1443 (C) Vertical surfaces such as walls (any 229.95 Smt

thickness) partitions.

(D) Columns, pillars, posts & struts.

d 2480 (1) Square, rectangular, polygonal in plan 297.68 Smt

e 20 (2) Circular or curved in plan. 422.10 Smt

(H) (1) Sides and soffits of beam,

haunchings cantilevers, girders,

bressumers, Coping and lintels not

exceeding 1 M in depth.

(2) Sides and soffits of beam, haunchings

g 10 cantilevers, girders, bressumers and 259.88 Smt

lintels exceeding 1 M in depth.

h 118 (L) chullah hoops, weather sheds, 155.78 Smt

chhajas, carbels etc including edges.

(M) Staircase with-sloping or stepped

i 400 soffits incl. risers & strings excluding 242.55 Smt

Extra for additional height of propping and

centering where the height of propping

and centering exceeds 4 .O M between

j 100 supporting floor to ceiling including 386.48 Smt

temporary brick or stone pillars for

supporting as required. (i)Height more

than 4.0 M.and upto 5.0 M.

Providing T.M.T Fe 500D bar

reinforcement for R.C.C. work including

bending, binding and placing in position

complete up to any floor level..

a 293942.5 All Floor Level 75.46 Kg.

Providing and laying polished Kota stone

slab (Polished / River Finish, Green

colour ) flooring over 20 mm. (average)

thick base of cement mortar 1:6 (1

cement : 6 coarse sand) or lime mortar

1:1.5 laid over and joined with grey

cement slurry including rubbing and

polishing complete.25 mm th.

Providing and laying polished Kota stone

slab 25 mm. thick in Platform ,Riser of

Stair , Skirting, Tread , dado and pillars

laid on 10 mm. thick cement mortar 1:3 (1

cement : 3 coarse sand) jointed with grey

cement slurry including rubbing and

polishing and MAking groove where it is

Required etc. compl

Providing and laying white/Colur glazed

tiles 6 mm thick in flooring treads of steps

and landing laid on a bed of 12 mm thick

cement mortar 1:3 (1 cement : 3 coarse

sand) finished with flush pointing in white

Providing and layingWhite / Colour glazed

tiles of size 600 mmx300mm x 8 mm /

300 mmx 450mm x 8 mm in skirting,

17 290 risers of steps, Floor and dedo on 10 mm. 1426.95 Sq. M.

thick cement plaster 1:3 (1 cement :

coarse sand) and jointed with white

Providing and laying marble stone slab

flooring over 20 mm. (Average) base of

cement mortar 1:6 (1 cement: 6 coarse

18 2 sand) or L.M. 1:1.5 laid and jointed with 2194.63 Sq. M.

grey cement slurry including rubbing and

polishing complete: (A) Marble slab

Providing and laying Vitrified tiles 8 to

mm thick , 24'' x 24'' in flooring treads of

steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing

in white cement.

Providing and laying Vitrified tiles 8 to

mm thick , 24'' x 24'' in skrting risers of

19b 4340 steps and dedo on 10mm thick cement 1130.15 Sq. M.

plaster 1:3 (1cement : 3-coarse sand) and

jointed with white cement slurry

P & L 24" x 24" vitrified 8 mm thick tile

20 mm (average) base of cement mortar

1:6 ( 1cement: 6 coarse sand) on new

surface or fixing on existing flooring by

adhesive material including dismentaling

of existing flooring and jointed with color

cement slurry including finised with flush

pointing & cleaning the surface etc.

complete for Antiskid

Providing and Fixing 18 mm thick

concrete base exposed brick cladding

including surface waterproffing, polymer

19d 68 modified tile adhesive and polymer 3574.35 Sq.M.

modifies tile grout ( grey / white) with

neccesary scafolding etc compl. As per

direction of engg. Incharge.

Providing and Laying Tactile Tile (For

Vision Impaired Persons as per

Strandards) of Size 300x300x9.8 mm

Having with Water Absorption less than

0.5% and Confirming to is:15622 of

Approved Make in all Colours and

Shades in for Outdoor floors such as

19e 160 footpath, Courtyard, Multi models 1663.72 Sq.M.

Location etc., laid in 20 mm Thick Base of

Cement Mortar 1:4 ( 1 Cement :

Course Sand) in all Shapes & pattern

including Grouting the Joints with White

Cement mixed with Matching pigment etc.

Complete as per Direction of Engineer-in-

Providing and laying Ceramics tiles 6 to

8 mm thick in flooring, treads of steps,

20 10 landing and dedo on 12 mm. thick cement 960.47 Sq. M.

plaster 1:3 (1 cement : 3 coarse sand)

and jointed with white cement slurry.

Providing & Laying 18 mm thick Mirror

polish granite For flooring , counter , stair

-riser , tread , skirting , dedo , Jambs etc.

machine cut or chiselled on bed of

cement mortar 1:1 pointing with neat

cement slurry incl. moulding, Making

grooves where it is required etc. comp. as

per instruction of engineer in charge.

Provdg. 20 mm. thick Finish / Mala

cement plaster in single coat on fair side

22a of brick / concrete walls for interior

plastering upto any Floor level and

finished even and smooth in C.M.1:4.

i 6106 All Floor Level 190.58 Sq.M.

Provdg. 20 mm. thick Finish / Mala

cement plaster in single coat plastering

b on ceilings, Beam side and sofits of stairs

upto any Floor level and finished even

and smooth in C.M.1:4.

i 3952 All Floor Level 215.15 Sq.M.

Providing & fixing 23 cm wide chicken

c 1518 mesh jali with nails & then application of 292.59 Sq.mt

15 mm plaster on R.C.C. & masonary

joints as per dir. of engg. In charge.

Providing and mixing water proofing

materials in cement mortar in proportion

d 250 recommended by the manufacturer. etc. 48.77

comp. as per instruction of engineer in

Providing 20 mm th. Double coat Sand

face / Mala Cement Plaster on Walls upto

any Height Above Ground level consisting

23a 3350 of 12 mm th. Backing coat of C.M. 1:3 ( 1 297.68 Sq.M.

cement : 3 Ssand ) & 8 mm th. Finishing

coat of C.M. 1:1 ( 1 cement : 1 sand ) ets.

White / Color washing with lime on

undecorated wall surfaces (two coats) to

give an even shade including thoroughly

brooming the surface to remove all dirt,

dust mortar drops and other foreign

Providing & Applying 3 mm thick External

Wall Rustic Type Texture as per Design

& Make as Approved by Consultants /

Engineer in Charge. Work Includes All

Necessary Scaffolding Work upto Any

Finishing walls with Acrylic Smooth

exterior paint of required shade :New

work (Two or more coat applied @

ltr/10 sqm over and including priming coat

of exterior primer applied @ 2.20 kg/10

P./L. METALIC HERITAGE SURFACE

Providing and fixing of HERITAGE

textured homogeneous wall finishing

system from BAKELITE HYLAM LTD or

equivalent make consisting of a two

component system of (25 kgs per Pack)

made of 92% silica particles coated with

fade resistant pigments, 100% acrylic

polymer bonding agent (5kgs per pack)

24d 25 with the applied thickness of the coating 637.38 Sq.M.

being between 0.8mm-1.2mm to be

applied on acured, smooth level plaster

without keying, as per the

shades/combinations approved, as per

the manufacturer directions, for usages,

tobe applied by an approved applicator of

the manufacturer, as per the directions /

supervision of the engineers in charge, all

complete. Includes All Necessary

Scaffolding Work upto Any Height.

Wall Painting (two coats) with plastic

emulsion / Oil paint of approved brand

and manufacture and of shade required

on undecorated wall surfaces to give an

even shade, over and including a priming

25a 6500 coat with alkali resistance primer of 78.44 Sq.M.

approved brand and manufacture after

thoroughly brushing the surface free from

mortar droppings, and other foreign

matter and also including preparing the

surface even and sand -papered smooth

Extra over above item for every

subsequent coat of of wall painting with

plastic emulsion / Oil paint of approved

Applying two coats of Birla (white cement

based) or Asian (acrylic lapy-putty) or

equivalent & two coats of primer of

approved brand and manufacture on new

wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other

foreign matter and sand papered smooth.

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

mt.,refilling, trasporting the pipe to work

site, unloading, lowering in trenches,

laying and jointing the pipes in c.m. 1:1

incl. all jointing materials such as cement,

sand, hemp, bitumen as dire. testing the

pipe line to a head of 1.5 mt. and

hydraulic test as dire incl. watering

trenches, spreading , and carting away of

surplus earth within 100 mt.lead as dire.

a 130 23 cm dia. 344.64 Rmt

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

mt.,refilling, trasporting the pipe to work

site, unloading, lowering in trenches,

laying and jointing the pipes in c.m. 1:1

incl. all jointing materials such as cement,

sand, hemp, bitumen as dire. testing the

pipe line to a head of 1.5 mt. and

hydraulic test as dire incl. watering

trenches, spreading , and carting away of

surplus earth within 100 mt.lead as dire.

b 25 15 cm dia 211.05 Rmt

c 15 10 cm dia. 288.23 Rmt

Constructing brick masonry chamber for

under ground C.I. Inspection chamber

and bends with bricks having croshing

strength not less than 35 Kg. Cm2 in C.M.

1:5 C.I. cover with frame (Lightduty)

455mm x 610 mm intenal dimensions

total weight of cover with frame to be not

less than 38 Kg. (Wt. of cover 23Kg.) and

27 18 Wt. of frame 15Kg.) (R.C.C.top slab with 3863.85 No.

1:2:4 mix (1-cement:2-coarse sand:4-

graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster

15 mm thick with cement mortar 1:3

finished smooth with a floating coat of

neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions

mm x 610 mm and up to 850 mm deep

Constructing Manhole with R.C.C. top

slab in 1:2:4mix (1-cement: 2-coarse

sand:4-graded stone aggregate 20 mm

nominal size) foundation concrete 1:3:6

mix (1-cement:3-coarse sand:6-Brick bats

40+50mm size) inside plastering 15mm

thick with Cement Mortar 1:5 (1-

Cement:5-coarse sand) finished with a

floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-

Cement:2 -Coarse sand:4-stone

aggregate 20 mm nominal size) finished

smooth complete including curing and

festing (i) Inside size 900mm x 1200mm

and up to 1.5M. deep including C.I. cover

with frame size 560 mm diameter total

weight of cover and frame to be not less

than 128kgs. (Wt. of cover 64Kg. and Wt.

of frame 64Kg.) (A) With 230 mm thick

walls of brick masonry using brick having

crushing strength not less than

35Kg./Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2)B type depth

up to 1.50 Metre

Providing and fixing white vitreous china

flat back or wall corner type lipped front

urinal basin of 340x280x470 mm sizes

respectively with standard flush pipe,

Waster Pipe, Waste Coupling, PVc

Connection and G.I clamps complete,

including painting of fittings and brackets,

cutting and making good the walls and

floors wherever required : Cera Model

No. S4020103 or Equivalent

Providing and Fixing of C.P. Brass BIB

Cock of 15 mm Dia of Jaquar make

florentine series model no. 5047n or

equivalent make with all necessary

fittings. as approved by Engineer - in -

Providing and fixing brass screw down

Angle stop tap.(A) 15mm dia. Of Jaquar

make florentine series modelno. 5053n or

equivalent make with all necessary

fittings. as approved by Engineer - in -

Providing and fixing C.P. brass shower

d 10 rose with 15mm or 20mm inlet Shower 279.37 No.

Arm.(A) 100mm dia. Each

Provding and Fixing of autoclosing

pressmatic pillar cock / bib cock with all

necessary fittings of Polished Bright

Chrome Finish of Jaquar make model no.

031L65 or equivalent make as approved

by Engineer in Charge. Rate including of

cost of labour, material etc. in complete

Providing and Fixing of C.P. Brass Two

Way Bib Cock of 15 mm Dia of Jaquar

make model no. 041kn or equivalent

make approved make with all necessary

fittings. as approved by Engineer - in -

Providing and Fixing of C.P. Brass urinal

Valve Auto Closing System With Full Built

in Control Cock & Wall Flange of 15 mm

g 20 Dia of Jaquar make model no. 077 or 2568.08 No.

equivalent make approved make with all

necessary fittings. as approved by

Engineer - in - charge.,

Providing and Fixing of C.P. Brass Pillar

Cock Auto Closing System with Elbow

Operated Extended Lever of 15 mm Dia

h 30 of Jaquar Make Model No,031 MED or 3723.48 No.

Equvalent Approved Make & Model with

all necessary fittings. as approved by

Engineer - in - charge.,

Provdg. & laying S.W. Gully trap with C.I.

garting brick masonry chamber & water

tight C.I. cover with frame of 300 mm x

300 mm size ( inside) with standard

weight. sqare mouth trap size 150 x100

Providing erecting and fixing double

31 2000 coated ISI water tank of required capacity 3.91 Litre

each with all necessary fittings and

connection etc. complete on terrace

Extra rate over item of excavation of earth

for excavation of asphalt pavement/RCC

of thickness up to 0.20 meter including

32 20 demolishing the asphalt carpet, metal, 71.43 Sq.M.

soiling / cutting Reinforcement etc.comp.

with stacking the material as directed.-up

to 0.20 meter thickness

Providing and fixing PVC SWR Nahni trap

IS 14735 for drain - 100 mm diameter

with jali of the

33 55 following nominal diameter of self 565.43 No.

cleansing design with C.I scread down or

hinged grating including the cost of

cutting and making good the walls.

Provdg. And fixing Concealed / Open to

wall, ceiling & floor in true line and level

UPVC pipe Schedule- 40 of make as

approved by engg. incharge. pipe shall be

fix on wall with the help of clamp at every

34a twi meter center to center of shall be

concealed as directed in cluding

neccesarry fitting etc. in cluding testing of

pipe and jointd and fixing the same with

adhesive solvent , including cost of all

materials of following nominal bore

ii 600 25 mm 90.93 Rmt

iii 15 32 mm 117.97 Rmt

iv 320 40 mm 146.65 Rmt

Providing and fixing concealed center

point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation

34b Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings

and clamps including making good the

wall, ceiling and floor etc. complete

i 5 15 mm 165.21 Rmt

ii 5 20 mm 202.97 Rmt

iii 5 25 mm 247.25 Rmt

iv 5 32 mm 330.36 Rmt

v 5 40 mm 437.66 Rmt

vi 5 50 mm 647.30 Rmt

Provdg. And fixing to wall ,ceiling and

floor 10.00 kg. F/Sq.Cm2 working

pressure polythelene pipes of the

35 following outside diameter, low, density,

complete with special flange compression

type fittings, wall clips etc. making good

wall ceiling and floor.

b 130 (A) 75mm dia 274.68 Rmt

c 400 © 110 mm dia 332.91 Rmt

Providing and fixing water closet

squatting Pan ( Indian type W.C. Pan)

36 8 size 580mm (A)VitreousChina. (I)Long 1351.15 No.

pattern = White colour with Trap and Pair

Providing and fixing white vitreous china

extended wall mounting water closet of

Cera Make S1043101 Carat Model Or

Equivalent Model With EWC Soft Close

Seat Cover, Chair Bracket, nuts, bolts

and gasket etc complete.

Providing and fixing chromium plated

brass half trun flush cock of approved

quality including fixing in pipe line etc.

Providing and fixing Health Faucet of

Jaquar make model no. 573 oe

c 28 equivalent make as approved by engg. In 1543.36 No.

charge with flexible tube upto 1 metre

long etc. complete.

Providing and fixing 24"x18"x8" Carysil

Elegance or Equivalent Make of Single

38a 2 Bowl Sink S.S. Matt Finish With Waste 7960.60 No.

Coupling, Waste Pipe,etc. cutting and

making good the walls wherever required.

Providing and fixing Under counter Wash

basine including 15 mm C.P. Brass Pillar

tap, 32 mm C.P. Brass Waste of

Standard make, Include All Accessaries,

b 18 Cutting & Making good the wall / granite 6641.14 No.

Wherever Required in White Color :

Model S2030101 of Cera Clair Series or

Equivalent make Waash basine of size :

Providing and fixing Wall Hung wash

basin Including 32 mm C.P. brass waste

of standard pattern, Include All

c 20 Accessaries, cutting and making good 3825.20 No.

the walls / granite wherever require:In

White Color : Cera Cadal Or Equivalent

Make Wash basin of size 515 x 410 mm

Providing and Fixing White Vitreous

China Laboratory Sink with C.I. Brackets,

C.P. Brass Chain with Rubber Plug,

mm C.P. Brass Waste and 40 mm C.P.

d 4 Brass Trap with Necessary C.P. Brass 5581.19 No.

Unions Complete, Including Painting of

Fittings and Brackets, Cutting and Making

Good to Wall / Granite Wherever

Required: Size 600 x 450 x 200 mm

Provdg. & fixing 600mm x 450 mm

Bevelled edge mirror of superior glass

39a 35 mounted of .6 mm th. A.C. sheet or 825.48 No.

plywood sheet and fixed to wooden pluge

with C.P. brass screws and washers.

Provdg. & fixing C.P..Brass towal rail

complete with C.P. brass brackets fixed

to wooden plugs with C.P. Brass

screws.(600 mmx 20 mm size)

Providing and fixing ball valve (brass) of

41 approved quality, High or low pressure,

with plastic floats complete :

i 14 15 mm dia 886.22 No.

ii 1 20 mm dia 1099.94 No.

iii 40 25 mm dia 1552.93 No.

iv 20 40 mm dia 3312.60 No.

v 5 50 mm dia 4613.48 No.

42a Providing and fixing Full Way valve (HEX)

with wheel of approved quality :

i 6 15 mm Full Way valve (HEX) 1461.17 No.

ii 1 20 mm Full Way valve (HEX) 1924.61 No.

iii 12 25 mm Full Way valve (HEX) 2535.55 No.

iv 1 32 mm Full Way valve (HEX) 3377.64 No.

v 10 40 mm Full Way valve (HEX) 4661.10 No.

vi 5 50 mm Full Way valve (HEX) 6675.14 No.

Providing and Fixing of C.P.Brass Pillar

Cock of 15 mm Dia of approved make

with all necessary fittings. as approved by

Engineer - in - charge.,

b 10 Providing fixing of SS grab bar with all 1937.24 No.

hardwares for Physically Handicap toilet.

Providing and laying integral cement

based water proofing treatment including

44a 850 preparation of surface as required for 1150.48 Sq.M.

treatment of roofs, balconies, terraces etc

consisting of following operations:

(a) Applying a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed

with water proofing compound conforming

to IS. 2645 and approved by Engineer-in-

charge over the RCC slab including

adjoining walls upto 300 mm height

including cleaning the surface before

(b) Laying brick bats with mortar using

broken bricks/brick bats 25 mm to

mm size with 50% of cement mortar 1:5

(1 cement : 5 coarse sand) admixed with

water proofing compound conforming to

IS : 2645 and approved by Engineer-in-

charge over 20 mm thick layer of cement

mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineer-in-charge to

required slope and treating similarly the

adjoining walls upto 300 mm height

including rounding of junctions of walls

(c) After two days of proper curing

applying a second coat of cement slurry

using 2.75 kg/ sqm of cement admixed

with water proofing compound conforming

to IS : 2645 and approved by Engineerin-

(d) Finishing the surface with 20 mm thick

jointless cement mortar of mix 1:4 (1

cement :4 coarse sand) admixed with

water proofing compound conforming to

IS : 2645 and approved by Engineerin-

(e) The whole terrace so finished shall be

flooded with water for a minimum period

of two weeks for curing and for final

test.“All above operations to be done in

order and as directed and specified by

the Engineer-in-Charge :and shall be

guaranteed for minimum period of

years after handing over the completed

building by the main contractor to be

finished as directed. Stamp paper

guarantee 10 years to be furnished

before receiving any payment from the

With average thickness of 120 mm and

minimum thickness at khurra as 65 mm.

Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme

out upto surface using white cement

including rounding off junctions and

extending them upto 15 cm along the

wall,clearing with water and oxalic acid

etc. as directed.

Providing and applying fibre reinforced

elastomeric liquid water proofing

membrane with resilient acrylic polymers

having Sun Reflectivity Index (SRI) of

on top of concrete roof in three coats

@10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing

liquid (dilution with water in the ratio of

c 490 3:1) and two coats of undiluted 562.40 Sq. M.

elastomeric waterproofing liquid (dry film

thickness of complete application/system

not less than 500 microns). The operation

shall be carried out after scrapping and

properly cleaning the surface to remove

loose particles with wire brushes,

complete in all respect as per the

direction of Engineer-in-Charge.

Filling in Sunken Portion with good

Quality Aerated light weight concrete

block having crushing strength not less

than 35 kg/sqcm and where directed by

d 63 the Architect / Engineer-in-charge, in 4559.61 Cmt

sunk in layer. including watering,

ramming where it is required etc.

complete, as directed by the Architect /

Engineer-in-charge .

Providing and laying cement concrete

flooring ( I.P.S.) 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate

20mm nominal size) laid in one layer and

finished with a floating coat of neat

cement. (B) 50mm thick.

Providing and fixing M.S. grills/ Gate of

required pattern to wooden/ Granite

frames of windows etc. with M.S. flats at

required spacings and frame alround,

square or round bars with round headed

bolts and nuts or by screws all complete

as per the structural designs and

directions of Engineer in charge

Providing & Fixing Structural steel work (

Confirming to IS 4923-1997) riveted,

bolted or welded in builtup for all type

sections, in framed work, including

b 2000 cutting, hoisting, fixing in position and 126.68 Kg.

applying a priming coat of approved steel

primer all complete as per the structural

designs and directions of Engineer in

Applying priming coat over new steel and

other metel surface after and including

preparing the surface by throughly

cleaning, oil, grease, dirt and other

c 700 34.34 Sqmt

foreign matter and scoured with brushes

fine steel wood, scrapers and sand paper

with ready mixed priming paint brushing

Painting two coats (excluding priming

coat) on new steel and other metal

surface with enamel paint, brushing,

d 700 interior to give an even shade including 86.94 Sqmt

cleaning the surface an even shade

including cleaning the surface of all dirt,

dust and other foreign matter.

Providing & Fixing 1.2 mm Thick S.S.-304

Grade 900 mm to 1150 mm High S.S.

Railing having Hand Rail Member of

mm Dia., 4 No. of Horizontal Pipe of

e 120 mm Dia. & Baluster Suppprt of 40 mm 2270.21 R.Mtr.

Dia. At Every Third Step as per Detail

Given. Rate Includes All Work Complete

as per Description & as per Direction of

Engg. in Charge.

Providing and fixing in position collapsible

steel shutters with vertical channels

20x10x2 mm braced with flat iron

diagonals 20x5 mm size with top &

47a 75 bottom rails of T-iron 40x40x6 mm with 5391.23 Sq. M.

38 mm dia. Steel pulleys complete with

bolts , nuts , locking arrangement

stoppers , handles including applying a

priming coat of red lead paint.

Providing corrugated 0.80 mm (22

gauge) thick G.I. sheets roofing fixed with

galvanized iron ‘J’ or ‘L’ hook bolts, and

b 5 nuts 8 mm. dia with bitumen and G.I. 719.93 Sq.M.

limpet washers filled with white lead

complete excluding the cost of purlines,

rafters and trusses.

Providing valleys 900 mm. overall in plain

1.6 mm. thick G.I. sheet Class – 3 fixed

c 2 with ‘J’ or ‘L’ hook bolts and nuts 1042.78 Sq.mt.

galvanized from ‘J’ or ‘L’ hook bolts and

bitumen washers complete.

Providing and fixing rolling shutters of

approved make made of 80 mm wide

M.S. laths inter-locked together through

their entire length and jointed together at

the ends by end locks mounted on

48a 9 specially designed pipe shaft with bracket 3468.72 Sq.M.

plates, guide channels and arragements

for inside and outside locking with push-

pull operation including the cost of hood

cover and spring etc. complete.(A)

Shutters having width below 3.5 M.

Providing and fixing rolling shutters of

approved make made of 80 mm wide

M.S. laths inter-locked together through

their entire length and jointed together at

the ends by end locks mounted on

b 12 specially designed pipe shaft with bracket 4450.51 Sq.M.

plates, guide channels and arragements

for inside and outside locking with push-

pull operation including the cost of hood

cover and spring etc. complete. (B)

Shutters having width 3.5 M. and above

Providing and fixing 27mm domal Series -

1.2 mm Th. Alluminium Section Three

track Sliding window With Metalic Powder

49a 155 Coating and 4 MM Clear Glaas(Non 6373.85 Sq. M.

Tuffen) Include All Accessaries and

Fixture etc. complete as per the direction

of Engineer-in-charge.

Providing and fixing 27mm domal Series -

1.2 mm Th. Alluminium Section Two track

Sliding window With Metalic Powder

b 46 Coating and 4 MM Clear Glaas(Non 4999.10 Sq. M.

Tuffen) Include All Accessaries and

Fixture etc. complete as per the direction

of Engineer-in-charge.

ALUMINIUM DOOR WORK

Providing and fixing Aluminium Door work

(Single Shutter OR Double Shutter with or

without fix glass) made from Jindal or

equivalent make Powder Coated (50

micron pure polyester coating )

,aluminium section frame built up

standard tubular and other section of

approved make confirming to IS 733 and

IS 1285 , member size with shutters of

horizontal member , vertical member

Confirming to IS733 and IS 1285 fixed

with rawl plug abd screws or fixing clips

or with expansion hold fasteners including

necessary filling up of gaps at junctions at

top bottom and sides with required PVC/

c 51 Neoprene felt, 8/12 mm toughened glass 5401.70 Sq. M.

of approved make etc. Aluminum sections

shall be smooth, rust free, straight.mitred

and jointed mechanically wherever

required including Door Hardware such

as cleat angles aluminum snap beading

for glazing /paneling, CP Brass/ Stainless

steel screws, Stoppers, heavy duty floor

hing, S.S. Hinges, aldrop , Locking

system, heavy duty Floor Springs, Pivot

and fixtures and transparent silicon

sealant glass fixing to frame as per

details all complete as per architectural

drawings and the direction of Engineer in

Charge. rate incl. all type of alumnium

sections for doors as per the detail

Architectural dwg.

Providing and fixing standared extruded

of alluminium section of size 63 mm x

38.10 mm x 1.2mm (Section:2434, @

50 a 20 Wt.0.643Kg/mt ) with colour anodized 1163.92 Sq. M.

alluminium frame for ventilation with

mm thick frosted glass as details etc

complete for Ventilation

Providing and fixing standared extruded

of alluminium section of size 63.50 x

38.10 x 1.95 mm ( Section no:

@Wt 1.094 Kg / Rmt with colour anodized

alluminium frame with 5 mm thick

transparent bronze colour tinted float

glass as details etc complete for Fix

Providing Fixing 1.2 mm thick Alluminium

Section Partition -Fully Glazed / Partly

Panelled Partly Glazed / Fully Panelled

Having Size of Section of 2.1/2 x 1.1/2

with 4 mm Compact Sheet / 5 mm thick

Glass Fixing with 4 mm thick EPDM

Rubber etc. Complete as per Direction of

Consultant / Engg.incharge.

Providing Fixing 1.2 mm thick Alluminium

Section Partition Door -Fully Glazed /

Partly Panelled Partly Glazed / Fully

Panelled , frame Having Size of Section

of 2 .1/2 x 1 .1/2 and Door Section

Having Size of Tips Vertical 1 .3/4 x

.3/4, Top Rail 4 x 1 .3/4, Middle Rail

.3/4 x 1 .3/4, Bottom rail 4 x 1 .3/4 with

mm Compact Sheet / 5 mm thick Glass

Fixing with 4 mm thick EPDM Rubber

Including Lock, Handle, Door Closer,

Door Stoper, Stopper etc Complete as

per Direction of Consultant /

Providing and fixing Structural Glazing

with using the 17 Micron anodised of

approved colour alluminium section as

transium, mullium of size 63mm x 38mm

x 2 mm with using 6 mm thick reflective

structural glass of approved make, colour

/ Tinted, toughned and shade and fixed

with silicone sealant and spacer tap and

at corner sealed neoprene foam dust and

Air sealed gasket mirred including

scaffolding, cleaning of glass

etc.complete at all heights anf lifts with all

necessary fitting and fixtures, anchore

51a 8 fasteners, necessary M.S. or Aluminium 3953.75 Sq.mt.

brackets, suitable design for openable or

sliding window as per Architectural

drawing and as directed by Engineer-in-

charge. Grooves between the glasses to

be filled with sealant of Dow corning -

structural sealant 995, weather sealant

789. The entire facade should be water

proof. The mullions are to be connected

to bracket by SS-304 nut bolts.

Measurement shall be given as per actual

execution of the work. (Rate are included

providing & fixing of MS structure steel

work wherever Required)

Providing and fixing ISI marked 35 mm

thick flush door shutters conforming to IS

: 2202 (Part I) decorative type, core of

block board construction with frame of 1st

class hard wood and well matched teak

ply veneering with vertical grains or cross

bands and face veneers on both faces of

shutters with 1.00 mm thick Decorative

52a 68 Laminated Sheet on both faces of 4332.15 Sq.mt.

shutters including ISI marked Stainless

Steel butt hinges, bright /matt finished

125 mm Stainless Steel handles of

approved quality & make, ISI marked

oxidised M.S. door latches / Aldrop

Conforming to IS:5930 with necessary

screws etc. complete as per direction of

Engg. incharge.

Providing wood work in frames of Doors,

windows cleare story windows and

othersimilar works wrought, framede and Cu.Decim

fixed in position. (A) Indian Teak Wood

Providing & Fixing Fluted Glass Partition

and Door Using 16 x 45 mm Powder

Coated Alluminium Section with 8 mm

Thick Fluted Toughened Glass Including

Lock, Handle, Floor Spring, Connector,

Silicon and All Other Accessaries

including Making Pit etc Complete as per

Direction of Consultant / Engg.incharge.

Providing & Fixing Profile Shutter Using

16 x 45 mm Powder Coated Alluminium

Section with 5 mm Thick Fluted

d 200 Toughened Glass, Concealed Handle 14838.39 Sq.mt.

Section and Hinges Including All

Accessaries etc Complete as per

Direction of Consultant / Engg.incharge.

Providing and fixing of approved make

Clean room doors. Doors should be

finished in Powder Coating with thickness

of 60 microns approx. in desired Shades.

The manufacturer company must be ISO

9001-2015 certified. The door frame is a

Single rebate profile of minimum size

105mm X 57 mm made out of 1.2 mm

minimum thick galvanized steel sheet.

The frame is finished with Powder

Coating in desired Shade. Frame having

provisions and necessary Arrangement

e 75 for receiving appropriate hardware like 10705.16 Sq.mt.

lock and hinges. The door leaf shall be a

minimum 46mm thick fully flush double

skin door with vision lite of DGU Glass of

Size 300 x 300 mm x 6 mm . The door

leaf shall be manufactured from 1.0 mm

thick galvanised steel sheet. Door

Includes SS 304 Hinges, D type Pull

Handle-SS 304, Mortise Deadlock with

cylinder - 70mm both side key , Flush

type tower bolt, Door Seal , Door Closer

etc. Complete as per Standard

Providing and fixing of approved make

radiation-proof lead line door with

galvanised steel. Recommended lead

door design should be a sandwich-type

panel with both sides GI Sheet with a

minimum 2mm Lead infill. Doors should

be finished in Powder Coating with

thickness of 60 microns approx. in

desired Shades. The manufacturer

company must be ISO 9001-2015

certified. The door frame is a Single

rebate profile of minimum size 105mm X

57 mm made out of 1.2 mm minimum

thick galvanized steel sheet & with 2mm

f 19 lead infill. The frame is finished with 27488.83 Sq.mt.

Powder Coating in desired Shade. Frame

having provisions and necessary

Arrangement for receiving appropriate

hardware like lock and hinges. The door

leaf shall be a minimum 46mm thick fully

flush double skin door without vision lite.

The door leaf shall be manufactured from

1.0 mm thick galvanised steel sheet. Door

Includes SS 304 Hinges, D type Pull

Handle-SS 304, Mortise Deadlock with

cylinder - 70mm both side key , Flush

type tower bolt, Door Seal , Door Closer

etc. Complete as per Standard

Providing and fixing 35 mm th. Shutters

for doors windows & clearstory windows

incl. wood frames as specified 12 cm. x

53 7cm. size incl. anodised alluminium

fixtures and fastenings including primer

coat of approved quality and two coats of

oil paint etc. complete.

a 3 Fully glazed 4788.50 Sq. M.

b 3 Fully panelled 5478.89 Sq. M.

c 3 Partly panelled and partly glazed 5133.69 Sq. M.

Providing and Fixing FRP FRAME size

125 x 65 mm and 35 mm thick FRP

shutter with wood grain raised pannel

design finish shutter having extra

reinforcement on sides and edges and in

polish finish The core of the shutter is to

be filled up with injected fire extingushing

grade.polyurethane foam done in situ

along with embedded wooden pieces for

stiffering and also for tacking hinges and

fixtures. The whole FRP frame and

shutter is to be water proof.weather

proof,tennite proof and resistance to mild

acid/ Alkali, Rates are to be inclusive of

S.S. hinges with necessary screws and

brass fixtures and fasening.

Making connection to the ex.M.H.in

running sewer incl. Dewatering and other

required machinery etc. of following dia

pipes at any convenient time. All

damaged work shall be well repaired as

per instructions. etc..complete.

a 1 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1 For Pipe 400 mm to 600 mm diameter 2232.14 No.

Making connection of galvanised Mild

steel distribution branch with galvanised

56 1 mild steel main 50mm to 80mm nominal 600.08 No.

bore by providing and fixing tee including

cutting and threading the pipes complete

Providing throating or plaster drip,

57a 2000 grooves and moulding to Wall , R.C.C. 41.25 Rmt

chajja and slab.

Providing & Laying cement vatta 10 cm x

10 cm in size quarter round in c.m. 1:1 (

57b 180 1 cement, 1 coarse sand) laid in one 23.45 Rmt

layers finishing with a floating of neat

cement watering etc complete as dire.

Carring out plinth treat ment to post

construction/ existing structure by

spraying chemical solution for termite

control treatment including labour and

material consist ment withI.S.I

specification. Using Chlordene and

Chiorpur files 20EC. As Per 6131_ paret-

II Consentration Weight one percent is

recommended i.e one litre 20EC chemical

emulsion with19 liter give1%

concrentration inclusive of one litre

chemical emulsion appication at the rate

of 5 Litre chemical/ Sqm of surface is

recommended as per I.S

Carring out timber treatment to all wood

work including drilling holes and spraying

oil based chemical solution on surface of

timber work for termite control including

labour and material etc. complete. Using

Chlordene 20EC. As Per 6113_part III

Consentration Weight 1.00 percent is

recommended one litre chemical

emulsion dillute with 9 liter of kerosene

precent concentration. Total dillute

concrentration will be10litre inclusive of

the litre chemical emulsion application

0.75/Litre chemical per one Sqmt printed

two coat wood surface.

Paver Block Providing and laying shot

blasted Non - interlocking, Paver blocks

of specified thickness, size, grade of

concrete and colour machine made and

blasting by automatic shot blasting

machine and high density of as per

approved sample of approved make for

footpath, parking areas, service

lanes,cross over and other areas as

mentioned in the drawing. Including

providing and laying 50 mm thick averave

bedding layer of coarse sand below paver

block as per required grading and

specification. Laid paver block shall be

mechanically compacted. The work of the

paving blocks shall be executed in line

60 200 and level by skilled mason of flooring 758.93 Sq.mt.

work only. Small size of paver block with

same specification shall be used at

residue or at end. It should be laid in such

a way that the no cutting of the paver

block to be necessary. If cutting of paver

block shall be required , than cut by

machine only and laying to be done by

skilled flooring mason. The finished

surface of the paver block shall have

coarse sand Texture Finish. Pave blocks

shall be compacted and shall be re-laid if

necessary. Actual laid area shall be

measured and paid without any wastage.

(A) 80 mm thick M-35 grade Grey Paver

block of size 200mm x 200mm. As per

SProviding and fixing pre-cast concrete

kerb stone of gray cement based

concrete block 30cm length,30cm height

and 15cm thick of M250 grade concret as

per approved design and including

excavation for fixing in proper line and

level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing double action

hydraulic floor spring of approved brand

and manufacture conforming to IS :

having brand logo embossed on the body

/ plate with double spring mechanism and

door weight upto 125 kg, for doors,

including cost of cutting floors,

62a 35 embedding in floors as required and 4558.89 No.

making good the same matching to the

existing floor finishing and cover plates

with brass pivot and single piece M.S.

sheet outer box with slide plate etc.

complete as per the direction of Engineer-

in-charge. With stainless steel cover plate

minimum 1.25 mm thickness

Providing and fixing aluminium extruded

section body tubular type universal

hydraulic door closer (having brand logo

with ISi, IS : 3564, embossed on the

b 40 body, door weight upto 36 kg to 80 kg 1626.10 No.

and door width from 701 mm to

mm), with double speed adjustment with

necessary accessories and screws etc.

Designing, fabricating, testing, installing

and fixing in position Curtain Wall with

Aluminium Composite Panel Cladding,

with open grooves for linear as well as

curvilinear portions of the building , for all

heights and all levels etc. including:

(a) Structural analysis & design and

preparation of shop drawings for pressure

equalisation or rain screen principle as

required, proper drainage of water to

make it watertight including checking of

all the structural and functional design.

(b) Providing, fabricating and supplying

and fixing panels of aluminium composite

panel cladding in pan shape in metalic

colour of approved shades made out of

4mm thick aluminium composite panel

material consisting of 3mm thick FR

grade mineral core sandwiched between

two Aluminium sheets (each 0.5mm

thick). The aluminium composite panel

cladding sheet shall be coil coated, with

Kynar 500 based PVDF / Lumiflon based

fluoropolymer resin coating of approved

colour andshade on face # 1 and polymer

(Service) coating on face # 2 as specified

using stainless steel screws, nuts, bolts,

washers, cleats, weather silicone sealant,

backer rods etc.

(c) The fastening brackets of Aluminium

alloy 6005 T5 / MS with Hot Dip

Galvanised with serrations and serrated

washers to arrest the wind load

movement, fasteners, SS 316 Pins and

anchor bolts of approved make in SS

316, Nylon separators to prevent bi-

metallic contacts all complete required to

perform as per specification and drawing

The item includes cost of all material &

labour component, the cost of all mock

ups at site, cost of all samples of the

individual components for testing in an

approved laboratory, field tests on the

assembled working curtain wall with

aluminium composite panel cladding,

cleaning and protection of the curtain wall

with aluminium composite panel cladding

till the handing over of the building for

occupation. Base frame work cost for

ACP cladding is included in this item rate.

The Contractor shall provide curtain wall

with aluminium composite panel cladding,

having all the performance characteristics

all complete , as per the Architectural

drawings, as per item description, as

specified, as per the approved shop

drawings and as directed by the

Engineer-in-Charge. However, for the

purpose of payment, only the actual area

on the external face of the curtain wall

with Aluminum Composite Panel

Cladding (including width of groove) shall

be measured in sqm. up to two decimal

Providing and Fixing Box type metal

letters forming composite box made from

1mm thick stainless steel plate of grade

304 having brush finish of following font

64 size to be fixed at Main Gate in english

and or Gujrati and including fixing

charges. etc. complete as per direction of

Engg. incharge. for Payment Purpose

Height of Letter will be measured.

a 960 Upto 300 mm Height 93.85 R. Inch

Providing and Fixing MURAL made out of

2mm thick s.s. plate grade 304, including

making necessary design as per Architect

dwg. Through laser cutting including

connection to the R.C.C./Masonary with

necessary frame,anchor

fastnuts,M.S.Plate etc. complete as per

direction of Engg. incharge.

Providing and Fixing Sinage - internal and

external signage boards with Vinyle Text

65b 20000 on ACP sheet / 2 mm th. S.S. Plate etc. 9.38 Sq.Inch

complete as per direction of Engg.

Providing and fixing retro Reflective Hi

Intensity Micro Prismatic Grade Board

using 2mm Aluminum / 4mm ACP, angle

iron 75 x 75 x 6mm. Descaling and

degreasing the board as per requirement

using epoxy reflactive process by screen

painting as directed etc. complete

including transporting and fixing in C.C.

1:2:4 with necessary excavation curing

etc. complete as per I.R.C. 67-2012

design. A warranty for 7 years for the

Retro reflective sheeting from original

manufacturer & a certified copy of 3 year

outdoor exposure test report from third

party test lab for the product offered shall

be submitted by contractor. (B)Class B

Type-4(MDR/ODR) retro reflective

Road marking with hot applied

thermoplastic paints with reflectorising

glass beads on bitumin surface providing

and laying a hot applied thermoplastic

compound 2.5 mm thick including

reflectorising glass beads @ 250gms per

sqm area, thickness of 2.5mm is

excluding of surface applied glass beds

as per IRC:35-2015. The finished surface

to be level, uniform and free from streaks

and holes. zebra patta /bump patta

65d 230 lane/center line/ edge line/cut patta. The 364.08 Sqmt

white color marking should provide

liminance coefficinet on cemend road

shalll be min 130 mcd/m2/lux and Asphalt

road shall be min 100 mcd/m2/lux during

the service life during the day time. The

marking should meet the performance

criteria for night time reflectivity, wet

reflectivity and skid resistance as

mentioned in the section-15 of IRC

352015. Warranty for the Retro reflectivity

should be two years.

CAT EYE/Pavement Marker(MNC two

nail) made out of acrylic

StreneAcrylonitrile or hi-impact poly

Steren fitted with moulded of

metheacrylate(MNC)reflector cube corner

reflector design,filled with tightly adhering

pooting compound as per ASTMD-788

65e 10 size 11.5x7x1.60 cms or 10x10x1.75 cms 160.71 Nos.

provided with bituminous adhesive in

sufficient quantity with each unit fixing

with two shrank .Reflector on both

side.Co efficient of lumination as per

specification and compressive strenth

tones at 23 degree centigrade etc.B)

Double side lenses.

Providing and fixing eco-friendly light

weight calcium silicate false ceiling tiles

having T egular edge & 15mm Thick

Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium

66a 1910 silicate ceiling tiles shall have, light 1632.63 Sq.mt.

reflection 85% non-combustible as per

B.S.476 part IV, 100% humidity

resistance and also having thermal

conductivity 0.043° w/m KC. for the best

thermal Insulation.

The Light weight calcium Silicate tile

shall be of approved texture Fine

fissured/ Spintone/ Cosmos having NRC

value of 0.5 & Globe having NRC value of

0.75 NRC or equivalent of size 595X595

mm to be laid on true horizontal level

suspended inter locking metal grid of hot

dipped galvanized steel sections

(galvanizing @ 120 grams per sqm

including bothside) consisting of main ‘T’

runner suitably spaced at joints to get

required length and size of 24X38 mm

made from 0.30 mm thick (minimum)

sheet, 1200 mm centre to centre, and

cross ‘T’ of size 24X28 mm made out of

0.33 mm (Minimum) sheet spaced

mm along spaced between main ‘T’ at

600 mm centre to centre to form a grid of

1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made

of 0.30 mm thick (Minimum) sheet to be

interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm

resting on periphery walls / partitions on a

perimeter wall angle pre-coated steel of

size (24X24X3000mm made of 0.40mm

thick (minimum)

sheet with the help of rawl plugs at

450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and

laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/

Cosmos/Spintone) in the grid including,

cutting /making opening for services like

diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required,

Main ‘T’ runners to be suspended from

ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with

12.5mm dia and 50mm long dash

fasteners, 4mm G.I. adjustable rods with

galvanized steel level clips of size

85X30X0.8mm, spaced at 1200mm

centre to centre long main ‘T’ bottom

exposed with 24mm of all T-sections shall

be pre-painted with polyester baked paint,

for all heights,

, as per specifications, drawings and as

directed by engineer-incharge.Note:- Only

calcium silicate false ceiling area will be

measured from wall to wall. No deduction

shall be made for exposed frames/

opening (cut outs) having area less than

0.30 sqm. The calcium silicate ceiling

tiles shall have NRC. Value of

(Minimum) for Fine fissured/ Spintone/

Cosmos and 0.75 NRC for Globe, light

reflection 85% noncombustible as per

B.S. 476 part IV, 100% humidity

resistance and also having thermal

conductivity. 0.043° w/m KC.for the best

thermal Insulation

Providing and fixing single layer water

proof gypusm board 12.5 mm thick of the

make New good Group Co.Ltd. or

equivalent & New good Group Co.Ltd.

company sections using water proof

board of size 1220 mm x 1830 mm x

mm suspended by G.I suspender of size

25 mm x 3 mm with intermediate channel

of size 18mm x40mm x0.80mm at

mm center to center ceiling section of

size 40mmx 35mmx 0.55mm at 457 mm

center to center and perimetre chanel A

of size 20mm x 27mm x 30mm x 0.50mm

at edges & drops including paper taps

and sofit cleat, anchor fastener, scoch

bolt connecting cleat joining compound

top coat on ceiling including making

necessary opening for light fitting, diffuser

etc. complete as per detail drawing as

Providing and Fixing 6 mm thick Lexan

Polycarbonate multi wall roofing sheet

fixed with hilti screw and rubber silicon

sealer and alluminium strip of size 50 x

mm etc complete as directed by Engineer

Manufacturing,testing ,supplying

loading,,transporting to work site,loading

unloading lowering in trenches,laying and

68 jointing RCC NP3 class pipes in C:M 1:1

including all jointing materials such as

cement,sand,hemp bitumen as directed

testing the pipe line to a head of 1.5 mt

and hydraulic test as directed etc comp.

a 175 300 mm Diameter 616.07 Rmt

b 10 450 mm Diameter 806.25 Rmt

Constructing Bombay Pattern Type Catch

x 0.60 depth up to 1 mt including

excavation, B.B.C.C.

(1:5:10), 23 cms thick brick maso. wall in

69 20 the prop. of CM 3125.00 No

(1:6) with 40 mm thick IPS flooring in the

bottom and 15 mm thick cement plaster

inside the catch pit in the proportion of

CM (1:3) with out jali etc. comp. as

CatchPit Jali Fixing P/F FRC catch pit jali

with frame 600mm x 600mm clear

opening etc. comp.. As directed by

engineer in charge.

PERCOLATION WELL

71 120 Drilling of pilot bore hole in Alluvial Strata 694.64 Rmt

by direct Rotary Rig of 250 mm.

72 120 Reaming 400 mm 212.50 Rmt

73 1 Electro Logging charges with carting 16071.43 Job

Providing and Installing 200 mm dia

74 60 IS:12818 upvc Casing Pipe "CM" class 1193.75 Rmt

Providing and Installing 200 mm dia

75 1 IS:12818 upvc End Cap, with Air Vent 669.64 Set

200 mm dia Regular with 1.5 mm sloted

size cage type trapezoidal shape wire

wound little carbon galvanized screen

confirming to IS:8110

77 10 Supply of Pea sized Gravel 2029.46 Cmt

78 1 Air Vent of 50 mm Bend 401.79 Unit

79 120 Lowering and Removing of Dropline up to 147.32 Rmt

80 1 Air Compressor 60 CFM/150 PSI 22205.36 Ls

Estimate For Civil Work With Total Rs.

Percolation Well

I. No. Qty Items Unit Rate Per Amount

Electrical Work Estimate

1 INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated multi

strand copper wires up to 10 mtr length

in below type of pipe erected with 6A

Modular type switch / bell push &

accessories and earth continuity of

following type, erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and

340 accessories erected concealed in 505.05 Pt

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are

of .ISI marked 1.1 KV Grade

ZHFR/HRFR PVC insulated multi strand

copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular

type switch and hum free EME four or

more step type electronic fan regulator

1.2 with separately mounted and

accessories with earth continuity of

following type erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with

textured/metallic/white front plate

modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

180 accessories erected concealed in 701.40 Pt

wall/ceiling complete

Point wiring for secondary light point with

2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV

grade ZHFR/HRFR PVC insulated multi

strand copper wires, in below type of

pipe to be erected complete with earth

continuity and necessary connection with

primary light with accessories erected on

Metal / PVC / wooden box covered

covered with appropriate front plate

modules erected on / in wall / ceiling for

open / concealed wiring. with necessary

Lamp holder / ceiling rose /

H.D.Connector as directed.as per pipe

erected with following type of

Note:- Maximum up to 6 mtrs length,

excess will be considered as Mains for

Secondary Point.

(f) with medium class Rigid PVC pipe and

260 accessories erected concealed in 174.30 Pt

wall/ceiling complete

Point wiring for Individual Plug with &

earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade ZHFR/HRFR

PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe

1.4 erected complete with Modular type

switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with

appropriate front plate modules erected

on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5

1.4.1 115 sq.mm Cu. Wire from nearby 530.25 Pt

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

[II] For 16A Plug and 16 amp switch with

1.4.2 110 2-2.5 sq.mm Cu. Wire from mcb db 774.90 Pt

(f) with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

[III] For 16A Plug and 16 amp switch with

1.4.3 12 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( 906.15 Pt

green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

Point wiring for on board Looped Plug

with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden

1.5 235 box, single mounting base frame covered 255.00 Pt

with textured / metallic/white front plate

modules erected on / in wall / ceiling

with following type accessories

Point wiring for Two Way Controlled Light

Point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires

erected in below type of pipe with 6A

Modular type switches and following type

of accessories erected on PVC /

Metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected.

with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

18 accessories erected concealed in 627.90 Pt

wall/ceiling complete

Providing following type of Modular Type

Accessories mounted with PVC /

metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate , modules

erected with necessary connections as

per site situation directed by Engineer In

1.7.2 40 (2) One No 5 pin plug 150.00 E.a.

1.7.3 90 (7) Blank Plate Single 25.00 E.a.

1.7.4 20 (8) Computer RJ-45 socket 159.00 E.a.

1.7.5 45 (9) 16 Amp. SP one way switch 179.00 E.a.

1.7.6 45 (10) 6/16Amp. Universal socket 198.00 E.a.

pole Modular MCB Switch

Pole Modular MCB Switch

Supplying and erecting approved make

suitable panel indicator LED type lamp,

lens cover, complete erected with

necessary connections.

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or

ceiling erected with necessary PVC

fittings & Junction boxes fixed with

adhesive solution & Clamps with following

dia of pipes, in approved manner as

Providing & erecting PVC Corrugated

1.9 Flexible Conduit with required nos. of

coupling, PVC bushes, Check-nuts etc.

complete of following sizes.

providing and erecting Mains with ISI

marked electrolyte stranded copper

conductor, Non PVC Zero Halogen free

fire retardant insulated copper conductor,

1.10 insulated wire (HRFR) conforms to IS-

694, erected in existing pipe with 1.5sq.

mm copper conductor of same

specifications for earth continuity of

following size.

In Existing medium class Rigid PVC pipe

and accessories

providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in

following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

(A) with medium class Rigid PVC pipe

and accessories

1.11.1 240 (c) 2 wire 10 sq. mm (use earth wire of 4 234.00 Mtr

1.11.2 40 (h) 4 wire 6 sq. mm 258.00 Mtr

(i) 4 wire 10 sq. mm (use earth wire of

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor

with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in

existing pipe of following size

(Specifically for control panel, relays,

power switchgears, motor starters &

control wiring) with required size of

copper lugs, nuts and bolts if required.

1.12.1 25 (e) One wire 6.00 sq. mm 56.00 Mtr

1.12.2 40 (f) One wire 10.00 sq. mm 91.00 Mtr

1.12.3 10 (g) One wire 16.00 sq. mm 141.00 Mtr

1.12.4 10 (h) One wire 25.00 sq. mm 234.00 Mtr

1.12.5 20 (i) One wire 35.00 sq. mm 298.00 Mtr

1.12.6 20 (j) One wire 50.00 sq. mm 466.00 Mtr

1.12.7 20 (k) One wire 70.00 sq. mm 663.00 Mtr

1.12.8 40 (l) One wire 95.00 sq. mm 910.00 Mtr

Supplying and erecting Flexible PVC

1.13 insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of

following size to be erected as directed.

e) 1.50 Sq.mm 3 core round PVC

h) 2.50 Sq.mm 3 core round PVC

k) 4.00Sq.mm 4 core round PVC

Supplying & erecting M.S. Box having

Gauge painted with red oxide or Heavy

duty PVC box erected flushed on wall or

concealed in wall with necessary

plastering & finishing as directed of

following size.

Supplying & erecting 20 Amp 10 KA

‘C Curve’ single pole MCB with 20 Amp.

1.15 Plug socket, company fabricated powder

coated sheet steel enclosure erected as

directed with connection.

1 [A] Metal Clad Socket with metal clad top 522.00 E.a.

SUB - TOTAL OF INTERNAL WIRING

Switchgears , Panels , MCBDBs &

Providing and erecting Approved make

Three pole moulded case circuit breaker

having breaking capacity ICU of 25 K.A.

at 415 V having normal current rating up

to 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C.

supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

3 ICS=100% of ICU only 5832.20 No

Providing and erecting Approved make

Three pole moulded case circuit breaker

having breaking capacity ICU of 25 K.A.

at 415 V having normal current rating up

to 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C.

supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

2 ICS=100% of ICU only 5302.00 No

Providing and erecting Approved make

Three pole moulded case circuit breaker

having breaking capacity/strength ICU of

35 K.A. at 415 V. having normal current

rating 125A.with Fixed thermal &

magnetic release suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

3 ICS=100% of ICU only 6510.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at

415 V. having Normal current rating

200A.with Microprocessor

release,Adjustable Overload Settings

from 0.25 to 1 In (in steps of

0.01),Conforms to IS/IEC 60947-2,

suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S.housing

2 ICS=100% of ICU only 23288.45 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA.

and above at 415 V . having normal

current rating 250A. with variable thermal

& magnetic release suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

1 ICS=100% of ICU only 20739.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 50 KA

and above at 415 V having Normal

current rating 400A. with variable

Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. With all

internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing.

1 ICS=100% of ICU only 27476.90 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 50 K.A.

and above at 415 V having normal

current rating up to 630A. with

Microprocessr release Adjustable

Overload Settings from 0.25 to 1 In (in

steps of 0.01) ,Conforms to IS/IEC

60947-2, suitable to work on A.C.supply

50 c/s. with all internal connections,

spreader tinned copper & complete

erected in existing 16 G.M.S. housing

1 ICS=100% of ICU only 40447.75 No

Providing and erecting Approved make

Earth fault Relay suitable to mount with

inter connection suitable to following size

of moulded case circuit breaker having

CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all

internal connections & complete erected

in existing M.S.housing..

Design, fabrication, assembling, supply,

installation, testing and commissioning of

cubicle type, wall / Floor mounted LT

panel suitable for 415 V 3 phase, 4 wire

50 Hz AC supply system fabricated in

compartmentised design from CRCA

sheet steel of 2 mm thick for frame work

,Doors and partitions IP 42 and covers,3

mm thick for gland plates i/c cleaning and

finishing complete 9 tank process in

house facility for powder coating in

approved shade, extendable type FP

aluminium alloy busbars of high

condectivity, DMC/SMC busbar supports,

entire panel shall have a common copper

earthbar of size 25mm X 5 mm OR 50 x

6mm aluminium at the rear with 2 Nos.

earth studs, solid connection from main

busbar to switchgears with require size of

aluminium busbar & control wiring with

1.5 sqmm FRLS insulated copper

conductor cable, cable alleys, cable gland

plates i/c accessrories as per

specification and providing switchgears,

metering instruments etc. for following

panel.G.A.Drawing to be approved by

EIC or consultant. ( Outgoing connectors

must be nut-bolt type. Outgoing mains for

63Amp MCBs must be of 4 x 16sqmm cu

flexible wires).Incomers Mains for MCBs

shall be always from the busbars.

( a ) Providing cable clamps / supports

within distribution boards cable alley.

( b ) All hinged door shall be earthed

through 2.5 sq mm tinned b raided copper

( c ) Pad locking of MCCB’s handles in

“OFF” Position.

( d ) All the C.T.s should be auto short

( e ) All the MCCB's should be with rotary

( f ) All incoming and outgoing air circuit

breakers shall be placed on middle

portion of the vertical in single tier

( g ) Any descripancy found in SLD & Boq

, it should be brought in the notice of the

client / consultant, and the decision will

be taken final by Client / consultant.

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at

415 V. having normal current rating

2.2.1 125A. with Fixed thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S. housing.

4 ICS=100% of ICU only 7976.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at

415 V. having Normal current rating

200A.with variable Thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S.housing. Overload

release Range: 84 - 125Amp

1 ICS=100% of ICU only 16061.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at

415 V. having Normal current rating

200A.with variable Thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections, spreader

tinned copper & complete erected in

existing 16 G.M.S.housing. Overload

release Range: 125 - 160Amp

1 ICS=100% of ICU only 16061.00 No

Providing and erecting Approved make

Three pole moulded case circuit breaker

having breaking capacity/strength ICU of

35 K.A. and above at 415 V. having

Normal current rating 200A.with variable

2.2.4 1 Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all

internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing.Overload release Range:

1 ICS=100% of ICU only 15421.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA.

and above at 415 V . having normal

current rating 250A. with variable thermal

& magnetic release suitable to work on

A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

1 ICS=100% of ICU only 20739.00 No

Providing and erecting Approved make

Three pole moulded case circuit breaker

having breaking capacity ICU of 25 K.A.

at 415 V having normal current rating up

to 25 A to 100A. with Fixed thermal &

magnetic release suitable to work on A.C.

supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

3 ICS=100% of ICU only 5302.00 No

Providing and erecting Approved make

Four pole moulded case circuit breaker

having breaking capacity ICU of 50 K.A.

and above at 415 V having normal

current rating up to 630A. with

Microprocessr release Adjustable

Overload Settings from 0.25 to 1 In (in

steps of 0.01) ,Conforms to IS/IEC

60947-2, suitable to work on A.C.supply

50 c/s. with all internal connections,

spreader tinned copper & complete

erected in existing 16 G.M.S. housing

1 ICS=100% of ICU only 37658.25 No

providing and erecting Approved make

Earth fault Relay suitable to mount with

inter connection suitable to following size

of moulded case circuit breaker having

CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all

internal connections & complete erected

in existing M.S.housing..

providing and erecting Miniature circuit

breaker single pole 0.5A to 2A system

2.2.9 20 and having breaking capacity 10 KA to 268.00 No

be erected in existing box. confirming to

IS 8828/1996 with ISI Mark

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996

Providing & erecting 240 V MCB double

pole switch for motor & inductive load

2.2.11 (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in

existing box having following capacity

Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C

2.2.12 Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity

Providing and erecting following

2.2.13 additional parts for panel mounting

(A)Extended operating rotary handle with

2.2.13a 10 pad lock with three position trip,off,on 865.00 No

suitable for 25A to 250 A panel mounting

(B)Extended operating rotary handle with

pad lock with three position trip,off,on

suitable for 400A to 630 A panel

Supplying and erecting approved make

panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel

board with all connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting approved make

panel mounting type Digital Ammeter

having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC

erected on existing panel board with all

connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting Ammeter /

Voltmeter selector switch for 3 phase AC

Supply 500 V on existing panel board

with necessary connections.

Providing & erecting L.T. Current

Transformer with bar primary 50/5 to

1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with

insulating materials connected to the

Supplying & erecting approved make

Power Factor Meter 150mm dia

flush/projection type/ balanced &

unbalanced load to work with

2.2.18 1 appropriately provided CT’s 100/5A to 5052.00 No

400/5A ratio & other accessories

complete erected in M.S. box &

connected to the circuit by means of PVC

copper Core leads.

Supplying and erecting approved make

suitable panel indicator LED type lamp,

lens cover, complete erected with

necessary connections.

Providing and erecting metallic vitrified

danger notice board as per language

2.2.20 4 suggested by engineer incharge for 69.00 No

MEDIUM VOLTAGE installation to be

erected as per IS-2551.

Providing and erecting required size

2.2.21 8 Aluminium strip for earthing of H.T. , OCB 223.00 KG

/ ACB / Transformer, LT panel board,

Motors etc. using copper clamp.

Providing and erecting required size

Copper strip for earthing of H.T. OCB /

ACB/ Transformer, LT panel board,

Motors etc. using copper clamp.

providng and erecting Approved make

energy meter 3 phase 4 wire unbalanced

2.2.23 3 load 500 V. 5 to 10A complete erected as 2179.00 No

directed with necessary earth wire.Class-

Providing , erecting , fabricating the M.S.

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars,

channels, sections complete with cutting,

2.2.24 250 welding, grinding & finishing duly painted 77.00 Kg

with one coat of red oxide with erection

on site as per direction of engineer in

charge with necessary grouting,

cementing, plastering & finishing

Supplying and erecting triple pole &

neutral 440V/ 500V panel mounting

Aluminium Busbars with four equal Nos.

of bus having current density not more

than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with

colour insulating tape for phase sequence

of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each

busbar,erected in existing cubical panel

with necessary connections.

2.2.25a 10 (A) Suitable for 100 Amp. Capacity 654.00 RnMtr

2.2.25b 18 (B) Suitable for 200 Amp. Capacity 1027.00 RnMtr

2.2.25c 18 (C) Suitable for 300 Amp. Capacity 1455.00 RnMtr

2.2.25d 30 (E) Suitable for 630 Amp. capacity 3031.00 RnMtr

Providing & erecting weather proof, dust

& vermin proof, floor mounted front

operated indoor type cubical panel board

necessary IP-42 and above protection as

per approval from engineer incharge

made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG

2.2.26 thick CRC M.S.sheet for internal

partitions with necessary accesories

supporting angles/ flats channel

including cutting, bending, drilling,

welding, riveting with internal partitions &

cable alley as per requirements &

instruction of engineer-in-charge with

supplied switch gears, BUSBARS,

suitable size of inter connecting PVC

copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange

- bolts-base Plates, sufficient nos. of

hinged doors, handles with locking

arrangement and rubber gasket,heavy

duty end terminal connection,danger

notice board,necessary

ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder

(The rates excludes the cost of

switchgears, bus bars, inter connecting

mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall

be measured excluding base beams) The

panel shall be supplied with following

approved manufacturers with following

(B) The standard companies switch gear

shall be used and only manufacturers at

CPRI approved factory

12 (i) with 350mm depth 14755.00 Sqmtr

Supplying & erecting XLPE(IS:7098)(I)-88

ISI unarmoured copper cable 1.1 KV

grade to be erected as directed of

following size.

2.2.27a 40 (N) 4 core 16 Sq. mm 721.00 Mtr

2.2.27b 50 (M) 4 core 10 Sq. mm 568.00 Mtr

2.2.27c 12 (L) 4 core 6 Sq. mm 361.00 Mtr

2.2.27d 90 (C) 2 core 6 Sq. mm 202.00 Mtr

2.2.27e 20 (B) 2 core 4 sq.mm 130.00 Mtr

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor

with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in

existing pipe of following size

(Specifically for control panel, relays,

power switchgears, motor starters &

control wiring) with required size of

copper lugs, nuts and bolts if required.

2.2.28a 300 (a) One wire 1.00 sq. mm 12.00 Mtr

2.2.28b 120 (b) One wire 1.50 sq. mm 17.00 Mtr

2.2.28c 100 (c) One wire 2.50 sq. mm 27.00 Mtr

Design, Supplying, installing, testing of

factory fabricated ready made Three

phase APFC Panel Cubical Panel

fabrication should be type tested as per

IEC 61921, 61439:1&2 Capacitor Duty

Contactor for switching as per following

Steps Incomer Switch of MCCB type

Icu=Ics=50KA at 400/440 Volts, with OC,

SC, internal earth fault protection Incomer

Switch of MCCB type Icu=Ics=50KA at

400/440 Volts, with OC, SC, internal earth

fault protection,Copper tinned insulated

Busbar,Cubical panel should be indoor

type with IP 43 and IK 10,Metalized

2.3 polypropylene film tye3-phase 528-

550Volt Capacitor,De tuning Reactor for

each capacitor,Panel having Short Circuit

and Overload protection,Each step

Capacitor having suitable MCB with Sc,

OL, internal earth fault relay,Each stage

having Stage Contactor (Capacitor load

rating),PF regulator master controller

having suitable steps with LCD display,

Rs 485 Communication port, Indication

LED Lamps for main incomer and ON-

OFF for each capacitor bank,MS Chanel

for Floor mounting, Cable entry as per

site situation,Cooling fans for panel, (

Supplying & erecting approved make IP

55 grade Company fabricated Timer

Panel of following capacity for switch On-

Off street lights on time scheduling basis

made from 16G CRCA sheet duly epoxy

power painted inside and outside with

2.4 hinged doors and locking arrangement

consisting of suitable size of 4 Pole MCB

and 4 pole contactor (cat-III)with analog

time switch, auto manual switch of same

make and suitable input and output

Bakelite terminals and with door earthing

approved by Engineer in charge.

MCBDBs and MCBs

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996

Providing & erecting 240 V MCB double

pole switch for motor & inductive load

2.6 (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in

existing box having following capacity

Providing & erecting 415 V MCB Four

Pole for Motor & Inductive Load (C

2.7 Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity

Sheets steel powder coated enclosure

2.8 4 suitable for incorporating One/Two nos. 175.00 E.a.

Providing and erecting Sheet Steel

powder coated MCB distribution board -

flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail,

2.9 Conforms to IS 8623-1 & 3, IEC 61439-1

& 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used

of same company of MCB to be used)

(A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

2.9.1 6 (i)4 way ( concealed manner ) 747.60 E.a.

2.9.3 6 (iii)8 way ( concealed manner ) 1369.20 E.a.

2.9.5 32 (iv)12 way ( concealed manner ) 1773.60 E.a.

(B) three phase incoming and single

2.10 phase horizontal type outgoing Per

phase isolation type (PPI)

(b) sheet steel double door

2.10.1 14 (i)4 way ( concealed manner ) 2779.20 E.a.

2.10.3 7 (ii)6 way ( concealed manner ) 3462.00 E.a.

2.10.5 5 (iii)8 way ( concealed manner ) 4054.80 E.a.

Supplying & erecting Sheet Steel powder

coated Cable end termination Box to be

mounted on Top or Bottom of the MCB

Distribution Box for housing/covering

Extra wires & Cables, suitable for

following size of MCB DB Box.

(G) Three Phase 8 Way ( concealed

2.11.2 2 (G) Three Phase 8 Way 683.00 E.a.

Providing and erecting Sheet Steel

powder coated Vertical MCB distribution

board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper

insulated busbar, isolated neutral bar,

2.12 earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3, suitable for

250 AMP TPN MCCB + RCCB as

incomer and three phase outgoing as per

following .(The DBs should be used of

same company of MCB to be used)

2.12.1 1 (A)4 way outgoing 9149.00 E.a.

2.12.2 3 (B)6 way outgoing 9823.00 E.a.

Providing & erecting 415 V MCB three

Pole for Motor & Inductive Load (C

2.13 Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box

having following capacity

providing and erecting Approved make

ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and

suitable for operation on single phase

V,50Hz. having characteristic of quick

action & tripping with all advance feature

& do not incorporate any electronic

component. for following Max. rating

erected as directed

Providing and erecting metallic vitrified

danger notice board as per language

2.15 55 suggested by engineer incharge for 69.00 E.a.

MEDIUM VOLTAGE installation to be

erected as per IS-2551.

Providing & erecting Medium Voltage

2.16 20 Danger Notice Board sticker as per 26.00 E.a.

language suggested by engineer

incharge of standard size as per IS-2551

SUB - TOTAL OF Switchgears , Panel

Follow IS code :3043 is the guideline

for the earthing

Providing and erecting required size HOT

3.1 340 deep Galvanised iron strip for earthing of 77.00 KG

H.T. , OCB/ ACB/ Transformer LT panel

board, Motors etc. using proper clamp.

Providing and erecting required size

Copper strip for earthing of H.T. OCB /

ACB/ Transformer, LT panel board,

Motors etc. using copper clamp.

3.3 15 Providing and erecting Annealed bare 787.00 KG

Copper wire 8 to 16 SWG.

3.4 80 Providing and erecting HOT deep 77.00 KG

Galvanised iron strip wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum

bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal

dia of 12mm with constant ohmic value

surrounded by highly conductive

compound with high charge dissipation

3.5 suitable for following type of applications

with chamber and heavy duty

cover.(approved make OEM has to

submit test certificate) & having back

filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 W/

meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should

be capable to retain moisture for long

time Necessary test report must be

(a) For Electrical Installation up to 440V in

3.5.1 4 Length of pipe - 1 Mtr 4546.00 E.a.

Back filling compound - 1 Nos Bag of

(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of

Supply, installation,testing and

commissioning of Chemical Earthing with

UL Certified 17.2mm Dia. X 3000mm

Long 254 Micron-Copper bonded M.S.

Rod manufactured as per IEC 62561-2

with 25Kg Bentonite powder plus " U "

bolt rod clamp complete with Lockable

high performence chamber suitable &

tested for 5000T capacity with SS

Hardware.or equivalent

Supplying & erecting funnel type earthing

having earth plate of following size burred

in specifically prepared earth pit 3 mtr.

below ground with 40 kg. charcoal and

salt with alternate layers of charcoal &

salt, 20mm.dia. G.I. pipe with Funnel with

a wire mesh for watering & bricks

masonry block, C.I. Cover complete as

3.7 per para 7.3 of IS 3043 with necessary

length of double Galvanised Iron / copper

earth wire No 6 SWG bolted with lug to

the plate and covered in 12 mm dia. G.I.

pipe 2.5 mtr long complete connected to

the nearest switch gear with end socket

as per direction & duly tested by earth

tester confirming to IS (As per drawing)

with following specification

(C) with 60 x 60x 0.315 cms. Copper

SUB - TOTAL OF Earthing

4 CABLES, Cable Termination and cable

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in

existing trench / pipe of following size of

Providing and erecting XLPE (IS:7098)(I)-

88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in

existing trench / pipe of following size of

4.2.1 65 (a) 4 core 4 Sq. mm 116.00 Mtr

4.2.2 400 (b) 4 core 6 Sq. mm 125.00 Mtr

Providing and erecting XLPE (IS:7098)(I)-

88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in

existing trench / pipe of following size of

4.3.1 95 (d) 4 core 16 Sq. mm 152.00 Mtr

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing

trench / pipe at road crossing or floor of

following size of cable.

4.4.1 35 (C) 3 core 6 Sq. mm 392.00 Mtr

4.4.2 75 (D) 3 core 10 Sq. mm 495.00 Mtr

Supplying & erecting XLPE(IS:7098)(I)-88

ISI unarmoured copper cable 1.1 KV

grade to be erected as directed of

following size.

40 (I) 3 core 16 Sq. mm 557.00 Mtr

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand / Solid

Copper conductor for 1.1 KV. to be laid

on wall with necessary clamps or in

existing trench / pipe at road crossing or

floor of following size of cables.

4.5.2 35 (B) 4 core 4 Sq. mm 361.00 Mtr

4.5.3 70 (C) 4 core 6 Sq. mm 505.00 Mtr

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid

on wall with necessary clamps or in

existing trench / pipe at road crossing or

floor of following size of cables.

4.6.1 80 (D) 8 core 2.5 sq.mm 315.00 mtr

Making trench in soft soil of suitable width

of 90 cm deep for laying cable or locating

4.7 280 the fault all over the run and back filling 55.00 Mtr

the same and making the surface as

Covering of cable with second class

bricks or cement tiles laid cover the cable

4.8 40 crosswise & also on both sides with 139.00 Mtr

covering of 7. 5 Cm. layer of sand above

& below cable (16 bricks per meter)

( A )Making trench in Hard Murrum / Tar

Road of suitable width of 90 cm or

required depth for laying any size of

cable or locating the fault all over the run

and back filling the same and making the

surface as normal ground.

4.10 5 (B) If additional machinery like hammer 354.00 Mtr

driller or JCB use [Add]

Drilling the road without breaking the road

surface (Asphalt) for laying of cable for

4.11 feeding power supply by making up to

following size of holes at both ends

4.11.1 5 (A) Up to 100 mm bore dia 488.00 Mtr

4.11.2 5 (B) Up to 150 mm bore dia 610.00 Mtr

Supplying following size of Light duty “A”

4.12 Class G.I . Pipe & erecting as directed by

Engineer-in-charge.

10 (A) 25 mm dia 171.00 Mtr

Providing & laying. R.C.C. Hume pipe for

cable to be laid 90 cm. below ground

across the road crossing or on floor with

necessary material in an approved

manner and making the ground as per

Providing & laying approved make

Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II

4.14 )with necessary connecting accessories

of same material at required depth in

existing trench for laying of cable. below

ground / road surface for enclosing cable

4.14.1 80 (A)50 mm outer dia 62.00 Mtr

4.14.2 300 (B)63mm outer dia 73.00 Mtr

4.14.3 50 (C))90 mm outer dia 95.00 Mtr

4.14.4 40 (D)120 mm outer dia. 136.00 Mtr

Providing & laying approved make ISI

marked Rigid PVC pipe having 6Kg / cm2

(Class-3) to be erected at road crossing

on or floor as directed for laying of cable.

The pipes as following size of dia &

weight per 6 mtr.

4.15.1 5 (D) 75 mm inner Dia. (5.5 Kg/6RMT) 124.00 Mtr

4.15.2 5 (F) 110 mm inner Dia. (11.63 Kg/6 RMT) 234.00 Mtr

Providing and, fixing heavy duty flange

type brass cable gland with rubber ring

4.16 for PVC insulated armoured cable

complete with out going tails, insulating

tape etc for following size of cables.

Providing and, fixing heavy duty flange

type brass double compression type

cable gland with rubber ring for PVC

insulated armoured cable complete with

out going tails, insulating tape etc for

following size of cables.

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of

4.18 following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

Solder less crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

Providing and fixing approved make

Perforated C type cable tray. Made from

sheet steel. The cable tray should be

single or double bended as per required

and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation

with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc.

erection with necessary support(

included) as per Specification and as per

instruction of engineer in charge..

SUB - TOTAL OF Cables,Cable

Terminations & Cable Trenches

5 Light Fixtures & Fans

Supply , Installation, testing and

commissioning of pre-wired, LED

fitting/post top luminaries etc of all types,

complete with all accessories and tube

etc. directly on ceiling/ wall, including

connection with 1.5 sq. mm FRLS PVC

insulated, flexible, copper conductor,

single core cable with flexible conduits

and coupler and earthing etc. as required.

Note:- The LED Light fixtures should

comply all international standards third

party ( LM 79 for complete fixture, LM

for individual LED ). The Manufacturer /

Channel Partner of the Manufacturer has

to submit 4- Years unconditional free

Replacement Guarantee for complete

Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be

made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,CCT 3000 K

to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency >

%( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description

have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge

may select any wattage capacity between

the ranges shown.)

( A ) Tube Light with integral / non integral

5.1.1a 10 (iii) 18-20 Watts, Surge - 2KV,IP-20, 293.00 No

conventional 2/ 4 feet

5.1.1b 55 (v) 36-40 Watts, Surge-2 KV, IP-20, 530.00 No

conventional 4 feet

(B) LED Panel Light with provision for

5.1.2 Plane front frame with translucent cover

fixed to housing complete.IP20

5.1.2a 30 (i)up to 8 Watts,4" x 4", Surge-2 KV 271.00 No

5.1.2b 235 (iii) 12-15 watts, 6" x 6", Surge-2 KV 462.00 No

5.1.2c 110 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV 607.00 No

5.1.2d 120 (vi) 36 watts, 24" x 24", Surge- 2KV 1777.00 No

5.1.3 (G) Spot Light 425 Lumens, Surge-2KV

5.1.3a 10 (a) 3 to 7 Watts 805.00 No

5.1.4 12 (H) Mirror Light 9 Watts, wall mounted 309.00 No

minimum 1 feet long

(I) Adjustable spot light with COB led

5.1.5 having aluminium reflector of following

5.1.5a 4 (ii) 12 Watts 957.00 No

5.1.5b 4 (iii) 15 Watts 1087.00 No

Providing & erecting Approved make

Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz

mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cm.

down rod erected with earthing.(Make

shall be approved by Engineer in charge))

Providing & erecting Approved make

Ceiling Fan with double ball bearing ISI

mark with condenser A.C.230V 50c/s.

5.3 50 1400 mm. sweep complete, canopy 1721.00 No

erected on existing hook or clamp with

earthing [ Make shall be approved by

Engineer in Charge]

Providing & erecting Approved make

Ceiling Fan with double ball bearing with

Condenser 230 volt A.C.50 Hz. 900 mm

sweep complete having 3 Aluminium

blades, canopy erected complete. [ Make

shall be approved by Engineer in Charge]

Supplying and erecting approved make

oscillating type medium duty bracket fan

with Aluminium Blades A.C. 23OV. 50cy/s

wall mounted with height adjustment and

5.5 6 rotary tilting device complete with guard, 2329.00 No

mounting accessories kit, pull cord for

speed and oscillation flexible Core plug

top complete erected with lead wires as

directed. 400MM.

Supplying & erecting approved make low

noise decorative exhaust fan having size

5.6 48 200mm with 1350 RPM with square 1687.00 No

frame ABS body with inbuilt lowers &

Supplying & erecting fan hook box of

mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and

5.7 180 pierced through a 16 Gauge M.S. box / 107.00 No

Heavy Duty PVC box complete erected

concealed in Ceiling with necessary