Loading…
Loading…
Tender Value
₹2.5 L
EMD Value
₹6,355
Closing Date
19 Dec 2022, 10:00 amClosed
The Assistant Engineer, LIDEW Section , Thikkodi
The Assistant Engineer, LIDEW Section , Thikkodi Grama Panchayat
Annual Plan-MANDATH WATER SUPPLY SCHEME IN WARD-14 IN THIKKODY GP PR.23/22-23-Retender
2022_LSGD_526570_2
AE/LSGD/TKD/17/2022-23
Open Tender
Civil Works - Water Works
Item Rate
240 days
THIKKODI GRAMA PANCHAYATH
Please refer Tender documents.
7 documents required · 7 mandatory
₹565
Yes
₹6,355
Yes
1 Feb 2023
8 Dec 2022
21 Dec 2022
8 Dec 2022
19 Dec 2022
8 Dec 2022
Amount
DWSS Related work
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.50.3:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
OD250870/2022-2023:Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Pipes, cables etc, not exceeding 80 mm dia
OD256169/2022-2023:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement &testing of joints complete as per direction of engineer in charge .75 mm dia 10 Kgf/cm2(modified 50.18.9.8.1without trenching and refilling)
OD256208/2022-2023:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement &testing of joints complete as per direction of engineer in charge .63 mm dia 10 Kgf/cm2(modified 50.18.9.7.1without trenching and refilling)
OD256366/2022-2023:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement &testing of joints complete as per direction of engineer in charge .50 mm dia 10 Kgf/cm2(modified 50.18.9.6.1without trenching and refilling)
OD256367/2022-2023:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement &testing of joints complete as per direction of engineer in charge .40 mm dia 10 Kgf/cm2(modified 50.18.9.5.1without trenching and refilling)
OD256386/2022-2023:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement &testing of joints complete as per direction of engineer in charge .32 mm dia 10 Kgf/cm2(modified 50.18.9.4.1 without trenching and refilling)
OD256385/2022-2023:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement &testing of joints complete as per direction of engineer in charge .25 mm dia 10 Kgf/cm2(modified 50.18.9.4.1 without trenching and refilling)
OD250914/2022-2023:Providing and fixing ball PVC valve of approved quality,high or low pressure complete 75 mm nominal bore .
OD250939/2022-2023:Providing and fixing PVC valve of approved quality high or low pressure 63 mm nominal size etc complete
OD250989/2022-2023: Providing and fixing PVC valve of approved quality,high or low pressure complete 50 mm nominal bore
OD257124/2022-2023: Providing and fixing PVC valve of approved quality,high or low pressure complete 40 mm nominal bore
OD257112/2022-2023: Providing and fixing PVC valve of approved quality,high or low pressure complete 32mm nominal bore
OD257113/2022-2023: Providing and fixing PVC valve of approved quality,high or low pressure complete 25 mm nominal bore
18.54.1:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms
ADHARSH K
Bidder Name
ADHARSH K
VINOD PN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_781543.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .